---------------------------------------------------------------------------------------- Scheduled Release 8.2310.0 (aka 2023.10) 2023-10-10 - 2023-10-04: Add CAP_NET_RAW capability due to the omudpspoof module The CAP_NET_RAW ensures the use of RAW and PACKET sockets, which is utilized by the omudpspoof module, more precisely the libnet_init function. Thanks to Attila Lakatos for the patch. - 2023-10-04: Add new global config option "libcapng.enable" Defines whether rsyslog should drop capabilities at startup or not. By default, it is set to "on". Until this point, if the project was compiled with --enable-libcap-ng option, capabilities were automatically dropped. This is configurable now. Thanks to Attila Lakatos for the patch. - 2023-10-04: tcp net subsystem: handle data race gracefully It may happen that a socket file descriptor has been closed either while setting up poll() et al or while being inside the system call. This was previously treated as error and caused abort in debug builds. However, it was essentially ignored in production builds. This has now been fixed and now is always gracefully ignored. This most importantly fixes some flakes in CI runs (which were caused by this situation). - 2023-09-29: imrelp bufgifx: avoid crash on restart in imrelp SIGTTIN handler While existing, if at specific time rsyslog receives a SIGTTIN, it crashes due to 2 issues. 1. debug.unloadModules="off" a double free of pRelpEngine 2. debug.unloadModules="on" it crashes because the signal handler has been unmapped from memory. This patch covers both issues. Thanks to Ali Abdallah for the patch. - 2023-09-28: fix startup issue on modern systemd systems When we startup AND are told to auto-background ourselfs, we must close all unneeded file descriptors. Not doing this has some security implications. Traditionally, we do this by iterating over all possible file descriptor values. This is fairly compatible, because we need no OS-specific method. However, modern systemd configs tend to not limit the number of fds, so there are potentially 2^30(*) fds to close. While this is OKish, it takes some time and makes systemd think that rsyslog did not properly start up. We have now solved this by using the /proc filesystem to obtain our currently open fds. This works for Linux, as well as Cygwin, NetBSD, FreeBDS and MacOS. Where not available,and close_range() is available on the (build) platform, we try to use it. If that fails as well, we fall back to the traditional method. In our opionion, this fallback is unproblematic, as on these platforms there is no systemd and in almost all cases a decent number of fds to close. Very special thanks go out to Brennan Kinney, who clearly described the issue to us on github and also provided ample ways to solve it. What we did is just implement what we think is the best fit from rsyslog's PoV. (*) Some details below on the number of potentially to close fds. This is directly from a github posting from Brennan Kinney. Just to clarify, by default since systemd v240 (2018Q4), that should be `1024:524288` limit. As in the soft limit is the expected `1024`. The problem is other software shipping misconfiguration in systemd services that overrides this to something silly like `LimitNOFILE=infinity`. - Which will map to the sysctl `fs.nr_open` (_a value systemd v240 also raises from `2^20` to 2^30`, some distro like Debian are known to opt-out via patch for the `fs.nr_open` change_). - With the biggest issue there being that the soft limit was also set to `infinity` instead of their software requesting to raise the soft limit to a higher value that the hard limit permits. `infinity` isn't at all sane though. - The known source of this misconfiguration is container software such as Docker and `containerd` (_which would often sync with the systemd `.service` config from the Docker daemon `dockerd.service`_). closes https://github.com/rsyslog/rsyslog/issues/5158 - 2023-09-13: Add the 'batchsize' parameter to imhiredis Parameter set to allow configuring the amount of entries imhiredis debatches at once. Default value of '10' has been kept to avoid any side effect on existing configurations. Thanks to Jérémie Jourdin for the patch. - 2023-09-13: omprog bugfix: Add CAP_DAC_OVERRIDE to the bounding set The omprog module uses the execve() function to execute a third party program. Some required capabilities were not preserved in the bounding set [1]. This caused problems, e.g. the program could not write to files even if rsyslog was executed as root and privileges were not dropped. As of now, only the CAP_DAC_OVERRIDE capability is added to the bounding set. Others could be added later, if there is justification behind that. [1] The capability bounding set is a security mechanism that can be used to limit the capabilities that can be gained during an execve(2). During an execve, the capability bounding set is ANDed with the file permitted capability set, and the result of this operation is assigned to the thread's permitted capability set. The capability bounding set thus places a limit on the permitted capabilities that may be granted by an executable file. Thanks to Attila Lakatos for the patch. - 2023-09-13: tcpflood bugfix: plain tcp send error not properly reported The error code when plain tcp sending failed was improperly returned, resulting in no meaningful error message. Note: tcpflood is a testbench tool, not part of production rsyslog. ---------------------------------------------------------------------------------------- Scheduled Release 8.2308.0 (aka 2023.08) 2023-08-15 - 2023-08-07: crypto subsystem bugfix: potential undefined behaviour The is some potential undefined behaviour when initializting the IV for locally encrypting log files. The issue cancels itself out, but at least causes some confusion when using undefined behaviour sanitizer (UBSAN). However, UBSAN seems not to detect the issue on all platforms and/or in all versions (we were not able to reproduce this issue in our CI). Please also note that the functionality where this can happen is extremely rarely being used. Thanks to Jeffrey Walton for providing the patch. - 2023-08-02: lookup tables: fix static analyzer issue If something goes really wrong, a lookup table's name would not be set. That could lead to a NULL pointer access. HOWEVER, this would require serious bugs in config parameter parsing, as the lookup table name is a required parameter and the parser will error out if not set. So the bug is mostly cosmetic - but it does not hurt to handle this case, of course. - 2023-08-02: lookup tables bugfix: reload on HUP did not work when backgrounded Lookup tables were only reloaded on HUP if the -n option was given and rsyslog no backgrounded. This patch fixes the issue. closes: https://github.com/rsyslog/rsyslog/issues/4813 - 2023-07-30: testbench: make test more reliable There was a race between tcpflood and rsyslog in imptpc_maxsessions.sh. We now use the new -A tcpflood option to make the timing more predictable, hopefully fixing test flakiness. Note: if that does not help, we need to introduce a wait on the number of error messages and maybe a delay before tcpflood termination. The theory behind the latter is that rsyslog possibly does not fully iniaitlize session which are quickly aborted before rsyslog receives the related OS notification! We just record this info in case we need it and are positive that this change will fix the situation. - 2023-07-28: openssl: make connection setup more reliable by use of newer lib feature Replaced depreceated method SSLv23_method with TLS_method. In OpenSSL 1.1.0 and higher, SSLv23_method causes some errors in TLS handshake from time to time. As this method is depreceated since 1.1.0, I have replaced it with the follow up method TLS_method which is the most generic one. It fixes the random test failures in tests like - sndrcv_tls_ossl_anon_rebind.sh Also added some debug output in OpenSSL error handling, which is useful when analysing debug files. closes: https://github.com/rsyslog/rsyslog/issues/5201 - 2023-07-28: testbench improvement: define state file directories for imfile tests Not all imfile tests have state file directories or a global working directory defined. This results in usage of the default location. While state file names should be sufficiently different, there is still some riks of using the same name in different tests. That becomes problematic if tests are run in parallel (and they are run in parallel inside the regular CI). NOTE: NOT YET COMPLETED FOR ALL TESTS! We are considering if it makes sense to deliberately keep some as-is. - 2023-07-28: tcpflood bugfix: TCP sending was not implemented properly Note: tcpflood is a testbench tool. This bug could lead to testbench false positives. No way it can affect production deployments. The tcpflood tool did improperly assume that a TCP sendto() call would send messages of any size in a single shot. This is not the case. It has now been corrected to proper behavior. As a side-activity, some int variables which acutally needed to be size_t have been fixed as well. - 2023-07-28: testbench: make waiting for HUP processing more reliable The previous approach was more or less delay based. We have now changed the code to enable imdiag to detect if HUP is underway and wait until it is completed. The new method still employs some kind of timeout, but is now quite reliable. Most importantly, it works great with long-running HUP processing, which can happen e.g. when querying the system name takes long or some actions need longer time to persist their HUP processing. The new approach will most likely reduce CI flakes and also speed up testbench runs. The speedup happens from not having to wait a full delay in cases where we detect HUP is completed (plus reduced timeout when we cannot clearly detect this - see code comments why the new method is still considered more reliable than the old one). Code note: we needed to slightly re-structure the way actual HUP processing and the "HUP mutex" is handled. After best analysis, this does not affect the reliability or speed in production settings. closes https://github.com/rsyslog/rsyslog/issues/5192 - 2023-07-27: build system: make rsyslogd execute when --disable-inet is configured This option is mostly useless, as network functionality depends on the modules loaded by the config. The only real, and important, effect it has is to control auto-load of omfwd - a feature almost all installations depend in (backward compatibility). This has been clarified in ./configure -help Also, when --disable-inet is given, rsyslog now executes successfully. The reason for the abort was that previously building of the lmnet component was prevented, but that component is also needed by rsyslog startup itself to query its own (correct) hostname. Note that --disable-inet still does not compile some networking libraries. So do not use it if you intend to load standard networking modules like omfwd, imtcp or imudp. closes https://github.com/rsyslog/rsyslog/issues/5188 - 2023-07-26: testbench/CI: update zookeper download to newer version Old version is no longer available. - 2023-07-24: openssl: add support for new-version init function - 2023-07-07: add CRL support for network (TLS) drivers Thanks to Darren J Moffat for implementing the OpenSSL part. - 2023-07-07: omazureeventhubs: Initial implementation of new output module The output module uses Apache "Qpid Proton C API" which is a solid AMQP protocol library implementation that can be integrated very well into the rsyslog dev environment. - Implemented Delivery with submitted and accepted state checking - saving of failed messages in a failed list with support of saving and restoring. - Add testcases (requires ENV variables) to testbench - Using application/octect-stream (binary) to send messages based on Microsoft Code Sample: https://docs.microsoft.com/en-us/azure/event-hubs/event-hubs-c-getstarted-send * Note original Microsoft Samplecode is not working anymore, we are using * QPID Proton Proactor based on https://github.com/apache/qpid-proton/blob/main/c/examples/send.c - requires QPID-PROTON Version 0.13 or higher because of the proactor API - Add EventProperties configuration parameters - Slow down when sender credit reaches zero (10ns). - Add support for static library linking of qpid-proton This is needed to build the module from source and remove library package dependencies. - adjusted valgrind suppressions - 2023-07-04: core bugfix: action.resumeintervalmax parameter was not respected Unfortunately, defining action.resumeintervalmax in the configration did not have any effect at all. Instead, the default value was used, which is 1800. This was caused by not having all the letters in lower-case. Fixes https://github.com/rsyslog/rsyslog/issues/5132 Thanks to Attila Lakatos for the patch. - 2023-06-29: core bugfix: do not try to drop capabilities when we don't have any In case the process does not have any capabilities, e.g. running as regular user then we do not have to force capability dropping. The capng_have_capabilities() returns none if that's the case. Fixes https://github.com/rsyslog/rsyslog/issues/5091 Thanks to Attila Lakatos for the patch. - 2023-06-29: imhiredis bugfix: Restore compatiblity with hiredis < v1.0.0 RESP3 protocol wasn't implemented yet, some types weren't available (REDIS_REPLY_DOUBLE) Thanks to Théo Bertin (frikilax) for the patch. - 2023-06-23: testbench: use newer zookeeper version in tests - 2023-06-23: build system: more precise error message on too-old lib When libcap-ng was enabled, the lib was present but did not meet the minimum version dependency during configure, it was reported as "missing". We now emit a message telling that it is present, but the version too old. ---------------------------------------------------------------------------------------- Scheduled Release 8.2306.0 (aka 2023.06) 2023-06-20 - 2023-06-19: mmnormalize bugfix: if msg cannot be parsed, parser chain is stopped When an parser is not able to parse a message, it should indicate this to rsyslog core, which then activates the next parser(s) inside the configured parser chain. Unfortunatley, mmnormalize always tells core "success", and so no other parsers are activated. closes https://github.com/rsyslog/rsyslog/issues/5148 - 2023-06-19: [i/o]mhiredis: various fixes and enhancements please see the change log for details. Among others, suspending of the modules has been fixed. Also a new "stream" mode has been added. Thanks to Théo Bertin (frikilax) for the patch. - 2023-06-19: testbench/bug: mmexternal-SegFault-empty-jroot-vg.sh fails due to typo Fix the typo that makes the test fail. Thanks to Paul Fertser for the patch. - 2023-06-16: imjournal: Add FileCreateMode module parameter FileCreateMode allows to set the default file mode bits when creating new files. As of now, it has only impact on the state file. Add test suite as well. Minor indentation fix in run_journal.yml Thanks to Attila Lakatos for the patch. - 2023-06-16: core bugfix: potential segfault on busy systems This was discovered by Konstantin J. Chernov in a practicaly deployment. Here, msg object tag processing caused sporadic segfaults. We did not hear from similiar cases, but there clearly is potential for problems because a mutex lock had insufficient range, thus leading to a potential race. The patch is directly from Konstantin J. Chernov, thanks for that. Please note that the mutex lock could be minimized as it is not strictly needed for the pM == NULL case, but this cause is extremely exotic and the resulting code would be harder to understand. Thus we opt to do the locking on funtion level (as usual). Descriptiond edited by Rainer Gerhards closes: https://github.com/rsyslog/rsyslog/issues/5110 - 2023-06-16: Add new global config option "libcapng.default" Defines how rsyslog should behave in case something went wrong when capabilities were to be dropped. Default value is "on", in which case rsyslog exits on a libcapng related error. Thanks to Attila Lakatos for the patch. Closes https://github.com/rsyslog/rsyslog/issues/5096 - 2023-06-05: imfile bugfix: file handle leak, primarily in kubernetes context At this point there is a code imfile.c#L919 that adds an inotify observer to the parent of the symbolic link target. But there is no such code that removes this observer in the case when inotify events do not occur in the directory tree above. This may be if the directory tree of the symbolic link target and the directory tree of the symbolic link itself are divided into different subtrees somewhere at the levels above. For example, in the rsyslog configuration, an imfile with the template /var/log/containers/*.log is configured and there is the following directory tree: /var/log/pods/pod-1/a/0.log /var/log/containers/pod-1-a-0.log -> /var/log/pods/pod-1/a/0.log In this example, kubernetes cron jobs will permanently delete directories at the /var/log/pods/pod-* level. And thus, inotify observer on the parent object of the symbolic link target (/var/log/pods/pod-1/a/0.log) looking at the directory /var/log/pods/pod-1/a will constantly leak. This is due to the fact that the list of active objects in the edge with path /var/log/containers, where the parent object of the target symbolic link is added, is not checked. Verification and deletion will occur only in the case of an inotify event in the upper nodes of the directory tree, in /var/log and above. Thanks to Sergey Kacheev for the patch! - 2023-06-05: GNUTls Driver: Fix memory leaks in gtlsInitCred Missing CA Certificate or multiple Connections caused a memory leak in pThis->xcred as it was allocated each time in gtlsInitCred by gnutls_certificate_allocate_credentials closes: https://github.com/rsyslog/rsyslog/issues/5135 - 2023-05-24: CI: update base ubuntu image for github actions ---------------------------------------------------------------------------------------- Scheduled Release 8.2304.0 (aka 2023.04) 2023-04-18 - 2023-04-17: imptcp bugfix: spam log on oversize message If an oversize message was received by imptcp, imptcp reported one error message for EACH oversize character. This could result in a potentially very large number of similar (and useless) messages. This is a regression from commit f052717178. closes https://github.com/rsyslog/rsyslog/issues/5078 - 2023-04-17: core/bugfix: using $uuid msg prop can deadlock rsyslog on shutdown This problem can occur if a large number of threads is used and rsyslog cannot shut down all queues etc within the regular time interval. In this case, it cancels some threads. That can leave the mutex guarding libuuid calls locked and thus prevents other, not yet cancelled threads from progressing. Assuming pthread_mutex_lock() is not a cancellation point, this will case these other threads to hang forever and thus create a deadlock situation. closes https://github.com/rsyslog/rsyslog/issues/5104 - 2023-04-17: Do not preserve capabilities when changing credentials In configurations where $PrivDropToGroup or $PrivDropToUser are used, rsyslogd changes uid/gid to a non-privileged user. As part of that change, all capabilities should be lost. However, if rsyslog is compiled with --enable-libcap-ng option, some capabilities are preserved due to using capng_change_id() instead of setgid()and setuid(). https://linux.die.net/man/3/capng_change_id: This function preserves capabilities while changing uid/gid, causing rsyslogd to run as non-root user, but with some root capabilities. Unfortunately, rsyslogd will run with higher privileges than before. The patch also removes CAP_SETPCAP, because the capability set does not need to be altered at a later phase. Thanks to Attila Lakatos for the patch. ---------------------------------------------------------------------------------------- Scheduled Release 8.2302.0 (aka 2023.02) 2023-02-21 - 2023-01-27: core/template: implement negative position.to This will easily permit to drop the last n characters from a property without the need to know the exact length of the string. This is especially useful as the exact length is most often not known beforehand. - 2023-01-18: Introduce --enable-libcap-ng configure option The option allows to drop the capabilities to only the necessary set, to minimize security exposure in case there was ever a mistake in a networking plugin or some other input resource. Moreover, it adds ability to change uid and gid while retaining the previously specified capabilities. Add ability to change uid and gid while retaining the capabilities previously specified. closes https://github.com/rsyslog/rsyslog/issues/4986 Thanks to Attila Lakatos for the patch. - 2023-01-16: - omfile: add action parameters "rotation.*" Add new action parameters - rotation.sizeLimit - rotation.sizeLimitCommand provide automatic output file rotation functionality feature-wise equivalent to legacy $outchannel. This finally permits to use this feature set in rscript. - core substring function: enhancement and hardening Now, length can have a negative value -n to denote that the substring should be build between startpos and the character -n chars from the end. This is a shortcut for stripping charactes on "both ends" of the string. See doc for details on the enhanced semantics. Also, some hardening against invalid startpos and length has been added. - core bugfix: wrong type conversion in internal string class could lead to segfault This could only happen with very unusually large strings Thanks to Flos Lonicerae for the patch. - QA: changed to CodeQL scanning on github as LGTM replacement - bugfix: wrong version number on daily stable builds - CI: use newer version of zookeeper (needed modernization) - ffaup bugfix : memory corruption with concurrent workers The ffaup function fails to work properly when it is used with multiple workers. The faup_handler_t struct is not supposed to be shared between threads. This may have caused memory corruptions and race conditions when used inside of actions. Thanks to Thibaud Cartegnie for the fix. - openssl bugfix: undefined reference error on OpenSSL 1.1 or higher. This could have prevented ossl components from being loaded/used. - 2023-01-02: core bugfix: template system may generate invalid json When - a list template - is created with option.jsonf="on" - and the last list element is a property with onEmpty="skip" - and that property is actually empty invalid JSON is generated. The JSON string in this case ends with ", " instead of "}\n". This patch fixes the issue. closes https://github.com/rsyslog/rsyslog/issues/5050 ---------------------------------------------------------------------------------------- Scheduled Release 8.2212.0 (aka 2022.12) 2022-12-06 - 2022-12-05: testbench: make python http server based tests more reliable Harden them against races during server port assignment. Prevents testbench flakes. - 2022-12-05: omprog bugfix: invalid status handling at called program startup There is a bug when external program *startup* does not return "OK". This can also lead to a misadressing with potentially a segfault (very unlikely). Note that no problem exists once the initializiation phase of the external program is finished and regular message transfer runs. The problem basically is that for a startup failure, the control data for that external program instance is freed on error. Unfortunately, that state data is needed later on to detect a suspended instance. We now keep the control data even on init failure (as we then need to do normal control options). closes https://github.com/rsyslog/rsyslog/issues/4967 - 2022-11-29: testbench bugfix: wrong message injection object of instance 1 In some client-server test cases, messages are supposed to be injected into the instance 2(client), but they are actually injected into instance 1(server), which may lead to false negative results. This patch fixed it by replacing 'injectmsg' with 'injectmsg2', and dealt with some minor issues. Thanks to Guodong Zhu for the patch. - 2022-11-21: rsyslog.conf man page bugfix: description of selectors Document historic difference to BSD syslog selectors. - 2022-11-18: imtcp bugfix: legacy config directives did no longer work Many "$InputTCPServer..." config directives did no longer work and were completely ignored (e.g. "$InputTCPServerStreamDriverMode"). This was a regression from a08591be5d9 (May, 5th 2021). closes https://github.com/rsyslog/rsyslog/issues/5021 - 2022-11-16: ksi bugfix: sending of too many signing requests fixed. As there is a bug in libksi where too many signing requests may have bene sent out the amount of signing requests will be limited by KSI module until the fix is implemented. Thanks to Taavi Valjaots for the patch. - 2022-11-14: bugfix: prevent potential segfault when switchung to queue emergency mode When switching to Disk queue emergency mode, we destructed the in-memory queue object. Practice has shown that this MAY cause races during destruction which themselfs can lead to segfault. For that reason, we now keep the disk queueu object. This will keep some ressources, including disk space, allocated. But we prefer that over a segfault. After all, it only happens after a serious queue error when we are already at the edge of hard problems. see also: https://github.com/rsyslog/rsyslog/issues/4963 - 2022-11-08: ksi bugfix: Segmentation fault in async mode fixed Thanks to Taavi Valjaots for the patch. - 2022-11-02: imjournal: add second fallback to _COMM If SYSLOG_IDENTIFIER is not present in the journal message, then lookup the _COMM field, which stands for the name of the process the journal entry originates from. This is needed in order to be in compliance with the journalctl output. Thanks to Attila Lakatos for the patch. - 2022-10-25: core bugfix: local hostname invalid if no global() config object given The local hostname is invalidly set to "[localhost]" on rsyslog startup if no global() config object is present in rsyslog.conf. Sending a HUP corrects the hostname. This is a regression from ba00a9f25293f closes https://github.com/rsyslog/rsyslog/issues/4975 closes https://github.com/rsyslog/rsyslog/issues/4825 - 2022-10-25: testbench bugfix: fixed timing issue that sometimes lead to test failure Timing caused a race in test tool sync and could lead to premature termination of tools, which in turn caused test failure ---------------------------------------------------------------------------------------- Scheduled Release 8.2210.0 (aka 2022.10) 2022-10-18 - 2022-10-13: fix NetBSD build issue On NetBSD, time_t has for a long time now been __int64_t. On 32-bit CPUs, the compiler is not obliged to define __sync_bool_compare_and_swap_8, so instead this ends up as an undefined symbol when linking rsyslog. This makes the code fall back to the pthread / locking method on these systems, but at least lets the program build. Thanks to Havard Eidnes for the patch. - 2022-10-12: omrabbitmq: Add TLS support Thanks to github user 21stcavenan for the patch. - 2022-09-14: config: add "abortOnFailedQueueStartup" global config parameter similiar to "abortONUncleanConfig", this parameter aborts rsyslog when a queue has problems during startup. Some users perfer rsyslog to terminate in this case. By default, nothing changes. closes https://github.com/rsyslog/rsyslog/issues/4902 - 2022-09-07: cor bugfix: leak in helper function SetString A part of rsyslog runtime, SetString(), had a small memory leak when a value was assigned multiple times. While this could potentially consume larger amounts of memory, this did not happen in practice. The reason is that multiple assignments to the same object occur very seldom. Thanks to github user seuzw930 for the patch. closes: https://github.com/rsyslog/rsyslog/issues/4961 - 2022-09-07: core bugfix: correct local host name after config processing rsyslog.conf may affect the host's local name. These changes were so far only activated after the first HUP. This patch now ensures that the configured local host name is applied correctly throughout all processing, including early startup. This patch causes a slight change of behaviour. However, the behaviour was inconsitent before. Now it is consistent and according to the config. Please note: this patch also exposes a global entry point via "regular" dynamic loading as this makes things much easier to do. This is in-line with ongoing simplification effort. Finally, we also remove a CI test that we do no longer need because the problem covered is now addressed differently and the original issue can no longer occur. closes https://github.com/rsyslog/rsyslog/issues/4975 - 2022-08-31: imtcp: add option notifyonconnectionopen Add this both as module an input parameter. Complements already-existing config param notifyonconnectionclose and mirrors the similar feature from imptcp. The module parameter acts as default, similarly to notifyonconnectionclose. Note that in contrast to imptcp, we emit IP addresses and not host names. This sticks with the traditional semantics of imtcp. Note that we also fixed a mislading error message in the case when a disallowed sender tried to connect. Thanks to John Chivian for suggesting the addition. - 2022-08-26: openssl TLS driver: add mechanism to include extra CA files parameter This change allows to include extra CA files so that no "unable to get issuer certificates" issue is obtained when using chained cert files. New parameter name is "NetstreamDriverCAExtraFiles". Thanks to Sergio Arroutbi for the patch. closes: https://github.com/rsyslog/rsyslog/issues/4851 - 2022-08-19: fix compile issue with older gcc compilers Thanks to Julien Thomas for the contribution. ---------------------------------------------------------------------------------------- Scheduled Release 8.2208.0 (aka 2022.08) 2022-08-09 - 2022-08-09: ksi bugfix: request cache size and send timeout issue fixed. Async service send timeout is not configurable and request cache size is too small to handle large amount of signing requests with small amount of permitted requests per aggregation round. For example user with max_requests = 4 results cache size 5 * max_requests or at least 256. When signing 300 log files cache will be too small resulting several unsigned blocks. When signing 200 log file cache will be adequate, but with rate of 4 signatures per second, it is only possible to sign 4 * 10 blocks before all requests that are not sent out will timeout. Fix for the issue is to make send timeout configurable and make the size of the cache depend on the value of send timeout. New configuration value sig.block.signtimeout="time, s" introduced that defines the time window wherein the block has to be signed. The size of the request cache is increased to 3 * max_requests * sign_timeout or at least 256. Thanks to Taavi Valjaots for the patch. - 2022-08-09: imjournal bugfix: segmentation fault in close journal Thanks to github user t-feng for the patch. - 2022-08-09: net subsystem: support sha256 for StreamDriverAuthMode="x509/fingerprint" Thanks to github user codemaker219 for the patch. - 2022-08-05: imfile bugfix: message loss/duplication when monitored file is rotated When a to-be-monitored file is being rotated, some messages may be lost or duplicated. In case of duplication, many file lines may be duplicated depending on actual timing. The whole bug was primarily timing depenedent in general. It most often was visible in practice when the monitored file was very frequently rotated (we had some report with every few seconds). Note that while we try hard to not lose any messages, input file rotation always has some loss potential. This is inevitable if the monitored file is being truncated. Also note that this bugfix affects imfile, only. It has nothing to do and no relation to rsyslog output files being rotated on HUP. closes: https://github.com/rsyslog/rsyslog/issues/4797 - 2022-08-05: ksi bugfix: optimize processing of signer queue to fix delays. There is a worker queue where rsyslog KSI module collects events and signing requests. When queue is processed thread is periodically put to sleep. Previous implementation handles signature requests well but sleeps every time after handling new file open / close event. When several log files are opened or closed simultaneously process is significantly slowed down. Another issue is that thread always sleeps 1000ms that may be 2x longer than aggregation round. This slows down overall signing process. Fix for the issue is to simply not sleep after file open / close event if there are next items to be processed. To speed up the signing process, rsyslog uses KSI aggregator conf. to obtain the aggregation period that is used for the sleep time configuration. Thanks to Taavi Valjaots for the patch. - 2022-08-04: ksi bugfix: possible crash fixed when several log files are opened. KSI module in async mode used to request aggregator conf. every time a log file was opened. When several log files were opened simultaneously corresponding amount of pointless concurrent conf. requests were posted. Concurrent conf. requests lead to a bug in libksi, where internal count of pending requests was not decremented correctly causing system to crash. Fix for the issue is to optimize the frequency of conf. requests so that only one conf. requests is handled at once. Instead of checking conf. every time log file is opened, conf is requested periodically after conf timeout. This will affect both sync and async mode. New option for KSI module introduced - sig.confinterval="time, s". Thanks to Taavi Valjaots for the patch. - 2022-08-04: openssl: add support to split tls commands by semicolon - Add support to split tls commands by semicolon. - Changed one test with multiple tls commands to use semicolon as separator instead of newline. closes: https://github.com/rsyslog/rsyslog/issues/4852 - 2022-08-04: openssl subsystem bugfix: build issue on Solaris Needed header file was added. Platforms other than Solaris did not actually need it, so this bug was discovered late. Thanks to Jakub Kulík for the patch. Import when index() is used. - 2022-08-04: openssl: add more details to error messages - Avoid LogMsg outputs osslEndSess on successfull terminated connection. Only LogMsg if the connection was terminated unsuccessfully. - Handle SSL_ERROR_SYSCALL in both Send / osslRecordRecv, do not log as error if underlaying socket was terminated (ECONNRESET). Log as information instead. closes: https://github.com/rsyslog/rsyslog/issues/4946 - 2022-08-04: omclickhouse: capture additional exceptions - DB::NetException - DB::ParsingExceptions Thanks to Victor Kustov for the patch. - 2022-08-04: mmanon bugfix: Simplified and fixed IPv4 digit detection. - Fixed an issue with numbers above int64 in syntax_ipv4. Numbers that were up to 256 above the max of an int64 could incorrectly be detected as valid ipv4 digit. - Simplified the IPv4 digit detection function and renamed to isPosByte. - added testcasse for malformed IPvc4 addresses closes: https://github.com/rsyslog/rsyslog/issues/4940 - 2022-07-21: imptcp: slight tuning - reduce indirect addressing to obtain more speed - also a fix for an annoying typo - minor other optimizations - modernization of one test - 2022-07-20: template procesing/json: performance optimization - 2022-07-19: core bugfix: memory leak when free action worker data table During free action worker data table when action destruct, worker instance in worker data table were not null. It resulted in memory leak. Thanks to github user seuzw930 for the patch. - 2022-07-13: omfile: support for zstd compression The zstd library provides better and faster compression than zlib. This patch integrates zstd as a dynamically-loadable functionality. As such, no further dependencies need to be added to the rsyslog base package. Due to the increased performance, usage of zstd is highly recommended for high-volume use cases. This patch also refactor zlib compression in order to unify handling in both compression cases. - 2022-07-07: stream cleanup: move error message to debug log, only This error message is most probably rooted in a kernel problem. At least knowbody knows how it can happen. It's definitely not a rsyslog issue. We also can recover from it for a long time now so there is no reason to irritate users by emitteing this "error" message. - 2022-07-04: mmdblookup bugfix: Don't crash Rsyslog on mmdb file errors Thanks to Théo Bertin (frikilax) for the patch. - 2022-06-28: build error fix: libbson requires out-of-date language constructs - 2022-06-27: OpenSSL: fix depreacted API issues for OpenSSL 3.x - OpenSSL error strings are loaded automatically now - Debug Callback has changed - See for more: https://www.openssl.org/docs/manmaster/man7/migration_guide.html closes: https://github.com/rsyslog/rsyslog/issues/4912 ---------------------------------------------------------------------------------------- Scheduled Release 8.2206.0 (aka 2022.06) 2022-06-14 - 2022-05-25: omelastisearch: allow omitting _type field Allow omitting the _type field by setting it to an empty string. Setting this field has been deprecated since 6.0, and support will be removed in 8.0 Also add testbench test for empty searchType with ES 7.0 This checks for messages in the deprecation log and also provides avoids deprecation messages from usage of transport.tcp.port in the test configuration Thanks to Jarkko Oranen for the patch. - 2022-05-18: tcpsrv/imtcp: slight performance improvements This change slightly improves performance for tcpsrv-based servers. This affects imtcp and imgssapi as well as some helpers. No other functional change is included in this change. - 2022-05-12: imptcp bugfix: worker thread starvation on extreme traffic When connectes were totally busy, without any pause, the assigened worker did never terminate its reading loop. As such, it could not service any other conenctions. If this happened multiple time and to all configured workers, all other connections could not be processed at all. This extreme scenario is very unlikely, as the whole issue is relatively unlikely. In practice, the issue could lead to somewhat degraded performance and resolved itself after some time (in practice no connection is 100% busy for an extended period of time). Note that this patch sets a fixed limit of 16 iterations for very busy connections. This sounds like a good compromise between non-starvation and performance. The exact number may be made configurable if there is really need to. - 2022-05-11: omelasticsearch: several support option for ElasticSearch 8 - config params searchIndex and documentType can be empty - support for Data Stream API Thanks to github user EHerzog76 for these changes. - new config param esVersion.major - 2022-05-09: tcp receiver bugfix: delay/potential hang on some error conditions Error were not correctly handled in some cases for imtcp and imgssapi. This could lead to a temporary stall of some connections. For ultry-low traffic systems, this stall could stay for a long period of time. In most cases, it was resolved very quickly. Note that imptcp was not affected. Thanks to Iwan Timmer for the fix. - 2022-05-05: net bugfix: potential buffer overrun there is heap buffer overflow vulnerability in rsyslog tcp reception components. This can only happen in octet-counted mode, which is enabled by default. Affected components: imtcp, imptcp, imhttp, imgssapi, imdiag when octet-counted framing was enabled. If the receiver ports are exposed to the public Internet AND are used without authentication, this can lead to remote DoS and potentially to remote code execution. It is unclear if remote code execution is actually possible. If so, it needs a very sophisticated attack. When syslog best practices with proper firewalling and authentication is used, thean attack can only be carried out from within the Intranet and authorized systems. This limits the severity of the vulnerability considerably (it would obviously require an attacker already to be present inside the internal network). Credits to Peter Agten for initially reporting the issue and working with us on the resolution. fixes CVE-2022-24903 Advisory: https://github.com/rsyslog/rsyslog/security/advisories/GHSA-ggw7-xr6h-mmr8#advisory-comment-72243 - 2022-05-05: imptcp: set OS worker thread name We now set the worker thread names to "imptcp/" where is the numerical index (0, 1, ...) of the worker thread. This enables to distinguish individual worker threads in OS tools like htop. That is useful for performance testing and system monitoring. The choosen name format is consistant with other similar thread names inside rsyslog. For imptcp, worker threads were not yet given individual names. Note: "in:imptcp" is imptcp's "main" thread, which also is used as a worker in some scenarios. This name was not modified. - 2022-04-26: mmanon bugfix: shortened IPv6 form not always anonymized If the IPv6 is in non-recommended form followed by a 5 digit port number, it is not anonymized. A reproducer for this is: 1a00:c820:1180:c84c::ad3f:d991:ec2e:49255 closes https://github.com/rsyslog/rsyslog/issues/4856 - 2022-04-22: mmdblookup fix: wrong copy of buffer ...following parse of libmaxminddb's return after a successful search sometimes failed to return specific field from data. Thanks to Théo Bertin for the patch. - 2022-04-22: mmdblookup: several enhancements - support arrays in MMDB entry - support escaped quotes '"' in MMDB entry - support '<' characters in MMDB entry, when in a field - support '}' characters in MMDB entry, when in a field Thanks to Théo Bertin for the patch. ---------------------------------------------------------------------------------------- Scheduled Release 8.2204.1 (aka 2022.04) 2021-05-05 - security bugfix: potential buffer overrun in imptcp, imtcp, imgssapi and others This addresses CVE-2022-24903 see also https://github.com/rsyslog/rsyslog/security/advisories/GHSA-ggw7-xr6h-mmr8 ---------------------------------------------------------------------------------------- Scheduled Release 8.2204.0 (aka 2022.04) 2021-04-19 - 2022-04-18: gnutls bugfix: possibility of infinite loop There was a rare possibility that the E_AGAIN/E_INTERRUPT handling could cause an infinite loop (100% CPU Usage), for example when a TLS handshake is interrupted at a certain stage. * After gnutls_record_recv is called, and E_AGAIN/E_INTERRUPT error occurs, we need to do additional read/write direction handling with gnutls_record_get_direction. * After the second call of gnutls_record_recv (Expand buffer) we needed to also check the eror codes for E_AGAIN/E_INTERRUPT to do propper errorhandling. * Add extra debug output based on ossl driver. * Potential fix for 100% CPU Loop Receiveloop after gtlsRecordRecv in doRetry call. closes https://github.com/rsyslog/rsyslog/issues/4834 closes https://github.com/rsyslog/rsyslog/issues/4818 closes https://github.com/rsyslog/rsyslog/issues/4638 - 2022-04-17: core/bugfix: errorfile could grow over max configures size When action.errorfile.maxsize configuration option is enabled and error file already has a certain size smaller than max size configured, it is increasing higher than configured max size as the error file is considered to be zero in code. This fix reads current error file size and limits the size to the maximum size configured. Thanks to Sergio Arroutbi for the patch. fixes https://github.com/rsyslog/rsyslog/issues/4821 - 2022-04-17: omkafka bugfix: potential misadressing The `failedmsg_entry` expects a null-terminated string in `key`, but here we allocate with malloc and copy a string-with-length-n into only the first n bytes. If the final byte is null, this is by coincidence only. This was observed by means of seeing random binary data appended to keys submitted to kafka apparently at random. This could also result in more severe problems, inclusing a segfault. Thanks to David Buckley for the patch. - 2022-04-06: added new "FullJSONFmt" standard template (with addtl fields) This comes handy for a number of use cases, especially with ElasticSearch. Thanks to Art O Cathain for the patch. - 2022-04-04: imfile: potential processing delay This was mentioned by Mikko Kortelainen without exact details on what exactly this could cause in practice. But we were confident enough that it is worth merging (though it does not look like something that brought real problems in practice, as we do not know any related reports). see also: https://github.com/rsyslog/rsyslog/pull/4445 Thanks to Mikko Kortelainen for the patch. - 2022-04-04: bugfix: cosmetic data races there was a more or less cosmetic data race which could happen when children processes died in quick sequence. Even then, no real harm happened, as all children were reaped eventually. A similar data race exists for HUP processing. However, these races polluted TSAN test runs, and so we fixed them - 2022-04-01: add property options to support ISO week/year number Thanks to Mattia Barbon for the patch. - 2022-04-01: core bugfix: "action suspended" message was emitted even when turned off Most messages were diasabled, but there was one part of the code that ignored the user configuration. Thanks to Deyneko Aleksey for the patch. - 2022-03-31: testbench: add more tests for rscript comparison operations - 2022-03-31: core bugfix: make internal logs emitted during HUP procesing appear quicker After call doHUP(), probably there is a internal log in the list. However, it will not be wrote out immediately, because the mainloop will be blocked at pselect in wait_timeout() until a long timeout or next message occur. More deadly, the log may be lost if the deamon exits unexpectedly. We might as well put processImInternal() after doHUP(), so that the message will be flushed out immediately. Fixes: 723f6fdfa6(rsyslogd: Fix race between signals and main loop timeout) Thanks to Yun Zhou for the patch. - 2022-03-20: refactor: Move the parser directive to the main config Thanks to Attila Lakatos for the patch. - 2022-03-16: refactor: ake the main message queue part of the config The intent of this patch is to make the main message queue part of the main config. It will help us to proceed towards dynamic configuration reload. - regression bugfix: rsyslog may segfault during startup glblGetMaxLine() might be called even before the main configuration file exists resulting unexpected behavior, most probably segmentation fault. This is addressed by re-introducing the old default of 8KiB. The problem was introduced earlier in 2022. - regression fix: script string comparison did not work correctly In rscript, comparison operations on strings did not work correctly and returned false results. This is cause by a regression in commit 5cec5dd634e0. While it fixed number comparisons, it introduced new problems in string comparisons, which were not present before. Note that most items in rsyslog are strings, so this can actually cause some problems. ---------------------------------------------------------------------------------------- Scheduled Release 8.2202.0 (aka 2022.02) 2022-02-15 - 2022-02-14: imfile bugfix: remove cause for "internal error message" (not causing harm) When any message is output into a renamed input file, rsyslogd output the following: message. imfile: internal error? inotify provided watch descriptor 7 which we could not find in our tables - ignored When rsyslogd detects the inode change, it deletes the entry from wdmap[]. But, the watch descriptor is not removed. Some application like sssd outputs some messages (like "HUP signal was received!!") after HUP signal is received and before switching into the new log file. And, the above messages can be output every log rotation. This situation is now resolved. Thanks to Masahiro Matsuya for the patch. - 2022-02-04: rscript bugfix: literal numbers were not compared correctly This problem occurred when numbers were used in rsyslog.conf in the set statement, e.g. set $nbr = 1234; In this case, during comparisons, the number was actually interpreted as a string with digits. Thus numerical comparisons lead to unexpected results. Even more so, as in other places of the code they were treated as native numbers. This is now fixed. We cannot outrule that this causes, in border cases, change of behavior to existing configs. But it is unlikely and the previous behaviour was a clear bug and very unintuitive. This in our opinion it is justified to risk a breaking change for an expected very minor subset of installations, if any such exists at all. closes https://github.com/rsyslog/rsyslog/issues/4770 - 2022-02-04: omelasticsearch bugfix: indexSuccess impstats counter in bulkmode wrong When bulkmode is enabled, and a batch was processed without any failures (errors is false), the code that increments the indexSuccess impstats counter was never reached. closes: https://github.com/rsyslog/rsyslog/issues/4794 - 2022-01-17: imkmsg bugfix: effectively disabled input on error reading kmsg Due to a program bug, imkmsg could not recover from an kmsg read error. Note that recovering is possible and was intended. Thanks to Kailash Sethuraman for the patch. - 2022-01-17: imtcp bugfix: worker threads were not properly terminated Graceful shutdown of Rsyslog could lead to segmentation faults when multiple imtcp inputs were being used. That is because the rest of the tcpsrv threads are left behind running, while their underlying objects are being disposed by the main thread as part of the module de-initialization. closes: https://github.com/rsyslog/rsyslog/issues/4776 Thanks to Gabor Orosz for the analysis and patch. - 2022-01-07: omlibdbi bugfix: use-after-free bug This occurred in when sqllite driver was used. Depending on circumstances, this had no visible issues (often) up to rsyslog segfault. The busier rsyslog is, the more likely a bad outcome. - 2022-01-06: omhttp bugfix: memory leak in lokirest batchmode A JSON object was created (valueObj) but not used and also not released causing a memory leak. Over time, this could lead to memory overcomittent. closes: https://github.com/rsyslog/rsyslog/issues/4766 ---------------------------------------------------------------------------------------- Scheduled Release 8.2112.0 (aka 2021.12) 2021-12-16 - 2021-12-14: refactor:Deallocate outchannel resources in rsconf destructor Thanks to Attila Lakatos for the patch. - 2021-12-14: refactor: use runConf instead of loadConf in ratelimiting during runtime Thanks to Attila Lakatos for the patch. - 2021-11-22: new contribtion: URL parser module function using libfa Thanks to Théo Bertin for the patch. - 2021-11-18: mmanon: relax IPv6 detection - improve anonymization We so far tried to ensure a value is really an IPv6 address, in order to avoid to mangle with just similar-looking information elements. However, this lead to misdetection for unusual formats, e.g. when a port is appended to a numerical IPv6 adress given without braces []. This has been changed now. In a sense, we now prefer to err on the side of privacy. BEHAVIOR CHANGE: Previously, a suspect value was not anonymized, and thus some other elements (like some MAC addresses) preserved. Now the opposite is true, and we anonymize anything that looks close enough to be an IPv6 address. This improves anonymization. closes https://github.com/rsyslog/rsyslog/issues/4725 - 2021-11-10: ruleset bugfix: ruleset queue was incorrectly named The ruleset was incorrectly and unusably named. This was a regeression from 4a63f8e9629c3c9481a8b6f9d7787e3b3304320b. Many thanks to github user digirati82 for alerting us. closes https://github.com/rsyslog/rsyslog/issues/4730 - 2021-11-10: omsnmp: update module to current IP best practices The omsnmp module uses the inet_addr() function to convert the Internet host address from IPv4 numbers-and-dots notation into binary data in network byte order. If the input is invalid, INADDR_NONE (usually -1) is returned. Use of this function is problematic because -1 is a valid address (255.255.255.255). We should avoid its use in favor of inet_aton(), inet_pton(3), or getaddrinfo(3), which provide a cleaner way to indicate error return [1]. This is just a request to satisfy covscan, so no error is reported at all. Thanks to Attila Lakatos for the patch. - 2021-10-27: ommysql: fix threading bug When the MariaDB connection was (re)established, old or NULL handle could be used. This is fixed now. We need to synchronize access to the mysql handle, because multiple threads use it and we may need to (re)init it during processing. This could lead to races with potentially wrong addresses or NULL accesses. If this really matters mostly depends on the MariaDB/MySQL client library. It looks like they guard against fatal failuers. Anyhow, logging errors inside rsyslog could happen in any case. - 2021-10-25: testbench: false positive when impstats was not built Test omfwd_fast_imuxsock failed when impstats was not built. This has been corrected, test is now only executed when impstats is present. - 2021-10-25: imtcp: add support for permittedPeers setting at input() level The permittedPeers settig was actually forgotten during the refactoring of TLS input() level settings. This functionality is now added. closes: https://github.com/rsyslog/rsyslog/issues/4706 ---------------------------------------------------------------------------------------- Scheduled Release 8.2110.0 (aka 2021.10) 2021-10-19 - 2021-10-13: config bugfix: global(security.abortonidresolutionfail=) did not work when used with rscript based configuration, it was not checked. - 2021-10-13: config bugfix: global param $privDropToUser did not work correctly The parameter was not implemented for rscript based configuration and did not properly apply to legacy configuration. In essence, it almost always did not work as expected. see also: https://github.com/rsyslog/rsyslog/issues/4642 see also: https://github.com/rsyslog/rsyslog/commit/cbcaf2c7e5b67e5465e47bc7cc67af2eae47bd31 - 2021-10-12: rscript bugfix: ruleset called async when ruleset had queue.type="direct" The call rscript statement is able to call a rule set either synchronously or asynchronously. We did this, because practice showed that both modes are needed. For various reasons we decided to make async calls if the ruleset has a queue assigned and sync if not. To know if a "queue is assigned" we just checked if queue parameters were given. It was overlookeded the case of someone explicitly specifying a "direct queue", aka "no queue". As such, queue="direct" triggered async calls. That in turn meant that when a write operation to a variable was made inside that rule set, other rulesets could or could not see the write. While if was often not seen, this was a data race where the change could also be seen by the outside. This is now fixed. No matter if queue.type="direct" is specified or left out, the call will always by synchronous. Any values written to variables will also be seen by the "outside world" in later processing stages. Note that this has some potential to BREAK EXISTING CONFIGURATIONS. We deem this acceptable because: 1. this was racy at all, so unexpected behaviour could alwas occur 2. it is actually unlikely that someone used the triggering conditions in practice. But we can not outrule this, especially when the configuration was auto-generated. Potential compatibility issues can be solved by defining a small array-memory queue on the ruleset in question instead of specifying direct type. Again, we expect that almost all users will never experience any problems. If you do, however, please let us know: we may add an option to re-enable the bug. - 2021-10-12: ksi bugfix: locking bug fixed in rsksiCtxOpenFile Thanks to Taavi Valjaots for the patch. - 2021-10-11: core bugfix: fix typo in error message Thanks to github user jkschulz for the patch. - 2021-10-11: tcpsrv bugfix: compilation without exceptions tcpsrv.c:992:1: error: label at end of compound statement finalize_it: ^~~~~~~~~~~ Quoting from pthread.h: pthread_cleanup_push and pthread_cleanup_pop are macros and must always be used in matching pairs at the same nesting level of braces. Amends commit bcdd220142ec9eb106550195ba331fd114adb0bd. Thanks to Orgad Shaneh for the patch. - 2021-10-11: mkubernetes bugfix: no connection retry to kubernetes APP When connection to the kubernates API was not possible, mmkubernetes did not retry. This does now happen via regular rsyslog retry mechanism. Thanks to github user jayme-github for the analysis and patch. closes https://github.com/rsyslog/rsyslog/issues/4669 - 2021-10-11: openssl bugfix: Correct gnutlsPriorityString (custom ciphers) behaviour - Only apply default anon ciphers if gnutlsPriorityString is NULL and Authentication Mode is set to anon. Otherwise we do not set them as they overwrite custom Ciphers. - Added two tests for custom cipher configuration (anon/certvalid mode). - Add call for applyGnutlsPriorityString if gnutlsPriorityString changes. - Merged openssl init code from Connect into osslInitSession closes: https://github.com/rsyslog/rsyslog/issues/4686 - 2021-10-11: build issue: handle undefined MAXPATHLEN, PATH_MAX While we handled missing PATH_MAX, we did not handle missing MAXPATHLEN. This happens under GNU/Hurd, because there is no official limit. However, extremely long pathes are extremely uncommon, so we do not want to use slow dynamic alloc each time we need to build pathes. So we impose a limit of 4KiB, which should be fairly enough. Note that this obviously increases stack requirements in GNU/Hurd. As suggested by Michael Biebl, we have now implemented a generic approach to handle this via autoconf. - 2021-09-12: openssl: extended output information on connection failure Now includes the remote client/server IP address in the log output. - 2021-09-12: imhttp enhancements - query parameter ingestion & basic auth support - Basic Authentication support & tests * configured via imhttp option "basicAuthFile". This option should be configured to point to your htpasswd file generated via a standard htpasswd tool. tests: * imhttp-post-payload-basic-auth.sh * imhttp-post-payload-basic-auth-vg.sh - Query parameter ingestion capability & tests use t `addmetadata` option to inject query parameters into metadata for imhttp input. DISTRO PACKAGERS BEWARE: NEW DEPENDENCY FOR IMHTTP: libaprutil (libaprutil1-dev on debian'ish, apr-util-devel on Red Hat) Thanks to Nelson Yen for the patch. - 2021-09-07: testbench bugfix: privdrop tests under root user did not work When running under root, the privdrop tests did not properly work. This patch fixes the issue and skips test where necessary. This also includes some modernization of the related tests. closes https://github.com/rsyslog/rsyslog/issues/4619 - 2021-09-07: core/ratelimiting: fix rate limiting for already parsed messages Rate limiting may not have worked if the considered message had already been parsed (not having NEEDS_PARSING in msgFlags). This affects also imuxsock in its default configuration (useSpecialParser="true" and ratelimit.severity="1") - 2021-09-07: core bugfix: use of property $wday terminates string When $wday is used inside a template, all template parts after it are ignored. For exmaple: template(name="json_filename" type="string" string="/var/log/%$wday%.log") would generate something like "/var/log/0" - the ".log" part would be missing. For the same reason, $wday can not reliably checked in script filters. Thanks to Alain Thivillon for reporting the bug and providing an excellent analysis, which essentiellay was exactly this fix here. closes https://github.com/rsyslog/rsyslog/issues/4670 - 2021-09-07: core/queue bugfix: potential misadressing when queue discarded messages When a discard mark was set, the queue was very busy and discarded messages, a NULL pointer access could happen. Depending on circumstances, several problems could occur, including a SEGFAULT. This is now fixed. closes: https://github.com/rsyslog/rsyslog/issues/4437 - 2021-09-07: imdiga bugfix: iOverallQueueSize calculation could be incorrect This issue only affects testbench and rsyslog development debugging. The active messages counter, used for synchronizing test steps, went wrong when the queue discarded messages on it's consumer thread. Now fixed. - 2021-09-06: gnutls driver: SAN priority did not work correctly on server side PrioritizeSAN was not propagated when accepting a new connection, this is now fixed. Thanks to Attila Lakatos for the patch. - 2021-08-24: config: implement script-equavalent for $PrivDrop* statements closes https://github.com/rsyslog/rsyslog/issues/891 ---------------------------------------------------------------------------------------- Scheduled Release 8.2108.0 (aka 2021.08) 2021-08-17 - 2021-08-16: openssl tls: Improved error message output on tls failures. closes: https://github.com/rsyslog/rsyslog/issues/4645 - 2021-08-16: impstats: add percentile metrics tracking functionality Brief overview: TO configure tracking percentile metrics in rainerscript: User would need to define: - which percentile to track, such as [p50, p99, etc.] - window size - note, this correlates directly with memory usage to track the percentiles. To track a value, user would call built-in function `percentile_observe()` in their configurations to record an integer value, and percentile metrics would be emitted every impstats interval. Thanks to Nelson Yen for the patch. - 2021-08-12: imfile: add parameter "ignoreolderthanoption" instructs imfile not to ingest a file that has not been modified in the specified number of seconds. Thanks to github user yanjunli76 for the patch (submitted from Nelson Yen) - 2021-08-10: imklog bugfix: invalid memory adressing, could cause abort This is a regeression from commit 94c4a87. It introduced a free() call using an object that was no longer valid (the main pointer to the to-be-freed object) was already freed at time of use. This could cause various issues, including a segfault. Note: this bug was triggerred only during late phase of rsyslog shutdown, so it did not affect regular operation. Special thanks to github user wxiaoguang for analyzing the issue and providing a draft fix proposal, on which this patch builds. see also https://github.com/rsyslog/rsyslog/pull/4629 closes https://github.com/rsyslog/rsyslog/issues/4625 - 2021-08-09: imfile bugfix: deleteStateOnFileDelete missed some state files When the log file is deleted, imfile would attempt to delete the statefile but it was missing the file_id part of the statefile name. This means the statefiles were only removed in the log file was less than 512 characters, because for very small files the file ID hash is not created. This lead to some state files not being deleted. Thanks to pearseimperva for the patch. - 2021-08-09: imfile bugfix: hash char invalidly added in readmode != 0 If imfile is ingesting log files with readMode set to 2 or 1, the resulting messages all have a '#' character at the end. This patch corrects the behaviour. Note: if some external script "supported" the bug of extra hash character at the end of line, it may be necessary to update them. closes https://github.com/rsyslog/rsyslog/issues/4491 - 2021-08-09: omelasticsearch bugfix: errorFile mutex was not consistently locked Lock the file during SIGHUPs to avoid issues with concurrent accesses by writeDataError(). Thanks to François Poirotte for the patch. - 2021-08-09: imudp: add socket type (IPv4 vs. 6) to input name Most importantly, the input name is used for stats counter names as well. Previously, the same name was used for IPv4 and IPv6, so we had two counters with an equal name. That left users puzzled. Unfortunately, this change can potentially require changes to existing analysis scripts, as the name is now slightly different. closes https://github.com/rsyslog/rsyslog/issues/4364 - 2021-08-06: omfwd: add capability for action-specific TLS certificate settings This permits to override the global definitions for TLS certificates at the action() level. - 2021-08-06: imfile bugfix: file handle leak if "freshStartTail" was turned on - 2021-08-05: imtcp: permit to use different certificate files per input/action This completes the ability to override global/default TLS settings at the imtcp input() level. Support for using multiple CAs/Certs per Connection is now provided. - 2021-08-04: imptcp bugfix: keep alive interval was incorrectly set The interval was accidentally set to keep alive interval. This has been corrected. closes https://github.com/rsyslog/rsyslog/issues/4609 - 2021-07-08: openssl network driver bugfix: small memory leak Fixes a static, non-growing memory leak which existed when parameter "GnutTLSPriorityString" was used. This was primarily a cosmetic issue, but caused some grief during development in regard to memory leak detectors. Note: yes, this is for openssl -- the parameter name is historical. - 2021-07-07: psrv bugfix: abort if no listener could be started Modules (like imtcp and imdiag) which use tcpsrv could abort or otherwise malfunction if no listener for a specific input could be started. Found during implementing a new feature, no report from practice. But could very well happen. - 2021-07-07: mmkubernetes bugfix: apiserver error handling - Added graceful handling of apiserver errors with unexpected responses, i.e., anything other than 200, 404, or 429. Idea is that apiserver transient error state will recover. We don't want mmkubernetes to miss metadata resolution for containers that don't have cached metadata. During these transient error states, mmkubernetes will provide basic container file path based resolution of namespace and pod metadata for new pods whose metadata is not yet cached. After this error state recovers, mmkubernetes is expected to resume its metadata resolution as expected. - Added a unit test case for apiserver return 500 with changes to mock server - Fixed existing unit test that was failing due to missing expected results file - Added mmkubernetes unit tests to testbench Thanks to Abdul Waheed for the patch (submitted from Nelson Yen). - 2021-07-07: ommongodb bugfixes - Fix Segmentation fault when server is down - Add server connexion check while resuming Thanks to Kevin Guillemot for the patch. - 2021-06-28: omkafka improvements - drain librdkafka queues and retry later during rsyslog restart or hup. This re-injects messages into rsyslog's native queues. - add statsname on per kafka instance for better visibility - omkafka - count errors related ssl as "errors_ssl" Thanks to Nelson Yen for the patch. - 2021-06-23: some CI/QA improvements, Travis-CI disabled For the time being, Travis CI is disabled because it was outdated and Travis also changed their system. We will re-evaluate if we re-enable it. Since quite a while the Travits tests were redundant with the rest of CI, so this does not reduce coverage. - 2021-06-23: omhttp bugfix: dynrestpath param in batch mode invalid When batchmode was used, the templates could not be used to expand dynrestpath. We are now storing the restpath param within the batch data if we are in batch mode. When we are in batch mode, and the restpath value changes, the batch is submitted and reinitialized closes: https://github.com/rsyslog/rsyslog/issues/4567 - 2021-06-17: add predefined template RSYSLOG_SyslogRFC5424Format This is essentially the same as RSYSLOG_SyslogProtocol23Format with a better name and a fix to remove the unnecessary LF at the end of the message. The different name also enables us to fix the LF issue without any concern about backwards compatibility. closes https://github.com/rsyslog/rsyslog/issues/4384 - 2021-06-17: impstats/bugfix: _sender_stats reports integer counter as string Note that this introduces a small backwards incompatibility: in previous output the field was of string type, now it is integer (as intended). We discussed this on the mailing list and the overwhelming thought was that this is not a problem because almost all analysis backends are able to cover that format change. This made the bugfix essentially costmetic. HOWEVER, if you still experience issues, please let us know. We can add an option to provide the previous format, and just spared to do so because there was no evidence it was needed. ---------------------------------------------------------------------------------------- Scheduled Release 8.2106.0 (aka 2021.06) 2021-06-15 NOTE: the prime new feature is support for TLS and non-TLS connections via imtcp in parallel. Furthermore, most TLS parameters can now be overriden at the input() level. The notable exceptions are certificate files, something that is due to be implemented as next step. - 2021-06-14: new global option "parser.supportCompressionExtension" This permits to turn off rsyslog's single-message compression extension when it interferes with non-syslog message processing (the parser subsystem expects syslog messages, not generic text) closes https://github.com/rsyslog/rsyslog/issues/4598 - 2021-05-12: imtcp: add more override config params to input() It is now possible to override all module parameters at the input() level. Module parameters serve as defaults. Existing configs need no modification. - 2021-05-06: imtcp: add stream driver parameter to input() configuration This permits to have different inputs use different stream drivers and stream driver parameters. closes https://github.com/rsyslog/rsyslog/issues/3727 - 2021-04-29: imtcp: permit to run multiple inputs in parallel Previously, a single server was used to run all imtcp inputs. This had a couple of drawsbacks. First and foremost, we could not use different stream drivers in the varios inputs. This patch now provides a baseline to do that, but does still not implement the capability (in this sense it is a staging patch). Secondly, we now ensure that each input has at least one exclusive thread for processing, untangling the performance of multiple inputs from each other. see also: https://github.com/rsyslog/rsyslog/issues/3727 - 2021-04-27: tcpsrv bugfix: potential sluggishnes and hang on shutdown tcpsrv is used by multiple other modules (imtcp, imdiag, imgssapi, and, in theory, also others - even ones we do not know about). However, the internal synchornization did not properly take multiple tcpsrv users in consideration. As such, a single user could hang under some circumstances. This was caused by improperly awaking all users from a pthread condition wait. That in turn could lead to some sluggish behaviour and, in rare cases, a hang at shutdown. Note: it was highly unlikely to experience real problems with the officially provided modules. - 2021-04-22: refactoring of syslog/tcp driver parameter passing This has now been generalized to a parameter block, which makes it much cleaner and also easier to add new parameters in the future. - 2021-04-22: config script: add re_match_i() and re_extract_i() functions This provides case-insensitive regex functionality. closes https://github.com/rsyslog/rsyslog/issues/4429 ---------------------------------------------------------------------------------------- Scheduled Release 8.2104.0 (aka 2021.04) 2021-04-20 - 2021-04-19: new contributed module imhiredis Thanks to Théo Bertin (frikilax) for the patch. - 2021-04-19: new built-in function get_property() to access property vars Provides ability to evaluate a rsyslog variable using dynamically evaluated parameters. 1st param is the rsyslog param, 2nd param is a key, can be an array index or key string. Useful for accessing json sub-objects, where a key needs to be evaluated at runtime. Can be used to access arrays as well. Thanks to Nelson Yen for contributing this module. - 2021-04-19: mmdblookup: add support for mmdb DB reload on HUP Thanks to Théo Bertin (frikilax) for the patch. - 2021-04-19: script bugfix: empty array in foreach() improperly handled When running a foreach() loop inside a ruleset, if the json array/object iterated over is empty but valid, the foreach will make the message processing in the ruleset abort operation, no following operation (such as actions) will be executed after this. Thanks to Théo Bertin (frikilax) for the patch. - 2021-04-19: imjournal bugfixes (handle leak, empty file) Flush the FILE* buffer before rename & fsync in order to not end up syncing an empty file. Also, close WorkDir on fsync in order to prevent file descriptor leakage. Thanks to github user gerd-rausch for the fix. - 2021-04-06: new contributed function module fmunflatten This commit adds a new rainerscript function to unflatten keys in a JSON tree. It provides a way to expand dot separated fields. = unflatten(, ); It allows for instance to produce this: { "source": { "ip": "1.2.3.4", "port": 443 } } from this source data: { "source.ip": "1.2.3.4", "source.port": 443 } Thanks to Julien Thomas for the contribution. - 2021-02-22: test bugfix: some tests did not work with newer TLS library versions Newer versions provide TLS versions that cannot be disabled in older versions as they are unknown there. This is solved by setting restrictions in multiple steps. For older library versions, the final step will error out, but the other one be applied. This permits to achieve proper test results. closes: https://github.com/rsyslog/rsyslog/issues/4534 - some improvements to project CI ---------------------------------------------------------------------------------------- Scheduled Release 8.2102.0 (aka 2021.02) 2021-02-16 - 2021-02-15: omfwd: add stats counter for sent bytes Thanks to John Chivian for suggesting this feature. - 2021-02-15: omfwd: add error reporting configuration option RSyslog on a plain TCP cannot guarantee the message delivery without using RELP protocol. Besides that the logs may be flooded with connection errors making the rest of messages difficult to find. To alleviate the problem (see issue 3910), this patch adds a configuration option that enables to reduce the number of network errors logged and reported. For example, if each 10th network error message should be logged, the rsyslog configuration has to be updated as follows. action(type="omfwd" Target="" Port="" Protocol="tcp" ConErrSkip="10") Thanks to Libor Bukata for the patch. - 2021-02-15: action stats counter bugfix: failure count was not properly incremented In some cases the counter was not incremented, most notably with transaction-enabled actions. Thanks to github user thinkst-marco for the patch. - 2021-02-15: action stats counter bugfix: resume count was not incremented And so it always stayed at zero. Thanks to github user thinkst-marco for the patch. - 2021-02-15: omfwd bugfix: segfault or error if port not given If omfwd is configured via RainerScript config format and the "port" parameter is not given, a segfault will most likely happen on connection establishment for TCP connections. For UDP, this is usually not the case. Alternatively, in any case, errors may happen. Note that the segfault will usually happen right on restart so this was easy to detect. We did not receive reports from practice. Instead, we found the bug while conducting other work. - 2021-01-29: lookup table bugfix: data race on lookup table reload A data race could happen when a lookup table was reloaded. We found this while moving to newer version of TSAN, but have no matching report from practice. However, there is a potential for this to cause a segfault under "bad circumstances". - 2021-01-18: testbench modernization Bump dependency versions, use newer distro versions for some tests. Make kafka distcheck separate to help diagnose flaky kafka tests. - 2021-01-16: testbench: fix invalid sequence of kafka tests runs kafka tests can not run well in parallel (mostly due to ressource constraints on CI machines). Accidentally, this was not enforced for one of the tests. That could lead to random failures and false positives. - 2021-01-14: testbench: fix kafkacat issues The kafkacat tool has an upper limit of how many messages it can send at once. Going over that limit causes messages loss. The exact limit seems to depend on the environment. This causes testbench false positives. This commit fixes two related issues: - errors during kafkacat run were not detected - this has been added - we now have a "max messages at once" setting, after which kafkacat is restarted for the next batch of messages. It currently is set to 25,000 msgs per incarnation. All tests loop now to send the required number of messages. This has been fixed at the testbench framework level, so no need to adjust individual tests. - 2021-01-14: testbench: fix year-dependendt clickhouse test A test had the year value hardcoded and as such failed whenever the year changed. This patch corrects that. ---------------------------------------------------------------------------------------- Scheduled Release 8.2012.0 (aka 2020.12) 2020-12-08 - 2020-12-07: testbench bugfix: some tests did not work in make distcheck - certificate file missing in dist tarball - some test cases did not properly specify path to cert file Thanks to Michael Biebl for alerting us and providing part of the fix. closes https://github.com/rsyslog/rsyslog/issues/4446 - 2020-12-07: immark: rewrite with many improvements - mark message text can now be specified - support for rulesets - support for using syslog API vs. regular internal interface - support for output template system - ability to specify is mark message flag can be set - minor changes and improvements - 2020-11-30: usability: re-phrase error message to help users better understand cause see also https://github.com/rsyslog/rsyslog/issues/3910 - 2020-11-10: add new system property $now-unixtimestamp Among others, this may be used as a monotonic counter for doing load-balancing and other things. Thanks to Nicholas Brown for suggesting this feature. - 2020-11-04: omfwd: add new rate limit option Adding new rate limit option to omfwd for rate limiting syslog messages sent to the remote server ratelimit.interval: Specifies the rate-limiting interval in seconds. Default value is 0, which turns off rate limiting. ratelimit.burst Specifies the rate-limiting burst in number of messages. closes https://github.com/rsyslog/rsyslog/issues/4423 Thanks to Dinesh-Ramakrishnan for the patch. - 2020-11-03: omfwd bug: param "StreamDriver.PermitExpiredCerts" is not "off" by default The default behaviour of expired certificates of stream driver in TLS mode, should have been that the see tcp transmission is closed due to expired certificates, and error messages emited in rsyslog status. This was not the case. That in turn could lead to permitting sessions which should not be permitted. Thanks to Vincent Zhu for alerting us and providing a great problem analysis closes: https://github.com/rsyslog/rsyslog/issues/4425 ---------------------------------------------------------------------------------------- Scheduled Release 8.2010.0 (aka 2020.10) 2020-10-20 - 2020-10-13: gnutls TLS subsystem bugfix: handshake error handling If the tls handshake does not immediatelly finish, gnutls_handShake is called in doRetry handler again. However the error handling was not complete in the doRetry handler. A failed gnutls_handShake call did not abort the connection and properly caused unexpected problems like in issues: https://github.com/rsyslog/rsyslog/issues/4270 https://github.com/rsyslog/rsyslog/issues/4288 - 2020-10-13: core/msg bugfix: memory leak There is a missing call to json_object_put(json) if the call to jsonPathFindParent() failed. It's leaking memory. Depending on workload and config, this leak can potentially grow large (albeit we did not see reports from practice). Thanks to Julien Thomas for the patch. - 2020-10-13: core/msg bugfix: segfault in jsonPathFindNext() when not an object The segfault gets happens when is 1 and when the container where to insert the key is not an object. Here is simple reproducible test case: // ensure we start fresh // unnecessary if there was no previous set unset $!; set $! = ""; set $!event!created = 123; Thanks to Julien Thomas for the patch. - 2020-10-13: openssl TLS subsystem: improvments of error and status messages Adding error logs at the ssl handshake failure scenarios. Adding the header "nsd_ossl:" tag to these logs to identify the origin module from which logs are generated. Thanks to Anusha Pai G for the patch. - 2020-10-06: add 'exists()' script function to check if variable exists This implements a way to check if rsyslog variables (e.g. '$!path!var') is currently set of not. Sample: if exists($!somevar) then ... closes https://github.com/rsyslog/rsyslog/issues/4385 - 2020-10-03: core bugfix: do not create empty JSON objects on non-existent key access Performing a condition (eg: check for an empty string) on a subtree key that do not exists (depth > 1 from the root container), creates an empty "parent" object. Depending on your context, you may end up with (kind of...) annoying garbage when producing object documents (for instance to index in ES). Also fixes a hypothetical hang condition with an almost (?) unused plugin parameter passing mode, for details see https://github.com/rsyslog/rsyslog/issues/4436 closes https://github.com/rsyslog/rsyslog/issues/4430 Thanks to Julien Thomas for the patch. - 2020-09-28: gnutls subsysem bugfix: potential hang on session closure Some TLS servers don't reply to graceful shutdown requests "for optimization". This results in rsyslog's omfwd+gtls client to wait forever for a reply of the TLS server which never comes, due to shutting down the connection with gnutls_bye(GNUTLS_SHUT_RDWR). On systemd systems, commands such as "systemctl restart rsyslog" just hang for 1m30 and rsyslogd gets killed upon timeout by systemd. This is fixed by replacing the call to gnutls_bye(GNUTLS_SHUT_RDWR) by calls to gnutls_bye(GNUTLS_SHUT_WR) which is sufficient and doesn't wait for a server reply. As an example, Kiwi Syslog server is known to cause this issue. Thanks to Renaud Métrich for the patch. - 2020-09-23: core/network bugfix: obey net.enableDNS=off when querying local hostname Local hostname resolution used DNS queries even if the enableDNS was set to off, and this could cause unexpected delays in the HUP signal handling if the DNS server was not responsive. Thanks to Samu Nuutamo for the fix. - 2020-09-14: core bugfix: potential segfault on query of PROGRAMNAME property A data race can happen on variable iLenProgram as it is not guarded by the message mutex at time of query. This can lead to it being non -1 while the buffer has not yet properly set up. Thanks to Leo Fang for alerting us and a related patch proposal. replaces https://github.com/rsyslog/rsyslog/pull/4300 - 2020-09-14: imtcp bugfix: broken connection not necessariy detected Due to an invalid return code check, broken TCP sessions could not necessarily be detected "right in time". This can result is the loss of one message. closes https://github.com/rsyslog/rsyslog/issues/4227 Thanks to Leo Fang for the patch. - 2020-09-14: new module: imhttp - http input permits to receive log data via HTTP. uses http library to provide http input. user would need to configure an 'endpoint' as input, along with a ruleset, defining how the input should be routed in rsyslog. Thanks to Nelson Yen for contributing this module. - 2020-09-11: mmdarwin bugfix: potential zero uuid when reusing existing one - fix a use-after-free variable during darwin uuid message extraction - improve debug/output by logging uuid parse errors Thanks to github user frikilax for the patch. - 2020-09-10: imdocker bugfix: build issue on some platforms An invalid variable type was used, leading to compile errors at least on all platform that use gcc 10 and above. Otherwise, however, it looks like the issue caused no real harm. - 2020-09-07: omudpspoof bugfix: make compatbile with Solaris build Thanks to Dagobert Michelsen for the patch. - 2020-09-03: testbench fix: python 3 incompatibility - 2020-09-02: core bugfix: segfault if disk-queue file cannot be created When using Disk Queue and a queue.filename that can not be created by rsyslog, the service does not switch to another queue type as supposed to and crashes at a later step. closes: https://github.com/rsyslog/rsyslog/issues/4282 - 2020-08-26: cosmetic: fix dummy module name in debug output When we have optional components (like imjournal) a dummy module is used. It's sole purpose is to emit "this module is not available". During init, the module emitted an invalid module name into the debug log. This has now been replaced by the generic term "dummy". Note: it is highly unlikely that someone will ever see that message at all, as it is unlikely for the dummy modules to be build. see also: https://github.com/rsyslog/rsyslog/commit/84a7e3d80b80106dcc86c273ed8cf78a6c11c722#r41782830 Thanks to Thomas D. (whissi) for the patch. - 2020-08-26: config bugfix: intended warning emitted as error When there are actions configured after a STOP, a warning should be emitted. In fact, an error message is generated. This prevents the construct, which may have some legit uses in exotic settings. It may also break older configs, but as the message is an error for so long now, this should be no longer of concern. ---------------------------------------------------------------------------------------- Scheduled Release 8.2008.0 (aka 2020.08) 2020-08-25 - 2020-08-25: imdocker bugfix: error reporting not always correct A wrong function to obtain the error code was used. This could lead to invalid error messages. Thanks to Steve Grubb for the bug report and fix proposal. closes https://github.com/rsyslog/rsyslog/issues/4381 - 2020-08-25: imptcp: add max sessions config parameter The max is per-instance, not global across all instances. There is also a bugfix where if epoll failed I think we could leave a session linked in the list of sessions, this code unlinks it. Thank to Alfred Perlstein for the patch. - 2020-08-24: omelasticsearch bugfix: reply buffer reset after health check The issue happens when more than one server is defined on the action. On that condition a health check is made through checkConn() before sending the POST. The replyLen should be set back to 0 after the health check, otherwise the response data received from the POST gets appended to the end of the last health check. Thanks to Julien Thomas for the patch. - 2020-08-14: omfile: do no longer limit dynafile cache size in legacy format When using obsolete legacy config format, omfile had a hard limit of 1,000 dynafile cache entries. This does not play well with very large installation. This limit is now removed and converted into a warning if cache size > 25,000 is specified. Note: the problem can easily be worked-around by using modern config format (RainerScript). closes: https://github.com/rsyslog/rsyslog/issues/4241 - 2020-08-13: imudp: fix very small, static memory leak When ruleset support was used, the ruleset name was not freed upon rsyslog termination. While this has no consequences for regular runs, it generates leak errors under memory debuggers and as such makes debugging harder than necessary. Thanks to github user frikilax for the patch. - 2020-08-13: omelasticsearch: add parameter skipPipelineIfEmpty When POST'ing a document, Elasticsearch does not allow an empty pipeline parameter value. This patch introduces boolean option skipPipelineIfEmpty to the omelasticsearch action. When set to true, the pipeline parameter won't be posted. Default is false so we do not modify current behavior. Thanks to Julien Thomas for the patch. - 2020-08-12: systemd service file removed from project This was done as distros nowadays have very different service files and it no longer is useful to provide a "generic" (sic) example. see also: https://github.com/rsyslog/rsyslog/issues/4333 - 2020-08-11: gnutls TLS driver bugfix: EKU check not done properly When the server accepted a new connection, it did not properly set the dataTypeCheck field based on the listening socket. That resulted in skipping ExtendedKeyUsage (EKU) check on the client. Thanks to Daiki Ueno for the patch. - 2020-08-06: MMDARWIN:: improve configuration flexibility and UUID fix -t pu now able to get fields from local variables ($.) - now able to configure a custom root container for mmdarwin fields - now able to put nested keys ($!key1!key2) - don't regenerate a UUID each time, but instead check if one exists before creating it (allow successive calls without losing previous UUID) Thanks to github user frikilax for the contribution. - 2020-08-06: add --enable-imjournal=optional ./configure option - 2020-08-06: IMPCAP::Fixes: segfault, memory and build corrections * fix bug in ethernet packets parsing * fix removes build error with gcc10: 'multiple definition of...' * resolve memory leak during interface init failure (device not freed after post-create error) * add test 'impcap_bug_ether' to prove ethernet parser fix is working Thanks to github user frikilax for the contribution. closes https://github.com/rsyslog/rsyslog/issues/4332 - 2020-07-14: CI: add support for github actions - 2020-07-14: imklog: add ruleset support see also: https://github.com/rsyslog/rsyslog/issues/4344#issuecomment-658001854 see also: https://github.com/rsyslog/rsyslog/issues/106 - 2020-07-06: config system fix: ChkDisabled method to make config.enabled work There was wrong negation in the method so it returned 0/1 in reverse and also it did not mark the node to not be reported as unknown at all times which is needed after all. Thanks to Jiri Vymazal for the patch. ---------------------------------------------------------------------------------------- Scheduled Release 8.2006.0 (aka 2020.06) 2020-06-23 - 2020-06-22: queue: permit ability to double size at shutdown This prevents message loss due to "queue full" when re-enqueueing data under quite exotic settings. see also https://github.com/rsyslog/rsyslog/issues/3941#issuecomment-549765813 closes https://github.com/rsyslog/rsyslog/issues/4020 - 2020-06-22:Fixing imfile segfaulting on selinux denial If imfile is denied access to file watched trough symlink there is unchecked condition resulting in access to not initialized memory. - 2020-06-22: openssl: Fixed memory leak when tls handshake failed. closes: https://github.com/rsyslog/rsyslog/issues/4319 - 2020-06-22: change systemd service file to wait for network now that rsyslog is usually only installed for real syslog servers, we should assume that some network listening or forwarding happens on start. As such we need to start a bit later, after the network. This poses no problem as systemd nowadays comes with journal which is in almost all cases configured to buffer log data while rsyslog is not yet running. see also https://github.com/rsyslog/rsyslog-pkg-rhel-centos/issues/72 - 2020-06-22: NEW INPUT MODULE:: impcap, network packets input parser Thanks to github user frikilax for the contribution. - 2020-06-22: ksi bugfix: Optimized code in KSI module initialization fixed. KSI module initialization will not stuck in infinite loop when code is built with optimization -O2. - 2020-06-05: operatingstatefile bugfix: month was given too low The month was printed with the range 0 (January) to 11 (December). This has now been corrected. closes https://github.com/rsyslog/rsyslog/issues/4292 - 2020-06-05: build system: add "optional" build functionality to some components Nameley: --enable-libdbi=optional --enable-mmdblookup=optional --enable-imkafka=optional --enable-omkafka=optional If used, builds a dummy module which just emits a "module not supported on this platform" error message when loaded. Primary use case for this system is Debian-ish builds on SUSE OBS, where we prefer to have a single package definition for all versions (else things get much more complicated). - 2020-05-23: config system bugfix: backticks cat segfault if file cannot be opened when a `cat ` construct is used in rsyslog.conf and can not be accessed (does not exist, no permissions, ...), rsyslog segfaults. Thanks to Michael Skeffington for notifying us and providing root cause analysis. closes https://github.com/rsyslog/rsyslog/issues/4290 - 2020-05-15: imtcp bugfix: octet framing/stuffing problem with discardTruncatedMsg on When "discardTruncatedMsg" was enabled in imtcp, messages were incorrectly skipped if the last character before the truncation was the LFdelimiter. Also adds two testbench tests for this case. closes: https://github.com/rsyslog/rsyslog/issues/4281 - 2020-05-12: ompipe bugfix: race during HUP When HUP was received, the write mutex was not acquired. This could lead to unexpected invalidation of the output file descriptor. Thanks to Julien Thomas for alerting us on this issue. see also https://github.com/rsyslog/rsyslog/pull/4136#issuecomment-578326278 - 2020-05-12: ompipe: add action parameter tryResumeReopen Sometimes we need to reopen a pipe after an ompipe action gets suspended. Sending an HUP signal to rsyslog does the job but requires an interraction with rsyslog. The patch adds support for a new boolean option, tryResumeReopen, for the ompipe action. It mimics what an HUP signal would do. Thanks to Julien Thomas for the patch. - 2020-05-12: imjournal: remove strcat call Thanks to Jeff Marckel for the patch. - 2020-05-12: build system: libzcmq version requirement needs to be bumped Thanks to Thomas Deutschmann for pointing this out. closes https://github.com/rsyslog/rsyslog/issues/3957 - 2020-05-12: testbench: download ElasticSearch binaries from rsyslog.com The official ElasticSearch download site sometimes denies the download. - 2020-05-11: openssl netstream driver bugfix: context leak The context object was not properly freed. Thanks to Michael Zimmermann for the fix. - 2020-05-11: omhttp: Add support for multiple http headers Allows the inclusion of multiple http headers on the REST call. Thanks to callmegar for the patch. - 2020-04-29: core bugfix: group id could not be obtained for very large groups Thanks to github user emilbart for the patch. - 2020-04-29: testbench additions (relp broken connection test) - 2020-04-29: omudpspoof bugfix: issues with oversized messages First issue was an incorrect packet length in UDP Header. It has to be the FULL UDP Packet regardless of the MTU Setting. As a result regardless of IP fragmentation, the MTU setting also limited the siizmax size of the UDP message. The second issue was incorrect calculation of the UDP Checksum with libnet if IP fragmentation was used (Based on MTU Setting). As a result, the network packets were dropped by the tcp stack before they even could reach there target. The workarround for this problem is, that we set the UDP Checksum to 0x0000 which allows skipping of the checksum test. Fixing the problem by calculating the correct UDP Checksum would require some code changes in the libnet. Also fixed the omudpspoof bigmsg test and increased the testing size to 16KB. - 2020-04-29: omprog: fix assert failed on HUP with output flag If the 'output' setting of omprog was used and rsyslog received a HUP signal just after starting (and before the omprog action received the first log to process), an internal assertion could fail, causing rsyslog to terminate. The failure message was "rsyslogd: omprog.c:660: closeOutputFile: Assertion `pCtx->bIsRunning' failed." The failure could also occur if rsyslog received a HUP signal during the shutdown sequence. This bug was introduced in v8.2004 by PR https://github.com/rsyslog/rsyslog/pull/4255 Although a test already existed that checked the interaction of HUPs with the 'output' setting, it didn't always fail in this particular case due to timing conditions. The test has been improved to cover this case more reliably. Thanks to Joan Sala Isern for the patch. ---------------------------------------------------------------------------------------- Scheduled Release 8.2004.0 (aka 2020.04) 2020-04-28 - 2020-04-28: ksi bugfix: When KSI module is suddenly closed, files are finalized In async. mode all pending signature requests are closed immediately and unsigned block marker is attached with message about sudden closure. Similar approach is used for blocks that already contain some records. Empty blocks are just closed without any metadata. Thanks to Taavi Väljaots for the patch. - 2020-04-28: ksi bugfix: Signer thread initialization is verified before usage. When signer thread is created in rsksiInitModule thread successful initialization is verified before returning the function. This will prevent adding records to not initialized module and in case of an error signature files opened will contain only magic bytes. Thread flags replaced with thread state. When init module fails, module is disabled. Thanks to Taavi Väljaots for the patch. - 2020-04-28: ksi bugfix: Hardcoded default hash algorithm replaced with 'default' Instead of hardcoded SHA-256 KSI_getHashAlgorithmByName("default") is used to get default hash function. Function rsksiSetHashFunction and SetCnfParam updated. Thanks to Taavi Väljaots for the patch. - 2020-04-28: imfile bugfix: poential segfault in stream object on file read - if cstrLen(pThis->prevMsgSegment) > maxMsgSize then len calculation become negative if cstrLen(thisLine) < cstrLen(pThis->prevMsgSegment) This causes illegal access to memory location and thus causing segfault. - assigning len = 0 if cstrLen(pThis->prevMsgSegment) > maxMsgSize so that it access the correct memory location. Thanks to github user jaankit - 2020-04-28: openssl TLS drivers: made more reliable for older openssl versions OpenSSL can retry some failed operations, but older versions need an explicit opt-in to do so. This is now done. - 2020-04-28: omprog: fix bad fd errors in daemon mode When omprog was used with the 'forceSingleInstance=on' option, and/or the 'output' setting, "bad file descriptor" errors occurred, which prevented the external program to be executed and/or the program output to be correctly captured. The bug could also manifest as "resource temporarily unavailable" errors, or other errors related to the use of invalid/reassigned file descriptors. These errors only happened when rsyslog ran in daemon mode (i.e. they didn't happen if rsyslogd was run with the '-n' option). The cause of the bug was that omprog opened the pipe fds needed by these flags during the configuration load phase (in the 'newActInst' module entrypoint). This is a bad place since the fork of the daemon occurs after this phase, and all fds are closed when the daemon process is started (see 'initAll' in rsyslogd.c), hence invalidating the previously opened fds. To correct this, the single child process and the output capture thread are now started later, when the first log message is received by the first worker thread. (Note: the 'activateCnf' module entrypoint, despite being invoked after the fork, cannot be used for this purpose, since it is invoked per module, not per action instance.) Currently no automated test exists for this use case since the testbench always runs rsyslog in non-daemon mode. Affected versions: v8.38 and later closes: https://github.com/rsyslog/rsyslog/issues/4247 Thanks to Joan Sala Isern for the patch. - 2020-04-28: omfile bugfix: $outchannel split log lines at rotation time - 2020-04-17: openssl: add support for libreSSL Disable use of "@SECLEVEL" in default cipher string and avoid SSL_CONF_CTX_set_flags() API when LIBRESSL is used. This means tlscommands will not work. closes: https://github.com/rsyslog/rsyslog/issues/4210 - 2020-03-04: imudp bugfix: build problems on some Linux kernel versions Thanks to Wen Yang for the patch. - 2020-03-02: conf output bugfix: -o produces missing space between call and rulename Thanks to Tetiana Ohnieva for the patch. closes https://github.com/rsyslog/rsyslog/issues/3761 ---------------------------------------------------------------------------------------- Scheduled Release 8.2002.0 (aka 2020.02) 2020-02-25 - 2020-02-25: imfile: add per minute rate limiting Add MaxBytesPerMinute and MaxLinesPerMinute options. These take integer values and, respectively, limit the number of bytes or lines that may be sent in a minute. This can be used to put a limit on the count or volume of logs that may be sent for an imfile. Thanks to Greg Farrell for the patch. - 2020-02-24: core: add global parameter "security.abortOnIDResolutionFail" This parameter controls whether or not rsyslog aborts when a name ID lookup fails (for user and group names). This is necessary as a security measure, as otherwise the wrong permissions can be assigned or privileges are not dropped. CHANGE OF BEHAVIOR The default for this parameter is "on". In previous versions, the default was "off" (by virtue of this parameter not existing). As such, existing configurations may now error out. We have decided to accept this change of behavior because of the potential security implications. closes https://github.com/rsyslog/rsyslog/issues/4164 - 2020-02-24: openssl TLS driver bugfix: chained certificates were not accepted This was supported since always inside GnuTLS driver, but was missing for openssl one. - 2020-02-24: core bugfix: too early parsing of incoming messages In theory, rsyslog should call parsers on the queue worker threads whenever possible. This enables the parsers to be executed in parallel. There are some cases where parsers needs to be called earlier, namely when parsed data is needed for rate-limiting. The logic to do this previously did not work correctly and was fixed six years ago (!) by b51dd22. Unfortunately, b51dd22 was overly agressive: it actually makes the early parser call now mandatory, effectively moving parsing to the input side where there is no to little concurrency. We still do not need to call the parser when all messages, regardless of severity, need to be rate-limited. This is the default and very frequent case. This patch introduces support for this and as such makes parsers able to run in parallel in the frequent case again. closes https://github.com/rsyslog/rsyslog/issues/4187 - 2020-02-20: testbench bugfix: two minor issues in omkafkadynakey.sh test lead to false positives during test runs (depending on circumstances) closes: https://github.com/rsyslog/rsyslog/issues/4134 - 2020-02-20: testbench: set max extra data length for tcpflood from 200 to 512KiB Added a imrelp test for big messages (256KB). closes: https://github.com/rsyslog/rsyslog/issues/4158 - 2020-02-20: config system bugfix: 'config.enabled' directive oddities Previously the directive was processed way too late which caused false errors whenever it was set to 'off' and possibly other problems. Thanks to Jiri Vymazal for the patch. - 2020-02-09: imfile bugfix: timeout did not work on very busy system The timeout feature was soley based on timeouts of the poll() system call. On a very busy system, this would probably happen very seldomly. Moreover, the timeout could occur later than expected on any system with high load. The issue was not reported from practice but discovered during CI system improvements. - 2020-01-30: build system: change --enable-imfile-tests default to "yes" This was accidentally set to "no" some time ago (actual commit unknown). Tests for imfile should by default run when imfile is enabled. see also https://github.com/rsyslog/rsyslog/issues/4120 - 2020-01-27: build system: add option --enable-gnutls-tests This enables us to build GNUtls support but not necessarily test it in CI. This is useful for some specialised subcomponent test. The default is enabled if gnutls is enabled and disabled if not. - 2020-01-26: testbench: new test for loadbalancing via global vars This is a popular functionality which had not been routinely tested in the past. - 2020-01-26: mmdblookup bugfix: invalid data returned when no entry found Since the upgrade of the package libmaxminddb on FreeBSD (1.3.2_2 -> 1.4.2), the module mmdblookup returns the first entry of the mmdb database even if the entry is not found. After some debug, I found the solution in the official maxminddb repository : to check if the entry is in database, we must check the found_entry attribute, otherwise the function MMDB_get_entry_data_list will return the first entry of the database if the entry is not found in it. Thanks to Kevin Guillemot for the patch. - 2020-01-23: oversize message log bugfix: do not close fd -1 The oversize message log fd is always closed on HUP, even if it never was opened (and thus has -1 value). This patch corrects the issue. The bug had no know-bad effect in practice other than getting an (ignored) error status from close(). However, it introduced warnings in test runs (e.g. when running under valgrind). - 2020-01-22: imfile bugfix: saving of old file_id for statefiles Previously we saved old file_id unconditionally, which led to not deleting old statefiles if files changes without rsyslog running. Now it should work correctly. Thanks to Jiri Vymazal for the patch. - 2020-01-22: imfile bugfix: misadressing and potential segfault Commit 3f72e8c introduced an invalid memory allocation size. This lead to too-short alloc and thus to overwrite of non-owned memory. That in turn could lead to segfaults or other hard to find problems. The issue was detected by our upgraded CI system. We did not receive any problem reports in practice. Nevertheless, the problem is real and people should update affected versions to patched ones. The bug was present in scheduled stable release 8.1911.0 and 8.2001.0. see also: https://github.com/rsyslog/rsyslog/issues/4120 see also: https://github.com/rsyslog/rsyslog/pull/4141 - 2020-01-20: core bugfix: potential race during HUP when rsyslog is HUPed immediately after startup and before it is fully initialized, there is a potential race with the list of loaded modules. This patch ensures no bad things can happen in that case. Detected by LLVM TSAN, not seen in practice. - 2020-01-20: testbench improvements and fixes modernize tests, reduce robustness against slow machines, provide some test framework functional enhancements, and optimize some tests. Also includes some code changes to C testing components. Among others, tests have slightly been speeded up by reducing the wait time at queue shutdown. This is possible because of better overall completion checks. ---------------------------------------------------------------------------------------- Scheduled Release 8.2001.0 (aka 2020.01) 2020-01-14 - 2020-01-12: core bugfix: race condition related to libfastjson when using DA queue Rsyslogd aborts when writing to disk queue from multiple workers simultaneously. It is assumed that libfastjson is not thread-safe. Resolve libfastjson race condition when writing to disk queue. see also https://github.com/rsyslog/rsyslog/issues/4041 Thanks to MIZUTA Takeshi for the fix. - 2020-01-12: omfwd bugfix: parameter streamdriver.permitexpiredcerts did not work closes https://github.com/rsyslog/rsyslog/issues/4098 - 2020-01-11: Bugfix: KSI module + dynafile in asynchronous mode fixed Thanks to Taavi Valjaots for the patch - 2020-01-08: tls driver: add support to configure certificate verify depth Support added in omfwd as instance parameter: streamdriver.TlsVerifyDepth Support added in imtcp as module parameter: streamdriver.TlsVerifyDepth Can be 2 or higher. Support added into ossl driver Support added into gtls driver Added testcases for both drivers. closes: https://github.com/rsyslog/rsyslog/issues/4035 - 2020-01-08: modernization of testbench moved some tests to newer standards, hardened them against slow testbench machines, kafka component download improvements, and prevent dangling left-over test tool instances from aborted tests - 2020-01-07: tls subsystem bugfix: default for permitExpiredCerts was invalidly "on" The problem occurred with commit 3d9b8df in December 2018 and went into scheduled stable 8.1901.0. Unfortunately, the change in default was not detected until a year later. This commit re-enables the previous default ("off"), which is also the only sensible default from a security PoV. Unfortunately, new 2019 deployments may begin to see connection rejection when usin expired certs. As expired certs should not be used, this hopefully will not cause problems in practice. Thanks to Jiri Vymazal for the patch. - 2020-01-01: testbench: improve ElasticSearch test speed We now support re-using suitable running ES instances, which reduces the number of restarts. - 2019-12-31: omelasticsearch: improve curl reply buffer handling The curl reply buffer (pWrkrData->reply) was allocated, realloced and freed with each request. This has now been reduced to once per module, slightly increasing overall performance. closes https://github.com/rsyslog/rsyslog/issues/1964 - 2019-12-31: config system: emit proper error message on $ in double-quoted string closes https://github.com/rsyslog/rsyslog/issues/2869 - 2019-12-30: core bugfix: rsyslog aborts when config parse error is detected In defaut settings, rsyslog tries to continue to run, but some data structures are not properly initialized due to the config parsing error. This causes a segfault. In the following tracker, this is the root cause of the abort: see also https://github.com/rsyslog/rsyslog/issues/2869 - 2019-12-30: fix some alignment issues So far, this worked everywhere (for years). But it may still have caused issues on some platforms. closes https://github.com/rsyslog/rsyslog/issues/2608 - 2019-12-27: core bugfix: APP-NAME fields could become empty RFC 5424 specifies that an empty APP-NAME needs to be indicated by "-". Instead, the field could become empty under certain conditions. If so, outgoing 5424 messages were invalidly formatted. This happened under quite unusual conditions, but could be seen in practice. closes https://github.com/rsyslog/rsyslog/issues/4043 - 2019-12-27: core bugfix: reopen /dev/urandom file descriptor after fork on Linux This patch updates prepareBackground() in tools/rsyslogd.c to reopen any file descriptors used for random number generation in the child process. This fixes an issue on Linux systems where the file descriptor obtained for /dev/urandom by seedRandomNumber() in runtime/srutils.c was left closed after the fork. This could be observed in procfs, where /proc/fd/ would show no open descriptors to /dev/urandom in the forked process. /dev/urandom is reopened as the child may be be operating in a jail, and so should not continue to use file descriptors from outside the jail (i.e. inherited from the parent process). I found that this issue led to rsyslog intermittently hanging during seedIV() in runtime/libgcry.c. After the fork, the closed file descriptor number tended to get re-assigned. randomNumber() would then read from an incorrect (although still valid) file descriptor, and could block (depending on the state of that file descriptor). This gave rise to the intermittent hang that I observed. Thanks to Simon Haggett for the patch. - 2019-12-20: imdocker bugfix: did not compile without atomic operations - 2019-12-20: omclickhouse: new parameter "timeout" Thanks to Pavlo Bashynskiy for the patch. - 2019-12-20: omhiredis: add 'set' mode plus some fixes - new mode 'set' to send SET/SETEX commands - new parameter 'expiration' to send SETEX instead of SET commands (only applicable to 'set' mode) - fixes to missing frees Thanks to github user frikilax for the patch. - 2019-12-18: relp: Add support setting openssl configuration commands. Add new configuration parameter tls.tlscfgcmd to omrelp and imrelp. (Using relpSrvSetTlsConfigCmd and relpCltSetTlsConfigCmd) OpenSSL Version 1.0.2 or higher is required for this feature. A list of possible commands and their valid values can be found in the documentation: https://www.openssl.org/docs/man1.0.2/man3/SSL_CONF_cmd.html The setting can be single or multiline, each configuration command is separated by linefeed (n). Command and value are separated by equal sign (=). Here are a few samples: tls.tlscfgcmd="Protocol=ALL,-SSLv2,-SSLv3,-TLSv1,-TLSv1.2" tls.tlscfgcmd="Protocol=ALL,-SSLv2,-SSLv3,-TLSv1 MinProtocol=TLSv1.2" Add to new testcases for librelp and tlscfgcmd. closes https://github.com/rsyslog/rsyslog/issues/3959 - 2019-12-18: bugfix core: potential segfault in template engine under some circumstances (not entirely clear right now), memory was freed but later re-used as state-tracking structures were not properly maintained. Github issue mentioned below has full details. Thanks to github user snaix for analyzing this issue and providing a patch. I am committing as myself as snaix did not disclose his or her identity. closes https://github.com/rsyslog/rsyslog/issues/3019 closes https://github.com/rsyslog/rsyslog/issues/4040 - 2019-12-18: fixed some minor issues detected by clang static analyzer 9 - 2019-12-10: core/config bugfix: false error msg when config.enabled="on" is used When the 'config.enabled="on"' config parameter an invalid error message was emitted that this parameter is not supported. However, it was still applied properly. This commit removes the invalid error message. closes https://github.com/rsyslog/rsyslog/issues/4011 - 2019-12-03: omsnmp bugfix: "traptype" parameter invalidly rejected value 6 "Traptype" needs to support values 0 to 6. However, if value 6(ENTERPRISESPECIFIC) was set, an invalid error message was emitted. Otherwise processing was correct. This could lead to problems with automatic config deployment, as valid configurations were invalidly reported as incorrect. That in turn could make a deployment fail. closes https://github.com/rsyslog/rsyslog/issues/3973 - 2019-12-03: omsnmp: add new parameter "snmpv1dynsource" If set, the source field from SNMPv1 trap can be overwritten with a template, default is "%fromhost-ip%". The content should be a valid IPv4 Address that can be passed to inet_addr(). If the content is not a valid IPv4 Address, the source will not be set. closes: https://github.com/rsyslog/rsyslog/issues/3991 - 2019-12-02: imfile bugfix: state file renaming sometimes did not work properly Now checking if file-id changes and renaming - cleaning state file accordingly and always checking and cleaning old inode-only style state files. Thanks to Jiri Vymazal for the patch. - 2019-12-02: ratelimit: increase rate limit interval parameter max value The burst parameter in the ratelimit was increased to an unsigned int but the interval remained an unsigned short. While it may be unusual, there is possibly a chance to need to represent an interval longer than about 3/4 of a day. While here, go through and normalize all the various incarnations of rate limiting to be explicitly unsigned int for the burst and interval. Thanks to github user frikilax for the patch. - 2019-12-02: ommongodb: Add other supported formats for 'time' and 'date' fields Thanks to github user frikilax for the patch. - 2019-12-02: imjournal bugfix: too many messages in error case Under certain error conditions, `ignorePreviousMessages="on"` could be ignored an existing messages be processed. Thanks to github user 3chas3 for the patch. - 2019-11-27: core bugfix: action on retry mangles messages When a failed action goes into retry, template content is rendered invalid if the action uses more than 1 template. closes https://github.com/rsyslog/rsyslog/issues/3898 Thanks to Mikko Kortelainen for the patch. - 2019-11-27: testbench: improve mysql testing support tests can now run in parallel and are hardened against several glitches - 2019-11-22: omhttp: add basic support for Loki Rest Loki is a new message indexer and querier from Grafana Labs. See https://github.com/grafana/loki for details on Loki. This change provides the initial message structure to send bulk message payloads to the Loki Rest endpoint. omhttp, received a new bulk message format called lokirest. Additionally, the plugin relies on the user to provide the correct "stream" read message format. A loki template must be json compatible and include a "stream" key of key value tags, and a values key of an array of 2 element arrays, where each 2 element array is the unix epoch in nanoseconds followed by an unstructured message. An example: template(name="array_loki" type="string" string="{\"stream\":{\"host\":\"%HOSTNAME%\",\"facility\":\"%syslogfacility-text%\",\"priority\":\"%syslogpriority-text%\",\"syslogtag\":\"%syslogtag%\"},\"values\": [[ \"%timegenerated:::date-unixtimestamp%000000000\", \"%msg%\" ]]}") - 2019-11-22: testbench: obtain python binary path via AM_PATH_PYTHON see also https://github.com/rsyslog/rsyslog/issues/3853 - 2019-11-22: omprog: detect violation of interface protocol The spec for the omprog interaction with the program it calls specifies that the program receives one message via one line. In other words: it must be a string terminated by LF. However, omprog does currently rely on a proper template to fulfill this requirement, If the template does not provide for the LF, it is never written. For the called program, this looks like it does not receive any input at all. Even if it finally reads data (e.g. due to full buffer), it will not properly be able to discern the messages. This handling is improved with this commit. We cannot just check the template, because at the end of the template may by a non-constant value. As such, we do not know at config load time if there is this problem or not. So the correct approach is to, during runtime, check if each message is properly terminated. For those that are not: * we append a LF, because anything else makes matters worse * log a warning message, at least for a sample of the messages The warning is useful in the (expected most often) case that the template is simply missing the LF. While appending works, it slows down processing. As such the user should be given a chance to correct the config bug. To avoid clutter, the warning is emitted at most once every 30 seconds. This value is hardcoded as we do not envision a need to adjust it. Usually users should quickly fix the template. closes https://github.com/rsyslog/rsyslog/issues/3975 - 2019-11-19: core queue: emit warning if parameters are set for direct queue Direct queues do not apply queue parameters because they are actually no physical queue. As such, any parameter set is ignored. This can lead to unintentional results. The new code detects this case and warns the user. closes https://github.com/rsyslog/rsyslog/issues/77 - 2019-11-19: imjournal bugfix: do not wait too long on recovery try When trying to recover journal errors, imjournal waited a hardcoded period of 10s between tries. This was pretty long and could lead to loss of journal data. This commit adjust it to 100ms, which should still be fully sufficient to prevent the journal from "hammering" the CPU. It may be worth considering to make this setting configurable - but let's first see if there is real demand to actually do that. closes https://github.com/rsyslog/rsyslog/issues/3969 - 2019-11-19: mmutf8fix: enhance handling of incorrect UTF-8 sequences 1. Invalid utf8 detection didn't handle 3 and 4-byte overlong encodings (2 byte overlong encodings were handled explicitly by rejection E0 and E1 start bytes). Unified checks for overlong encodings. 2. Surrogates U+D800..U+DFFF are not valid codepoints (Unicode Standard, D92) 3. Replacement of characters in invalid 3 or 4-bytes encodings was too eager. It must not replace bytes which are valid UTF-8 sequences. For example, in [0xE0 0xC2 0xA7] sequence the 0xC2 is invalid as a continuation byte, but it starts a valid UTF8 symbol [0xC2 0xA7]. That is, with current code processing the sequence will result in "???" but the correct result is "?§" (provided that the replacement character is "?"). 4. Various tests for UTF-8 invalid/valid sequences. Thanks to Sergei Turchanov for the patch. - 2019-11-14: imfile: add new input parameter escapeLF.replacement The new parameter permits to specify a replacement to be configured when "escapeLF" is set to "on". Previously, a fixed replacement string was used ("#012"/"\n") depending on circumstances. If the parameter is set to an empty string, the LF is simply discarded. closes https://github.com/rsyslog/rsyslog/issues/3889 ---------------------------------------------------------------------------------------- Scheduled Release 8.1911.0 (aka 2019.11) 2019-11-12 - 2019-11-12: core queue: add config param "queue.takeFlowCtlFromMsg" This is a fine-tuning option which permits to control whether or not rsyslog shall alays take the flow control setting from the message. If so, non-primary queues may also block when reaching high water mark. This permits to add some synchronous processing to rsyslog core engine. However, it is dangerous, as improper use may make the core engine stall. As such, enabling this option requires very careful planning of the rsyslog configuration and deep understanding of the consequences. Note that the option is applied to individual queues, so a configuration with a large number of queues can (and must if use) be fine-tuned to the exact use case. The rsyslog team strongly recommends to let the option turned off, which is the default setting. see also https://github.com/rsyslog/rsyslog/issues/3941 - 2019-11-12: imrelp: add new config parameter "flowcontrol" This permits to fine-tune the flowControl parameter. Possible values are "no", "light", and "full". With light being the default and previously only value. Changing the flow control setting may be useful for some rare applications, but be sure to know exactly what you are doing when changing this setting. Most importantly, whole rsyslog may block and become unresponsive if you change flowcontrol to "full". While this may be a desired effect when intentionally trying to make it most unlikely that rsyslog needs to lose/discard messages, usually this is not what you want. see also https://github.com/rsyslog/rsyslog/issues/3941 - 2019-11-11: imrelp: remove unsafe debug instrumentation dbgprintf, which is not signal safe, was called from a signal handler to get better understanding during debugging. While this usually works, it can occasionally (5%) lead to a hang during shutdown. We have now removed that debug info as it is no longer vital. Note: this could only happen during debug runs. Production mode was not affected. As such, this fix is only relevant to developers. However, it caused some confusion in the following issue tracker. see also https://github.com/rsyslog/rsyslog/issues/3941 - 2019-11-06: ossl driver bugfix: fix wrong OpenSSL Version check Fix OpenSSL Version check in: - SetGnutlsPriorityString function in nsd_ossl.c - initTLS() function tcpflood.c See https://www.openssl.org/docs/man1.1.0/man3/OPENSSL_VERSION_NUMBER.html for more. This bug lead to not enabling some functionality correctly. Removed "MinProtocol=TLSv1.1" from two testcases because MinProtocol is only supported by OpenSSl 1.1.0 or higher and was not really necessary for the testcases. closes https://github.com/rsyslog/rsyslog/issues/3939 - 2019-11-05: mmdarwin: Optimizations, new parameters, update to protocol header - use permanent worker-dependent buffers to avoid malloc/free for each entry - move socket structures to worker data, remove global mutex - add log lines for parameters and general workflow - don't send body if empty/incomplete (see new parameters) - don't close/reopen socket every time -> let session open or create new every X entry (see new parameters) - clean up code - added 'send_partial', to let mmdarwin send body if not all fields were retrieved, or not; default false = only send complete bodies - added 'socket_max_use' to open new session every X packet, useful for some versions of Darwin (prior to 1.1) default is 0 = do not open new session/keep only one - added 'evt_id' to the darwin header (Darwin v1+ compatibility) Note: mmdarwin is a contributed module Thanks to github user frikilax for the patch. - 2019-11-01: mmkubernetes bugfix: improper use of realloc() could cause problems under extreme memory shortage - very unlikely credits to LGTM.COM for detecting this - 2019-10-31: imjournal: set the journal data threshold to MaxMessageSize When data is read from the journal using sd_journal_get_data it may be truncated to a certain threshold (64K by default). If the rsyslog MaxMessageSize is larger than the threshold, there is a chance rsyslog will receive incomplete messages from the journal. Empirically, this appears to happen reliably when XZ compression is used by journald. Systems where journald uses LZ4 compression do not appear to suffer this issue reliably--if at all. This change sets the threshold to the MaxMessageSize when the journal is opened. Thanks to Robert Winslow Dalpe for the patch. - 2019-10-30: improg bugfix: allow improg to handle multi-line inputs miscellaneous bug fixes in improg: * properly truncate string after an input event is submitted * set msgoffset to 0. * tests added to check above fixes Thanks to Nelson Yen for the fix. - 2019-10-30: mmdblookup bugfix: missing space in city name This fixes the issue that spaces in city names are dropped. However, the fix is more or less a work-around. As it turns out, the libmaxminddb API is not correctly used. In the somewhat longer term, we should fix this. see also https://github.com/maxmind/libmaxminddb/issues/218 closes https://github.com/rsyslog/rsyslog/issues/1650 - 2019-10-30: core/queue: provide ability to run diskqueue on multiple threads Up until this release, disk queues could only use a single thread, what limited their performance with outputs like ElasticSearch. Now disk queues can utilize multiple threads just like any other queue type. Most importantly, the disk queue part of a DA queue now inherits the max number of threads from its memory queue counterpart. NOTE: the new multi-threaded DA disk queue is actually a change of behavior. We have not guarded it by a new config switch as we assume the new behavior is most often exactly within user expectations. In any case, we cannot see any harm from running the disk queue on multiple threads. see also https://github.com/rsyslog/rsyslog/issues/3543 closes https://github.com/rsyslog/rsyslog/issues/3833 - 2019-10-25: omfile bugfix: file handle leak The stream class does not close re-opened file descriptors. This lead to leaking file handles and ultimately to the inability to open any files/sockets/etc as rsyslog ran out of handles. The bug was depending on timing. This involved different OS thread scheduler timing as well as workload. The bug was more common under the following conditions: - async writing of files - dynafiles - not committing file data at end of transaction However it could be triggered under other conditions as well. The refactoring done in 8.1908 increased the likelihood of experiencing this bug. But it was not a real regression, the new code was valid, but changed the timing so that the race was more likely. Thanks to Michael Biebl for reporting this bug and helping to analyze it. closes https://github.com/rsyslog/rsyslog/issues/3885 - 2019-10-22: imfile bugfix: improper use of calloc() could cause problems under extreme memory shortage - very unlikely credits to LGTM.COM for detecting this - 2019-10-22: TLS driver bugfix: improper use of calloc() can cause problems under extreme memory shortage - very unlikely credits to LGTM.COM for detecting this - 2019-10-22: imuxsock bugfix: improper use of calloc() can cause problems under extreme memory shortage - very unlikely credits to LGTM.COM for detecting this - 2019-10-17: build system bugfix: incorrect default in ./configure help text closes https://github.com/rsyslog/rsyslog/issues/3904 Thanks to Michael Biebl for pointing this out. - 2019-10-17: mmkubernetes bugfix: improper use of calloc() can cause problems under extreme memory shortage - very unlikely credits to LGTM.COM for detecting this - 2019-10-16: core queue bugfix: propagate batch size to DA queue This was a long-standing bug where the DA queue always had a fixed small batch size because the setting was not propagated from the memory queue. This also removes a needless and counter-productive "debug aid" which seemed to be in the code for quite some while. It did not cause harm because of the batch size issue. - 2019-10-16: testbench: fix unreliable gzipwrite test The test was timing-sensitive as we did not properly check all data was output to the output file - we just relied on sleep periods. This has been changed. Also, we made some changes to the testing framework to fully support sequence checking of multiple ZIP files. - 2019-10-16: core queue bugfix: handle multi-queue-file delete correctly Rsyslog may leave some dangling disk queue files under the following conditions: - batch sizes and/or messages are large - queue files are comparatively small - a batch spans more than two queue files (from n to n+m with m>1) In this case, queue files n+1 to (n+m-1) are not deleted. This can lead to problems when the queue is re-opened again. In extreme cases this can also lead to stalled processing when the max disk space is used up by such left-over queue files. Using defaults this scenario is very unlikely, but it can happen, especially when large messages are being processed. - 2019-10-16: imjournal: fix regression from yesterday's patch commit 78976a9bc059 introduced a regression that caused writing the journal state file to fail. This happens when the state file is given as relative file name and the working directory is also a relative path. This situation is very uncommon. So most deployments will never experience it. We discovered the issue during CI runs where the trigger condition is given. Note that it also takes multiple times of loading the journal to actually see the bug. see also https://github.com/rsyslog/rsyslog/pull/3878 - 2019-10-15: imjournal plugin code restructuring, added remote option Decomposed ReadJournal() a bit, also now coupling journald variables in one struct, added few warning messages and debug prints to help with bug hunts in future, also got rid of two needless journald calls. WorkAroundJournalBug now deprecated. Added option to pull journald records from outside local machine. Thanks to Jiri Vymazal for the patch. - 2019-10-11: core bugfix: potential abort on very long action name The action name is stored in modified form for the debug header and some messages. If it is extremely long, a buffer can be overrun, resulting in misaddressing and potential segfault for rsyslog. This can also happen if the action is NOT named, but a custom path to the output module is given and that path is very long. This triggers the same issue because by default the module load path is included in the action name. This patch corrects the problem and truncates overly long names when being used for name generation. The problem was detected during testbench work. We did never receive a bug report from practice. - 2019-10-10: testbench: add test for mmpstrucdata with RFC5424 escape sequences ---------------------------------------------------------------------------------------- Scheduled Release 8.1910.0 (aka 2019.10) 2019-10-01 - 2019-10-01: core bugfix: incorrect error message on duplicate module load A Null-pointer was passed to printf instead of the module name. On some platforms this may lead to a segfault. On most platforms printf check's for NULL pointers and uses the string "(null)" instead. In any case, the module name is missing from the error message. - 2019-10-01: imczmq nitfix: potential NULL ptr in printf on out-of-memory condition very unlikely to happen but if it does without any real issue on most platforms. - 2019-10-01: work around some compiler warning messages induced by pthreads API - 2019-10-01: core ratelimiting: more verbose message when rate-limiting happens When messages are rate-limited, the error message now also contains the rate limiter setting. This enables the user to more quickly understand what the problem is (especially if default values apply). Thanks to Jiri Vymazal for the patch. - 2019-10-01: openssl TLS driver: do not emit unnecessary error message On older openssl versions, an API was missing to set user-defined parameters. If we had such an older version, rsyslog emitted an error message even if the user did not configure such parameters. This has been corrected, so that a message is only emitted if there really is a problem. Based on user feedback the severity has also been downgraded to "warning". - 2019-10-01: pmcisconames (contributed module) bugfix: potential misaddressing - 2019-09-30: pmaixforwardedfrom (contributed module) bugfix: potential misaddressing - 2019-09-30: pmdb2diag (contributed module) bugfix: Out of bounds issue Add a new sanity check after determining the level len. Thanks to Philippe Duveau for the patch. see also: https://nvd.nist.gov/vuln/detail/CVE-2019-17040 - 2019-09-02: ability to set stricter TLS operation modes - checking of extendedKeyUsage certificate field - stricter checking of certificate name/addresses Thanks to Jiri Vymazal for the patch. - 2019-08-21: testbench: add basic test for immark - 2019-08-20: core: do not unnecessarily set hostname on each HUP - 2019-08-20: build system: support cross-platform build for mysql/mariadb rsyslog fails to cross build from source, because it uses mysql_config and mysql_config is unfixably broken for cross compilation. It would be better to use pkg-config. The attached patch makes rsyslog try pkg-config first and fall back to mysql_config. Thanks to Helmut Grohne for providing a base patch. - 2019-08-20: core/tcpsrv: potential race on startup/shutdown if the tcpsrv component is started and quickly terminated, it may hang for a short period of time. Also a very small amount of memory is leaked immediately before shutdown. While this leak is irrelevant in practice (the OS clean up the process anyways), it leads to CI failures. The hang, however, can lead to longer than expected shutdown times for rsyslog. The problem can be experienced via imtcp, imgssapi and imdiag (users of affected core component). ---------------------------------------------------------------------------------------- Scheduled Release 8.1908.0 (aka 2019.08) 2019-08-20 - 2019-08-19: testbench: add test for $allowedSender functionality - 2019-08-19: testbench: harden some tests against very slow CI machines - 2019-08-16: testbench: make most tests use a port file and assign listen port 0 This makes the test much more robust against heavily loaded test systems. - 2019-08-16: core/action: guard action.externalstate.file content against whitespace remove trailing whitespace before checking the status string. This is most important as a line usually ends with \n, which is considered trailing whitespace. Accepting this increases usability. - 2019-08-16: imtcp bugfix: multiple listenerPortFile parameter did not work ... because they were treated as module-global. If we had multiple imtcp listeners with multiple port files, only the last filename was always used. closes https://github.com/rsyslog/rsyslog/issues/3817 - 2019-08-16: testbench: improve testbench plumbing for gzip and fail cases We have added new capabilities to the testbench plumbing to automatically deal with gzip-compressed files. This also permits to use the wait_seq_check function to work for gzip tests as well. The known-timing-sensitive gzipwr_large test now makes use of the new capabilities. This enables us to more reliably detect when we can savely shutdown the tested instance. This commit also adds an ability to "abort" the full testbench run on first test failure. This is especially useful during CI. - 2019-08-13: testbench: add test for imuxsock legacy format This was never tested. Ensures we don't accidentally break existing configurations. - 2019-08-13: omelasticsearch bugfix: segfault on unknown retryRuleset omelasticsearch does some "interesting tricks" for an output module. This causes a segfault if the retryRuleset is now known. The action module interface currently expects that all config errors be detected during instance creation. Instead omelasticsearch defers the retry ruleset check to a later state. The reason is that it wants to support the use the same rulesetname it is defined in - and this is not yet available at action parsing. We fix this by ensuring that any deleted instance is properly unlinked from the instance list. One may argue the module interface should get upgrade for such cases, but this is a longer-term approach. closes https://github.com/rsyslog/rsyslog/pull/3796 - 2019-08-12: imptcp bugfix: port="0" parameter did not work as expected when multiple interfaces and/or protocols could be bound, each of them used a different listener ports were assigned. While this is basically correct, it makes things unusable, especially as listenPortFileName will only contain the port number used for the latest listener. This patch now follows the model of nsd_ptcp.c to assign only the first port randomly and then use that port consistently. - 2019-08-10: omelasticsearch bugfix: potential resource leak with "rebindinterval" If the "rebindInterval" parameter was used connections could be linked. This was especially the case with small intervals (such as "2"). This is fixed by forcing libcurl to close the connection on rebind. Thanks to Noriko Hosoi for providing the patch. - 2019-08-10: imjournal bugfix: state file close with fsync() was incorrect This lead to fsync() now always applied where expected. Thanks to Jiri Vymazal for the patch. - 2019-08-10: testbench: add addtl test for multithreading and HUP - 2019-08-10: imptcp bugfix: received bytes counter improperly maintained imptcp counts the number of bytes received. However, receives happen on different worker thread. The access to the counter was not synchronized, which can cause loss of updates. Also, thread debuggers validly flag this as an error, which creates problems under CI. This commit fixes the situation via atomic operations and falls back to mutex calls if they are not available. Detected by LLVM thread sanitizer. closes https://github.com/rsyslog/rsyslog/issues/3798 - 2019-08-07: testbench: add basic tests for omusrmsg - 2019-08-05: omhttp bugfix: enable checkpath configuration parameter omhttp, 'checkpath' option, was not configurable in the past. - add 'checkpath' to the cnfparamdescr table. - fix issue with checkpath passing extra garbage characters in string. - add 'checkpath' into unit test - omhttp-retry.sh Thanks to Nelson Yen for the fix. - 2019-08-05: testbench bugfix: some tests were executed when req module was missing In actual case if --enable-impstats was not given some other tests failed. - 2019-08-03: iminternal bugfix: race on termination This could in theory lead to loss of shutdown messages, but was mostly a cosmetic issues. We primarily fixed it to get TSAN-clean so that we can utilize LLVM TSAN in CI. - 2019-08-02: testbench: new test for omfile outchannel functionality - 2019-08-02: core/janitor bugfix: properly maintain dynafile cache When the janitor cleans out timed-out files, it does not properly indicate the entry is gone. Especially when running in async mode this can lead to use-after-free and thus memory corruption or segfault. see also https://github.com/rsyslog/rsyslog/issues/3756 - 2019-08-01: omfile bugfix: race file when async writing is enabled This seems to be a long-standing bug, introduced around 7 years ago. It became more visible by properly closing files during HUP, which was done in 8.1905.0 (and was another bugfix). Note that due to this race a memory corruption can occur under bad circumstances. As such, this may have also caused segfaults or system hangs (mutexes could have been affected). closes https://github.com/rsyslog/rsyslog/issues/3772 - 2019-08-01: testbench: additional tests for HUP - 2019-07-31: imrelp bugfix: hang after HUP termination condition was not properly checked; this lead to premature termination after patch 1c8712415b9 was applied. It is open to debate if patch 1c8712415b9 changed the module interface. Actually it looks like this was previously not well thought out. closes https://github.com/rsyslog/rsyslog/issues/3760 - 2019-07-24: mmdarwin: add new module This is a contributed module. For details see doc. Thanks to the Advens team for contributing it. - 2019-07-23 iminternal bugfix: suppress mutex double-unlock If there is a burst of log messages during a time when rsyslog is unable to output (either during log rotation, an out-of-space condition, or some other similar condition), rsyslog can SEGFAULT due to a mutex double-unlock. - 2019-07-23 imtcp: enable listenPortFileName parameter this parameter was added, but it had no effect as it was not passed down to the driver layer. This has been fixed. That also now enables us to use dynamically-assigned port, which are very useful for further testbench stabilization. Quite some false positives occurred because the pre-selected port was already in use again when rsyslog started. - 2019-07-19 imtcp: enable listenPortFileName parameter this parameter was added, but it had no effect as it was not passed down to the driver layer. This has been fixed. That also now enables us to use dynamically-assigned port, which are very useful for further testbench stabilization. Quite some false positives occurred because the pre-selected port was already in use again when rsyslog started. - 2019-07-18 core/action: no error file written if act suspended on TX commit when an action was already disabled while the action was tried to be committed, no error file was written. Note that this state is highly unlikely to happen. Most probably, it can only happen if parameter action.externalstate.file is used. ---------------------------------------------------------------------------------------- Version 8.1907.0 (aka 2019.07) 2019-07-09 NOTE TO MAINTAINERS: libee is not used by rsyslog for quite some while. However, we never included this info into the changelog. So if you still make rsyslog depend on libee (some do this), you should stop doing so now. Libee is dead and no longer been maintained nor hosted by us. Old versions can still be found at github for those in need. GENERAL NOTE: during 8.1907 scheduled release timeframe we changed the ChangeLog format to include the date a change went into master branch. This is to provide an easy way to identify which changes went into the respective daily stable. - 2019-07-05 imuxsock: support FreeBSD 12 out of the box FreeBSD 12 uses RFC5424 on the system log socket by default. This format is not supported by the special parser used in imuxsock. Thus for FreeBSD the default needs to be changed to use the regular parser chain by default. That is all this commit does. closes https://github.com/rsyslog/rsyslog/issues/3694 - 2019-07-05 function bugfix: "ipv42num" misspelled as "ip42mum" (without "v") To fix the issue but keep compatible with existing deployments both function names are now supported. closes https://github.com/rsyslog/rsyslog/issues/3676 - 2019-07-04 fix leading double space in rsyslog startup messages see also https://github.com/rsyslog/rsyslog/issues/2979 - omamqp1: port to latest api, add tests This brings omamqp1 up-to-date with the latest qpid-proton-c api version. This also adds a test for the plugin, to test the basic functionality. The test requires the user to install qdrouterd and the python qpid-proton library in order to use the simple_recv.py test program. Thanks to Richard Megginson for the patch. - omclickhouse bugfix: potential segfault on omclickhouse batchmode segfault happened when the template did not contain the string "VALUES". Thanks to github user wdjwxh for the fix. - core bugfix: message duplication copied incorrect timestamp MsgDup() placed timereported into timegenerated property, resulting in invalid property values. Original timegenerated was lost. This occurred always when a message needed to be duplicated. Most importantly this is the case when queues are used. closes https://github.com/rsyslog/rsyslog/issues/3716 - core bugfix: segfault on startup depending on queue file names rsyslog will segfault on startup when a main queue file name has been set and at least on other queue contains a file name. This was cased by too-early freeing config error-detection data structures. It is a regression caused by commit e22fb205a3. Thanks to Wade Simmons for reporting this issue and providing detailed analysis. That greatly helps fixing it quickly. closes https://github.com/rsyslog/rsyslog/issues/3681 - core "bugfix": alignment issue This was not a hard error on current platforms, but a to-be-considered compiler warning regarding invalid alignment. While it works well on current platforms, alignment issues may turn into real issues in future platforms. So we try to fix them if possible. As not only a side-effect this resolves compiler warnings even on current platforms. This fix has some regression potential. If so, the problems may occur during IP address resolution. see also https://github.com/rsyslog/rsyslog/issues/2608 - omfile bugfix: potential hang/segfault on HUP of dynafile action when omfile was HUPed it did not sufficiently clear all dynafile cache maintenance data structures. This usually lead to misaddressing and could result in various issues, including a hang of rsyslog processing or segfaults. It could also have "no effect" by pure luck of not hitting anything important. This actually seems to have been the most frequent case. This seems to be a long-standing bug, but the likelihood of its appearance seems to have been increased by commit 62fbef7 introduced in 8.1905. Note: the commit itself has no regression, just increases the likelihood to trigger the pre-existing bug. special thanks to Alexandre Guédon for his help in analyzing the issue - without him, we would probably still not know what actually went wrong. closes https://github.com/rsyslog/rsyslog/issues/3686 - imjournal bugfix: potential message duplication When journal was preloaded from previously saved cursor it was not advanced to next entry so reading begun from last message which was therefore duplicated. Thanks to Jiri Vymazal for the patch. - rfc5424 parser bugfix: leading space sometimes lost if structured data is present a leading space in MSG field is lost - queue subsystem bugfix: oversize queue warning message shown as error The warning message was emitted as an error message, which is misleading and may also break some automated procedures. - core bugfix: HUP did not work reliable on all platforms most notably not on FreeBSD, maybe others. The reason was obviously different handling of signals in respect to multiple threads. - build system bugfix: missing files in distribution tarball - testbench * fixed "make distcheck" settings which were missing some modules This lead to incomplete "make distcheck" run; some errors were not detected due to that. * testbench framework: use ip tool instead of outdated ifconfig The framework now first checks if "ip" is available and falls back to "ifconfig" only if this is not the case. Thanks to Michael Biebl for the suggestion. closes https://github.com/rsyslog/rsyslog/issues/3682 ------------------------------------------------------------------------------ Version 8.1905.0 (aka 2019.05) 2019-05-28 - templates: add datatype template option for JSON generation The new "datatype" and "onEmpty" template options permits to generate non-string data rather easily. It works together with jsonf formatting, which is what people should use nowadays. closes https://github.com/rsyslog/rsyslog/issues/2827 - config processing: check disk queue file is unique If the same name is specified for multiple queues, the queue files will become corrupted. This commit adds a check during config parsing. If duplicate names are detected the config parser errors out and the related object is not created. Note: this may look to a change-of-behavior to some users. However, this never worked and it was pure luck that these users did not run into big problems (e.g. DA queues were never going to disk at the same time). So it is acceptable to error out in this hard error case. closes https://github.com/rsyslog/rsyslog/issues/1385 - global config: new parameters for ruleset queue defaults specifically: * default.ruleset.queue.timeoutshutdown * default.ruleset.queue.timeoutactioncompletion * default.ruleset.queue.timeoutenqueue * default.ruleset.queue.timeoutworkerthreadshutdown closes https://github.com/rsyslog/rsyslog/issues/3656 - add capability to write full config file (-o cmdline option) Introduces the capability to create an output config file that explodes all "includes" into a single file. This provides a much better overview of how exactly the configuration is crafted. That could often be a great troubleshooting aid. This commit also contains some slight not-really-related cleanup. closes https://github.com/rsyslog/rsyslog/issues/3634 - queue subsystem: permit to disable "light delay mark" New semantic: if lightDelayMark is 0, it is set to the max queue size, effectively disabling the "light delay" functionality. Thanks to Yury Bushmelev to mentioning issues related to light delay mark and proposing the solution (which actually is what this commit does). closes https://github.com/rsyslog/rsyslog/issues/1778 - queue subsystem: provide better user status messages The queue subsystem now provides additional information messages which may help a regular user to maintain system health. Most importantly, DA queues now output when they persist queue data at end of run and when they restart the queue based on persisted data. - core: emit a warning message for ultra-large queue size definitions We see error reports from users who have configured excessively large queues and receive an OOM condition or other problems. With that patch we generate a warning message if a queue is configured very large. "Very large" is defined to be in excess of 500000 messages. see also https://github.com/rsyslog/rsyslog/issues/3314 closes https://github.com/rsyslog/rsyslog/issues/3334 - new global config parameter "internalmsg.severity" permits to specify a severity filter for internal message. Only messages with this severity level or more severe are logged. Originally this was done in rsyslog.conf as usual: you can filter rsyslog messages on severity, just like any other. But with systemd, we now emit primarily to the journal, and this is outside of rsyslog's rule engine and so regular filters do not apply (at least in regard to the journal). Logging to journal is good, because finally folks begin to see the messages (traditional distro configs discard them, for whatever is the reason). This commit implements a global setting for a severity-based filter for internal messages, before submitted to journal. So it's not 100% of what rsyslog can do, but at least some way to customize. see also https://github.com/rsyslog/rsyslog/issues/3639 - config processing bugfix: error messages if config.enabled="off" is used Using config.enabled="off" could lead to error messages on "parameter xxx not known", which were invalid. They occurred because the config handler expected them to be used, which was not the case due to being disabled. This commit fixes that issue. closes https://github.com/rsyslog/rsyslog/issues/2520 - core portability bugfix: harden shutdown processing on FreeBSD On FreeBSD, rsyslog does not always terminate immediately on SIGTERM. Root cause seems to be that SIGTERM is delivered differently under FreeBSD. This causes the main thread to not be awaken, and so it takes until the next janitor interval to come back to life - which can be far too long. Fixed this bug explicitly awaking the main thread. - imtcp bugfix: oversize message truncation causes log to be garbled The actual problem is in the tcpserver component. However, the prime user is imtcp and so users will likely experience this as imtcp problem. When a too-long message is truncated, the byte after the truncation position becomes the first byte of the next message. This will garble the next messages and in almost all cases render it is syslog-noncompliant. The same problem does NOT occur when the message is split. This commit fixes the issue. It also includes a testbench fix. Unfortunately the test for exactly this feature was not properly crafted and so could not detect the problem. closes https://github.com/rsyslog/rsyslog/issues/3580 - omfile bugfix: FlushOnTXEnd does not work reliably with dynafiles The flush was only done to the last dynafile in use at end of transactions. Dynafiles that were also modified during the transaction were not flushed. Special thanks to Duy Nguyen for pointing us to the bug and suggesting a solution. This commit also contains a bit of cosmetic cleanup inside the file stream class. closes https://github.com/rsyslog/rsyslog/issues/2502 - lmcry_gcry build bugfix: was not always properly build Due to an invalid definition in build system this seems to have not been correctly build on at least some platforms (but it worked on others as it passed CI testing). This has now been corrected. Thanks to Remi Locherer for the patch. - dnscache bugfix: very unlikely memory leak This fixes a memory leak that can only occur under OOM conditions. Detected by Coverity Scan, CID 203717 - testbench bugfix: wrong parameter check in diag.sh (tcpflood()) When first parameter is check_only, the tcpflood funtion shall not abort the test itself (The fail is intended if this option is set). closes issue #3625 - testbench bugfix: imfile-symlink test failed w/ parallel test run The test sometimes failed. It used a symlink to a hardcoded name rsyslog-link.*.log. This symlink was created but then disappears. The reason is that upon (every!) test exit, rsyslog-link.*.log is deleted. So a parallel test running the exit procedure just at the "right" time can removed that file. The bug is that the file name should be created using the tests's dynamic name. This is done now. closes https://github.com/rsyslog/rsyslog/issues/3550 ------------------------------------------------------------------------------ Version 8.1904.0 (aka 2019.04) 2019-04-16 - omfile: provide more helpful error message on file write errors now contains actual file name plus a link to probable causes for this type of problem - imfile: emit error on startup if no working directory is set When the work directory has not been set or is invalid, state files are created in the root of the file system. This is neither expected nor desirable. We now complain loudly about this fact. For backwards compatibility reasons, we still need to support running imfile in this case. closes https://github.com/rsyslog/rsyslog/issues/1296 - dnscache: add global parameter dnscache.default.ttl This permits to control default TTL for cache entries. If set to 0, the DNS cache is effectively disabled. closes https://github.com/rsyslog/rsyslog/issues/49 closes https://github.com/rsyslog/rsyslog/issues/1487 - omelasticsearch: new parameter rebindinterval Thanks to Richard Megginson for the patch. - omelasticsearch: new parameter skipverifyhost Add ability to specify the libcurl CURLOPT_SSL_VERIFYHOST option to skip verification of the hostname in the peer cert. WARNING: This option is insecure, and should only be used for testing. The default value is off, meaning, the hostname will be verified by default. Thanks to Richard Megginson for the patch. - omelasticsearch: set rawmsg to data from original request Previously, when constructing the message to submit for a retry for an original request, if the original request did not contain the field `message`, the system property `rawmsg` was set to the entire metadata + data from the original request. This was causing problems with Elasticsearch. This patch changes the code so that the `rawmsg` will be set to only the data part of the original request if there is no `message` field. closes https://github.com/rsyslog/rsyslog/issues/3573 Thanks to Richard Megginson for the patch. - mmkubernetes - support for metadata cache expiration New parameters for mmkubernetes (module and action): * `cacheexpireinterval` If `cacheexpireinterval` is -1, then do not check for cache expiration. If `cacheexpireinterval` is 0, then check for cache expiration. If `cacheexpireinterval` is greater than 0, check for cache expiration if the last time we checked was more than this many seconds ago. * `cacheentryttl` - maximum age in seconds for cache entries New statistics counters: * `podcachenumentries` - the number of entries in the pod metadata cache. * `namespacecachenumentries` - the number of entries in the namespace metadata cache. * `podcachehits` - the number of times a requested entry was found in the pod metadata cache. * `namespacecachehits` - the number of times a requested entry was found in the namespace metadata cache. * `podcachemisses` - the number of times a requested entry was not found in the pod metadata cache, and had to be requested from Kubernetes. * `namespacecachemisses` - the number of times a requested entry was not found in the namespace metadata cache, and had to be requested from Kubernetes. - imdocker: new contributed module imdocker will get (docker) container logs from a host as well as filling out some basic container metadata as id, name, image, labels. Thanks to Nelson Yen for the contribution. - mmtaghostname: new contributed module This module allows one to force hostname after parsing to the localhostname of rsyslog and/or add a tag to messages received from input modules without tag parameter. Thanks to Philippe Duveau for the contribution. - imbatchreport: new contributed input module This input module manage batches' reports : complete file as a single log. Thanks to Philippe Duveau for the contribution. - imtuxedolog: new contributed input module for Tuxedo ULOG Thanks to Philippe Duveau for the contribution. - openssl network driver: Added support setting openssl configcommands We are using the gnutlsPriorityString setting variable, to pass configuration commands to openssl. closes: https://github.com/rsyslog/rsyslog/issues/3605 - omkafka: drop messages rejected due to being too large Drop messages that were rejected due to 'RD_KAFKA_RESP_ERR_MSG_SIZE_TOO_LARGE' error Thanks to Nelson Yen for the patch - core/action: implement capability to resume/suspend via external file It has been reported that some TCP receivers exists that accept syslog tcp messages at any rate, even if they do not manage to actually process them. Instead, they silently drop the message. This behavior is not configurable. All in all, it can lead to considerate message loss. To support such use cases, we need to provide an ability to externally trigger actions suspension and resumption. We do this via a configured file which contains the status of the action. Rsyslog periodically reads the file and if it contains "SUSPEND", it suspend the action (and likewise for resume). closes https://github.com/rsyslog/rsyslog/issues/2924 - improg bugfix: some memory leaks Thanks to Philippe Duveau for the contribution. - msg object bugfix: regression from 1255a67 closes https://github.com/rsyslog/rsyslog/issues/3570 - pmnormalize: fix memory leaks, improve tests This patch fixes a set of problems plus provides more and enhanced tests for the module. Most important problem was a memory leak that occurred when a message could not be passed at all. For each message that could not be parsed memory of at least the size the message is leaked. Depending on traffic pattern this can quickly lead to OOM. Note, however, that this leak was never reported - it was discovered as part of code review. closes https://github.com/rsyslog/rsyslog/issues/2007 - omkafka bugfix: build failure due to inconsistent type fails depending on platform and settings; was somehow undetected by CI - imjournal bugfix: potential segfault on some API failure returns In one case there was possibility of free()'d value of journal cursor not being reset, causing double-free and crash later on. closes https://github.com/rsyslog/rsyslog/issues/3537 - openssl subsystem bugfix: better error handling Handling of SSL_ERROR_SYSCALL has been hardened. Handling for SSL_Shutdown errors has been corrected. Also fixed SSL Shutdown handling in tcpflood (openssl code). If SSL_Shutdown returns error, we call SSL_read as described in the documentation to do a bidirectional shutdown. Closes https://github.com/rsyslog/rsyslog/issues/3561 - imjournal bugfix: Fetching journal cursor only for valid journal The sd_journal_get_cursor() got called regardless of previous retcodes from other journal calls which flooded logs with journald errors. Now skipping the call in case of previous journal call non-zero result. Fixed success checking of get_cursor() call to eliminate double-free possibility. Also, making WorkAroundJournalBug true by default, as there were no confirmed performance regressions for a quite long time. Thanks to Jiri Vymazal for the patch. - omamqp: fix build errors They occur on some, newer, platforms. We do not really fix them, but rather make the compiler ignore them. This is not really good, but the module is contributed and so that's for now the best thing we can do. - testbench: change manytcp.sh to use a larger connection count again not sure why it was reduced, maybe related to https://github.com/rsyslog/rsyslog/issues/1108 also, modernize this and another test - tcpflood bugfix: make soft connection limit work again It looks like the soft limit became defunct when tcpflood was enhanced to request more open file handles from OS. closes https://github.com/rsyslog/rsyslog/issues/1108 - testbench bugfix: omhttp tests were not run during "make distcheck" - build system bugfix: omhttp test files were not included in dist tarball Thanks to Thomas D. (whissi) for the patch. ------------------------------------------------------------------------------ Version 8.1903.0 (aka 2019.03) 2019-03-05 - omrabbitmq: add features (RabbitMQ HA management, templatize routing_key, populate amqp message headers, delivery_mode and expiration parameters) - improg: create input module to use external program as input datas - imtuxedoulog: create input module to consume Tuxedo ULOG files - omhttp: rewritten with large feature enhancements Many thanks to Gabriel Intrator for this work. Gabriel also has adopted the module and plans to support it in the future. - pmdb2diag: create parser module for DB2 diag logs - TLS subsystem: add support for certless communication both openssl and GnuTLS drivers have been updated to support certless communications. In this case e.g. Diffie-Helman is used. NOTE: this is an insecure mode, as it does NOT guard against man-in-the-middle attacks. We implemented it because of the large demand, not because we think it makes sense to use this mode. We strongly recommend against it. closes https://github.com/rsyslog/rsyslog/issues/1068 - imrelp/omrelp: add capability to specify tlslib for librelp closes https://github.com/rsyslog/rsyslog/issues/3451 - build system: introduce a better way to handle compiler pragmas we now use macros and _Pragma(). This requires less code lines and is more portable. - omkafka: add support for dynamic keys A new configuration property "dynaKey" is added that, when "on", changes the value of property "key" to a template names instead of a constant value. This is similar in approach to the DynaTopic implementation. Thanks to Ludo Brands for the patch. - AIX port: add AIX linking extensions on many plugins and contributions to allow building them on this os. - template: add Time-Related System Property $wday which is the day of week This allows one to get a week based rotation of log as AIX does. - ksi subsystem: add high availability mode Note: ksi subsystem now REQUIRES libksi 3.19.0 or above Thanks to Allan Park for the patch. closes https://github.com/rsyslog/rsyslog/issues/3338 - imfile bugfix: file reader could get stuck State file handling was invalid. When a file was moved and re-created rsyslog could use the file_id if the new file to write the old files' state file. This could make the file reader stuck until it reached the previous offset. Depending on file sizes this could never happen AND would cause large message loss. This situation was timing dependent (a race) and most frequently occurred under log rotation. In polling mode the bug was less likely, but could also occur. closes: https://github.com/rsyslog/rsyslog/issues/3465 closes: https://github.com/rsyslog/rsyslog/issues/3468 - imfile bugfix: potential segfault when working with directories or symlinks see also https://github.com/rsyslog/rsyslog/pull/3496 Thanks to Nelson Yen for the patch - omhttp bugfix: header items could not have spaces in them Thanks to Nathan Brown for the patch. - core bugfix: enlarged msg offset types for bigger structured messages using a large enough (dozens of kBs) structured message it is possible to overflow the signed short type which leads to rsyslog crash. (applies to msg.c, the message object) Thanks to Jiri Vymazal for the patch. - core bugfix for AIX: timeval2syslogTime now handle the bias according to local time zone as documented by IBM. - imfile feature: add configuration parameter to force parsing of read logs - imczmq bugfix: Release zframe following read from socket Make the 0MQ frame pointer local to the receive loop and destroy the frame as soon as the contents have been copied. This avoids: * a memory leak should the receive loop execute more than once * referencing an un-initialized value during cleanup (finalize_it) Thanks to Mark Gillott for the patch. - omclickhouse bugfix: default template unusable STDSQL option added to the default template used in output module of clickhouse Thanks to gagandeep trivedi for the patch. - omclickhouse "bugfix": work-around failed error detection omclickhouse uses a questionable method to check if a request generated an error. We have seen the method to fail when we slightly upgraded clickhouse server in CI testing. This commit makes the method a bit more reliable without really fixing it. But it's at least a short-term solution. This should be changed to a proper status check. I assume such is possible. see also https://github.com/rsyslog/rsyslog/issues/3485 - imptcp bugfix: overly long socket bind path can lead to segfault if the `path` input parameter is overly long (e.g. more than 108 characters on some platforms) a non-terminated string is generated and then passed to OS API. This can lead to all sorts of problems including segfault. We detected that based on gcc-8 warnings during code inspection. No real-world problem case is known. - ommongodb bugfix: improper stpncpy() calls - testbench tcpflood: add new transport option relp-tls Tcpflood can now send messages via relp with tls support. closes https://github.com/rsyslog/rsyslog/issues/3448 - testbench: mmdb valgrind tests failed is srcdir env was not set - testbench: add omclickhouse tests - testbench bugfix: some long-running tests had too low runtime allowance closes https://github.com/rsyslog/rsyslog/issues/3493 - testbench bugfix: daqueue-dirty-shutdown test This test occasionally failed with left-over spool files. As far as we have analyzed, this is due to the use of an invalid shutdown timeout (very short) in the second phase of the test. It looks like this is actually a copy&paste error from phase one. Behavior of rsyslog was correct, but the test itself created a false positive. We have corrected the timeout now and also modernized the test a bit. closes https://github.com/rsyslog/rsyslog/issues/2122 - testbench bugfix: some omhttp tests had compatibility issues with Python 3 Thanks to Thomas D. (whissi) for the patch. ------------------------------------------------------------------------------ Version 8.1901.0 (aka 2019.01) 2019-01-22 - new version scheme: 8.yymm.0 - version now depends on release date see also https://rainer.gerhards.net/2018/12/rsyslog-version-numbering-change.html - queue: add support for minimum batch sizes closes https://github.com/rsyslog/rsyslog/issues/495 - change queue.timeoutshutdown default to 10 for action queues The previous default of 0 gave action queues no real chance to shutdown - at the time they were applied, they were usually already expired (computing the absolute timeout took a small amount of time). So we change this now to 10ms, which still is very quick but gives the queue at least a chance to shutdown itself. That in turn smoothes the whole shutdown process. If a very large number of action queues is used this may lead to a very slightly longer shutdown time, albeit this is very improbable. - omclickhouse: new output module for clickhouse This output module adds the possibility to send INSERT querys to a Clickhouse database. See doc for details. The messages are sent via a REST interface. This commit also adds support of the testbench for clickhouse tests, as well as various tests. Closes https://github.com/rsyslog/rsyslog/issues/2272 - omkafka: Add ability to dump librdkafka statistics to a file Use statsFile to specify statistics output file; also requires setting statistics.interval.ms confparam to a non-zero value. Thanks to github user pcullen65 for the contribution. - tls(ossl/gtls): add new Option "StreamDriver.PermitExpiredCerts" The new Option can have one of the following values: on = Expired certificates are allowed off = Expired certificates are not allowed warn = Expired certificates are allowed but warning will be logged (Default) Includes necessary tests to validate new code. closes https://github.com/rsyslog/rsyslog/issues/3364 - action: add "action.resumeIntervalMax" parameter This parameter permits to set an upper limit on the growth of the retry interval. This is most useful when a target has extended outage, in which case retries can happen very infrequently. closes https://github.com/rsyslog/rsyslog/issues/3401 - report child process exit status according to config parameter Add new global setting 'reportChildProcessExits' with possible values 'none|errors|all' (default 'errors'), and new global function 'glblReportChildProcessExit' to report the exit status of a child process according to the setting. Invoke the report function whenever rsyslog reaps a child, namely in: - rsyslogd.c (SIGCHLD signal handler) - omprog - mmexternal - srutils.c (execProg function, invoked from stream.c and omshell) Remove redundant "reaped by main loop" info log in omprog. Promote debug message in mmexternal indicating that the child has terminated prematurely to a warning log, like in omprog. closes https://github.com/rsyslog/rsyslog/issues/3281 Thanks to Joan Sala for contributing this. - build system: add capability to turn off helgrind tests we add configure switch --enable-helgrind. We need to turn helgrind off when we use clang coverage instrumentation. The instrumentation injects mt-unsafe counter updates which we seem to be unable to suppress. Note: for gcc this was possible, because they all occurred in a utility function. For clang, they are inlined so we get many -and changing- violations. see also https://github.com/rsyslog/rsyslog/issues/3361#issuecomment-450502569 - imzmq3/omzmq3: remove modules according to @brianknox (their author) these modules are outdated: https://twitter.com/taotetek/status/931860786959540224 They are replaced by imczmq/omczmq and are no longer maintained. We put a depreciation notice into the modules a year ago, and now it finally is time to remove them. They do NOT build in any case, except if very old versions of the 0mq ecosystem are used. see also https://github.com/rsyslog/rsyslog/issues/2100 closes https://github.com/rsyslog/rsyslog/issues/2103 - bugfix omusrmsg: don't overwrite previous set _PATH_DEV value Since commit 56ace5e418d149af27586c7c1264fccfbc6badf1, omusrmsg was broken because "memcpy()" is not a suitable substitute for "strncat()" in this context, it is actually replacing the previous added content. Bug: https://bugs.gentoo.org/673004 Closes: https://github.com/rsyslog/rsyslog/issues/3346 Thanks to Thomas D. (whissi) for the patch. - bugfix ossl TLS driver: fixed authentication mode anon authentication mode "anon" was not properly supported in ossl TLS driver; if selected, did still require a full certificate. closes: https://github.com/rsyslog/rsyslog/issues/3037 - bugfix tls subsystem: Receiver hang due to insufficient TLS buffersize. gtls and ossl driver used a default buffersize of 8KiB to store received TLS packets. When tls read returned more than buffersize, the additional buffer was not processed until new data arrived on the socket again. TLS RFCs require up to 16KiB+1 buffer size for a single TLS record. closes https://github.com/rsyslog/rsyslog/issues/3325 - bugfix pmpanngfw: build issue due to non-matching data types in comparison Thanks to Narasimha Datta for the patch. - omfile: work-around for "Bad file descriptor" errors This works-around an issue we can reproduce e.g. via the imtcp-tls-ossl-x509fingerprint.sh test. Here, omfile gets a write error with reason EBADF. So far, I was not able to see an actual coding error. However I traced this down to a multithreaded race on open and close calls. I am very surprised to see this type of issue, as I think the kernel guarantees that it does not happen. Here is what I see in strace -f: openssl accepts a socket: [pid 66386] accept(4, {sa_family=AF_INET, sin_port=htons(59054), sin_addr=inet_addr("127.0.0.1")}, [128->16]) = 10 then, it works a bit with that socket, detects a failure and shuts it down. Sometimes, at the very same instant omfile on another thread tries to open on output file. Then the following happens: [pid 66386] close(10) = 0 [pid 66389] openat(AT_FDCWD, "./rstb_356100_31fa9d20.out.log", O_WRONLY|O_CREAT|O_NOCTTY|O_APPEND|O_CLOEXEC, 0644 [pid 66386] close(10 [pid 66389] <... openat resumed> ) = 10 [pid 66386] <... close resumed> ) = 0 [pid 66386] poll([{fd=4, events=POLLIN}, {fd=5, events=POLLIN}], 2, -1 [pid 66389] write(2, "file './rstb_356100_31fa9d20.out"..., 66file './rstb_356100_31fa9d20.out.log' opened as #10 with mode 420 ) = 66 [pid 66389] ioctl(10, TCGETS, 0x7f59aeb89540) = -1 EBADF (Bad file descriptor) This is **literally** from the log, without deleting or reordering lines. I read it so that there is a race between `open` and `close` where fd 10 is reused, but seemingly closed - resulting in the `EBADF` While it smells like a kernel issue, it may be a well-hidden program bug - if so, one I currently do not find. HOWEVER, this commit works around the issue by reopening the file when we receive EBADF. That's the best thing to do in that case, especially if it really is a kernel bug. Data loss should not occur, as the previous writes succeeded in that case. The backdraw of this work-around is that it only "fixes" omfile. In theory every part of rsyslog can be affected by this issues (queue files, for example). So this is not to be considered a final solution of the root issues (but a big step forward for known problem cases). see also https://github.com/rsyslog/rsyslog/issues/3404 - omhttp bugfix: segfault due to NULL pointer access many thanks to Gerardo Puerta for the patch - omkafka bugfix: segfault when running in debug mode using dynamic topics This should only affect test environments, as debug mode is not suitable for production (and really does not work when running for extended period of time). - testbench bugfix: TLS syslog tests for "anon" mode were broken They did not detect when "anon" mode was not properly supported by the drivers. - test tooling bugfix: correct tcpflood error messages it looks like tcpflood's openssl code stems partly back to tcpdump, at least the error messages indicate this. Thankfully tcpdump is BSD licensed, so this should not be a big issue. Nevertheless, the incorrect program name in error messages needs to be corrected, and this is what this commit does. - tcpflood bugfix: tool did not terminate on certificate error when tcpflood detected a certificate error, it reported an error message but did not abort. This could make errors undetectable during CI runs. also fix tests which did not properly provide CA cert (which than caused the error). - testbench: fix issues with journal testing The configure/Makefile checks were not correct, leading to the build of journal components when not necessary, even if not supported by the platform. Thus lead to invalid build and test failures. - testbench: add tests for "certless" tcp/tls This adds a test to ensure that a client without certificate can connect to a server with certificates. So it is not exactly "certless". The prime intent of this test is to match config suggestions given by log hosting companies (like loggly) and so ensure that we do not accidentally break them. This is especially important as the capability for certless clients was not properly documented and also become forgotten by the rsyslog team. see also https://github.com/rsyslog/rsyslog/issues/3413 - CI - further improve testbench robustness against slow machines - testbench: add tests for parser.EscapeControlCharacterTab global option - testbench: Updated all expired x.509 certs Closes https://github.com/rsyslog/rsyslog/issues/3348 - fix a potential race in CI debug mode which can lead to segfault only when instructed to do so, rsyslog may emit a "final worker thread shutdown" messages. This is usually only enabled in CI and/or other testing. If enabled, the code has a race on the pWti object which can lead to segfault or abort. Only system which explicitly enable this CI aid are affected (running in debug mode alone is NOT sufficient). This is a regression from 8.40.0. - testbench: improve robustness against slow CI, gen. improvements * add an overall timeout value for tests - if running longer, testbench framework tries to FAIL and end test. Note that this is not bullet-proof and not intended to be so. * guard against hanging rsyslog instances via a new imdiag feature to abort after n number of seconds; among others, this guards as against timeout-cancel in CI, which is always pretty hard to diagnose - now we see these errors in test-suite.log * fix a bug in tcp zip test, which actually did not use zip mode * experimentally add debug output to better understand shutdown_when_empty operation; goal is to improve understanding and then remove that code again. * improve shutdown predicate for a couple of tests * made travis run make check with two parallel threads, for which we seem ready now. Nevertheless, it's still experimental and we may roll this back if required. * testbench: disable omprog tests that hang under coverage instrumentation When gcc coverage instrumentation is used, these tests hang. They work with clang coverage instrumentation, but for some reason clang does not give us full reports (at least not when used together with CodeCov.io). We have tried to troubleshoot this for hours and hours - now is time to give up until someone comes up with a bright idea. So we make the affected tests skip themselves when they detect gcc with coverage instrumentation. * testbench: add new test for imfile and logrotate in copytruncate mode * testbench: add new omkafka tests for dynamic topics * travis: do no longer run 0mq tests This often causes trouble when the packages are rebuild by the 0mq project (which happens frequently). We already do intensive testing of the 0mq components in the buildbot infrastructure, where we use dedicated containers. This is reliable, as the containers already contain everything needed and so do not need to reach out to the 0mq package archives. In the light of this, let's save us the trouble of Travis failures. The only downside is that users cannot pre-test with their local Travis when modifying 0mq modules, which is quite acceptable. ------------------------------------------------------------------------------ Version 8.40.0 [v8-stable] 2018-12-11 - mmkubernetes: add support for sslpartialchain for openssl If `"on"`, this will set the OpenSSL certificate store flag `X509_V_FLAG_PARTIAL_CHAIN`. This will allow you to verify the Kubernetes API server cert with only an intermediate CA cert in your local trust store, rather than having to have the entire intermediate CA + root CA chain in your local trust store. See also `man s_client` - the `-partial_chain` flag. This option is only available if rsyslog was built with support for OpenSSL and only if the `X509_V_FLAG_PARTIAL_CHAIN` flag is available. If you attempt to set this parameter on other platforms, you will get an `INFO` level log message. This was done so that you could use the same configuration on different platforms. - openssl driver: improved error messages also fixes misleading wording of some error messages closes https://github.com/rsyslog/rsyslog/issues/3238 - imfile: disable file vs directory error on symlinks The file/directory node-object alignment now ignores symlinks. Previously it reported error on each directory symlink spamming user error logs. Thanks to Jiri Vymazal for the patch. - cleanup: remove no longer needed --enable-rtinst code configure option --enable-rtinst is gone-away since a while, but there were still some supporting code left. It required careful analysis what could actually be removed. This is now done and the code fully cleaned up. This greatly simplifies the code and also makes it better readable for developers which are not deep inside the rsyslog code base. As a positive side effect, we could eliminate mutex calls inside the debug system. This means we are more likely to reproduce race conditions in runs with debugging enabled. closes https://github.com/rsyslog/rsyslog/issues/2211 - bugfix imfile: rsyslog re-sends data for files larger 2GiB This occurs always if and only if - reopenOnTruncate="on" is set - file grows over 2GiB in size Then, the data is continuously re-sent until the file becomes smaller 2GiB (due to truncation) or is deleted. It is a regression introduced by 2d15cbc8221e385c5aa821e4a851d7498ed81850 closes https://github.com/rsyslog/rsyslog/issues/3249 - config: fix segfault in backticks "echo" expansion of undefined variables The bug was introduced in commit abe0434 (config: enhance backticks "echo" capability). The getenv() result passed to strlen() and es_addBuf() may be NULL if the environment variable does not exist, resulting in a segfault. Thanks to Julien Thomas for the patch. fixes https://github.com/rsyslog/rsyslog/issues/3006 - bugfix imsolaris: message timestamps on Solaris On Solaris messages don't have their time directly in the raw body but in a separate log_ctl structure which is currently not used. When message is logged and processed, rsyslogd gives it current time because it ignores the actual one. That means that old messages (e.g. from system reboot) get timestamp of processing instead of the reboot itself (it is not a problem for live logging where now is used anyway). Thanks to Jakub Kulik for the patch. - bugfix build system: "make distcheck" did not work for mysql tests - bugfix build system: don't link liblogging-stdlog when available but not enabled When liblogging-stdlog was available but configure option "--disable-liblogging-stdlog" was set, rsyslog was still linking against liblogging-stdlog. This commit will ensure that rsyslog will only link against liblogging-stdlog when "--enable-liblogging-stdlog" was set. see also: https://bugs.gentoo.org/667836 - bugfix RainerScript: abs() could return negative value, now in range [0..max] Thanks to Harshvardhan Shrivastava for providing the patch - bugfix debug output: date property options output wrongly inside debug logging, the date property options were not all properly converted into strings. Some of the newer ones were invalidly flagged as "UNKNOWN". This is primarily a cosmetic problem and has no effect other than puzzling folks looking at the debug log. - bugfix omhttp: did not compile on some platforms - CI * made mysql-based tests (ommysql and omlibdbi) work inside containers * bugfix testbench: do not execute libgcrypt tests if disabled closes https://github.com/rsyslog/rsyslog/issues/3228 * testbench: grep failed when string starting with "-" was used The search term was mistakenly interpreted as an option. * testbench: support auto-start/-stop of mysqld This is required to run mysql/mariadb tests inside containers. closes https://github.com/rsyslog/rsyslog/issues/3223 * improve bash coding style and fix a some bug in testbench - duplicate diag.sh init call was not detected due to typo - queue-persists test did not work correctly - some general testbench framework improvements issues found be shellcheck, fixes brought up other work to do * testbench: improve journal tests and testbench framework improving both style and reliability of journal tests; along that way also improve testbench framework: - do cleanup on error_exit and skip - explicit skip handler (vs exit 77) this permits us to do better cleanup - new testbench functions for journal-specific functionality reduce code duplication and make things easier to maintain in the future - provide a way to do valgrind and non-valgrind tests with a single test file see also https://github.com/rsyslog/rsyslog/issues/2564 * testbench: improve framework, harden rscript http test - the test now tries to detect unavailable http server, which should not result in test failure - equivalent valgrind test changed to new method, removing code duplication - testbench supports * new exit code 177, which indicates environment error, makes test SKIP but still reports the failure * new exitcode, logurl stats reporting fields * report buildbot builder (if provided) in failure report * testbench: add test for mmjsonparse with unparsable data * testbench: make es-bulk-retry test more reliable We now no longer depend on a fixed 'sleep' command but rather check the output file for what we expect. This is much more robust on slow test machines. We believe this closes the below-mentioned issue. If not, it should be re-opened. closes https://github.com/rsyslog/rsyslog/issues/3104 * testbench: suppress valgrind error caused by pthreads lib finally I give up and honestly think this is a problem in pthreads and not in rsyslog code. See issue below and previous commit for more information. Unfortunately, this will also mask off cases where we do not properly call pthread_join() albeit it is needed. Nevertheless, this bug is causing so much CI grief that it is definitely worth it. closes https://github.com/rsyslog/rsyslog/issues/2902 * testbench: made a couple of (unnamed due to too many) test more robust against slow (CI) machines ------------------------------------------------------------------------------ Version 8.39.0 [v8-stable] 2018-10-30 - imfile: improve truncation detection previously, truncation was only detected at end of file. Especially with busy files that could cause loss of data and possibly also stall imfile reading. The new code now also checks during each read. Obviously, there is some additional overhead associated with that, but this is unavoidable. It still is highly recommended NOT to turn on "reopenOnTruncate" in imfile. Note that there are also inherent reliability issues. There is no way to "fix" these, as they are caused by races between the process(es) who truncate and rsyslog reading the file. But with the new code, the "problem window" should be much smaller and, more importantly, imfile should not stall. see also https://github.com/rsyslog/rsyslog/issues/2659 see also https://github.com/rsyslog/rsyslog/issues/1605 - imjournal: work around journald excessive reloading behavior This is workaround for possible imjournal interaction with systemd where journal invalidate fix is not present. The code tries to detect SD_JOURNAL_INVALIDATE loop and not reload after each call. Thanks to Jiri Vymazal for the patch. - errmsg: remove no longer needed code refactored code (over a long time) so that object-ish style is no longer needed and could now finally be removed; We also refactored the last component (omhttp contrib module) that used the old interface. closes https://github.com/rsyslog/rsyslog/issues/1684 - queue bugfix: invalid error message on queue startup due to some old regression (commit not exactly identified, but for sure a regression, 9 years ago it was correct) an error message is emitted when no .qi file exists on startup of the queue, which is a normal condition. Actually, the code should not have tried to open the .qi file in the first place because it detected that it did not exist. That (necessary) shortcut had been removed a while ago. closes https://github.com/rsyslog/rsyslog/issues/3117 - bugfix imrelp: regression with legacy configuration startup fail Startup of a relp listener failed if legacy configuration was used. caused by commit: 32b71daa8aadb8f16fe0ca2945e54d593f47a824 closes https://github.com/rsyslog/rsyslog/issues/3106 - bugfix imudp: stall of connection and/or potential segfault There was a regression in 493279b790a8cdace8ccbc2c5136985e820dd2fa. This regression may cause stop (or delay) of reception from some systems and may also cause a segfault. Triggering condition is that at least one listener could not be created. Thanks to Jens Låås for the patch. - bugfix gcry crypto driver: small memleak If a crypto key is specified directly via the key="" parameter, the storage for that key is not freed, causing a small memleak. Note that the problem occurs only once per context, so this should not cause real issues. Even more so, as specifying a key directly is meant only for testing purposes and is strongly discouraged for production use. Detected by internal testing, no actual fail case known. - fix potential misaddressing in encryption subsystem could happen if e.g. disk queues were encrypted not seen in practice but caught by testbench test - ksi subsystem changes * enhance debug logging * disable unsafe SHA1 algorithm Thanks to Allan Park for the patch. - bugfix core: regex compile error messages could be incorrect - bugfix core: potential hang on rsyslog termination The root cause was a deadlock during worker startup. This could happen for example when a DA queue needed to persist data during shutdown. Fail condition: * startup request for a new worker * initialization of that worker * immediate detection that the worker can or must shutdown * main thread waiting for worker running state, which it skips, and so the main thread hangs inside a loop closes https://github.com/rsyslog/rsyslog/issues/3094 - bugfix imkafka: system hang when backgrounded imkafka initializes librdkafka too early (before the fork). This leads to hangs in various parts of the system - not only im imkafka but other functions as well (e.g. getaddrinfo() calls). closes https://github.com/rsyslog/rsyslog/issues/3180 - bugfix imfile: file change was not reliably detected A change in the inode was not detected under all circumstances, most importantly not in some logrotate cases. Includes new tests made by Andre Lorbach. They now use the logrotate tool natively to reproduce the issue. closes https://github.com/rsyslog/rsyslog/issues/2659 closes https://github.com/rsyslog/rsyslog/issues/1605 - bugfix imrelp: do not fail build if librelp does not have relpSrvSetLstnAddr closes https://github.com/rsyslog/rsyslog/issues/2938 - bugfix queue subsystem: DA queue did ignore encryption settings closes https://github.com/rsyslog/rsyslog/issues/3066 closes https://github.com/rsyslog/rsyslog/issues/2575 - bugfix KSI: lmsig-ksils12 module skips signing the last block Thanks to Allan Park for the patch. closes https://github.com/rsyslog/rsyslog/issues/3105 - bugfix fmhash: function hash64mod sometimes returned wrong result Thanks to Harshvardhan Shrivastava for providing the patch closes https://github.com/rsyslog/rsyslog/issues/3025 - bugfix core/debug: data written to random fd 2 under some debug settings This happens only during auto-backgrounding, where we cannot any longer access stderr. Whatever is opened with fd2 receives some debug messages. Note that the specific feature is usually turned on only in CI runs. - cleanup: removed no longer needed code Code that was unused for quite a while or did not really belong to the project identified and removed. - overall code cleanup e.g. remove unused code, replace bad bash constructs, etc... - CI: * some small improvements in testbench plumbing e.g. (`cmd` replaced by $(cmd), removed useless use of cat, ...) * testbench: improve plumbing for kafka tests - Removed all sleeps where possible. - Moved all kafka start/stop/download logic into functions. - Moved kafka/zookeeper stop into error_exit and exit_test. - Kafka/Zookeeper cleanup only done on success now. - Kafka/Zookeeper logfiles automatically dumped on error_exit only now. - Added cleanup for Kafka/Zookeeper instances into CI/buildbot_cleanup.sh - added new tests * testbench: fix incompatibility of one omprog test with Python3 Python3 writes to stderr immediately, and this caused the captured output to differ with respect to Python2. Simplified the test to do a single write to stderr. Also a cast to int was needed when calculating 'numRepeats'. closes https://github.com/rsyslog/rsyslog/issues/3030 * testbench: fixed imfile parallel issues - Fixed timing issues in some imfile wildcard/regex tests - Added touch command in imfile wildcard tests to make sure directories exist before files are created in it if IO is under stress. - changed content checking in some tests to use "content_check_with_count" with check timeouts instead of using fixed sleeptimes. * testbench: new basic tests These ensure that for some modules that did not have any tests at all we have at least a minimal coverage (module loads, activates, is able to emit error messages). Of course, further improvements would make much sense. Modules: - ommail - testbench: new tests for disk queue encryption - testbench: improved auto-diagnostics for hanging instance - testbench: hardened kafka test against failing kafka subsystem, not in 100% of the cases, but at least in some that frequently occur - failing tests now report failure status so that we can get stats on unreliable tests - testbench tooling: fix incorrect tcpflood TLS parameter check could lead to segfault when started - bugfix testbench tooling: tcpflood invalid type in calloc (openssl mode) It is unlikely that this has caused a real issue, as long as pointers are all of the same size (what is highly probable). detected by cppcheck via Codacy.com ------------------------------------------------------------------------------ Version 8.38.0 [v8-stable] 2018-09-18 - AIX: make basic modules work again - make rsyslog build on AIX again ... at least for a limited set of default modules - imfile: support for endmsg.regex This adds support for endmsg.regex. It is similar to startmsg.regex except that it matches the line that denotes the end of the message, rather than the start of the next message. This is primarily for container log file use cases such as this: date stdout P start of message date stdout P middle of message date stdout F end of message The `F` means this is the line which contains the final part of the message. The fully assembled message should be `start of message middle of message end of message`. `startmsg.regex="^[^ ]+ stdout F "` will match. Thanks to Richard Megginson for the patch. - imkafka: add parameter "parseHostName" This enables imkafka to parse the hostname from log message. Previously that was not possible. It was most likely a bug, but one that users may count on. The new parameter "ParseHostName" (default is off) controls this behavior. Default is to NOT parse the hostname. Thanks to github user snaix for the contribution. - im[p]tcp: improve error message on connect failure Now a message with the actual OS error is emitted, making things far easier to troubleshoot. - imkafka: implement multithreading support for kafka consumers. Each consumer runs in it's own consumer thread now. New tests have also been added for this. - omelasticsearch: write all header metadata to $.omes for retries Write all of the original request metadata fields to $.omes for the retry, if present. This may include all of the following: _index, _type, _id, _parent, pipeline This is in addition to the fields from the response. If the same field name exists in the request metadata and the response, the field from the request will be used, in order to facilitate retrying the exact same request. Thanks to Richard Megginson for the patch. - core: improve error message on module load fail The error message now lists all dlopen() errors in depth. This is especially useful if the error is due to missing symbols or file format errors. - core/queue: add error message if queue file cannot be accessed When having a disk-assisted queue without permission to write to the specified queue file an error will now be generated. closes https://github.com/rsyslog/rsyslog/issues/323 - imtcp/imudp: new option preservecase for managing the case of FROMHOST value default is left at current behavior see also https://github.com/rsyslog/rsyslog/pull/2774 see also https://bugzilla.redhat.com/show_bug.cgi?id=1309698 - omprog: add feedback timeout and keep-alive feature - Restart the program if it does not respond within timeout. - New setting 'confirmTimeout' (default 10 seconds). - Allow the program to provide keep-alive feedback when a message requires long-running processing. - Improve efficiency when reading feedback line (use buffer). Retry interrupted writes/reads to/from pipe. - New setting 'reportFailures' for reporting error messages from the program. - Report child termination when writing to pipe. - Minor refactor: renamed writePipe function to sendMessage, renamed readPipe to readStatus. Thanks to Joan Sala for contributing this. - omprog: fix forceSingleInstance configuration option The forceSingleInstance option did not work as intended. Even if set multiple instances were spawned. This most probably was a regression from 0453b1670fc34c96d31ee7c9a370f0f5ec24744a The code was broken roughly 3.5yrs ago, so it looks like the issue was little-noticed. This also means that potentially some users may see the bugfix as change of behavior. If so, just remove the option. closes https://github.com/rsyslog/rsyslog/issues/2813 closes https://github.com/rsyslog/rsyslog/issues/2468 Thanks to Joan Sala for contributing this. - imfile: implement file-id, used in state file This ensures that files with the same inodes are not accidentally treated as equal, at least within the limits of the file id hash (see doc for details). We use the siphash reference implementation to generate our non-cryptographic hash. closes https://github.com/rsyslog/rsyslog/issues/2530 closes https://github.com/rsyslog/rsyslog/issues/2231 - imfile: experimental input throttling feature The new input parameter delay.message has been added. It specifies a delay in microseconds after each line read. closes https://github.com/rsyslog/rsyslog/issues/2960 - core: emit TZ warning on startup not on Linux non-container On Linux it seems common that the TZ variable is NOT properly set. There are some concerns that the warning related to rsyslog correcting this confuses users. It also seems that the corrective action rsyslog takes is right, and so there is no hard need to inform users on that. In Linux containers, however, the warning seems to be useful as the timezone setup there seems to be frequently-enough different and rsyslog's corrective action may not be correct. So we now check if we are running under Linux and not within a container. If so, we do not emit the warning. In all other case, we do. This is based on the assumption that other unixoid systems still should have TZ properly set. closes https://github.com/rsyslog/rsyslog/issues/2994 - omkafka: * better debug information * Fixed minor issue in omkafka producing wrong kafka timestamps when msgTimestamp was NULL. * Setting RD_KAFKA_V_KEY(NULL, 0) in rd_kafka_producev now when KEY is not configured. * Fixed minor issue when rsyslog is compiled with --enable-debug and librdkafka is too old. - omfile bugfix: errant error message when dynafile param needed also fixes related message in contributed module omfile-hardened closes https://github.com/rsyslog/rsyslog/issues/2975 Thanks to Frank Bicknell for the patch - omhttp: new contributed module Thanks to Christian Tramnitz for contributing it. Some more info at https://github.com/rsyslog/rsyslog/pull/2782 - mmkubernetes: action fails preparation cycle if kubernetes API ... ... destroys resource during bootup sequence The plugin was not handling 404 Not Found correctly when looking up pods and namespaces. In this case, we assume the pod/namespace was deleted, annotate the record with whatever metadata we have, and cache the fact that the pod/namespace is missing so we don't attempt to look it up again. In addition, the plugin was not handling error 429 Busy correctly. In this case, it should also annotate the record with whatever metadata it has, and _not_ cache anything. By default the plugin will retry every 5 seconds to connect to Kubernetes. This behavior is controlled by the new config param `busyretryinterval`. This commit also adds impstats counters so that admins can view the state of the plugin to see if the lookups are working or are returning errors. The stats are reported per-instance or per-action to facilitate using multiple different actions for different Kubernetes servers. This commit also adds support for client cert auth to Kubernetes via the two new config params `tls.mycert` and `tls.myprivkey`. Thanks to Richard Megginson for the patch. - bugfix pmnormalize/core: several memory leaks, invld property handling - major memory leak which occurred once per message processed So this could lead to OOM. Caused by improper free of json structure - another two major leaks of similar magnitude could occur if "fromhost-ip" and/or "fromhost" properties were set - minor leaks upon termination. these were unproblematic as static and only occurred immediately before shutdown. But they triggered memory debugger errors. - fixed test which did not check for mem leaks albeit it should - core invalid handling of the "fromhost" property, if set via the MsgSetPropsViaJSON() call. This was primarily of concern for pmnormalize and mmexternal, and only if these properties were used by either the rulebase or the external program response. Actually, most of the leaks go back to rsyslog core, but that core functionality was not used by other modules in the same way. But if some other would have used it, the effects would have been the same (so be aware if you wrote custom modules). - bugfix imptcp: fixed pointers for session counting imptcp open, failedopen, and closed pstats counters were assigned the wrong name, thus pstats values did provide a totally wrong picture of what was going on. Thanks to github user jeverakes for the patch. - bugfix omprog: invalid memory access on partial writes to pipe When sending logs to the program, in case of a partial write to the pipe, invalid data was sent, or an invalid memory access could occur. (A partial write can occur if the syscall is interrupted or the pipe is full.) Thanks to Joan Sala for contributing this. - bugfix omprog: rsyslog's environment was not passed to script closes https://github.com/rsyslog/rsyslog/issues/2921 - bugfix omprog: severity of some log messages in waitForChild corrected Log some messages related to child process termination as info/warn instead of error. - bugfix imfile: files which were loaded via symlink were not always followed They were stopped watching after being rotated. closes https://github.com/rsyslog/rsyslog/issues/2229 Thanks to Jiri Vymazal for the patch. - bugfix imfile: potential misaddressing when processing symlinks Fixed parent name when processing symlinks. Detected during code review. There was a garbage byte left before which could cause errors down the road. Thanks to Jiri Vymazal for the patch. - bugfix ommongodb: build issue if mongo-c-driver is not compiled with TLS Let ommongodb module works even if mongo-c-driver is not compiled with SSL support. Thanks to Jérémie Jourdin for the patch. closes https://github.com/rsyslog/rsyslog/issues/2907 - CI: * many changes with the goal to support parallel test execution, e.g. use dynamic ports and file names, changes to testing tools, etc. * kafka tests re-enabled, as they should now no longer be racy. However, this has yet to be proven in practice. * upgrading kafka server version to current * Fixed server configuration issues holding the kafka tests back from working * Fixed some config issues in all sndrcv kafka tests. * Generating dynamically kafka topics now for each kafka test. * Reenabled kafka_multi test which runs a test on 3 kafka/zookeeper instances ------------------------------------------------------------------------------ Version 8.37.0 [v8-stable] 2018-08-07 - build system: add --enable-default-tests ./configure option This permits to control the "default tests" in testbench runs. These are those tests that do not need a special configure option. There are some situations where we really want to turn them of so that we can run tests only for a specific component (e.g. ElasticSearch). This commit also removes the --enable-testbench[12] configure switches, which were introduced just to work-around travis runtime restrictions. With the new CI setup and new options we could reduce the Travis runtime dramatically and so we do not need them any longer. - overall adaptation to gcc 8 which emits new warnings - fix some build warnings on 32bit systems, namely armhf architecture - ommail change of behavior: "enable.body" default now "on" This was always documented to be "on", but actually was "off". Usually, we fix the doc, but after long discussion the agreement was that in this specific case it was actually better to change the default. see also: https://github.com/rsyslog/rsyslog/pull/2791 - core/omfile: race in async writing mode mutex was not properly locked at all times when the async writing buffer was flushed Thanks to Radovan Sroka for the patch. - core: provide a somewhat better default action name We now include the module name (e.g. "omelasticsearch" or "builtin:omfile") as part of the name. This is still not perfect, but hopefully a bit easier to grasp. see also https://github.com/rsyslog/rsyslog/issues/342 - new global() parameter "abortOnUncleanConfig" This provides a new-style alternative to $AbortOnUncleanConfig. closes https://github.com/rsyslog/rsyslog/issues/2744 - tcpflood no longer links with -lgrcypt as this is no longer necessary for GnuTLS Thanks to Michael Biebl for the patch. - imjournal: add journal-specific impstats counters these provide some additional insight into journal operations Thanks to Abdul Waheed for the patch. - imjournal: fixed startup on missing state file When starting rsyslog with imjournal for first time it outputs an error and plugin does not run because no state file exists yet. Now it skips the loading and creates state file on first persist. Thanks to Jiri Vymazal for the patch. - imjournal: fetching cursor on readJournal() and simplified pollJournal() Fetching journal cursor in persistJournal could cause us to save invalid cursor leading to duplicating messages further on, when new WorkAroundJournalBug option is set we are saving it on each readJournal() where we now that the state is good. pollJournal() is now cleaner and faster, correctly handles INVALIDATE status from journald and is able to continue polling after journal flush. Also reduced POLL_TIMEOUT a bit as it caused rsyslog to exit with error in corner cases for some ppc when left at full second. re-factored imjournal CI tests with journal_print tool to have more detailed error reporting. Thanks to Jiri Vymazal for the patch. - config: enhance backticks "echo" capability This is now more along the lines of what bash does. We now support multiple environment variable expansions as well as constant text between them. example: env SOMEPATH is set to "/var/log/custompath" config is: param=`echo $SOMEPATH/myfile` param than is expanded to "/var/log/custompath/myfile" among others, this is also needed inside the testbench to properly support "make distcheck". Note: testbench tests follows via separate commit. There will be no special test, as the testbench itself requires the functionality at several places, so the coverage will be very good even without a dedicated test. - imrelp: add support for setting address to bind to (#894) This adds a new optional `address` parameter to `imrelp` inputs in order to specify an address to bind to. Based on support added by rsyslog/librelp@96eb5be Thanks to Simon Wachter for the patch. - omrelp: permit all authmodes; updated tests omrelp for some time limited authentication modes to those that were known. While this was OK, it prevented the easy introduction of new auth modes into librel. This has now been changed; omrelp now checks the validity of the authmode directly via librelp by doing some librelp calls upon processing the configuration. Also, some tests have been updated to check this feature and also ensure that the new librelp mode "certvalid" works (if it is available). - regexp.c: reduce lock contention when using glibc. When using glibc, we enable per-thread regex to avoid lock contention. See: - https://github.com/rsyslog/rsyslog/issues/2759 - https://github.com/rsyslog/rsyslog/pull/2786 - https://sourceware.org/bugzilla/show_bug.cgi?id=11159 This should not affect BSD as they don't seem to take a lock in regexec. NOTE: it is assumed that we can craft an even better solution than this patch, but it improves the situation and we do not have time to craft more. So we decided to merge. For details see https://github.com/rsyslog/rsyslog/pull/2786 - mmpstrucdata: better error message, support $! in var names see also https://github.com/rsyslog/rsyslog/issues/1262#issuecomment-404773495 - more explicit error msg with message modification mod on queue Message modification modules do not work if used with a non-direct queue. We now make this more explicit in the config parsing error message. closes https://github.com/rsyslog/rsyslog/issues/1323 - omrabbitmq: improve high-load performance A different pthread mutex is created for each connection (action) instead of a single one shared by all connections. This will improve performance when using multiple concurrent connections to a single (or multiple) RabbitMQ instance(s) (e.g. for load balancing) Thanks to github user micoq for contributing the patch. - imudp: replace select() calls by poll() This improves reliability in extreme cases (more than 1024 fds open when imudp begins to listen) and potentially improves performance a little. - ommysql: support mysql unix domain socket: via action(.. socket="/tmp/mysqld.sock" ..) Thanks to JoungKyun Kim for contributing this. - impstats: emit warning if log.syslog="off" and ruleset name given With this config, "ruleset" is silently ignored, what probably is not obvious to a user. closes https://github.com/rsyslog/rsyslog/issues/2821 - build system cleanup: remove no longer needed --enable-memcheck This was used for a very old testing capability, no longer functional but causes build to fail if enabled. Replaced by ASAN/valgrind. Issue detected while testing some other CI settings. - tools: Updated python based statslog analyzer sample scripts - developer tools: make devcontainer tool more developer friendly slight improvement for easy interactive use - enable better testing via "make distcheck" Also a couple of changes to testbench worth mentioning: * use cp -f to ensure files can be overwritten in VBUILD * fix issue of missing include test file in EXTRA_DIST * new suppressions * testbench: try to use local system dependency cache avoid going to Internet repos if not absolutely necessary. For development containers, they should be pre-populated with the important dependencies. * do not enable libfaketime if ASAN is selected unfortunately, libfaketime does not work in that case Note: for modules with non-standard dependencies (e.g. databases), "make distcheck" only enables what on the original ./configure line was enabled. This is done in order to ensure that "distcheck" adapts to what is actually available on the system in question. Rsyslog's own CI system installs the maximum set of possible dependencies and so tries the maximum set "make distcheck" can support on a platform. see also https://github.com/rsyslog/rsyslog/issues/174 - add new global config parameter "inputs.timeout.shutdown" - omusrmsg: do not fall back to max username length of 8 This happens if utmp.h and friends are not available and stems back to the original syslogd. Nowadas, 32 is more appropriate and now being used in that (now very unlikely) case. The detection logic for UT_NAMESIZE has also been streamlined. closes https://github.com/rsyslog/rsyslog/issues/2834 - bugfix build system: fix race in parallel builds If libgcry.la is built later than lmcry_gcry.la, there is a failure: [snip] |../aarch64-wrs-linux-libtool --tag=CC --mode=link aarch64-wrs-linux-gcc -o lmcry_gcry.la lmcry_gcry_la-lmcry_gcry.lo libgcry.la -lgcrypt |aarch64-wrs-linux-libtool: error: cannot find the library 'libgcry.la' or unhandled argument 'libgcry.la' |Makefile:1049: recipe for target 'lmcry_gcry.la' failed |make[2]: *** [lmcry_gcry.la] Error 1 [snip] The LIBADD of lmcry_gcry.la contains libgcry.la, we should also add libgcry.la to lmcry_gcry.la's DEPENDENCIES. Thanks to Hongxu Jia for the patch. - bugfix imfile: memory leak upon shutdown (cosmetic) When rsyslog shuts down and imfile is inside a change polling loop, it does not properly free memory returned by glob(). This is a cosmetic bug as the process terminates within the next few milliseconds. However, it causes memory analyzer reports and thus makes CI fail. - bugfix core msg: potential deadlock (and rsyslog hang) can happen e.g. with headerless messages when app-name property is used closes https://github.com/rsyslog/rsyslog/issues/3135 - bugfix core: do not abort startup on problems setting scheduling policy rsyslog creates a default scheduling policy on startup. This code invalidly used CHKiRet (our exception handler) to check pthreads return codes, what this macro cannot do. This lead to hard to diagnose startup problems in cases where there were problems setting the scheduling defaults (e.g. when rsyslog is set to run at idle priority). Even more so, this blocked startup altogether, which is not the right thing to do. Actually, this can be considered a regression from commit 7742b21. That commit was 8 years ago, so in general this cannot be a big issues ;-) The code now emits proper error messages (to stderr, as at this point no other output is available as it is during the initial state of rsyslog initialization) and continues the startup. closes https://github.com/rsyslog/rsyslog/issues/2855 - bugfix core: input shutdown timeout not properly applied The timeout could be reduced by mutex wait time, which was not the intended behavior and could lead the the input thread being cancelled while it would have been perfectly legal to shut it down cleanly. Noticed during working on the CI system. May explain some testbench instability and may have caused trouble with state files (not) properly being written by inputs. - bugfix config optimizer: error in constant folding did not work properly if a string and a number were to be folded. Detected by gcc 8. - build: fix improper function casts no real issue, but generated warnings under gcc 8 and thus broke CI - bugfix omlibdbi: fix potential small memory leak detected by clang static analyzer - bugfix ommysql: unsafe use of strncpy() also now reports oversize names as user error vs. silent truncation overly long names only could affect config load phase - bugfix omhttpfs: fix insecure usage if strncmp() consequences not evaluated as this is a contributed module. Detected by gcc 8. - bugfix mmgrok: cosmetic build issue - compiler warnings caused build under gcc 7 to fail with warning - bugfix mmkubernetes: stops working with non-kubernetes container names When mmkubernetes encounters a record with a CONTAINER_NAME field, but the value does not match the rulebase, mmkubernetes returns an error, and mmkubernetes does not do any further processing of any records. The fix is to check the return value of ln_normalize to see if it is a "hard" error or a "does not match" error. This also adds a test for pod names with dots in them. Thanks to Richard Megginson for the patch. - bugfix mmkubernetes: potential NULL pointer access If token file could not be opened, fclose() was passed a NULL pointer. Thanks to github user jvymazal for finding and Richard Megginson for fixing the issue. - bugfix omsnmp: invalid traptype was not detected this could leave config errors unreported and cause unexpected behavior - bugfix mmkubernetes: default rules use container_name_and_id also include rulebase files in dist and fix rule so that dot inside pod name is supported. Thanks to Richard Megginson for fixing the issue. - bugfix omelasticsearch: build regression Commit 6d4635efbb13907bf651b1a6e5a545effe84d9d9 introduced some compile problems, which were only detected on CentOS6, which unfortunately did not compile omelasticsearch during CI runs - bugfix ommongodb: do not force MongoDB to use "PLAIN" auth mechanism ... which also seems not to be handled by current MongoDB. Remove ?authMechanism=PLAIN URI part to let the mongo library chooses the default mechanism. One can force a specific authentication mechanism by adding ?authMechanism=XXX into the uristr argument of the module Thanks to Jérémie Jourdin for the fix. closes https://github.com/rsyslog/rsyslog/issues/2753 - build system: do not disable tests via --disable-liblogging-stdlog This setting controlled both the actual rsyslog functionality as well as some testbench tests, which use liblogging-stdlog to provide some specific functionality. This meant those tests were not run since changing the default. Now untangling the dependency. - CI: * most test refactored to use newer testbench plumbing while no functional change, this permits further enhancements * ElasticSearch startup timeout in tests increased to care for slower test systems * imjournal: fixed tests to actually test plugin functionality Thanks to Jiri Vymazal for the patch. * new test for gnutls priority string in librelp Thanks to github user jvymazal for the patch * testbench: relax hanging instance detection This does not work reliably if multiple instances of rsyslog builds run on a single machine. We need to improve, but this commit makes conflict less likely and provides some diagnostic info to help guide us towards a final solution. * testbench: fix tests that look awfully wrong These tests indicated they terminate rsyslog forcefully without draining the queues, but then checked if they were drained (all messages processed). That does not make sense, and we cannot envision why this was written the first place. So we assume some copy&paste problem was the root of that. * testbench: refactor tests which used "nettester" tool Some old tests are carried out via the nettester tool. This was our initial shot at a testbench a couple of years ago. While it worked back then, the testbench framework has been much enhanced. These old tests are nowadays very hard to handle, as they miss debug support etc. So it is time to refactor them to new style. As a side-activity, the testbench plumbing has been enhanced to support some operations commonly needed by these tests. Contrary to pre-existing plumbing, these new operations are now crafted using bash functions, which we consider superior to the current method. So this is also the start of converting the older-style functionality into bash functions. We just did this now because it was required and we entangled it into the test refactoring because it was really needed. Else we had to write old-style operations and convert them in another commit, which would have been a waste of time. Special thanks to Pascal Withopf for the initial step of taking old tests and putting config as well as test data together into the refactored tests, on which Rainer Gerhards than could build to create the new tests and update testbench plumbing. * testbench: ensure uxsock test leaves no dangling listener instances ..in case the test aborts. We utilize the timeout utility for now to prevent this. * testbench: make port for imdiag dynamic This is prep work to support parallel test runs ------------------------------------------------------------------------------ Version 8.36.0 [v8-stable] 2018-06-26 - build system change: Liblogging-stdlog was introduced to provide a broader ability to send rsyslog internal logs to different sources. However, most distros did not pick up that capability and so instead we do a regular syslog() call. We assume that the actual functionality is never used in practice, so we plan to retire it. That makes building rsyslog from source easier. The plan is to disable use of liblogging-stdlog by default during configure. So users (and distros!) can still opt-in to have it enabled if they desire. A couple of releases later, we want to completely remove the functionality, except if there has desire been shown in the meantime which justifies to keep liblogging-stdlog. This version disabled liblogging-stdlog by default. We now also emit a warning message ("liblogging-stdlog will go away") so that users know what is going on and my react. closes https://github.com/rsyslog/rsyslog/issues/2705 see also https://github.com/rsyslog/rsyslog/issues/2706 - add openssl driver alongside GnuTLS one for TLS communication The openssl driver is currently experimental. It will become the new preferred driver as it permits us to provide much better end-user error message than we could provide with GnuTLS. It is also less picky with certificate files and provides specific error messages if there are certificate problems. closes: https://github.com/rsyslog/rsyslog/issues/1390 closes: https://github.com/rsyslog/rsyslog/issues/1840 closes: https://github.com/rsyslog/rsyslog/issues/1352 closes: https://github.com/rsyslog/rsyslog/issues/1702 closes: https://github.com/rsyslog/rsyslog/issues/2547 - GnuTLS TLS driver: support intermediate certificates this is necessary for certificate chains Thanks to Arne Nordmark for providing the patch. closes https://github.com/rsyslog/rsyslog/issues/2762 - omelasticsearch: write op types; bulk rejection retries * Add support for a 'create' write operation type in addition to the default 'index'. Using create allows specifying a unique id for each record, and allows duplicate document detection. * Add support for checking each record returned in a bulk index request response. Allow specifying a ruleset to send each failed record to. Add a local variable `omes` which contains the information in the error response, so that users can control how to handle responses e.g. retry, or send to an error file. * Add support for response stats - count successes, duplicates, and different types of failures. * Add testing for bulk index rejections. Thanks to Richard Megginson for the patch. - lookup tables: reload message now with "info" severity (was "error") thanks to Adam Chalkley for the patch - imptcp: add support for regex-based framing for complex multi-line messages (XML in particular), the multiLine method does not work well. We now have a capability to specify via a regex when a frame starts (and the previous thus ends). adds imptcp input parameter "framing.delimiter.regex" - imjournal: add statistics counter following statistics counter are now supported by imjournal - submitted = total number of messages submitted for processing closes https://github.com/rsyslog/rsyslog/issues/2549 - config: permit 4-digit file creation modes permit 4-digit file creation modes (actually 5 with the leading zero) so that the setgid bit can also be set (and anything else on that position. closes https://github.com/rsyslog/rsyslog/issues/1092 - ommongodb: add possibility to ignore some insertion error code new config parameter "allowed_error_codes", which will be ignored if they happen. For example, 11000 DuplicateKey in case of collection containing a unique field. Thanks to Hugo Soszynski for contributing this work - omprog: simplify 'plugin-with-feedback.py' example Make the skeleton easier to understand by removing transaction support. Also, transaction failures did not work as explained in the skeleton, because of issue #2420. In the future, a 'plugin-with-transactions.py' example can be added, ideally once the issue is solved. Thanks to Joan Sala for contributing this. - core: misaddressing when writing disk queue files when writing disk queue files during shutdown, access to freed memory can occur under these circumstances: - action A is processing data, but could not complete it most importantly, the current in-process batch needs not to be totally completed. Most probable cause for this scenario is a suspended action in retry mode. - action A is called from a ruleset RA which - does not have a queue assigned - where RA is called from a ruleset RO which is bound to the input from which the message originated - RO must be defined before RA inside the expanded config - Disk queues (or the disk part of a DA queue) must be utilized by A When re-injecting the unprocessed messages from A into the disk queue, the name of ruleset RO is accessed (for persisting to disk). However, RO is already destructed at this point in time. The patch changes the shutdown processing of rulesets, so that all shutdown processing is done before any ruleset data is destructed. This ensures that all data items which potentially need to be accessed remain valid as long as some part may potentially try to access them. This follows a the approach used in https://github.com/rsyslog/rsyslog/pull/1857 where obviously that part of the problem was not noticed. see also https://github.com/rsyslog/rsyslog/issues/1122 closes https://github.com/rsyslog/rsyslog/issues/2742 - core: fix message loss on target unavailability during shutdown Triggering condition: - action queue in disk mode (or DA) - batch is being processed by failed action in retry mode - rsyslog is shut down without resuming action In these cases messages may be lost by not properly writing them back to the disk queue. closes https://github.com/rsyslog/rsyslog/issues/2760 - imrelp bugfix: error message "librelp too old" is always emitted ... ... even if librelp is current. The condition check was actually missing. This commit adds it. closes https://github.com/rsyslog/rsyslog/issues/2712 - imrelp: segfault on startup when cert without priv key is configured closes https://github.com/rsyslog/rsyslog/issues/2747 - omrelp bugfix: segfault on first message sent when authmode was wrong A segfault could occur if the authmode was configured to an invalid value. This is now caught during config processing and an error is reported. closes https://github.com/rsyslog/rsyslog/issues/2743 - imfile bugfix: double-free on module shutdown detected by code review, not seen in practice - imfile/core bugfix: potential misaddressing in string copy routine This can be exposed via imfile, as follows: - use a regex to process multiline messages - configure timeouts - make sure imfile reads a partial message - wait so that at least one timeout occurs - add the message termination sequence This leads to a misaddressing, which may have no obvious effects potentially up to a segfault. closes https://github.com/rsyslog/rsyslog/issues/2661 - imfile bugfix: if freshStartTail is set some initial file lines missing When the option is set and a new file is created after rsyslog startup, freshStartTail is also applied to it. That is data written quickly to it (before rsyslog can process it) will potentially be discarded. If so, and how much, depends on the timing between rsyslog and the logging process. This problem is most likely to be seen in polling mode, where a relatively long time may be required for rsyslog to find the new file. This is changed so that now freshStartTail only applies to files that are already-existing during rsyslog's initial processing of the file monitors. HOWEVER, depending on the number and location (network?) of existing files, this initial startup processing may take some time as well. If another process creates a new file at exactly the time of startup processing and writes data to it, rsyslog might detect this file and it's data as prexisting and may skip it. This race is inevitable. So when freshStartTail is used, some risk of data loss exists. The same holds true if between the last shutdown of rsyslog and its restart log file content has been added. This is no rsyslog bug if it occurs. As such, the rsyslog team advises against activating the freshStartTail option. closes https://github.com/rsyslog/rsyslog/issues/2464 - core: fix undefined behavior (unsigned computation may lead to value < 0) This was detected by LLVM UBSAN. On some platforms re-setting the rawmsg inside the message object could lead to invalid computation due to the fact the the computation was carried out as unsigned and only then converted to integer. No known problem in practice. - CI/QA: - improved Elasticsearch tests so they can now be run without system- installed ES service; also enables us to specify specific ES versions and should now make the tests executable inside a container ------------------------------------------------------------------------------ Version 8.35.0 [v8-stable] 2018-05-15 - imptcp: add ability to configure socket backlog this can be useful under heavy load. For a detailed discussion see https://github.com/rsyslog/rsyslog/pull/2561 Thanks to Maxime Graff for implementing this. - omfile: do not permit filename that only consists of whitespace - fmhash: new hash function module implements hash32() and hash64() functions Thanks to Harshvardhan Shrivastava for implementing these - some better error messages - imklog: add ratelimiting capability On Linux kernel logs are ratelimited only for messages using printk_ratelimit(). Some logs do not use this facility, so we ratelimit kernel ourselves. Thanks to Berend De Schouwer for the patch. - omkafka: added impstats counters for librdkafka returned statistics Adds: * statscallback counters * librdkafka failure and error counters * acked message counter Thanks to Abdul Waheed for implementing this. - imudp * use rsyslog message rate-limiter instead of home-grown one imudp introduced it's own (feature-limited) rate-limiting capability for message on disallowed senders before we had central rate-limiters inside rsyslog. Also, that code evolved from running on a single thread to running on multiple threads, which introduced data races and so made unreliable. Now we removed the old rate-limiting capability and depend on the system rate limiter for internal rsyslog messages. closes https://github.com/rsyslog/rsyslog/issues/2467 * add stats counter "disallowed" counts the number of messages discarded due to being received from disallowed senders see also https://github.com/rsyslog/rsyslog/issues/2467 - imrelp: add parameter "oversizeMode" Permits to instruct librelp how to handle oversize messages. The new default is to truncate messages. Previously, the connection was aborted, what often lead to stuck messages at the sender side. Now, there are three options passed down to librelp: * abort - same behavior as previously, connection is aborted on error * truncate - do not abort but instead truncate oversize message to configured max size * accept - accept all oversize messages (note: this can cause security issues, see doc for details) see also https://github.com/rsyslog/rsyslog/pull/1525#issuecomment-384179393 see also https://github.com/rsyslog/rsyslog/issues/2190 closes https://github.com/rsyslog/rsyslog/issues/2633 closes https://github.com/rsyslog/rsyslog/issues/1741 closes https://github.com/rsyslog/rsyslog/issues/1782 closes https://github.com/rsyslog/rsyslog/issues/2496 - core: consistent handling of oversize input messages In the community we frequently discuss handling of oversize messages. David Lang rightfully suggested to create a central capability inside rsyslog core to handle them. We need to make a distinction between input and output messages. Also, input messages frequently need to have some size restrictions done at a lower layer (e.g. protocol layer) for security reasons. Nevertheless, we should have a central capability * for cases where it need not be handled at a lower level * as a safeguard when a module invalidly emits it (imfile is an example, see https://github.com/rsyslog/rsyslog/pull/2632 for a try to fix it on the module level - we will replace that with the new capability described here). The central capability works on message submission, and so cannot be circumvented. It has these capabilities: * oversize message handling modes: - truncate message - split message this is of questionable use, but also often requested. In that mode, the oversize message content is split into multiple messages. Usually, this ends up with message segments where all but the first is lost anyhow as the regular filter rules do not match the other fragments. As it is requested, we still implemented it. - accept message as is, even if oversize This may be required for some cases. Most importantly, it makes quite some sense when writing messages to file, where oversize does not matter (accept from a DoS PoV). * report message to a special "oversize message log file" (not via the regular engine, as that would obviously cause another oversize message) This commit, as the title says, handles oversize INPUT messages. see also https://github.com/rsyslog/rsyslog/issues/2190 closes https://github.com/rsyslog/rsyslog/issues/2681 closes https://github.com/rsyslog/rsyslog/issues/498 Note: this commit adds global parameters: * "oversizemsg.errorfile", is used to specify the location of the oversize message log file. * "oversizemsg.report", is used to control if an error shall be reported when an oversize message is seen. The default it "on". * add global parameter "oversizemsg.input.mode" is used to specify the mode with which oversized messages will be handled. - omfwd: add support for bind-to-address for UDP To allow the same source address to be used regardless of the egress interface taken, an option is added for an address to bind the datagram socket to. Similarly to imudp, it is necessary to add an ipfreebind option which is set by default, so as to avoid an excess of errors at startup before the network interface has come up. This enhancement allows a usecase on networking devices, by which a source interface that is typically a loopback is specified, on which an address to bind to is configured. This is so that the same source address is used for all packets from rsyslog. Thanks to Mike Manning for the patch. - template systemd service file proposes higher permitted file handle limit Especially on busy systems the default are too low. Please keep in mind that on a very busy system even the now-proposed setting may be too low. Thanks to github user jvymazal for the patch. - imuxsock: replace select() call by poll() While extremely unlikely, imuxsock could abort if a file descriptor > 1024 was received during the startup phase (never occurred in practice, but theoretically could if imfile monitored a large number of files and were loaded before imuxsock - and maybe other strange cases). see also https://github.com/rsyslog/rsyslog/issues/2615 - nsdsel_ptcp: replace select() by poll() This removes us of problems with fds > 1024. The performance will probably also increase in most cases. Note this is not a replacement for the epoll drivers, but a general stability improvement when epoll() is not available for some reason. see also https://github.com/rsyslog/rsyslog/issues/2615 closes https://github.com/rsyslog/rsyslog/issues/1728 closes https://github.com/rsyslog/rsyslog/issues/1459 - omprog: refactor tests, fix child closing issues Refactor omprog tests. Fix sync issues in these tests by using the feedback mode (confirmMessages=on) to synchronize the test with the external program. Closes #2403 (I hope) Fix omprog not properly closing child process when signalOnClose=on. Needed for the new tests. Closes #2599 Fix omprog not waiting for the child process to terminate when signalOnClose=off. Needed for the new tests. Closes #2600 Close all fds before executing the child even when valgrind is enabled (--enable-valgrind). Needed for the new tests. Fix memory leak when the xxxTransactionMark parameters were used. Thanks to Joan Sala for the patch. - core: config optimizer did not handle call_indirect This also caused the emission of an "internal error" error message closes https://github.com/rsyslog/rsyslog/issues/2665 - debug support: add capability to print testbench-specific timeout reports done by setting RSYSLOG_DEBUG_TIMEOUTS_TO_STDERR to "on" this is by default activated inside the testbench - mmgrok: fix potential segfault The modules used strtok(), which is not thread-safe. So it will potentially segfault when multiple instances are spawned (what e.g. happens on busy systems). This patch replaces strtok() with its thread-safe counterpart strtok_r(). see also https://github.com/rsyslog/rsyslog/issues/1359 - imrelp bugfix: maxDataSize could be set lower than maxMessageSize maxDataSize specifies the length which will still be accepted It previously could be set to any value, including values lower than the configured rsyslog max message size, which makes no sense. Now this is checked an error message is emitted if the size is set too low. - build system bugfix: build broken if liblogging-stdlog installed in custom path Thanks to Dirk Hörner for the patch. - core bugfix: segfault on queue shutdown if a ruleset queue is in direct mode, a segfault can occur during rsyslog shutdown. The root cause is that a direct queue does not have an associated worker thread pool, but the ruleset destructor does not anticipate that and tries to destruct the worker thread pool. It needs to do this itself, as otherwise we get a race between rulesets on shutdown. This was a regression from https://github.com/rsyslog/rsyslog/commit/3fbd901b3e6300010 closes https://github.com/rsyslog/rsyslog/issues/2480 - imfile bugfix: statefiles contain invalid JSON When imfile rewrites state files, it does not truncate previous content. If the new content is smaller than the existing one, the existing part will not be overwritten, resulting in invalid json. That in turn can lead to some other failures. closes https://github.com/rsyslog/rsyslog/issues/2662 - omfile bugfix: segfault if empty filename was given closes https://github.com/rsyslog/rsyslog/issues/2417 - fix build issues when atomic operations are not present for details, see https://github.com/rsyslog/rsyslog/pull/2604 - lmsig_ksils12 bugfix: build and static analyzer issues The module had a couple of problems building as well as some potential errors detected by clang static analyzer. These have been fixed. Thanks to Allan Park for the patch. closes https://github.com/rsyslog/rsyslog/issues/2517 - impstats bugfix: segfault if bound to non-existing ruleset segfault happens during shutdown; up until unload of impstats, rsyslog works correctly, except that no pstats are emitted. This can be considered to be expected, because the error message indicates the default ruleset is used instead. This is what now actually happens. closes https://github.com/rsyslog/rsyslog/issues/2645 - mmjsonparse bugfix: invalid container name was not detected in debug builds, this will trigger an assertion. In production builds, an rsyslog internal error is logged, but rsyslog continues to run. closes https://github.com/rsyslog/rsyslog/issues/2584 - mmkubernetes bugfixes: fix lnrules, add defaults, add test - Fix lnrules for CONTAINER_NAME - Add pkg check for lognorm >= 2.0.3 so we can set the macro to enable ln_loadSamplesFromString - Add some reasonable default values for parameters, such as kubernetesurl https://kubernetes.default.svc.cluster.local:443 - Clean up sample.conf configuration file Thanks to Richard Megginson for the patch set. - build system bugfix: --enable-atomic-operations did not work closes https://github.com/rsyslog/rsyslog/pull/2604 - bugfix: rsyslog aborts on startup when specific config errors are made The following errors must be made in rsyslog.conf: * no action present * a call statement is used on an undefined ruleset In this case, rsyslog emits an error message on the missing actions and then segfaults. Depending on memory layout, it may also continue to run but do nothing except accepting messages as no action is configured. This patch make rsyslog properly terminate after the error message. It is a change in behavior, but there really is no reason why a defunct instance should be kept running. closes https://github.com/rsyslog/rsyslog/issues/2399 - build system: remove no longer needed --enable-libcurl configure switch The --enable-libcurl switch was added to be able to disable libcurl functionality inside the rsyslog core, see 46f4f43. As libcurl is no longer used inside the core (due to introducing function modules), --enable-libcurl needs to be removed. closes https://github.com/rsyslog/rsyslog/issues/2628 - QA/CI * fixed races in some tests; root cause was that default enq timeout was too low - we may also see in the future that other tests also need adjustment (note that this is not a code problem but rather slow CI environments, so increasing the timeout to get to a stable test state is the absolutely correct thing to do) * enabled some additional useful compiler warnings * new test for diskqueue hitting configured disk space limit * new tests for omfile * added tests for mmkubernetes * added tests for some script functions that were missing them * made far more test compatible with FreeBSD, so that we now have fuller coverage there ------------------------------------------------------------------------------ Version 8.34.0 [v8-stable] 2018-04-03 - mmkubernetes: new module Thanks to Richard Megginson and Peter Portante for contributing the module. - rsyslog script: introduce loadable function modules rsyslog scripting can now also be extended via loadable modules - they provides functions (just like loadable input, output, ... modules) see also http://jan.gerhards.net/2018/03/loadable-rainerscript-functions.html - imfile: large refactoring of complete module This commit greatly refactors imfile internal workings. It changes the handling of inotify, FEN, and polling modes. Mostly unchanged is the processing of the way a file is read and state files are kept. This is about a 50% rewrite of the module. Polling, inotify, and FEN modes now use greatly unified code. Some differences still exists and may be changed with further commits. The internal handling of wildcards and file detection has been completely re-written from scratch. For example, previously when multi-level wildcards were used these were not reliably detected. The code also now provides much of the same functionality in all modes, most importantly wildcards are now also supported in polling mode. The refactoring sets ground for further enhancements and smaller refactorings. This commit provides the same feature set that imfile had previously and all existing CI tests pass, as do some newly created tests. Some specific changes: - bugfix: module parameter "sortfiles" ignored This parameter only works in Solaris FEN mode, but is otherwise ignored. Most importantly it is ignored under Linux. fixes https://github.com/rsyslog/rsyslog/issues/2528 - bugfix: imfile did not pick up all files when not present at startup fixes https://github.com/rsyslog/rsyslog/issues/2241 fixes https://github.com/rsyslog/rsyslog/issues/2230 fixes https://github.com/rsyslog/rsyslog/issues/2354 fixes https://github.com/rsyslog/rsyslog/issues/1716 - bugfix: directories only support "*" wildcard, no others fixes https://github.com/rsyslog/rsyslog/issues/2303 - bugfix: parameter "sortfiles" did only work in FEN mode fixes https://github.com/rsyslog/rsyslog/issues/2528 - provides the ability to dynamically add and remove files via multi-level wildcards see also https://github.com/rsyslog/rsyslog/issues/1280 - the state file name currently has been changed to inode number This will further be worked on in upcoming PRs see also https://github.com/rsyslog/rsyslog/issues/2231 - some enhancements were also done to CI tests, most importantly they were made more compatible with BSD Note that most of the mentioned bug fixes cannot be applied to older versions, as they fix design issues which are solved by the refactoring. Thus there are not separate commits for them. There are probably also a number of different issues fixed, which have not yet been full confirmed. Especially anyone having troubles with imfile and wildcards will benefit from the refactoring. closes https://github.com/rsyslog/rsyslog/issues/2359 - omelasticsearch: add support for CA cert, client cert auth This allows omelasticsearch to perform client cert based authentication to Elasticsearch. adds parameters: tls.cacert, tls.mycert, tls.myprivkey Thanks to Richard Megginson for the patch. - omfile-hardening: new contributed module for "omfile hardened operations" This extends omfile with features considered useful for hardening. Comes at the expense of performance loss and changed semantics. Thanks to Mikko Kortelainen for contributing this work. - stream/bugfix: memory leak on stream open if filename as already generated this can happen if imfile reads a state file. On each open, memory for the file name can be lost. We detected this while working on imfile refactoring, so there is no related bug report. No specific test has been crafted, as the refactored imfile tests catch it (as soon as they are merged). - bugfix/omkafka: did not build on platforms without atomic operations Thanks to github user bruce87en for the patch - bugfix/core/ratelimiting: SystemLogRateLimitBurst was limited to 65535 rsyslog uses unsigned short for configuration setting SystemLogRateLimitBurst. Being just 16 bits, unsigned short cannot hold values bigger than 65535. in a practical setting rsyslog misbehaved with SystemLogRateLimitBurst being bigger than 65535. Thanks to github user KaleviKolttonen for the patch. - bugfix imfile: memory leak in readMode 0 closes https://github.com/rsyslog/rsyslog/issues/2421 - bugfix omfile: some error messages had parameters in wrong order which made the message look strange, but still readable Thanks to Hans Rakers for the patch. - bugfix omprog: file handle leak There was a fd leak in the feedback feature added in v8.31.0 (github PR #1753). The leak occurred when omprog was used with the confirmMessages=on setting and no output setting. One fd was leaked every time the external program was started. Thanks to Joan Sala for the patch. - bugfix imuxsock: data alignment problems gcc did rightly complain that the cred and ts pointers would cause alignment problems, so they were converted to structs and the necessary data was memcpy()'ed to them. the aux[] buffer was also potentially misaligned, so making a union out of it and struct cmsghdr insured it was properly aligned. The problems were especially visible on alpha and ia64 machines. Thanks to Jason Duerstock for the fix. - bugfix testbench: some test were accidentally not executed Thanks to Kasumi Hanazuki for the patch. - bugfix tcp subsystem: keepalive settings mixed up TCPKeepAliveIntvl and TPCKeepAliveTime were switched. This is now correct and thus causes a CHANGE OF BeHAVIOR of these settings. We applied this change only after careful consideration of the effect. The contributor Alexandre Pierret explained the situation as such: "From my side, I work with thousands of servers centralizing logs to rsyslog servers in tcp. All of them are running RHEL 6 and 7. The default rsyslog settings in RHEL is TCPKeepAlive off. Since there are thousands of connections on the rsyslog servers, I had to turn the TCPKeepAlive on to setup an aggressive policy regarding ghost connections (following firewall tcp-timeout issue). Basically, I set up: intvl=10 - probe=5 - time=2 If intvl and time are switched, it won't break anything. It will just send 5 more empty tcp packets for 10 seconds (5 probe x 2 seconds), which is painless (any professional grade 100€ router can send more than 1.000.000 PPS). For 3000 servers, it means 3000 pps for 5 seconds (3000 servers x 2 back-and-forth / 2 seconds). Let's take another worst example: intvl=3600 - probe=5 - time=1. It means one keepalive every hour and a 5 retry every 1s after a network issue. If the time and intvl values are switched, it will generate 1 keepalive every seconds, It's a LOT more, but after 5 probe or packet, it will stop. To summarize, I think it won't break anything: * Keepalive is off by default is many linux distribution * When we enable it, it's to set up an aggressive policy. And setting up a 10-5-1, 60-5-2, 2-5-60 or 1-20-1 policy is almost the same. Bonus: For people setting up their rsyslog from the documentation, it will now work as expected." This was convincing, and we actually think that the fast majority of users set up keepalive based on the doc and did never verify it actually worked as expected. So we think that in all those cases, rsyslog will finally work as intended. So we consider it justified to "change the behavior" here. full discussion in PR: https://github.com/rsyslog/rsyslog/pull/2367 Thanks to Alexandre Pierret for analyzing the situation and providing the patch. - fix some cosmetic issues found by lgtm.com static code analyzer e.g. header file guard not correctly set - if you really are interested in details, check git log - CI * add build test without atomic operations - now catches missing mutex macros * add lgtm.com static analyzer (automatically called via GitHub PR) * improved stability of global-umask.sh test, which unnecessarily used wildcards for test output file checking. Thanks to Kasumi Hanazuki for the patch. * added some test for omprog with transactional interface Thanks to Joan Sala for the new tests. * fixed some omjournal tests which did not properly check result ------------------------------------------------------------------------------ Version 8.33.1 [v8-stable] 2018-03-06 - 8.33.0 tarball release was actually pre-8.33.0 ... and so did not contain all features. This alone made a re-release necessary, which is what now happens with 8.33.1. Note: the git 8.33.0 label was correctly applied, "just" the tarball was wrong. - devcontainer: use some more sensible defaults and add ability to specify generic docker run options this makes integration into CI (and other scripting) easier - fix problems with make dist make dist did not package everything that was needed for CI, thus resulting in make check failures if build from tarball. Thanks to Thomas D. (whissi), and Michael Biebl for alerting us on the problem, providing advise and some of the patches. We also added addt'l patches ourselves. The problem occurred as the CI check for tarball completeness was more or less disabled a couple of weeks ago, which unfortunately went unnoticed. We have also applied some more safeguards to detect such problems in the future. ------------------------------------------------------------------------------ Version 8.33.0 [v8-stable] 2018-02-20 - auto-detect if running inside a container (as pid 1) adjust defaults in this case to be more container-friendly - config: add include() script object This permits to include files (like legacy $IncludeConfig) via a script object. Needless to say, the script object offers more features: - include files can now be - required, with rsyslog aborting when not present - required, with rsyslog emitting an error message but otherwise continuing when not present - optional, which means non-present include files will be skipped without notice This is controlled by the "mode" parameter. - text can be included form e.g. an environment variable --> ex: include(text=`echo $ENVVAR`) This finally really obsoletes $IncludeConfig. closes https://github.com/rsyslog/rsyslog/issues/2151 - template: add option to generate json "container" This enables easy JSON generation via template. This commit also corrects an issue with the constant "jsonf" format. That was recently added, and the implementation problem only became visible when used inside a larger json object. No officially released code is affected, thought - so it really is just a side-note. closes https://github.com/rsyslog/rsyslog/issues/2347 - core/template: add format jsonf to constant template entries closes https://github.com/rsyslog/rsyslog/issues/2348 - config: add ability to disable config parameter ("config.enabled") For auto-generated configs, it is useful to have the ability to disable some config constructs even though they may be specified inside the config. This can now be done via the ```config.enabled``` parameter, applicable to all script objects. If set to ```on``` or not specified, the construct will be used, if set to any other value, it will be ignored. This can be used together with the backtick functionality to configure enable and disable from either a file or environment variable. closes https://github.com/rsyslog/rsyslog/issues/2431 - script: permit to use environment variables during configuration new constant string type "backticks", inspired by sh (sample: `echo $VARNAME`). - new global config parameter "shutdown.enable.ctlc" permits to shutdown rsyslog via ctl-c; useful e.g. in containers - config optimizer: detect totally empty "if" statements and optimize them out - template: constant entry can now also be formatted as json field This enhancements permits to craft clean templates that generate JSON, e.g. for ElasticSearch consumption (or any other REST API) - omstdout: support for new-style configuration parameters added - core: set TZ on startup if not already set In theory, TZ should be set by the OS. Unfortunately, this seems to be not the case any longer on many Linux distros. We now check it and set it appropriate if not already given. Thanks to github user JPvRiel for providing an excellent explanation of the reasoning for this and how to work around it. closes https://github.com/rsyslog/rsyslog/issues/2054 - imjournal bugfix: file handle leak during journal rotation Thanks to Peter Portante for the patch see also: https://github.com/rsyslog/rsyslog/pull/2437 - lmsig_ksils12 bugfix: dirOwner and dirGroup config was not respected - script bugfix: replace() function worked incorrectly in some cases If the end of the message was similar to the replacement string, parts of the string could (not always) be missing. Thanks to Yaroslav Bo for the patch. - build system bugfix: --disable-libcurl did not work Thanks to Dan Molik, Thomas D. (whissi), and Michael Biebl for the patches. - fixed build issues on Alpine Linux - core bugfix: misaddressing in external command parser This parser is used whenever a module (e.g. omprog) needs to process command lines. If command parameters were given, memory misaddressing occurred. This could lead to a segfault. This is a regression in 8.32.0. closes https://github.com/rsyslog/rsyslog/issues/2408 - core bugfix: small memory leak in external command parser This parser is used whenever a module (e.g. omprog) needs to process command lines. On each action definitions for actions that use the parser a small amount of memory was leaked. It is an uncritical leak as it only occurs during config parsing. So it leaks a couple of KiB during startup but does not grow during actual message processing. This is a regression in 8.32.0. - core bugfix: string not properly terminated when RFC5424 MSGID is used This could lead to misaddressing when the jsonmesg property was used. closes https://github.com/rsyslog/rsyslog/issues/2396 - bugfix: strndup() compatibility layer func copies too much The function did not obey the upper limit, effectively becoming a strdup(). This was only noticed when the compatibility layer was required, most importantly on Solaris 10. - CI system - we now use well-defined containers for parts of the CI runs - now also build test under Alpine Linux - test added for omprog feedback feature ------------------------------------------------------------------------------ Version 8.32.0 [v8-stable] 2018-01-09 - NEW BUILD REQUIREMENTs: * libfastjson 0.99.8 is now required; older versions lead to bugs in rsyslog * libczmq >= 3.0.2 is now required for omczmq This was actually required for quite some while, but not properly checked during configure run. If the lib was older, build failed. Now configure detects this and emits the appropriate error message. * libcurl is now needed for rsyslog core due to new script function http_request(). This can be turned off by the new configure option --disable-libcurl. If so, http_request() is not available. - rsyslogd: add capability to specify that no pid file shall be written Command line option -iNONE provides this capability. This utilizes the pre-existing -i option, but uses the special name "NONE" to turn of the pid file check feature. Turning off is useful for systems where this no longer is needed (e.g. systemd based). closes https://github.com/rsyslog/rsyslog/issues/2143 - ompgsql: considerable enhancements The PostgreSQL output module was woefully out-of-date the following list is changes made to update the module to current Rsyslog standards. * allow for v6 configuration syntax * configurable ports * support transactional interface * push db connection into workers (libpq is threadsafe) * enable module testing on travis * ensure configuration syntax backwards compatibility * formatting around postgres core templating * use new test conventions * add new configuration syntax test * add valgrind tests for new and old syntax * add threading tests * add action queue long running tests * add action queue valgrind test Thanks to Dan Molik for contributing this great enhancement! - build system: removed --enable-rtinst configure option This was a historic debugging option which has been superseded by newer tools like valgrind, helgrind, ASAN, TSAN, etc... - pmrfc3164: support for headerless messages pmrfc3164 now detects if the first non-SP, non-HT character is either '{' or '[' and if so assume that no header (TAG, HOSTNAME, DATE) is given. If so, it uses defaults for these values. The full message is used as the MSG part in that case. Note that an initial PRI may still be specified. This follows the trend to send JSON messages via syslog without any header. We use default header values in this case. This right now is a bit experimental; we may roll it back if problems show up in practice. closes https://github.com/rsyslog/rsyslog/issues/2030 - omhiredis: add option to use RPUSH instead of LPUSH see also https://github.com/rsyslog/rsyslog/issues/1625 - mmexternal improvements * better error reporting if to-be-executed script cannot be executed * some general cleanup * better redirection of stdin/out/err for the executed script * bugfix: argv[0] of the script was missing if command line parameters were not specified - omprog: refactored, code shared with mmexternal moved to common object - logctl tool: refactor to support newer rsyslog standards * Made the logctl usertool ISO C90 compliant. * Made the logctl usertool use a homogeneous coding style. Thanks to Hugo Soszynski for contributing this work (as well as suggesting some workarounds related to libmongoc/libbson). - imfile: added support for Solaris File Event notification (FEN) also improves performance under Solaris, with FEN imfile provides features equivalent to inotify mode - core/action: new parameter "action.errorfile" permits to write failed messages to an "error file" so that they can be reviewed and potentially be reprocessed - imfile: added new module parameter "sortFiles" This permits to process newly created files in sorted order. - imuxsock: improved status reporting: socket name received from systemd Providing an indication of what we got from systemd facilitates problem analysis. - build system: added new testbench configure switches now --enable-testbench1 and --enable-testbench2 exists which permit to enable/disable parts of the testbench. By default, both are on when --enable-testbench is given. For full testbench coverage, both options must be given. These options are necessary because under Travis we hit the max runtime for tests and needed to split tests over multiple incarnations. - mmpstrucdata: new parameter "sd_name.lowercase" to permit preserving case for structured data identifiers Special thanks to github user alanrobson for the initial commit that preserves case (on which we based other work). - omfile: add module-global option "dynafile.donotsuspend" this permits to enable SUSPENDing dynafile actions. Traditionally, SUSPEND mode was never entered for dynafiles as it would have blocked overall processing flow. Default is not to suspend (and thus block). closes https://github.com/rsyslog/rsyslog/issues/2236 - testbench: add a capability to turn off libfaketime tests via configure Unfortunately, libfaketime becomes more and more problematic in newer versions and causes aborts on some platforms. This provides the ability to turn it off via --disable-libfaketime. In the longer term, we should consider writing our own replacement. - testbench: name valgrind tests consistently all valgrind tests now end in -vg.sh - RainerScript: add function parse_json() - RainerScript: add function substring() - RainerScript: add function http_request() - RainerScript: add function previous_is_suspended() This function returns a boolean indicating if the previous action is suspended (0 - no, 1 - yes). This is useful if arbitrary processing (other than calling actions) should be made depending on that state. A prime example for this is probably calling a ruleset. closes https://github.com/rsyslog/rsyslog/issues/1939 - Patches from BSD projects have been imported ... as far as they still apply. Some patches that patched BSD-specific code were broadened to be more generic. - script bugfix: invalid function names were silently ignored no error message was produced thanks to Matt Ezell for providing the patch. - rainerscript: add int2hex() function - rainerscript: add is_time() function Thanks to Stephen Workman for implementing this. - RainerScript: add function script_error() and error-reporting support This permits script functions that could fail to report errors back, so that the user can handle them if desired. We use an errno-style of interface. That means script_error() needs to be called after functions that supports it. It will return either 0 (all OK) or something else (an error condition). The commit also modifies the parse_time() function to use the new interface. First of all, this is useful for users, and secondly we needed a capability to craft a testbench test. closes https://github.com/rsyslog/rsyslog/issues/1978 - testbench: fixed build problem of testbench tools under Alpine Linux - added --enable-libsystemd configure option to enforce use of libsystemd so we can fail the build on platforms where this is required - core/glbl: remove long-unused option $optimizeforuniprocessor This was still available, but had no effect (for ~10 years or so). The plumbing is now removed. If someone tries to use the option, an error message is generated. closes https://github.com/rsyslog/rsyslog/issues/2280 - core/queue: emit better status messages at rsyslog shutdown this helps to diagnose issue - unfortunately we need more work to ensure that the messages always make it to the user. This is a start and hopefully useful at least for the testbench, possibly more. - fixed a couple of build issues with gcc-7 (in less frequently used modules) - fixed a couple of build issues on the arm platform (actually raspbian) - impstats: fix invalid counter definitions for getrusage() reporting some of the counters were defined as int (32 bit) vs. intctr_t (64 bit). On some platforms "long" seems to be 64bit, and getrusage() provides what we store as int via long. So this caused truncation and/or overflow. This had undefined effects. Most often, everything worked fine for values smaller than 2^31 but sometimes we got negative values. closes https://github.com/rsyslog/rsyslog/issues/1517 - imudp bugfix: potential segfault in ratelimiting The rate-limiter inside imudp was not set to be thread safe, but was used across multiple threads. This worked in default configuration, but failed when RepeatedMsgReduction was set to "on". Note that it in general is a bug to use a rate-limiter in non-threadsafe mode across multiple threads. This also causes invalid rate limiting counts in the default case. closes https://github.com/rsyslog/rsyslog/issues/441 fixes https://github.com/rsyslog/rsyslog/issues/2132 - imptcp bugfix: access to free'ed memory When notifyconnectionclose was on, a string buffer was accessed immediately after it was freed (as part of the connection close operation). Detected by LLVM ASAN. - mmanon bugfix: fix wrong ipv6 embedded recognition mmanon recognized IPv6 with embedded IPv4 that have too few (16 bit) fields. example: 13:abd:45:0.0.0.0 closes https://github.com/rsyslog/rsyslog/issues/2357 - imfile bugfix: not detecting files in directory when wildcards are used. When directories and files are created at the same time, imfile may missed subdirs or file if the machine is on high load. The handling has been enhanced to scan newly created directories ALWAYS for matching files. fixes https://github.com/rsyslog/rsyslog/issues/2271 However there still exist problems with multilevel directory configurations. Details are discussed in https://github.com/rsyslog/rsyslog/issues/2354 Fixes for the remaining issues are expected for 8.33.0. - script bugfix: improper string-to-number conversion for negative numbers - core/action bugfix: 100% CPU utilization on suspension of output module Triggering condition: * output module using the legacy transaction interface (e.g. omelasticsearch, omlibdbi) * output module needs to suspend itself In these cases, rsyslog enters a busy loop trying to resolve the suspend condition. The bug is rooted in rsyslog core action code. This patch fixes it by inserting a 1-second sleep during calls to the resume handler. Note: we cannot sleep exactly as long as tryResume needs. This would require larger refactoring, which probably is not worth for the legacy interface. The current solution is almost as good, as the one second sleep has very little overhead on a real system. Thus we have chosen that approach. This patch now also ensures that failed messages are properly handled and do not cause eternal hang. closes https://github.com/rsyslog/rsyslog/issues/2113 - core/variables bugfix: bare $! cannot be used in set statement fixes https://github.com/rsyslog/rsyslog/issues/326 - core bugfix: auto commit of actions improperly handled The internal state variable bHadAutoCommit was handled in thread-unsafe way and most probably caused (hard to see) issues when action instances were run on multiple worker threads. It looks like the state variable was forgotten to move over to worker state when action workers were introduced. closes https://github.com/rsyslog/rsyslog/issues/2046 - core bugfix: filename length limitation of 199 bytes file names (including path names) longer than 199 bytes could not be handled at many places. This has now been uplifted to 4KiB after careful review for the largest size supported among all relevant platforms. - core bugfix: undefined behavior due to integer overflow when searching strings, we may have an (unsigned) integer overflow which can lead to misaddressing. Detected by clang ubsan. - core bugfix: race on LocalHostIP property during startup The way the default was set could lead to a race if e.g. two internal messages were emitted at startup when the property was not yet set. This has been seen to happen in practice. It had no bad effect except a very small stationary memory leak, but made using thread analyzers unreliable (as it was rightfully detected as a problem). closes https://github.com/rsyslog/rsyslog/issues/2012 - bugfix: potential segfault on startup timezone info table was "sorted" even though it may be NULL. There is no practical case known where this lead to an actual abort, but in theory it would be possible. If so, it would happen immediately on startup. Detected by clang ubsan. - omhiredis bugfix: rsyslog segfault on startup if no template is specified - omprog bugfix: argv[0] not set when using binary without arguments When using the omprog plugin with a binary without arguments, argv[0] (the name of the binary) is not set, causing binaries that depend on this value being set to crash or misbehave. This patch also mildly refactors omprog argv[] creations, albeit some more refactoring would be useful. closes https://github.com/rsyslog/rsyslog/issues/1858 - core: refactoring of rsyslog's cstr "class" Function cstrGetSzStrNoNULL shall modified the string buffer on each call, albeit it is considered a "read-only" function. It currently adds a '\0' at the end. This is bad, especially when multiple threads access the same string. As always the same data is written, it was not causing real issues (except unnecessary cache writes), but it polluted the thread debugger and as such prevent more elaborate automated tests. - parent directory creation function refactored This should not cause any change of behavior, but is worth noting in case we see a regression not caught by the CI system. - mmsnmptrapd bugfix: potential misaddressing This only occurred in situations when the system was totally out of memory. - imkafka: fix potential small resource leak If rdkafka handle cannot fully populated, cleanup is added. Previously, we could leak a handle if e.g. no brokers were available. Note that this was a cosmetic leak, as proper processing is not possible in any case and the leak is once per listener, so not growing. But we now also ensure that proper error reporting and handling is done in any case. Previously, we may have some misleading error messages if the defunct kafka handle was used. closes https://github.com/rsyslog/rsyslog/issues/2084 - imkafka bugfix: do not emit error message on regular state This was misunderstood as an error state and could spam the system log considerably. Regression from 8.31.0. - omkafka: expose operational status to user where useful omkafka emits many useful operational status messages only to the debug log. After careful review, we have exposed many of these as user error and warning message (ex: librdkafka queue full, so user knows why we suspend the plugin temporarily). This may have made the module too chatty. If so, one can always filter out messages via configuration. And if we really went overboard, we can undo those parts with the next release. So it's better to give a bit more than less, as this definitely eases troubleshooting for users. closes https://github.com/rsyslog/rsyslog/pull/2334 - omkafka bugfix: potential message duplication If a message that already failed in librdkafka was resubmitted and that resubmit also failed, it got duplicated. - omkafka: fix multithreading omkafka has several issue if multiple worker instances are used. This commit actually make the module use a single worker thread at max. Reasoning: Librdkafka creates background threads itself. So omkafka basically needs to move memory buffers over to librdkafka, which then does the heavy hauling. As such, we think that it is best to run max one wrkr instance of omkafka -- otherwise we just get additional locking (contention) overhead without any real gain. As such, we use a global mutex for doAction which ensures only one worker can be active at any given time. That mutex is also used to guard utility functions (like tryResume) which may also be accessed by multiple workers in parallel. Note: shall this method be changed, the kafka connection/suspension handling needs to be refactored. The current code assumes that all workers share state information including librdkafka handles. closes https://github.com/rsyslog/rsyslog/issues/2313 - omkafka bugfix: potential misaddressing The failed message list is improperly cleaned. This is a regression from recent commit 4eae19e089b5a83da679fe29398c6b2c10003793, which was introduced in 8.31.0. This problem is more likely to happen under heavy load or bad connectivity, when the local librdkafka queue overruns or message delivery times out. closes https://github.com/rsyslog/rsyslog/issues/2184 closes https://github.com/rsyslog/rsyslog/issues/2067 - omkafka bugfix: build fails with older versions of librdkafka closes https://github.com/rsyslog/rsyslog/issues/2168 - omgssapi bugfix: fix compiler warnings with gcc-7 closes https://github.com/rsyslog/rsyslog/issues/2097 - dnscache bugfix: entries were cached based on IP AND port number That hash key which is used to find out already cached dns entry gets incorrectly computed from the whole sockaddr_storage (sockaddr_in/sockaddr_in6) structure including a sin_port (which doesn't have a static value) instead of only an address, thus creating redundant dns cache entries/consuming more space. This lead to potentially high memory usage and ineffectiveness of the case. It could be considered a memory leak. Thanks to Martin Osvald for the patch. see also: https://github.com/rsyslog/rsyslog/pull/2160 - omkafka bugfix: fixed memory leak a memory leak occurred when librdkafka communicated error/status information to omkafka. this seems to happen relatively frequently, so this leak could be pretty problematic. - mmdblookup bugfix: replace thread-unsafe strtok() by thread-safe counterpart Many thanks to Will Storey (github user @horgh) for mentioning this and his phantastic help in debugging this rsyslog problem! - pmnormalize bugfix: remove unsave "strcat" implementation - rainerscript bugfix: ltrim() and rtrim function misaddressing This could lead to a segfault and was triggered by certain input data schemes. For example, a ltrim(" a") could lead to the fault. - imklog bugfix: local host IP was hardcoded to 127.0.0.1 This is now taken from the global localHostIP setting, which is used consistent across all modules. Also, the removed (2012?) directive $klogLocalIPIF has been added again but directly marked as removed. That way, an informative error message is generated if someone tries to use it. closes https://github.com/rsyslog/rsyslog/issues/2276 - cleanup: remove obsolete pre-KSI GuardTime signature interface this is no longer functional starting Jan 2018 as it reached end of life closes https://github.com/rsyslog/rsyslog/issues/2128 - cleanup: obsolete definition SOL_TCP replaced by newer IPPROTO_TCP this should not have any effect at all except better portability, but is worth mentioning in the ChangeLog nevertheless. - lookup tables: fixed undefined behavior detected by UBSan - CI testing - ARM (via Raspberry PI) added to CI system - Debian 9 added to CI system - omgssapi and usertools components are now also tested in Travis - test coverage on BSD has been enhanced ------------------------------------------------------------------------------ Version 8.31.0 [v8-stable] 2017-11-28 - NEW BUILD DEPENDENCY: ommongodb now requires libmongo-c instead of deprecated libmongo-client. - remove systemd embedded code, use libsystemd instead Since the early days rsyslog used the original systemd embedded interface code. This version now uses libsystemd where available. If we do not find libsystemd, we assume the system does not use systemd, which is a safe assumption nowadays. This ensures we use the fresh interface code and also removes bloat from our project. closes https://github.com/rsyslog/rsyslog/issues/1933 - mmanon: add support for IPv6 addresses with embedded IPv4 address While this format is uncommon, it may still be present in logs and as such should be supported. It is configurable via individual settings, though. Especially the number of bits to anonymize may be desired to be different than in pure IPv6. - ommongodb: big refactoring, more or less a feature-enhanced rewrite New features are : * Handle TLS connection to mongodb * Handle MongoDB Replicasets * Added the 'ssl_ca' and 'ssl_cert' directives to configure tls connection * Added 'uristr' directive to configure the connection uri in the form of 'mongodb://...' Now uses the official mongo-c-driver library instead of the deprecated mongo-client library Special thanks to Hugo Soszynski and Jérémie Jourdin for there hard work to make this a reality! See also: https://github.com/rsyslog/rsyslog/pull/1917 - rainerscript: add parse_time() function Thanks to Stephen Workman for implementing this. - omelasticsearch: add LF to every elastic response for error file error file content was written without LF after each message, making it hard to work with and monitor. Thanks to Yaroslav Bo for the patch. - omelasticsearch: add pipeline support supports static and dynamic ElasticSearch pipeline parameter. closes https://github.com/rsyslog/rsyslog/issues/1411 Thanks to github users scibi and WaeCo for the implementation. - lmsig_ksi_ls12: support asynchronous mode of libksi - omprog: added error handling and transaction support for external plugins This permits much better integration of external output modules. Special thanks to Joan Sala for providing this work! - imzmq3/omzmq3: marked as deprecated, modules will be remove in v8.41 see also: https://github.com/rsyslog/rsyslog/issues/2100 - imzmq3/omzmq3: fixed build issues with gcc-7 - core: emit error message on abnormal input thread termination This indicates a serious issue of which the user should be notified. Was not done so far and caused grief when troubleshooting issues. - core: refactored locking for json variable access refactored the method so that it consistent in all functions and easier to follow. Most importantly, now an as simple as possible locking paradigm of lock ... unlock within the function. Hopefully easier to understand both for humans and static code analyzers. - core: refactored creation of UDP sockets was very old, hard to follow code; streamlined that a bit - core/dnscache: refactor locking keep a simple lock ... unlock scheme within the function. That is easier to follow for both humans as well as static analyzers. Also removes Coverity scan CID 185419 - rainerscript: use crypto-grade random number generator for random() function We now use /dev/urandom if available. If not, we fall back to the weak PRNG. - imkafka: improve error reporting and cleanup refactoring - imkafka bugfix: segfault if "broker" parameter is not specified Now emits warning message instead and uses hardcoded default (which usually matches where the kafka broker can be found). fixes https://github.com/rsyslog/rsyslog/issues/2085 - omkafka: improve error reporting - omkafka: slight speedup do to refactoring of LIST class double-linked list was used for temporarily undeliverable message tracking where singly-linked list was sufficient. Changed that. - TCP syslog: support SNI when connecting as a client This is done if a hostname is configured and turned off if an IP is used. Thanks to Art O Cathain for the patch. see also https://github.com/rsyslog/rsyslog/pull/1393 - msg variable bugfix: potential segfault on variable access A segfault is likely to happen if during processing a variable with more than one path component is accessed (e.g. $!path!var) and NO variables oft hat kind (local, message, global) are defined at all. closes https://github.com/rsyslog/rsyslog/issues/1920 - ratelimiting bugfix: data race in Linux-like ratelimiter access to the Linux-like ratelimiter was not properly synchronized, and the system rate-limiter was not using it in any case. This could lead to the rate-limit settings not being properly respected, but no "hard error". - core/template bugfix: potential NULL pointer access at config load could happen if the config was loaded and the parameters could not properly be processed. If so, this occurred only during the startup phase. Detected by Coverity scan, CID 185318 - core/json var subsystem bugfix: segfault in MsgSetPropsViaJSON Invalid libfastjson API use lead to double-free. This was most importantly triggered by mmexternal (but could potentially be triggered by other uses as well) closes https://github.com/rsyslog/rsyslog/issues/1822 - core/wrkr threads bugfix: race condition During e.g. shutdown it could happen that a worker thread was started and immediately be requested to terminate. In such situations there was a race the prevented proper initialization. This could lead to follow-on problems. We believe (but could not proof) that this also could lead to a hang of the termination process. Thus we claim to close an issue tracker down here below, but are not 100% certain it really closes it (we hope for user feedback on this). In any case, the thread debugger showed invalid operations and this has been fixed, so it is useful in any case. closes https://github.com/rsyslog/rsyslog/issues/1959 - core/wtp: potential hang during shutdown when the wtp worker is cancelled in the final stage of shutting down while the mutex is locked and there is one worker left, the system will hang. The reason is that the cancelled thread could not free the mutex that the other needs in order to shut down orderly. Detected with clang thread sanitizer. - omfwd bugfix: generate error message on connection failure - imtcp bugfix: "streamdriver.mode" parameter could not be set to 0 - imjournal bugfix: module was defunctional The open function was broken by commit 92ac801, resulting in no data being ever read from the journal. patch bases on the idea of Radovan Sroka given here: https://github.com/rsyslog/rsyslog/issues/1895#issuecomment-339017357 but follows the current imjournal-paradigm of having the journal handle inside a global variable. see also https://github.com/rsyslog/rsyslog/issues/1895 closes https://github.com/rsyslog/rsyslog/issues/1897 - imjournal: refactor error handling, fix error messages imjournal did not try to recover from errors and used the error state returned by journal functions incorrectly, resulting in misleading error messages. Fixed this and also increased the number of error messages so that it now is easier to diagnose problems with this module. Also a little bit of internal brush-up. -mmdblookup bugfix: fix potential segfault due to threading issues libmaxminddb seems to have issues when running under multiple threads. As a first measure, we prevent mmdblookup now from running on more than one thread concurrently. see also: https://github.com/rsyslog/rsyslog/issues/1885#issuecomment-344882616 - omelasticsearch bugfix: operational error messages not passed to user This lead to sometimes hard to diagnose problem. Note that for obvious reasons the amount of messages from omelasticsearch has increased; this is not a sign of a problem in itself -- but it may reveal problems that existed before and went unnoticed. Also note that too-verbose messages can be filtered out via regular rsyslog methods (e.g. message discarding based on content). - omkafka bugfixes * statistics counter maxoutqsize could not be reset Thanks to github user flisky for the patch. * potential hang condition omkafka did not release a mutex under some error conditions (most notably out of memory on specific alloc calls). This lead to a hang during actively processing messages or during shutdown (at latest). This could happen only if dynamic topics were configured. Detected by Coverity Scan, CID 185781 (originally 185721, detected as a different issue by Coverity after code refactoring done in regard to 185721 -- then the problem became more obvious). * file handle leak, which could occur when local buffering of messages was needed * invalid load of failedmsg file on startup if disabled error "rsyslogd: omkafka: could not load failed messages from " "file (null) error -2027 - failed messages will not be resend." occurs because, despite `keepFailedMessages="off"` as a default, omkafka still tries to check for and load a `(none)` file which triggers an IO error of sorts according to the 2027 link above. Obviously, it probably shouldn't try load the file if `keepFailedMessages` is not enabled. Thanks to github user JPvRiel for a very good error report and analysis. closes https://github.com/rsyslog/rsyslog/issues/1765 * various config parameters did not work These were not even recognized when used and lead to a config startup error message: ~ closeTimeout ~ reopenOnHup ~ resubmitOnFailure ~ keepFailedMessages ~ failedMsgFile closes https://github.com/rsyslog/rsyslog/issues/2052 * considerable memory leak Whenever a message could (temporarily) not be delivered to kafka, a non-trivial amount of memory was leaked. This could sum up to quite a big memory leak. fixes https://github.com/rsyslog/rsyslog/issues/1991 * some small memory leaks fixed most of them cosmetic or a few bytes statically (not growing as omkafka was used) -- thus we do not mention each one explicitly. For more details, see git commit log or this pull request: https://github.com/rsyslog/rsyslog/pull/2051 - kafka bugfix: problem on invalid kafka configuration values omkafka ended up in an endless loop and high cpu. imkafka tried to subscribe to a not connected kafka server. closes https://github.com/rsyslog/rsyslog/issues/1806 - [io]mgssapi: fix build problems (regression from 8.30.0) - [io]czmq: fix build problems on some platforms (namely gcc 7, clang 5) - tcpsrv bugfix: potential hang during shutdown - queue bugfix: potential hang during shutdown - queue bugfix: NULL pointer dereference during config processing If the queue parameters were incorrectly given, a NULL pointer dereference could happen during config parsing. Once post that stage, no problem could occur. Detected by Coverity scan, CID 185339 - imczmq bugfix: segfault happened in a call to 371: zcert_destroy(&serverCert) called from rcvData(). Thanks to ~achiketa Prachanda for the patch. - imfile: some small performance enhancements Thanks to Peter Portante for the patch - omfile: handle file open error via SUSPEND mode For a while, an open file error lead to suspension as the error was not detected by the rule engine. This has changed with fixes in 8.30.0. I asked users what they prefer (and expect) and everyone meant it should still be handled via suspension. See github tracker below for more details. closes https://github.com/rsyslog/rsyslog/issues/1832 - omfile bugfix: race during directory creation can lead to loop There was a race where two threads were competing for directory creation which could lead to none succeeding and a flood of error message like this "error during config processing: omfile: creating parent directories for file". This has been solved. Thanks to Niko Kortström for the patch. - imudp: improve error reporting When udp listener cannot be created, an error message containing the ip-address and port is put out. closes https://github.com/rsyslog/rsyslog/issues/1899 - omrelp bugfix: incorrect error handling if librelp with TLS but without Authentication was included, librelp did not emit the correct error message due to invalid error code check. It also did not err-out but instead suspended itself. Detected by Coverity scan, CID 185362 - [io]mrelp bugfix: segfault on startup if configured cert not readable When the certificate file specified in the omrelp/imrelp configuration can't be accessed, e.g. because it doesn't exist or you don't have permission to do so, a Segmentation Fault will appear when you start Rsyslog. This commit fixes that problem. closes https://github.com/rsyslog/rsyslog/issues/1869 - mmanon fix: make build under gcc 7 Thanks to William Dauchy for the patch - mmpstrucdata bugfix: formatting error of ']' char This was invalidly formatted as '"'. Thanks to github user wu3396 for the error report including the patch idea. closes https://github.com/rsyslog/rsyslog/issues/1826 - mmexternalb bugfix: memory leak - core/stats bugfix: memory leak if sender stats or tracking are enabled - core bugfix: potential segfault during startup A NULL pointer could be accessed if there was a problem with the timezone parameters. Affects only startup, once started, no problem existed. Detected by Coverity scan; CID 185414 - core bugfix: potential race in variable handling Root of variable tree is accessed prior to locking access to it. This introduces a race that may result in various kinds of misaddressing. Found while reviewing code, no bug report exists. - core bugfix: potential segfault when shutting down rsyslog when rulesets are nested a segfault can occur when shutting down rsyslog. the reason is that rule sets are destructed in load order, which means a "later" ruleset may still be active when an "earlier" one was already destructed. In these cases, a "call" can invalidly call into the earlier ruleset, which is destructed and so leads to invalid memory access. If a segfault actually happens depends on the OS, but it is highly probable. The cure is to split the queue shutdown sequence. In a first step, all worker threads are terminated and the queue set to enqOnly. While some are terminated, it is still possible that the others enqueue messages into the queue (which are then just placed into the queue, not processed). After this happens, a call can no longer be issued (as there are no more workers). So then we can destruct the rulesets in any order. closes https://github.com/rsyslog/rsyslog/issues/1122 - core/action bugfix: potential misaddressing when processing hard errors For batches that did fail in an output module, the rsyslog core tries to find offending messages that generate hard (non-recoverable) errors. During this process, the action templates for each message are copied into a temporary buffer. That copy was invalidly sized, actually copying only the first template string. As such, outputs that requested more template strings AND had errors in batch submission received uninitialized pointers. This could lead to all sorts of problems. see also https://github.com/rsyslog/rsyslog/issues/1885 closes https://github.com/rsyslog/rsyslog/issues/1906 - template object bugfix: NULL pointer access on invalid parameters could happen only during startup Detected by Coverity scan, CID 185376 - omjournal bugfix: NULL pointer access on invalid parameters could happen only during startup - omelasticsearch bugfix: configured credentials not used during health check Authentication credentials were not applied during health check, permission to use unsigned CERTS was not applied to regular data post. closes https://github.com/rsyslog/rsyslog/issues/1949 - omelasticsearch bugfix: abort on unavailable ES server Depending on the state of unavailability (libcurl return code), omelasticsearch tries to process a NULL return message, what leads to a segfault. This fixes the problem and introduces better error handling and better error messages. see also https://github.com/rsyslog/rsyslog/issues/1885 - omelasticsearch: fix memory leak and potential misaddressing Commit 96b5fce introduced regressions, leading to potential misaddressing and a very probable memory leak. This commit fixes the issues and hardens the module to better detect some error cases in the future. It also adds valgrind-based testbench tests which ensure that no pointer errors exist. If they had been in place, the regressions would never have been undetected. Note that commit 96b5fce was introduced in 8.23.0 on Nov, 15th 2016. Many thanks to Yaroslav Bo for alerting me on the root problem and providing a very good analysis and guidance. see also https://github.com/rsyslog/rsyslog/issues/1906 see also https://github.com/rsyslog/rsyslog/issues/1964 closes https://github.com/rsyslog/rsyslog/issues/1962 - omelasticsearch bugfix: output from libcurl to stdout omelasticsearch made libcurl output messages to stdout. This commit fixes that. It also automatically enables libcurl verbose mode during debug runs - it needs to be seen if this is smart or not (previously, code needed to be commented in). closes https://github.com/rsyslog/rsyslog/issues/1909 - iczmq bugfix: potential memory leak - imptcp bugfix: potential misaddressing When during a connection request the remote peer could not be identified, imptcp could misaddress memory if it is configured to emit messages on connection open. Detected by clang 5.0 static analyzer. - imptcp: potential buffer overflow if the local hostname or IP is larger than NI_MAXHOST-1, an internal buffer is overflowed. This is irrespective of any input data. Detected by Coverity scan, CID 185390 - core/nsd_gtls: fix potential uninitialized data access could occur during certificate check found by clang 5.0 static analyzer - stats bugfix: potential program hang due to missing unlock. This could only occur if pstats was set to CEE-format logging (very uncommon) AND if the system runs out of memory (in which case other things go pretty bad as well). found by Coverity scan - omfwd bugfix: memory leak if network namespaces are used very seldom used feature, occurs only during error case found by Coverity scan. - core: potential misaddressing when accessing JSON properties When a JSON property is accessed in template processing, memory may have been misaddressed or a double-free may occur while obtaining the property. This was detected by a Coverity scan. - gcry crypto provider bugfixes: potential misaddressing and memory leak If the config parameters were invalid, a misaddressing could occur. If so, this happens only during startup. Also, a memory leak existed when the crypto provider errored out. This could build up if it were used in frequently-changing dynafiles. This was detected by Coverity scan, CID 185360. - core/file stream object bugfix: memory leak If a multiline read errored out, a line buffer could be leaked. Detected by Coverity scan, CID 185328 - imdiag bugfix: double mutex unlock when working with stats Note: while this could potentially lead to a program hang, it affected only testbench execution as imdiag is a testbench-only tool. Detected by Coverity scan, CID 185348 and 185350 - fixed several minor and cosmetic issues found by Coverity scan including false positives. For details see "$ git log". All noteworthy issues are separately mentioned in this ChangeLog. The ones not mentioned are for example problems that can only occur during out of memory conditions, under which it is extremely likely tha the rsyslog process will be killed in any case - testbench: * added compile-check for [io]mgssapi, mmcount * harden tests against hanging previous instances * re-enable RELP tests on Solaris * added basic test for imjournal * added threading tests via valgrind's helgrind tool * added valgrind test for kafka modules * added capability to run elasticsearch tests with a) different ElasticSearch versions b) independently from OS-installed version This also sets base to enable more elaborate ES tests * further relaxed timing of dynstats tests, as they tend to create false positives on slow machines - CI: improved test coverage on FreeBSD - Travis: clang static analyzer 5.0 now run over all source files - build: make compile warning-free under gcc 7 ------------------------------------------------------------------------------ Version 8.30.0 [v8-stable] 2017-10-17 - NEW BUILD REQUIREMENTS * libfastjson 0.99.7 is now mandatory the new version is required to support case-insensitive variable comparisons, which are now the default * when building imjournal, libsystemd-journal >= 234 is now recommended This is to support the imjournal enhancement. Note that it is possible to build with lower version, but this will degrade imjournal functionality. - CHANGE OF BEHAVIOR: all variables are now case-insensitive by default Formerly, JSON based variables ($!, $., $/) were case-sensitive. Turn old default back on: global(variables.casesensitive="on") See ChangeLog entry below for more details. - core: handle (JSON) variables in case-insensitive way The variable system inside rsyslog is JSON based (for easy consumption of JSON input, the prime source of structured data). In JSON, keys ("variable names") are case-sensitive. This causes constant problems inside rsyslog configurations. A major nit is that case-insensitivity option inside templates (even if turned on) does not work with JSON keys because they of inner workings*1. It is much more natural to treat keys in a case-INsensitive way (e.g. "$!Key" and "$!key" are the same). We do not expect any real problems out of this, as key names only differing in case is highly unlikely. However, as it is possible we provide a way to enable case-sensitivity via the global(variables.casesensitive="on") global config object. Note that the default is to do case-insensitive matches. The reason is that this is the right thing to do in almost all cases, and we do not envision any problems at all in existing deployments. *1 Note: case-insensitivity in rsyslog is achieved by converting all names to lower case. So that the higher speed of strcmp() can be used. The template option does actually that, convert the template keys to lower case. Unfortunately, this does not work with JSON, as JSON keys are NOT converted to lower case. closes https://github.com/rsyslog/rsyslog/issues/1805 - imjournal: made switching to persistent journal in runtime possible with this patch imjournal can continue logging after switch to persistent journal without need to restart rsyslog service Thanks to github user jvymazal for the patch - mmanon: complete refactor and enhancements - add pseudonymization mode - add address randomization mode - add support for IPv6 (this also supports various replacement modes) closes https://github.com/rsyslog/rsyslog/issues/1614 also fixes bugs - in IPv4 address recognition closes https://github.com/rsyslog/rsyslog/issues/1720 - in IPv4 simple mode to-be-anonymized bits can get wrong closes https://github.com/rsyslog/rsyslog/issues/1717 - imfile: add "fileoffset" metadata This permits to send the offset from which the message was read together with the message text. Thanks to github user derekjsonar for the initial implementation which we extended to use the message start offset. - RainerScript: add ltrim and rtrim functions closes https://github.com/rsyslog/rsyslog/issues/1711 - core: report module name when suspending action Thanks to Orion Poplawski for the patch. - core: add ability to limit number of error messages going to stderr This permits to put a hard limit on the number of messages that can go to stderr. If for nothing else, this capability is helpful for the testbench. It permits to reduce spamming the test log while still providing the ability to see initial error messages. Might also be useful for some practical deployments. global parameter: global(errorMessagesToStderr.maxNumber) - tcpsrv subsystem: improve clarity of some error messages operating system error message are added to some messages, providing better advise of what actually is the error cause - imptcp: include module name in error msg - imtcp: include module name in error msg - tls improvement: better error message if certificate file cannot be read - omfwd: slightly improved error messages during config parsing They now contain config file/line number information where this was missing. - ommysql improvements * Return specific code for unrecoverable errors. This makes retry processing more performant and robust. * error messages improved * Update to utilize native v8 transactional interface. Previously, it used the v7 interface with v8 emulation. * treat server and client-generated messages differently Server-generated error messages are considered non-recoverable, while client generated once point into connection problems (which simply can be retried). This is part of the improvements towards better message-induced errors. Previous commits did only handle SQL parsing errors, now we aim to address all of the message-induced error. We assume that all server-generated errors are such - mysql API unfortunately does not provide a clear indication of what type if error this is and it is out of question to check for hundreds of error codes. closes https://github.com/rsyslog/rsyslog/issues/1830 - ommysql bugfix: do not duplicate entries on failed transaction If a multi-message batch contains data errors, messages may be duplicated as connection close is implicit commit (not rollback). This patch introduces a specific rollback request in those cases. closes https://github.com/rsyslog/rsyslog/issues/1829 - imtcp bugfix: parameter priorityString was ignored defaults were always used - template/bugfix: invalid template option conflict detection This prevented "option.casesensitive" to be used with the SQL and JSON options. - core/actions: fix handling of data-induced errors Rsyslog core should try to detect data-induced (unrecoverable) errors during action processing. An example of such is invalid SQL statements. If the action returns a data error, rsyslog shall retry individual messages from a batch in an effort to log those without errors. The others shall be dropped. This logic was temporarily disabled after the switch to the new v8 transaction interface. Now this bug is fixed and the testbench has been amended to detect problems in the future. closes https://github.com/rsyslog/rsyslog/issues/974 - core/action bugfix: no "action suspended" message during retry processing The action engine does not emit "action suspended" messages but "resumed" ones in retry processing. This is wrong, as they are a strong indication that something does not work correctly. Nevertheless, "resumed" messages were emitted, which was very puzzling for the user. This patch fixes it so that "suspend" messages are given during retry processing. These do not contain a retry timestamp, providing evidence that a retry is currently being tried. closes https://github.com/rsyslog/rsyslog/issues/1069 - core/ratelimit bugfix: race can lead to segfault There was a race in iminternalAddMsg(), where the mutex is released and after that the passed message object is accessed. If the mainloop iterates in between, the msg may have already been deleted by this time, resulting in a segfault. Most importantly, there is no need to release the mutex lock early, as suggested by current code. Inside mainloop the mutex is acquired when it is time to do so, so at worst we'll have a very slight wait there (which really does not matter at all). This only happens if a large number of internal messages are emitted. closes https://github.com/rsyslog/rsyslog/issues/1828 - core bugfix: rsyslog aborts if errmsg is generated in early startup Note that the segfault can occur only during early startup. Once rsyslog has started, everything works reliably. This condition can especially be triggered by specifying invalid TLS default certificates. closes https://github.com/rsyslog/rsyslog/issues/1783 closes https://github.com/rsyslog/rsyslog/issues/1786 - core bugfix: informational messages was logged with error severity When the main loop reaped a child process (a normal action), this was reported as an error. This caused user confusion. Now it is reported as an informational message. - core bugfix: --enable-debugless build was broken This was a regression from the v8.29.0 debug enhancements Thanks to Stephen Workman for the patch. - queue bugfix: file write error message was incorrect when a queue was restarted from disk file, it almost always emitted a message claiming "file opened for non-append write, but already contains xxx bytes" This message was wrong and did not indicate a real error condition. The predicate check was incorrect. closes https://github.com/rsyslog/rsyslog/issues/170 (kind of) - omrelp bugfix: segfault when rebindinterval parameter is used - imudp bugfix: UDP oversize message not properly handled When a message larger than supported by the UDP stack is to be sent, EMSGSIZE is returned, but not specifically handled. That in turn will lead to action suspension. However, this does not make sense because messages over the UDP max message size simply cannot be sent. closes https://github.com/rsyslog/rsyslog/issues/1654 - core bugfix: memory corruption during configuration parsing when omfwd is used with the $streamdriverpermittedpeers legacy parameter, a memory corruption can occur. This depends on the length of the provided strings and probably the malloc subsystem. Once config parsing succeeds, no problem can happen. Thanks to Brent Douglas for initially reporting this issue and providing great analysis. Thanks to github user bwdoll for analyzing this bug and providing a suggested fix (which is almost what this commit includes). closes https://github.com/rsyslog/rsyslog/issues/1408 closes https://github.com/rsyslog/rsyslog/issues/1474 - core bugfix: race on worker thread termination during shutdown The testbench got some occasionally failing tests. Review of them brought up the idea that there is a race during worker threat termination. Further investigation showed that this might be a long-standing issue, but so far did not really surface as the timing was almost always correct. However, with the new functionality to emit a message on worker shutdown (v8.29), the timing got more complex and now this seemed to occasionally surface. closes https://github.com/rsyslog/rsyslog/issues/1754 - omelasticsearch: avoid ES5 warnings while sending json in bulkmode do this by adding proper content type header to ES request Thanks to William Dauchy for the patch - omelasticsearch bugfix: incompatibility with newer ElasticSearch version ElasticSearch changed its API in newer versions. When "bulkmode" is enabled in omelasticsearch, rsyslog seems to consider all responses from Elasticsearch as errors, even the successful ones. As a consequence, every single request ends up being logged into the error file. closes https://github.com/rsyslog/rsyslog/issues/1731 Thanks to Vincent Quéméner for the patch. - imptcp bugfix: invalid mutex addressing on some platforms code did not compile on platforms without atomic instructions Thanks to github user petiepooo for the patch - imptcp bugfix: do not accept missing port in legacy listener definition If legacy listener definition was used, a missing port was accepted during the config read phase but errored out upon listener activation. This now errors out directly when processing the config directive. ------------------------------------------------------------------------------ Version 8.29.0 [v8-stable] 2017-08-08 - imptcp: add experimental parameter "multiline" This enables a heuristic to support multiline messages on raw tcp syslog connections. - imptcp: framing-related error messages now also indicate remote peer This is the case e.g. for oversize messages. - imtcp: framing-related error messages now also indicate remote peer This is the case e.g. for oversize messages. - imptcp: add session statistics counter - session.opened - session.openfailed - session.closed - imtcp: add ability to specify GnuTLS priority string This permits to set cipher details on a very low level. - impstats: add new resource counter "openfiles" - pmnormalize: new parser module Parser module that uses liblognorm to parse incoming messages. - core/queue: provide informational messages on thread startup and shutdown This provides better insight into operational state of rsyslog and is useful in monitoring system health. Note that this causes the emission of messages not previously seen. They are of syslog.informational priority. - omfwd/udp: improve error reporting, deprecate maxerrormessages parameter Generally improved udp-related error messages (e.g. they now contain the socket number, which makes it easier to related them to errors reported by net.c subsystem). We also deprecated (removed) the "maxerrormessages" configuration parameters. It provided some very rough rate-limiting capabilities and was introduced before we had native rate-limiters. The default was that only the first 5 error messages were actually reported. For long-running instances, that meant that in many cases no errors were ever reported. We now use the default internal message rate limiter, which works far better and ensures that also long-running instances will be able to emit error messages after prolonged runtime. In contrast, this also means that users will see more error messages from rsyslog, but that should actually improve the end user experience. - core: add parameters debug.file and debug.whitelist allows one to generate debug log output only of specific files Background information available at: https://www.linkedin.com/pulse/improving-rsyslog-debug-output-jan-gerhards - core/net.c: improve UDP socket creation error messages - omfwd/udp: add "udp.sendbuf" parameter - core: make rsyslog internal message rate-limiter configurable New parameters "internalmsg.ratelimit.interval" and "internalmsg.ratelimit.burst" have been added. - omelasticsearch bugfixes and changed ES5 API support: * avoid 404 during health check Omelasticsearch responds differently to HTTP HEAD and GET requests and returns correct state only on GET requests. This patch works around that ES bug and always does a GET request even when technically a HEAD request would be sufficient. * avoid ES5 warnings while sending json ES5 is generating warnings when sending json without the proper header: $ curl -i -H "Content-Type: text/json" -XGET 'http://elasticsearch5:9200/' \ -d '{}\n' HTTP/1.1 200 OK Warning: 299 Elasticsearch-5.4.3-eed30a8 "Content type detection for rest requests is deprecated. Specify the content type using the [Content-Type] header." "Wed, 26 Jul 2017 14:33:28 GMT" no issue on previous version. Now, the header is set as application/json. It works for all versions (tested on ES2 and ES5) we also handle the bulkmode where it should be set to application/x-ndjson closes https://github.com/rsyslog/rsyslog/issues/1546 * bugfix for memory leak while writing error file Thanks to William Dauchy for providing the patches - imfile bugfix: wildcard detection issue on path wildcards Wildcards mode was not properly detected when wildcards were only used in a directory name on startup. This caused imfile not to create a proper dynamic filewatch. closes: https://github.com/rsyslog/rsyslog/issues/1672 - omfwd bugfix: always give reason for suspension In many cases, no error message were emitted when omfwd went into action suspension, which was confusing for end users. This patch enables explicit error messages in all those cases. closes https://github.com/rsyslog/rsyslog/issues/782 - omfwd bugfix: configured compression level was not properly used Thanks to Harshvardhan Shrivastava for the patch. - imptcp bugfix: potential socket leak on session shutdown imptcp first tries to remove a to-be-shut-down socket from the epoll set, and errors out if that does not work. In that case, the underlying socket will be leaked. This patch refactors the code; most importantly, it is not necessary to remove the socket from the epoll set, as this happens automatically on close. As such, we simply remove that part of the code, which also removes the root cause of the socket leak. - omfwd/omudpspoof bugfix: switch udp client sockets to nonblocking mode On very busy systems, we see "udp send error 11" inside the logs, and the requesting action is being suspended (and later resumed). During the suspension period (in default configuration), messages are lost. Error 11 translates to EAGAIN and the cause of this problem is that the system is running out of UDP buffer space. This can happen on very busy systems (with busy networks). It is not an error per se. Doing a short wait will resolve the issue. The real root cause of the issue is that omfwd uses a nonblocking socket for sending. If it were blocking, the OS would block until the situation is resolved. The need for a non-blocking sockets is a purely historical one. In the days of single-threaded processing (pre v3), everything needed to be done by multiplexing, and blocking was not permitted. Since then, the engine has dramatically changed. Actions now run on their own thread(s). As such, there is no longer a hard need to use non-blocking i/o for sending data. Many other output plugins also do blocking wait (e.g. omelasticsearch). As such, the real root cause of the trouble is unnecessarily using non-blocking mode, and consequently the right solution is to change that. Note that using blocking i/o might change some timing inside rsyslog, especially during shutdown. So theoretical there is regression potential in that area. However, the core is designed to handle that situation (e.g. there is special shutdown code to handle the blocking case), so this does not stand against the "proper" solution. This patch applies the change on the rsyslog core level, within net.c. The only users of the changed functionality are omfwd and omudpspoof. Imudp is unaffected as it requests server sockets. Note that according to the sendto() man page, there is a second cause for the EAGAIN error, this is when the system temporarily runs out of ephemeral ports. It is not 100% clear if this can also happen in the blocking case. However, if so, we can argue this is a case where we really want the default retry logic. So for the time being, it is appropriate to not handle EAGAIN in a special case any longer. closes https://github.com/rsyslog/rsyslog/issues/1665 - imklog: fix permitnonkernelfacility not working - impstats bugfix: impstats does not handle HUP If the parameter "log.file" is specified, impstats writes its own log file. However, HUP is not handled for this file, which makes the functionality unusable with log rotation. It is also counter- intuitive for users. This patch enables correct HUP processing. As a sideline, it also introduces a generic HUP processing framework for non-action type of loadable modules. closes https://github.com/rsyslog/rsyslog/issues/1662 closes https://github.com/rsyslog/rsyslog/issues/1663 - core bugfix: segfault after configuration errors - core/queue bugfixes: * Fix behavior of PersistStateInterval If PersistStateInterval=1, then each log line read should cause the state file to be updated, but this was not happening because nRecords was being post-increment. Thanks to Anthony Howe for the patch. * potential problem during deserialization if queue object deserialization fails, invalid memory blocks might be free'ed. For more information see https://github.com/rsyslog/rsyslog/pull/1647 Thanks to Derek Smith for the patch. - core bugfix: message garbled after message modification The MsgDup() function will return a garbled message object under these conditions: The message was originally created with message length equal or larger to CONF_RAWMSG_BUFSIZE. This makes rsyslog store the message in dynamically allocated buffer space. Then, a component reduces the message size to a size lower than CONGF_RAWMSG_BUFSIZE. A frequent sample is the parser removing a known-bad LF at the end of the messages. Then, MsgDup is executed. It checks the message size and finds that it is below CONF_RAWMSG_BUFSIZE, which make it copy the msg object internal buffer instead of the dynamically allocated one. That buffer was not written to in the first place, so uninitialized data is copied. Note that no segfault can happen, as the copied location was properly allocated, just not used in this processing flow. In the end result, the new message object contains garbage data. Whenever the new object is used (e.g. in a async ruleset or action) that garbage will be used. Whenever the old object is accessed, correct data will be used. Both types of access can happen inside the same processing flow, which makes the problem appear to be random. closes https://github.com/rsyslog/rsyslog/issues/1658 - lmsig_ksi: removed pre-KSI_LS12 components As of GuardTime, the provider, these no longer work due to backend changes. The lmsig_ksi_ls12 module shall be used instead. This is available since 8.27.0. - testbench bugfix: hang in tests if omstdout is not present Many tests depend on omstdout. Given the fact that omstdout is really only useful for the testbench (at least that's the intent), we now require --enable-omstdout if --enable-testbench is given. The alternative would have been to disable all those tests that need it, which would have lead to considerable less testbench coverage. closes https://github.com/rsyslog/rsyslog/issues/1649 ------------------------------------------------------------------------------ Version 8.28.0 [v8-stable] 2017-06-27 - NEW BUILD REQUIREMENT: librelp 1.2.14 (to build relp components) This was necessary because imrelp requires an API introduced in 1.2.14. - omfwd: add parameter "tcp_frameDelimiter" - omkafka: large refactor of kafka subsystem This offers improvements and greatly increases reliability. Closes https://github.com/rsyslog/rsyslog/issues/1559 Closes https://github.com/rsyslog/rsyslog/issues/1584 Closes https://github.com/rsyslog/rsyslog/issues/1515 Closes https://github.com/rsyslog/rsyslog/issues/1052 May fix https://github.com/rsyslog/rsyslog/issues/1230 - imfile: improved handling of atomically renamed file (w/ wildcards) if a file is atomically renamed, the state file is also being renamed, so processing continues as if the original name were kept. see also: https://github.com/rsyslog/rsyslog/issues/1417 - imfile: add capability to truncate oversize messages or split into multiple also in this case an error message is emitted. Both of these actions are configurable. This also solves memory issues when an endregex does not match for prolonged time. In that case, large parts of the file were previously buffered, which could cause big problems in case e.g. the endregex was simply wrong and never matched. For the later, see also https://github.com/rsyslog/rsyslog/issues/1552 - mmdblookup * upgraded from "contrib" to "fully supported" state * refactored and simplified code * added ability to specify custom names for extracted fields * added ability to specify container name for extracted fields * bugfix: fixed multiple memory leaks - imptcp: add new parameter "flowControl" - imrelp: add "maxDataSize" config parameter Thanks to Nathan Brown for the patch. - multiple modules: gtls: improve error if certificate file can't be opened - omsnare: allow different tab escapes Thanks to Shane P. Lawrence for the patch. - omelasticsearch: converted to use libfastjson instead of json-c json-c was used for historical purposes, and it's source included within the rsyslog source tree. We now use libfastjson inside all components. - imjournal: _PID fallback * added fallback for _PID property when SYSLOG_PID is not available * introduced new option "usepid" which sets which property should rsyslog use, it has 3 states system|syslog|both, default is both * deprecated "usepidfromsystem" option, still can be used and override the "usepid" * it is possible to revert previous default with usepid="syslog" Thanks to Radovan Sroka for the patch - multiple modules: add better error messages when regcomp is failing - omhiredis: fix build warnings Thanks to Brian Knox for the fix. - imfile bugfix: files mv-ed in into directory were not handled Thanks to Zachary M. Zhao for the patch. see also https://github.com/rsyslog/rsyslog/issues/1588 - omprog bugfix: execve() incorrectly called this caused failures on some but not all platforms Thanks to 張君天(Chun-Tien Chang) and Matthew Seaman for the patch. - imfile bugfix: multiline timeout did not work if state file exists The timeout feature for multiline reads does not correctly work for files for which a state file existed. This is usually the case for files that had been processed by a previous run and that still exist on the new start. For all other files, especially those monitored by a wildcard and newly created after the rsyslog start, timeout worked as expected. closes https://github.com/rsyslog/rsyslog/issues/1445 - lmsig_ksi-ls12 bugfix: build problems on some platforms - core bugfix: invalid object type assertion This lead to aborts due to failing assertion. Note that this could only happen during debugging runs which includes runtime instrumentation, something that never should be done in a stable production build. So this did not affect ordinary users, only developers in with deep debugging settings. - regression fix: local hostname was not always detected properly... ... on early start (w/o network). Introduced in 8.27.0. Thanks to github user jvymazal for the patch and whissi for reporting and helping with the analysis. - bugfix: format security issues in zmq3 modules see also: https://github.com/rsyslog/rsyslog/pull/1565 Thanks to Thomas D. (whissi) for the patch. - bugfix build system: add libksi only to those binaries that need it Thanks to Allan Park for the patch. - bugfix KSI ls12 components: invalid tree height calculation Thanks to Allan Park for the patch. - testbench/CI enhancements * re-enable and add kafka tests Kafka tests were disabled in 8.27.0 (a regression from imkafka). * better testbench coverage for mmdblookup * lmsig_ksi-ls12 is now being built at least on Centos7 ------------------------------------------------------------------------------ Version 8.27.0 [v8-stable] 2017-05-16 - imkafka: add module - imptcp enhancements: * optionally emit an error message if incoming messages are truncated * optionally emit connection tracking message (on connection create and close) * add "maxFrameSize" parameter to specify the maximum size permitted in octet-counted mode * add parameter "discardTruncatedMsg" to permit truncation of oversize messages * improve octect-counted mode detection: if the octet count is larger then the set frame size (or overly large in general), it is now assumed that octet-stuffing mode is used. This probably solves a number of issues seen in real deployments. - imtcp enhancements: * add parameter "discardTruncatedMsg" to permit truncation of oversize messages * add "maxFrameSize" parameter to specify the maximum size permitted in octet-counted mode - imfile bugfix: "file not found error" repeatedly being reported for configured non-existing file. In polling mode, this message appeared once in each polling cycle, causing a potentially very large amount of error messages. Note that they were usually emitted too infrequently to trigger the error message rate limiter, albeit often enough to be a major annoyance. - imfile: in inotify mode, add error message if configured file cannot be found - imfile: add parameter "fileNotFoundError" to optionally disable "file not found" error messages - core: replaced gethostbyname() with getaddrinfo() call Gethostbyname() is generally considered obsolete, is not reentrant and cannot really work with IPv6. Changed the only place in rsyslog where this call remained. Thanks to github user jvymazal for the patch - omkafka: add "origin" field to stats output See also https://github.com/rsyslog/rsyslog/issues/1508 Thanks to Yury Bushmelev for providing the patch. - imuxsock: rate-limiting also uses process name both for the actual limit processing as well as warning messages emitted see also https://github.com/rsyslog/rsyslog/pull/1520 Thanks to github user jvymazal for the patch - Added new module: KSI log signing ver. 1.2 (lmsig_ksi_ls12) - rsyslog base functionality now builds on osx (Mac) Thanks to github user hdatma for his help in getting this done. - build now works on solaris again - imfile: fix cross-platform build issue see also https://github.com/rsyslog/rsyslog/issues/1494 Thanks to Felix Janda for bug report and solution suggestion. - bugfix core: segfault when no parser could parse message This could happen if the default parser chain was changed and the RFC3164 parser was not included. Never seen in practice, just by experimenting in lab. - bugfix core: rate-limit internal messages when going to external log system Rate-limiting was only applied to messages processed internally. While the external logging system probably also applies rate-limiting, it would be preferable that rsyslog applies the same policies on internal messages, no matter where they go. This is now the case. - bugfix core: when obtaining local hostname, a NULL pointer could be accessed. This depends on many factors, among them that no local host name is configured in rsyslog.conf AND the local system configuration also is set to an empty hostname. Thanks to github user jvymazal for the patch. - bugfix core: on shutdown, stderr was written to, even if already closed This lead to messages going to whatever was associated with file descriptor two. Thanks to Allan Park for the patch. - bugfix core: perform MainqObj destruction only when not NULL already This affects the config object; in theory may lead to misaddressing during config parsing. Thanks to github user jvymazal for the patch - bugfix core: memory leak when internal messages not processed internally In this case, the message object is not destructed, resulting in a memory leak. Usually, this is no problem due to the low number of internal message, but it can become an issue if a large number of messages is emitted. closes https://github.com/rsyslog/rsyslog/issues/1548 closes https://github.com/rsyslog/rsyslog/issues/1531 - bugfix imptcp: potential overflow in octet count computation when a very large octet count was specified, the counter could overflow ------------------------------------------------------------------------------ Version 8.26.0 [v8-stable] 2017-04-04 - NEW BUILD REQUIREMENT: liblognorm 2.0.3 is required for mmnormalize If mmnormalize is not built, the build requirements are unchanged. The new version is necessary because it contains an enhanced API for a new mmnormalize feature. - enable internal error messages at all times This is an important change to the design of the rsyslog core internal error message system. Previous code could deadlock if internal messages were issued inside queue processing code, which effectively limited error-reporting capabilities. This change makes it possible to call error messages from any part of the code at any time. As a side-effect, this also fixes an issue where rsyslog could deadlock if imuxsock submited messages to the system log socket when that socket blocked. This was a rare race, albeit consistently reproducible and also seen in practice. The work-around for this issue was to set global(processInternalMessages="on") in rsyslog.conf. With the new code, this race can never happen again. The new code also sets stage for emitting better error messages, especially in places where we previously refrained from doing so and messages went only to the debug log. For some file output and queue subsystem related messages, this is already done, but there is still further work required. Note well: this is a redesign of an important core component. While intensely tested, this may still have some larger regression potential than usual code changes. - core: added logging name of source of rate-limited messages This adds the name to the rate-limiting message itself, making it easier to identify the actual source of "spam" messages. Thanks to github user jvymazal for the patch. - omfwd: omfwd: add support for network namespaces Thanks to Bastian Stender for the patch. - imrelp: honor input name if provided when submitting to impstats Thanks to Jon Henry for the patch. - imptcp: add ability to set owner/group/access perms for uds Thanks to Nathan Brown for implementing this feature. - mmnormalize: add ability to load a rulebase from action() parameter This is especially useful for small rulebases, as it avoids having a separate rulebase file. closes https://github.com/rsyslog/rsyslog/issues/625 - pmrfc3164 improvements - permit to ignore leading space in MSG - permit to use at-sign in host names - permit to require tag to end in colon Thanks to github user bdolez for the contribution - add new global parameter "umask" This is equivalent to "$umask" and permits to convert that construct to new-style config format. closes https://github.com/rsyslog/rsyslog/issues/1382 - core: make use of -T command line option more secure When the -T option is used, a chdir is now done right after chroot. It must be noted, though, that -T is a testing option and has no intent to provide real security. So this change does not mean it actually is sufficiently secure. Thanks to github user jvymazal for the patch. - omfile: add error if both file and dynafile are set - bugfix: build problem on MacOS (not a supported platform) Thanks to FX Coudert for the fix. - regression fix: in 8.25, str2num() returned error on empty string past behavior was to return 0 in this case; past behavior was reinstantiated Thanks to github user jvymazal for the patch. - bugfix omsnmp: improper handling of new-style configuration parameters Thanks to Radovan Sroka for the patch. - bugfix: rsyslog identifies itself as "liblogging-stdlog" in internal messages This occurred when liblogging-stdlog was used, and was used by default (without explicit configuration). This is a regression of the new default, which does not correctly call stdlog_open() in the default case. closes https://github.com/rsyslog/rsyslog/issues/1442 - bugfix imfile: wrong files were monitored when using multiple imfile inputs The bug was introduced by the changes for the multilevel wildcard feature in 8.25.0. We have to handle FileCreate events different if the directory watch is configured or added dynamically. closes https://github.com/rsyslog/rsyslog/issues/1452 - bugfix: setting net.aclResolveHostname/net.acladdhostnameonfail segfaults When compiling using hardened gcc (gentoo), specifying net.aclResolveHostname or net.acladdhostnameonfail results in rsyslogd segfaulting on startup. Thanks to Radovan Sroka for the patch. - bugfix: immark emitted error messages with text "imuxsock" Thanks to Chris Pilkington for the patch. - bugfix tcpflood: build failed if RELP was disabled - fix gcc6 compiler warnings This also fixes a small bug with incorrectly working deprecated -u command line option. Thanks to Nikola Pajkovsky for the patch. - the output module array passing interface has been removed It wasn't functional since the v8 update, and the only user was omoracle, which is a contributed module that is no longer maintained. So we removed that interface to streamline the code. Should it ever be needed again, we could check the 8.25 code base. Note, though, that that code still needs to be adjusted to the v8 engine. - testbench: * tcpflood now automatically enters silent mode during Travis CI testing This reduces testbench output, which is limited under Travis. * the libqpid-proton package is no longer available for Ubuntu trusty. As such, we disabled its use in Travis on this platform. Right now, this means omamqp1 module is no longer tested on trusty. ------------------------------------------------------------------------------ Version 8.25.0 [v8-stable] 2017-02-21 - imfile: add support for wildcards in directory names This now permits to monitor newly created directories without altering the configuration. - add new global option "parser.PermitSlashInProgramname" - mmdblookup: fix build issues, code cleanup Thanks to Dan Molik for the patch. - improved debug output for queue corruption cases - an error message is now displayed when a directory owner cannot be set This mostly happens with omfile and dynafile. The new messages facilitates troubleshooting. - rainerscript: * add new function ipv42num * add new function num2ipv4 - bugfix: ratelimiter does not work correctly is time is set back Thanks to github user hese10 for the patch. see also https://github.com/rsyslog/rsyslog/issues/1354 - core: fix potential message loss in old-style transactional interface This was experienced for example by omrelp. Could loose one message per broken connection, iff that message did not make it to the unacked list. - bugfix queue subsystem: queue corrupted if certain msg props are used The core issues was in the msg object deserializer, which had the wrong deserialization sequence. That in turn lead to queue corruption issues. Corruption of disk queue (or disk part of DA queue) always happens if the "json" property (message variables) is present and "structured-data" property is also present. This causes rsyslog to serialize to the queue in wrong property sequence, which will lead to error -2308 on deserialization. Seems to be a long-standing bug. Depending on version used, some or all messages in disk queue may be lost. closes https://github.com/rsyslog/rsyslog/issues/1404 - bugfix imjournal: fixed situation when time goes backwards This is resolving the situation when system is after reboot and boot_id doesn't match so cursor pointing into "future". Usually sd_journal_next jump to head of journal due to journal approximation, but when system time goes backwards and cursor is still invalid, rsyslog stops logging. We use sd_journal_get_cursor to validate our cursor. When cursor is invalid we are trying to jump to the head of journal This problem with time should not affect persistent journal, but if cursor has been intentionally compromised it could stop logging even with persistent journal. - bugfix: bFlushOnTxEnd == 0 not honored when writing w/o async writer If bFlushOnTXEnd is set, we need to flush on transaction end - in any case. It is not relevant if this is using background writes (which then become pretty slow) or not. And, similarly, no flush happens when it is not set. see also https://github.com/rsyslog/rsyslog/issues/1297 - bugfix core: str2num mishandling empty strings If str2num() receives an empty string, misaddressing happens. This theoretically can lead to a segfault if a RainerScript function is used inside the configuration which calls code that could trigger this bug. closes https://github.com/rsyslog/rsyslog/issues/1412 - bugfix rainerscript: set/unset statement do not check variable name validity Only JSON-based variables can be use with set and unset. Unfortunately, this restriction is not checked. If an invalid variable is given (e.g. $invalid), this is not detected upon config processing on startup. During execution phase, this can lead to a segfault, a memory leak or other types of problems. Thanks to github user mostolog for reporting and helping to analyze this issue. see also https://github.com/rsyslog/rsyslog/issues/1376 closes https://github.com/rsyslog/rsyslog/issues/1377 - bugfix mmrm1stspace: last character of rawmsg property was doubled - bugfix: rsyslog loops on freebsd when trying to write /dev/console Rsyslog 8.23.0 loops on FreeBSD when trying to access a (now revoked) /dev/console file descriptor, as per Alexandre's original bug report [1]. The original patch fixes the problem when tryTTYRecover() sees errno 6 ENXIO. Running FreeBSD 10-stable here and getting errno 5 EIO, same as Xavier gets in his 2016 bug report [2]. New patch [3] includes errno 5 to tryTTYRecover() in runtime/stream.c and fixes the problem for me, on multiple machines. [1] https://github.com/rsyslog/rsyslog/issues/371 [2] https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=211033 [3] https://bz-attachments.freebsd.org/attachment.cgi?id=178452 closes https://github.com/rsyslog/rsyslog/issues/1351 Thanks to Damien Fleuriot for the patch. - bugfix imtcp: fix very small (cosmetic) memory leak For each listener, the name of an assigned ruleset is not freed. This is cosmetic, because it is a very small static leak AND it needs to be kept until end of run anyways (and at end of run the OS frees it). However, the leak breaks memleak checks in the testbench. - fix build issues on some platforms (detected on newer Fedora) ------------------------------------------------------------------------------ Version 8.24.0 [v8-stable] 2017-01-10 - rsyslog now builds on AIX see also: https://github.com/rsyslog/rsyslog/pull/1247 Thanks to github user purnimam1 and the team at IBM Note: the rsyslog project has no AIX platform to ensure that future versions will remain buildable on AIX. If you would like to contribute resources, please contact the rsyslog team. - mmdblookup: new maxminddb lookup message modify plugin Thanks to 饶琛琳 (github user chenryn) for the contribution - mmrm1stspace: new module; removes first space in MSG if present - KSI signature provider: file permissions can now be specified This happens via parameters equal to those used by omfile itself. Note that KSI files can have different permissions/owner than the log files themself. Thanks to Allan Park for the patch. - omzmq: new features Thanks to Brian Knox for the patch. - change: when the hostname is empty, we now use "localhost-empty-hostname" In 8.23.0, "localhost" was used in this case, but that could be misleading. The new name makes the error condition (gethostname() should always return a non-empty name) more obvious. - omelasticsearch: remove "asyncrepl" config parameter The _bulk index endpoint on ElasticSearch 5.0 no longer ignores the ?replication=async query parameter. It was deprecated since 1.5 and silently ignored in 2.x but passing it to a 5.x instance breaks omelasticsearch with a 400 response. closes https://github.com/rsyslog/rsyslog/issues/1250 - omfwd: Add support for bind-to-device (see below on same for imudp) - imudp: Add support for bind-to-device Add support for bind-to-device option to omfwd and imudp modules. Configured using device="name". Only new syntax format is supported. e.g., input(type="imudp" port=["10514"] device="eth0" name="udp") Action(type="omfwd" Target="192.168.1.23" Port="10514" Device="eth0") see also https://github.com/rsyslog/rsyslog/pull/1261 Thanks to David Ahern for the patch. - imudp: limit rcvbufsize parameter to max 1GiB - rainerscript: implement new "call_indirect" statement - bugfix imjournal: make state file handling more robust There is a bug in rsyslog which is caused by not very atomic writes of imjournal statefile. It's hardly reproducible but there is a way. fscanf error appears only when rsyslog reads an empty statefile which causes that imjournal is stopped so no logging from journal is performed. When the statefile contains random bytes error appears again but from journal and imjournal is stopped too. In this patch Rsyslog writes imjournal statefile more atomically and secure. Reading the statefile is more robust and doesn't affect imjournal module so when corrupted statefile is read imjournal ignores statefile, continues with logging and it doesn't stop. Logger can be used as a test if it's logging or not. Patch introduces a new option with both old and new config format "IgnoreNonValidStateFile" which is "on" by default and it can turn off ignorance of non valid statefile. Thanks to github user tomassykora for the patch. - bugfix core: lookup table reload was not properly integrated The opcode was not handled, what lead to misleading messages in debug log. Since we run debug builds more strictly, it also causes an assertion to trigger, thus aborting the test - bugfix core: potential deadlock on shutdown could happen when rsyslog was started and quickly shut down OR when coincidentally a new thread was spawend "with bad timing" around the time of shutdown. See also https://github.com/rsyslog/rsyslog/pull/1274 Thanks to github user tomassykora for the final patch and Rado Sroka for the analysis and an initial patch. - bugfix ommongodb: did not work in v8 due to invalid indirection Thanks to Benoit Dolez for the patch. - bugfix ommongodb: fix tryResume handling To make tryResume working, the connection to mongodb need to be closed. Thus close it on "insert error". Thanks to Benoit Dolez for the patch. - bugfix omfwd: retry processing was not done correctly, could stall see also https://github.com/rsyslog/rsyslog/pull/1261 Thanks to David Ahern for the patch. - bugfix imuxsock: segfault non shutdown when $OmitLocalLogging is on Imuxsock tries to close socket on index 0 which ends with segfault. Thanks to Tomas Sykora for the patch. - testbench: * empty-hostname test did not work correctly * improve debugging by better output ------------------------------------------------------------------------------ Version 8.23.0 [v8-stable] 2016-11-15 - NEW BUILD REQUIREMENT: libfastjson 0.99.3 This was introduced in 8.20.0 as a suggestion and has now become a hard requirement. See 8.20.0 ChangeLog entry for more details. - KSI signatures: removed SHA2-224 hash algorithm This is considered insecure and no longer supported by the underlying KSI library. If still used within a configuration, a descriptive error message is emitted during config processing. Thanks to Henri Lakk for the initial patch. - imfile: new timeout feature for multi-line reads When using startmsg.regex, messages are held until the next one is written. We now provide a "readTimeout" parameter family (see doc) to timeout such reads and ensure messages are not held for a very long time. see also https://github.com/rsyslog/rsyslog/issues/1133 - omfile: improve robustness against network file system failures in case of failure, a close and re-open is tried, which often solves the issue (and wasn't handle before this patch). see also https://github.com/rsyslog/rsyslog/pull/1161 Thanks to github user hese10 for the patch. - pmaixforwardedfrom: support for AIX syslogd -s option if syslog in AIX started with "-s" option, AIX syslog adds only "From " instead of "Message forwarded from ". With this patch, both are now detected. Thanks to github user patelritesh for the patch. - omelasticsearch: add ability to specify max http request size This permits to keep batches below ES-configured limits. Thanks to github user barakshechter for the patch. - omelasticsearch: high availability addressing of ElasticSearch cluster allow one to specify an array of servers, which is tried until a working one is found (and given up only if none works). Thanks to github user barakshechter for the patch. - omelasticsearch: make compatible with ElasticSearch 2.x and 5.x fixes omelasticsearch logs response from ElasticSearch 5.0 _bulk endpoint as error See also https://github.com/rsyslog/rsyslog/pull/1253 Thanks to Christian Rodemeyer for the patch. - omhiredis: add dynakey attribute. If set to on, this causes omhiredis to treat the key attribute as the name of a template so that you can build a dynamic redis queue name or list key. see also: https://github.com/rsyslog/rsyslog/pull/1218 Thanks to github user bobthemighty for the patch - omtcl: new contributed module see also https://github.com/rsyslog/rsyslog/pull/1041 Please note: contributed modules are not directly supported by the project. You might want to contact the author for questions. Thanks to Francisco Castro for contributing it. - RainerScript: provide a capability to set environment variables via 'global(environment="var=val")' config statement. This is most importantly for things like HTTP_PROXY. see also https://github.com/rsyslog/rsyslog/issues/1209 - lookup tables: improved error checking Thanks to Janmejay Singh for the patch. - queue subsystem: add configuration parameter "queue.samplinginterval" Supports sampling of messages (as often used in data transmission). Thanks to Zachary M. Zhao for the patch. - bugfix core: errmsg.LogError now switches to dfltErrLogger just before shutdown Thanks to Janmejay Singh for the patches. - bugfix core: fixed un-freed memory in non-transactional action using string-passing closes https://github.com/rsyslog/rsyslog/issues/968 Thanks to Janmejay Singh for the patches. - rsgtutil: option to specify KSI publications file certificate constraints see also https://github.com/rsyslog/rsyslog/issues/1207 - omprog: bugfixes and enhancements - omprog resource leak fix (fd leak) - omprog got ability to force-kill process if it doesn't die in 5 seconds (linux specific) - child-process lifecycle debugging aid (in form of logs) (mainLoop and omprog cleanup both log pid at child-death, mainLoop reaping is now visible to user, as opposed to being a mystery, because omprog didn't seem to anticipate it in terms of code) Thanks to Janmejay Singh for the patches. see also https://github.com/rsyslog/rsyslog/pull/1155 - bugfix imfile: ReopenOnTruncate processing, file open processing This fixes * ReopenOnTruncate was only honored when a state file existed see https://github.com/rsyslog/rsyslog/issues/1090 * open processing could run into a loop see https://github.com/rsyslog/rsyslog/issues/1174 This is done via refactoring the open file handling, which provides overall cleaner and easier-to-follow code. Thanks to Owen Smith for analyzing the problem and providing a prototype PR which greatly helped towards the final solution. - bugfix omlibdbi: libdbi-driver-sqlite3/2 requires to provide a path to database split into two strings: * absolute path, where the database file sits * database filename itself. This was previously not done. Thanks to github user aleek for the patch. - bugfix RainerScript: issue in prifilt() function Initialize func-data(and to-be-freed flag) correctly for prifilt function-node Thanks to Janmejay Singh for the patch. - bugfix omrelp: invalid module name imrelp was used in some error messages Thanks to Chris Pilkington for the patch. - bugfix core: abort when persisting object state This causes a segfault. It happens whenever an object state larger than 4095 byte is persisted. Then, incorrectly a try to rollover to a new state file is tried, which will lead to a division by zero as the necessary variables for this operation are not set because we are NOT in circular mode. This problem can happen wherever state files are written. It has been experienced with imfile and queue files. Many thanks to github user mostolog for his help in reproducing the issue, which was very important to finally nail down this long-standing bug. closes https://github.com/rsyslog/rsyslog/issues/1239 closes https://github.com/rsyslog/rsyslog/issues/1162 closes https://github.com/rsyslog/rsyslog/issues/1074 - bugfix: segfault if hostname is unset on system happens when gethostname() returns empty string. This will cause the createon of the localhostname prop_t to fail, which in turn leads to a NULL pointer dereference when emitting local messages. As we emit a startup message by default, this had usually lead to a segfault on startup. Thanks to Erik Potter and github user mostolog for their help in analyzing this problem. closes https://github.com/rsyslog/rsyslog/issues/1040 closes https://github.com/rsyslog/rsyslog/issues/335 - bugfix external module perl skeleton: did not work properly Thanks to github user Igorjan666 for the patch. - bugfix build system: Fix detection of pthread_setschedparam() on platforms such as FreeBSD see also https://github.com/rsyslog/rsyslog/pull/1147 Thanks to Matthew Seaman for the patch. - bugfix omelasticsearch: modifies constant memory under some circumstances Function computeBaseUrl may modify its serverParam parameter, but this may contain the constant string "localhost". Depending on the platform, this can lead to a segfault. Noticed while working on compiler warnings, not seen in practice. - "bugfix": theoretical queue file corruption when more than MAX_INT files closes https://github.com/rsyslog/rsyslog/issues/1202 - bug fix/KSI: LOGSIG11 missing in the beginning of KSI log signature file When logging with KSI is not working properly for whatever reason, an empty .ksisig file is created (which by itself is not an issue). However, later it looks like this file is re-used, but it is not checked whether it already contains the magic LOGSIG11 in the beginning of the file. This leads to a log signature file which has correct content but is missing the LOGSIG11 magic in the beginning. - bugfix template processor: missing escaping of backslash in json mode Thanks to github user mostolog for providing the patch. - build environment: --enable-debug now defaults to new "auto" mode previously, DEBUG mode (and thus assert() macros) was disabled by default and explicitly needed to be enabled by providing the --enable-debug ./configure switch. Now, a new --enable-debug=auto mode has been added and made the default. It enables DEBUG mode if we build from git and only disables it when a release build is done (from the release tarball). This aims at better error checking during testbench runs and developer testing. - testbench improvements * improved testbench file generation tool Thanks to Pascal Withopf for the patch. * added some plumbing for extended tests which work by overriding OS APIs * imfile ReopenOnTruncate option is now being tested * the CI environment now runs most tests in debug mode, but some in release mode to cover potential release-mode races * template json option is now being tested * object state persisting received a basic test * added test for empty hostnames * added tests for omprog ------------------------------------------------------------------------------ Version 8.22.0 [v8-stable] 2016-10-04 - ompgsql: add template support Thanks to Radu Gheorghe for implementing this. - generate somewhat better error message on config file syntax error a common case (object at invalid location) has received it's own error message; for the rest we still rely on the generic flex/bison handler - bugfix:omhiredis reconnects after failure previously it could loose messages under such conditions. Thanks to Bob Gregory for the patch. - general cleanup and code improvement mostly guided by compiler warnings induced by newer opensuse buildbot environment ------------------------------------------------------------------------------ Version 8.21.0 [v8-stable] 2016-08-23 - CHANGE OF BEHAVIOR: by default, internal messages are no longer logged via the internal bridge to rsyslog but via the syslog() API call [either directly or via liblogging). For the typical single-rsyslogd-instance installation this is mostly unnoticeable (except for some additional latency). If multiple instances are run, only the "main" (the one processing system log messages) will see all messages. To return to the old behavior, do either of those two: 1) add in rsyslog.conf: global(processInternalMessages="on") 2) export the environment variable RSYSLOG_DFLT_LOG_INTERNAL=1 This will set a new default - the value can still be overwritten via rsyslog.conf (method 1). Note that the environment variable must be set in your **startup script**. For more information, please visit https://www.rsyslog.com/rsyslog-error-reporting-improved/ - slightly improved TLS syslog error messages - queue subsystem: improved robustness The .qi file is now persisted whenever an existing queue file is fully written and a new file is begun. This helps with rsyslog aborts, including the common case where the OS issues kill -9 because of insufficiently configured termination timeout (this is an OS config error, but a frequent one). Also, a situation where an orphaned empty file could be left in the queue work directory has been fixed. We expect that this change causes fewer permanent queue failures. - bugfix: build failed on some platforms due to missing include files ------------------------------------------------------------------------------ Version 8.20.0 [v8-stable] 2016-07-12 - NEW BUILD REQUIREMENT: librelp, was 1.2.5, now is 1.2.12 This is only needed if --enable-relp is used. The new version is needed to support the new timeout parameter in omrelp. - NEW BUILD SUGGESTION: libfastjson 0.99.3 while not strictly necessary, previous versions of libfastjson have a bug in unicode processing that can result in non US-ASCII characters to be improperly encoded and may (very unlikely) also cause a segfault. This version will become mandatory in rsyslog 8.23.0 - omrelp: add configurable connection timeout Thanks to Nathan Brown for implementing this feature. - pmrfc3164: add support for slashes in hostname added parameter "permit.slashesinhostname" to support this, off by default [Note that the RFC5424 always supported this, as 5424 is a different standard] - bugfix omfile: handle chown() failure correctly If the file creation succeeds, but chown() failed, the file was still writen, even if the user requested that this should be treated as a failure case. This is corrected now. Also, some refactoring was done to create better error messages. - omfile now better conveys status of unwritable files back to core - config files recursively including themselves are now detected and an error message is emitted in that case; Previously, this misconfiguration resulted in rsyslog loop and abort during startup. closes https://github.com/rsyslog/rsyslog/issues/1058 - refactored code to not emit compiler warnings in "strict mode" We changed the compiler warning settings to be rather strict and cleaned up the code to work without generating any warning messages. This results in an overall even more improved code quality, which will now also be enforced via our CI systems. - bugfix: fix some issues with action CommitTransaction() handling An action that returns an error from CommitTransaction() caused a loop in rsyslog action processing. Similarly, retry processing was not properly handled in regard to CommitTransaction(). This is a first shot at fixing the situation. It solves the immediate problems, but does not implement the full desired functionality (like error file). see also https://github.com/rsyslog/rsyslog/issues/974 see also https://github.com/rsyslog/rsyslog/issues/500 - bugfix omqmqp1: connecting to the message bus fails on nonstandard port Thanks to Ken Giusti for the patch. see also: https://github.com/rsyslog/rsyslog/pull/1064 - testbench/CI enhancements * new tests for RELP components * new tests for core action processing and retry * travis tests now also run against all unstable versions of supporting libraries. This helps to track interdependency problems early. * new tests for hostname parsing * new tests for RainerScript comparisons ------------------------------------------------------------------------------ Version 8.19.0 [v8-stable] 2016-05-31 - NEW BUILD REQUIREMENT: autoconf-archive - omelasticsearch: add option to permit unsigned certs (experimentally) This adds plumbing as suggested by Joerg Heinemann and Radu Gheorghe, but is otherwise untested. Chances are good it works. If you use it, please let us know your experience and most importantly any bug reports you may have. closes https://github.com/rsyslog/rsyslog/issues/89 - imrelp: better error codes on unavailability of TLS options Most importantly, we will tell the user in clear words if specific TLS options are not available due to too-old GnuTLS. closes https://github.com/rsyslog/rsyslog/issues/1019 - default stack size for inputs has been explicitly set to 4MiB for most platforms, this means a reduction from the default of 10MiB, however it may mean an increase for micro-libc's (some may have as low as 80KiB by default). - testbench: We are now using libfaketime instead of faketime command line tool. Make sure you have installed the library and not just the binary! - refactor stringbuf * use only a single string buffer ... both for the internal representation as well as the C-String one. The module originally tried to support embedded NUL characters, which over time has proven to be not necessary. Rsyslog always encodes NUL into escape sequences. Also, the dual buffers were used inconsistently, which could lead to subtle bugs. With the single buffer, this does no longer happen and we also get some improved performance (should be noticeable) and reduced memory use (a bit). closes https://github.com/rsyslog/rsyslog/issues/1033 * removed no longer used code * internal API changes to reflect new needs * performance improvements * miscellaneous minor cleanup - fix: potential misaddressing in template config processing This could cause segfault on startup. Happens when template name shorter than two chars and outname is not set. Once we are over startup, things work reliably. - bugfix omfile: async output file writing does not respect flushing neither parameter flushInterval nor flushOnTXEnd="on" was respected. closes https://github.com/rsyslog/rsyslog/issues/1054 - bugfix imfile: corrupted multi-line message when state data was persisted see also https://github.com/rsyslog/rsyslog/issues/874 Thanks to Magnus Hyllander for the analysis and a patch suggestion. - bugfix imfile: missing newline after first line of multiline message see also https://github.com/rsyslog/rsyslog/issues/843 Thanks to Magnus Hyllander for the patch. - bugfix: dynstats unusedMetricTtl bug Thanks to Janmejay Singh for fixing this. - bugfix build system: build was broken on SunOS Thanks to Filip Hajny for the patch. - bugfix: afterRun entry point not correctly called The entry point was called at the wrong spot, only when the thread had not already terminated by itself. This could cause various cleanup to not be done. This affected e.g. imjournal. closes https://github.com/rsyslog/rsyslog/issues/882 - bugfix dynstats: do not leak file handles Thanks to Janmejay Singh for the patch. - bugfix omelasticsearch: disable libCURL signal handling previously, this could lead to segfaults on connection timeout see also https://github.com/rsyslog/rsyslog/pull/1007 Thanks to Sai Ke WANG for the patch. - bugfix omelasticsearch: some regressions were fixed * error file was no longer written * fix for some potential misaddressings - improved wording: gnutls error message points to potential cause What GnutTLS returns us is very unspecific and somewhat misleading, so we point to what it most probably is (broken connect). see also https://github.com/rsyslog/rsyslog/issues/846 - some general code improvements * "fixed" cosmetic memory leaks at shutdown - build system bugfix: configure can't find gss_acquire_cred on Solaris Thanks to github user vlmarek for the patch. - improvements to the CI environment * improvements on the non-raciness of some tests * imdiag: avoid races in detecting queue empty status This resolves cases where the testbench terminated rsyslog too early, resulting in potential message loss and test failure. * omkafka has now dynamic tests Thanks to Janmejay Singh for implementing them. * try to merge PR to master and run tests; this guards against cross-PR regressions and wasn't caught previously. Note that we skip this test if we cannot successfully merge. So this is not a replacement for a daily full "all-project integration test run". * travis has finally enabled elasticsearch tests ES was unfortunately not being regularly tested for quite a while due to missing environment. This lead to some regressions becoming undetected. These were now discovered thanks to the new support on travis. Also, this guards against future regressions. * imfile has now additional tests and overall better coverage * omfile has now additional tests ------------------------------------------------------------------------------ Version 8.18.0 [v8-stable] 2016-04-19 - testbench: When running privdrop tests testbench tries to drop user to "rsyslog", "syslog" or "daemon" when running as root and you don't explicit set RSYSLOG_TESTUSER environment variable. Make sure the unprivileged testuser can write into tests/ dir! - templates: add option to convert timestamps to UTC closes https://github.com/rsyslog/rsyslog/issues/730 - omjournal: fix segfault (regression in 8.17.0) - imptcp: added AF_UNIX support Thanks to Nathan Brown for implementing this feature. - new template options * compressSpace * date-utc - redis: support for authentication Thanks to Manohar Ht for the patch - omkafka: makes kafka-producer on-HUP restart optional As of now, omkafka kills and re-creates kafka-producer on HUP. This is not always desirable. This change introduces an action param (reopenOnHup="on|off") which allows user to control re-cycling of kafka-producer. It defaults to on (for backward compatibility). Off allows user to ignore HUP as far as kafka-producer is concerned. Thanks to Janmejay Singh for implementing this feature - imfile: new "FreshStartTail" input parameter Thanks to Curu Wong for implementing this. - omjournal: fix libfastjson API issues This module accessed private data members of libfastjson - ommongodb: fix json API issues This module accessed private data members of libfastjson - testbench improvements (more tests and more thorough tests) among others: - tests for omjournal added - tests for KSI subsystem - tests for privilege drop statements - basic test for RELP with TLS - some previously disabled tests have been re-enabled - dynamic stats subsystem: a couple of smaller changes they also involve the format, which is slightly incompatible to previous version. As this was out only very recently (last version), we considered this as acceptable. Thanks to Janmejay Singh for developing this. - foreach loop: now also iterates over objects (not just arrays) Thanks to Janmejay Singh for developing this. - improvements to the CI environment - enhancement: queue subsystem is more robst in regard to some corruptions It is now detected if a .qi file states that the queue contains more records than there are actually inside the queue files. Previously this resulted in an emergency switch to direct mode, now the problem is only reported but processing continues. - enhancement: Allow rsyslog to bind UDP ports even w/out specific interface being up at the moment. Alternatively, rsyslog could be ordered after networking, however, that might have some negative side effects. Also IP_FREEBIND is recommended by systemd documentation. Thanks to Nirmoy Das and Marius Tomaschewski for the patch. - cleanup: removed no longer needed json-c compatibility layer as we now always use libfastjson, we do not need to support old versions of json-c (libfastjson was based on the newest json-c version at the time of the fork, which is the newest in regard to the compatibility layer) - new External plugin for sending metrics to SPM Monitoring SaaS Thanks to Radu Gheorghe for the patch. - bugfix imfile: fix memory corruption bug when appending @cee Thanks to Brian Knox for the patch. - bugfix: memory misallocation if position.from and position.to is used a negative amount of memory is tried to be allocated if position.from is smaller than the buffer size (at least with json variables). This usually leads to a segfault. closes https://github.com/rsyslog/rsyslog/issues/915 - bugfix: fix potential memleak in TCP allowed sender definition depending on circumstances, a very small leak could happen on each HUP. This was caused by an invalid macro definition which did not rule out side effects. - bugfix: $PrivDropToGroupID actually did a name lookup ... instead of using the provided ID - bugfix: small memory leak in imfile Thanks to Tomas Heinrich for the patch. - bugfix: double free in jsonmesg template There has to be actual json data in the message (from mmjsonparse, mmnormalize, imjournal, ...) to trigger the crash. Thanks to Tomas Heinrich for the patch. - bugfix: incorrect formatting of stats when CEE/Json format is used This lead to ill-formed json being generated - bugfix omfwd: new-style keepalive action parameters did not work due to being inconsistently spelled inside the code. Note that legacy parameters $keepalive... always worked see also: https://github.com/rsyslog/rsyslog/issues/916 Thanks to Devin Christensen for alerting us and an analysis of the root cause. - bugfix: memory leaks in logctl utility Detected by clang static analyzer. Note that these leaks CAN happen in practice and may even be pretty large. This was probably never detected because the tool is not often used. - bugfix omrelp: fix segfault if no port action parameter was given closes https://github.com/rsyslog/rsyslog/issues/911 - bugfix imtcp: Messages not terminated by a NL were discarded ... upon connection termination. Thanks to Tomas Heinrich for the patch. ------------------------------------------------------------------------------ Version 8.17.0 [v8-stable] 2016-03-08 - NEW REQUIREMENT: libfastjson see also: http://blog.gerhards.net/2015/12/rsyslog-and-liblognorm-will-switch-to.html - new testbench requirement: faketime command line tool This is used to generate a controlled environment for time-based tests; if not available, tests will gracefully be skipped. - improve json variable performance We use libfastjson's alternative hash function, which has been proven to be much faster than the default one (which stems back to libjson-c). This should bring an overall performance improvement for all operations involving variable processing. closes https://github.com/rsyslog/rsyslog/issues/848 - new experimental feature: lookup table support Note that at this time, this is an experimental feature which is not yet fully supported by the rsyslog team. It is introduced in order to gain more feedback and to make it available as early as possible because many people consider it useful. Thanks to Janmejay Singh for implementing this feature - new feature: dynamic statistics counters which may be changed during rule processing Thanks to Janmejay Singh for suggesting and implementing this feature - new contributed plugin: omamqp1 for AMQP 1.0-compliant brokers Thanks to Ken Giusti for this module - new set of UTC-based $now family of variables ($now-utc, $year-utc, ...) - simplified locking when accessing message and local variables this simplifies the code and slightly increases performance if such variables are heavily accessed. - new global parameter "debug.unloadModules" This permits to disable unloading of modules, e.g. to make valgrind reports more useful (without a need to recompile). - timestamp handling: guard against invalid dates We do not permit dates outside of the year 1970..2100 interval. Note that network-receivers do already guard against this, so the new guard only guards against invalid system time. - imfile: add "trimlineoverbytes" input parameter Thanks to github user JindongChen for the patch. - ommongodb: add support for extended json format for dates Thanks to Florian Bücklers for the patch. - omjournal: add support for templates see also: https://github.com/rsyslog/rsyslog/pull/770 Thanks to github user bobthemighty for the patch - imuxsock: add "ruleset" input parameter - testbench: framework improvement: configs can be included in test file they do no longer need to be in a separate file, which saves a bit of work when working with them. This is supported for simple tests with a single running rsyslog instance Thanks to Janmejay Singh for inspiring me with a similar method in liblognorm testbench. - imptcp: performance improvements Thanks to Janmejay Singh for implementing this improvement - made build compile (almost) without warnings still some warnings are suppressed where this is currently required - improve interface definition in some modules, e.g. mmanon, mmsequence This is more an internal cleanup and should have no actual affect to the end user. - solaris build: MAXHOSTNAMELEN properly detected - build system improvement: ability to detect old hiredis libs This permits to automatically build omhiredis on systems where the hiredis libs do not provide a pkgconfig file. Previously, this required manual configuration. Thanks to github user jaymell for the patch. - rsgtutil: dump mode improvements * auto-detect signature file type * ability to dump hash chains for log extraction files - build system: fix build issues with clang clang builds often failed with a missing external symbol "rpl_malloc". This was caused by checks in configure.ac, which checked for specific GNU semantics. As we do not need them (we never ask malloc for zero bytes), we can safely remove the macros. Note that we routinely run clang static analyzer in CI and it also detects such calls as invalid. closes https://github.com/rsyslog/rsyslog/issues/834 - bugfix: unixtimestamp date format was incorrectly computed The problem happened in leap year from March til then end of year and healed itself at the beginning of the next year. During the problem period, the timestamp was 24 hours too low. fixes https://github.com/rsyslog/rsyslog/issues/830 - bugfix: date-ordinal date format was incorrectly computed same root cause aus for unixtimestamp and same triggering condition. During the affected perido, the ordinal was one too less. - bugfix: some race when shutting down input module threads this had little, if at all, effect on real deployments as it resulted in a small leak right before rsyslog termination. However, it caused trouble with the testbench (and other QA tools). Thanks to Peter Portante for the patch and both Peter and Janmejay Singh for helping to analyze what was going on. - bugfix tcpflood: did not handle connection drops correct in TLS case note that tcpflood is a testbench too. The bug caused some testbench instability, but had no effect on deployments. - bugfix: abort if global parameter value was wrong If so, the abort happened during startup. Once started, all was stable. - bugfix omkafka: fix potential NULL pointer addressing this happened when the topic cache was full and an entry needed to be evicted - bugfix impstats: @cee cookie was prefixed to wrong format (json vs. cee) Thanks to Volker Fröhlich for the fix. - bugfix imfile: fix race during startup that could lead to some duplication If a to-be-monitored file was created after inotify was initialized but before startup was completed, the first chunk of data from this file could be duplicated. This should have happened very rarely in practice, but caused occasional testbench failures. see also: https://github.com/rsyslog/rsyslog/issues/791 - bugfix: potential loss of single message at queue shutdown see also: https://github.com/rsyslog/rsyslog/issues/262 - bugfix: potential deadlock with heavy variable access When making heavy use of global, local and message variables, a deadlock could occur. While it is extremely unlikely to happen, we have at least seen one incarnation of this problem in practice. - bugfix ommysql: on some platforms, serverport parameter had no effect This was caused by an invalid code sequence which's outcome depends on compiler settings. - bugfix omelasticsearch: invalid pointer dereference The actual practical impact is not clear. This came up when working on compiler warnings. Thanks to David Lang for the patch. - bugfix omhiredis: serverport config parameter did not reliably work depended on environment/compiler used to build - bugfix rsgtutil: -h command line option did not work Thanks to Henri Lakk for the patch. - bugfix lexer: hex numbers were not properly represented see: https://github.com/rsyslog/rsyslog/pull/771 Thanks to Sam Hanes for the patch. - bugfix TLS syslog: intermittent errors while sending data Regression from commit 1394e0b. A symptom often seen was the message "unexpected GnuTLS error -50 in nsd_gtls.c:530" - bugfix imfile: abort on startup if no slash was present in file name param Thanks to Brian Knox for the patch. - bugfix rsgtutil: fixed abort when using short command line options Thanks to Henri Lakk - bugfix rsgtutil: invalid computation of log record extraction file This caused verification to fail because the hash chain was actually incorrect. Depended on the input data set. closes https://github.com/rsyslog/rsyslog/issues/832 - bugfix build system: KSI components could only be build if in default path ------------------------------------------------------------------------------ Version 8.16.0 [v8-stable] 2016-01-26 - rsgtutil: Added extraction support including loglines and hash chains. More details on how to extract loglines can be found in the rsgtutil manpage. See also: https://github.com/rsyslog/rsyslog/issues/561 - clean up doAction output module interface We started with char * pointers, but used different types of pointers over time. This lead to alignment warnings. In practice, I think this should never cause any problems (at least there have been no reports in the 7 or so years we do this), but it is not clean. The interface is now cleaned up. We do this in a way that does not require modifications to modules that just use string parameters. For those with message parameters, have a look at e.g. mmutf8fix to see how easy the required change is. - new system properties for $NOW properties based on UTC This permits to express current system time in UTC. See also https://github.com/rsyslog/rsyslog/issues/729 - impstats: support broken ElasticSearch JSON implementation ES 2.0 no longer supports valid JSON and disallows dots inside names. This adds a new "json-elasticsearch" format option which replaces those dots by the bang ("!") character. So "discarded.full" becomes "discarded!full". This is a workaround. A method that will provide more control over replacements will be implemented some time in the future. For details, see below-quoted issue tracker. closes https://github.com/rsyslog/rsyslog/issues/713 - omelasticsearch: craft better URLs Elasticsearch is confused by url's ending in a bare '?' or '&'. While this is valid, those are no longer produced. Thanks to Benno Evers for the patch. - imfile: add experimental "reopenOnTruncate" parameter Thanks to Matthew Wang for the patch. - bugfix imfile: proper handling of inotify initialization failure Thanks to Zachary Zhao for the patch. - bugfix imfile: potential segfault due to improper handling of ev var This occurs in inotify mode, only. Thanks to Zachary Zhao and Peter Portante for the patch. closes https://github.com/rsyslog/rsyslog/issues/718 - bugfix imfile: potential segfault under heavy load. This occurs in inotify mode when using wildcards, only. The root cause is dropped IN_IGNORED inotify events which be dropped in circumstance of high input pressure and frequent rotation, and according to wikipeida, they can also be dropped in other conditions. Thanks to Zachary Zhao for the patch. closes https://github.com/rsyslog/rsyslog/issues/723 - bugfix ommail: invalid handling of server response if that response was split into different read calls. Could lead to error-termination of send operation. Problem is pretty unlikely to occur in standard setups (requires slow connection to SMTP server). Thank to github user haixingood for the patch. - bugfix omelasticsearch: custom serverport was ignored on some platforms Thanks to Benno Evers for the patch. - bugfix: tarball did not include some testbench files Thanks to Thomas D. (whissi) for the patch. - bugfix: memory misaddressing during config parsing string template This occurred if an (invalid) template option larger than 63 characters was given. Thanks to git hub user c6226 for the patch. - bugfix imzmq: memory leak Thanks to Jeremy Liang for the patch. - bugfix imzmq: memory leak Thanks to github user xushengping for the patch. - bugfix omzmq: memory leak Thanks to Jack Lin for the patch. - some code improvement and cleanup ------------------------------------------------------------------------------ Version 8.15.0 [v8-stable] 2015-12-15 - KSI Lib: Updated code to run with libksi 3.4.0.5 Also libksi 3.4.0.x is required to build rsyslog if ksi support is enabled. New libpackages have been build as well. - KSI utilities: Added option to ser publication url. Since libksi 3.4.0.x, there is no default publication url anymore. The publication url has to be set using the --publications-server Parameter, otherwise the ksi signature cannot be verified. UserID and UserKey can also be set by parameter now. Closes https://github.com/rsyslog/rsyslog/issues/581 - KSI Lib: Fixed wrong TLV container for KSI signatures from 0905 to 0906. closes https://github.com/rsyslog/rsyslog/issues/587 - KSI/GT Lib: Fixed multiple issues found using static analyzer - performance improvement for configs with heavy use of JSON variables Depending on the config, this can be a very big gain in performance. - added pmpanngfw: contributed module for translating Palo Alto Networks logs. see also: https://github.com/rsyslog/rsyslog/pull/573 Thanks to Luigi Mori for the contribution. - testbench: Changed valgrind option for imtcp-tls-basic-vg.sh For details see: https://github.com/rsyslog/rsyslog/pull/569 - pmciscoios: support for asterisk before timestamp added thanks to github user c0by for the patch see also: https://github.com/rsyslog/rsyslog/pull/583 - solr external output plugin much enhanced see also: https://github.com/rsyslog/rsyslog/pull/529 Thanks to Radu Gheorghe for the patch. - omrabbitmq: improvements thanks to Luigi Mori for the patch see also: https://github.com/rsyslog/rsyslog/pull/580 - add support for libfastjson (as a replacement for json-c) - KSI utilities: somewhat improved error messages Thanks to Henri Lakk for the patch. see also: https://github.com/rsyslog/rsyslog/pull/588 - pmciscoios: support for some format variations Thanks to github user c0by for the patch - support grok via new contributed module mmgrok Thanks to 饶琛琳 (github user chenryn) for the contribution. - omkafka: new statistics counter "maxoutqsize" Thanks to 饶琛琳 (github user chenryn) for the contribution. - improvements for 0mq modules: * omczmq - suspend / Retry handling - the output plugin can now recover from some error states due to issues with plugin startup or message sending * omczmq - refactored topic handling code for ZMQ_PUB output to be a little more efficient * omczmq - added ability to set a timeout for sends * omczmq - set topics can be in separate frame (default) or part of message frame (configurable) * omczmq - code cleanup * imczmq - code cleanup * imczmq - fixed a couple of cases where vars could be used uninitialized * imczmq - ZMQ_ROUTER support * imczmq - Fix small memory leak from not freeing sockets when done with them * allow creation of on demand ephemeral CurveZMQ certs for encryption. Clients may specify clientcertpath="*" to indicate they want an on demand generated cert. Thanks to Brian Knox for the contributions. - cleanup on code to unset a variable under extreme cases (very, very unlikely), the old code could also lead to erroneous processing - omelasticsearch: build on FreeBSD Thanks to github user c0by for the patch - pmciscoios: fix some small issues clang static analyzer detected - testbench: many improvements and some new tests note that there still is a number of tests which are somewhat racy - overall code improvements thanks to clang static analyzer - gnutls fix: Added possible fix for gnutls issue #575 see also: https://github.com/rsyslog/rsyslog/issues/575 Thanks to Charles Southerland for the patch - bugfix omkafka: restore ability to build on all platforms Undo commit aea09800643343ab8b6aa205b0f10a4be676643b because that lead to build failures on various important platforms. This means it currently is not possible to configure the location of librdkafka, but that will affect far fewer people. closes: https://github.com/rsyslog/rsyslog/issues/596 - bugfix omkafka: fix potentially negative partition number Thanks to Tait Clarridge for providing a patch. - bugfix: solve potential race in creation of additional action workers Under extreme circumstances, this could lead to segfault. Note that we detected this problem thanks to ASAN address sanitizer in combination with a very extreme testbench test. We do not think that this issue was ever reported in practice. - bugfix: potential memory leak in config parsing Thanks to github user linmujia for the patch - bugfix: small memory leak in loading template config This happened when a plugin was used inside the template. Then, the memory for the template name was never freed. Thanks to github user xushengping for the fix. - bugfix: fix extra whitespace in property expansions Address off-by-one issues introduced in f3bd7a2 resulting in extra whitespace in property expansions Thanks to Matthew Gabeler-Lee for the patch. - bugfix: mmfields leaked memory if very large messages were processed detected by clang static analyzer - bugfix: mmfields could add garbage data to field this happened when very large fields were to be processed. Thanks to Peter Portante for reporting this. - bugfix: omhttpfs now also compiles with older json-c lib - bugfix: memory leak in (contributed) module omhttpfs Thanks to git hub user c6226 for the patch. - bugfix: parameter mismatch in error message for wrap() function - bugfix: parameter mismatch in error message for random() function - bugfix: divide by zero if max() function was provided zero - bugfix: invalid mutex handling in omfile async write mode could lead to segfault, even though highly unlikely (caught by testbench on a single platform) - bugfix: fix inconsistent number processing Unfortunately, previous versions of the rule engine tried to support oct and hex, but that wasn't really the case. Everything based on JSON was just dec-converted. As this was/is the norm, we fix that inconsistency by always using dec. Luckily, oct and hex support was never documented and could probably only have been activated by constant numbers. - bugfix: timezone() object: fix NULL pointer dereference This happened during startup when the offset or id parameter was not given. Could lead to a segfault at startup. Detected by clang static analyzer. - bugfix omfile: memory addressing error if very long outchannel name used Thanks to github user c6226 for the patch. ------------------------------------------------------------------------------ Version 8.14.0 [v8-stable] 2015-11-03 - Added possibility to customize librdkafka location see also: https://github.com/rsyslog/rsyslog/pull/502 Thanks to Matthew Wang for the patch. - add property "rawmsg-after-pri" - bugfix: potential misaddresseing in imfile Could happen when wildcards were used. see also https://github.com/rsyslog/rsyslog/issues/532 see also https://github.com/rsyslog/rsyslog/issues/534 Thanks to zhangdaoling for the bugfix. - bugfix: re_extract RainerScript function did not work Thanks to Janmejay Singh for the patch ------------------------------------------------------------------------------ Version 8.13.0 [v8-stable] 2015-09-22 - ZeroMQ enhancements: * Added the ability to set a static publishing topic per action as an alternative to constructing topics with templates Contributor: Luca Bocassi * ZMQ_PUB socket now defaults to bind and ZMQ_SUB socket now defaults to connect - Contributor: Luca Bocassi - Redis enhancements: * Can now LPUSH to a Redis list in "queue" mode - Contributor: Brian Knox * Can now PUBLISH to a Redis channel in "publish" mode Contributor: Brian Knox - build requirement for rsyslog/mmnormalize is now liblognorm 1.1.2 or above - mmnormalize: liblognorm error messages are now emitted via regular rsyslog error reporting mechanism (aka "are now logged") This is possible due to a new API in liblognorm 1.1.2; Note that the amount of error messages depends on the version of liblognorm used. - add support for TCP client side keep-alives Thanks to github user tinselcity for the patch. - bugfix: imtcp/TLS hangs on dropped packets see also https://github.com/rsyslog/rsyslog/issues/318 Thanks to github user tinselcity for the patch. - bugfix testbench: some tests using imptcp are run if module is disabled Thanks to Michael Biebl for reporting this see also https://github.com/rsyslog/rsyslog/issues/524 - bugfix omkafka: Fixes a bug not accepting new messages anymore. see also: https://github.com/rsyslog/rsyslog/pull/472 Thanks to Janmejay Singh - bugfix: Parallel build issue "cannot find ../runtime/.libs/librsyslog.a: No such file or directory" (#479) fixed. Thanks to Thomas D. (Whissi) for the patch. - bugfix: Added missing mmpstrucdata testfiles into makefile. see also: https://github.com/rsyslog/rsyslog/issues/484 - bugfix: Reverted FIX for issue #392 as it had unexpected side effects. The new fix duplicates the Listener object for static files (like done for dynamic files already), resolving issue #392 and #490. see also https://github.com/rsyslog/rsyslog/pull/490 - bugfix: issues in queue subsystem if syncqueuefiles was enabled * Error 14 was generated on the .qi file directory handle. As the .qi filestream does not have a directory set, fsync was called on an empty directory causing a error 14 in debug log. * When queue files existed on startup, the bSyncQueueFiles strm property was not set to 1. This is now done in the qqueueLoadPersStrmInfoFixup function. - bugfix/testbench: tcpflood tool could abort when random data was added see also: https://github.com/rsyslog/rsyslog/issues/506 Thanks to Louis Bouchard for the fix - rscryutil: Added support to decrypt a not closed log file. Thanks to wizard1024 for the patch. ------------------------------------------------------------------------------ Version 8.12.0 [v8-stable] 2015-08-11 - Harmonize resetConfigVariables values and defaults see also https://github.com/rsyslog/rsyslog/pull/413 Thanks to Tomas Heinrich for the patch. - GT/KSI: fix some issues in signature file format and add conversion tool The file format is incompatible to previous format, but tools have been upgraded to handle both and also an option been added to convert from old to new format. - bugfix: ommysql did not work when gnutls was enabled as it turned out, this was due to a check for GnuTLS functions with the side-effect that AC_CHECK_LIB, by default, adds the lib to LIBS, if there is no explicit action, what was the case here. So everything was now linked against GnuTLS, which in turn made ommysql fail. Thanks to Thomas D. (whissi) for the analysis of the ommysql/gnutls problem and Thomas Heinrich for pointing out that AC_CHECK_LIB might be the culprit. - bugfix omfile: potential memory leak on file close see also: https://github.com/rsyslog/rsyslog/pull/423 Thanks to Robert Schiele for the patch. - bugfix omfile: potential race in dynafile detection/creation This could lead to a segfault. Thanks to Tomas Heinrich for the patch. - bugfix omfile: Fix race-condition detection in path-creation code The affected code is used to detect a race condition in between testing for the existence of a directory and creating it if it didn't exist. The variable tracking the number of attempts wasn't reset for subsequent elements in the path, thus limiting the number of reattempts to one per the whole path, instead of one per each path element. This solution was provided by Martin Poole. - bugfix parser subsystem: potential misaddressing in SanitizeMsg() could lead to a segfault Thanks to Tomas Heinrich for the patch. - imfile: files moved outside of directory are now (properly) handled - bugfix: imfile: segfault when using startmsg.regex if first log line doesn't match Thanks to Ciprian Hacman for the patch. - bugfix imfile: file table was corrupted when on file deletion This could happen when a file that was statically configured (not via an wildcard) was deleted. - bugfix ompgsql: transaction were improperly handled now transaction support is solidly disabled until we have enough requests to implement it again. Module still works fine in single insert mode. closes https://github.com/rsyslog/rsyslog/issues/399 - bugfix mmjsonparse: memory leak if non-cee-json message is processed see also https://github.com/rsyslog/rsyslog/pull/383 Thanks to Anton Matveenko for the patch - testbench: remove raciness from UDP based tests - testbench: added bash into all scripts making it mandatory - bugfix testbench: Fixed problem building syslog_caller util when liblogging-stdlog is not available. Thanks to Louis Bouchard for the patch - bugfix rscryutil.1: Added fix checking for generate_man_pages condition Thanks to Radovan Sroka for the patch - bugfix freebsd console: \n (NL) is prepended with \r (CR) in console output on freebsd only. For more details see here: https://github.com/rsyslog/rsyslog/issues/372 Thanks to AlexandreFenyo for the patch ------------------------------------------------------------------------------ Version 8.11.0 [v8-stable] 2015-06-30 - new signature provider for Keyless Signature Infrastructure (KSI) added - build system: re-enable use of "make distcheck" - add new signature provider for Kesless Signature Infrastructure (KSI) This has also been added to existing tooling; KSI is kind of v2 of the Guardtime functionality and has been added in the appropriate places. - bugfix imfile: regex multiline mode ignored escapeLF option Thanks to Ciprian Hacman for reporting the problem closes https://github.com/rsyslog/rsyslog/issues/370 - bugfix omkafka: fixed several concurrency issues, most of them related to dynamic topics. Thanks to Janmejay Singh for the patch. - bugfix: execonlywhenpreviousissuspended did not work correctly This especially caused problems when an action with this attribute was configured with an action queue. - bugfix core engine: ensured global variable atomicity This could lead to problems in RainerScript, as well as probably in other areas where global variables are used inside rsyslog. I wouldn't outrule it could lead to segfaults. Thanks to Janmejay Singh for the patch. - bugfix imfile: segfault when using startmsg.regex because of empty log line closes https://github.com/rsyslog/rsyslog/issues/357 Thanks to Ciprian Hacman for the patch. - bugfix: build problem on Solaris Thanks to Dagobert Michelsen for reporting this and getting us up to speed on the openCWS build farm. - bugfix: build system strndup was used even if not present now added compatibility function. This came up on Solaris builds. Thanks to Dagobert Michelsen for reporting the problem. closes https://github.com/rsyslog/rsyslog/issues/347 - bugfix imjournal: do not pass empty messages to rsyslog core this causes a crash of the daemon see also https://github.com/rsyslog/rsyslog/pull/412 Thanks to Tomas Heinrich for the patch. - bugfix imjournal: cosmetic memory leak very small and an shutdown only, so did not affect operations see also https://github.com/rsyslog/rsyslog/pull/411 Thanks to Tomas Heinrich for the patch. ------------------------------------------------------------------------------ Version 8.10.0 [v8-stable] 2015-05-19 - imfile: add capability to process multi-line messages based on regex input parameter "endmsg.regex" was added for that purpose. The new mode provides much more power in processing different multiline-formats. - pmrfc3164: add new parameters * "detect.yearAfterTimestamp" This supports timestamps as generated e.g. by some Aruba Networks equipment. * "permit.squareBracesInHostname" Permits to use "hostnames" in the form of "[127.0.0.1]"; also seen in Aruba Networks equipment, but we strongly assume this can also happen in other cases, especially with IPv6. - supplementary groups are now set when dropping privileges closes https://github.com/rsyslog/rsyslog/issues/296 Thanks to Zach Lisinski for the patch. - imfile: added brace glob expansion to wildcard Thanks to Zach Lisinski for the patch. - zmq: add the ability for zeromq input and outputs to advertise their presence on UDP via the zbeacon API. Thanks to Brian Knox for the contribution. - added omhttpfs: contributed module for writing to HDFS via HTTP Thanks to sskaje for the contribution. - Configure option "--disable-debug-symbols" added which is disabled per default. If you set the new option, configure won't set the appropriate compiler flag to generate debug symbols anymore. - When building from git source we now require rst2man and yacc (or a replacement like bison). That isn't any new requirement, we only added missing configure checks. - Configure option "--enable-generate-man-pages" is now disabled for non git source builds per default but enforced when building from git source. - mmpstrucdata: some code cleanup removed lots of early development debug outputs - bugfix imuxsock: fix a memory leak that happened with large messages ... when annotation was enabled. Thanks to github user c6226 for the patch - bugfix omhttpfs: memory leak Thanks to github user c6226 for the patch - bugfix imuxsock: fix a crash when setting a hostname Setting a hostname via the legacy directive would lead to a crash during shutdown caused by a double-free. Thanks to Tomas Heinrich for the patch. - bugfix: memory leak in mmpstrucdata Thanks to Grégoire Seux for reporting this issue. closes https://github.com/rsyslog/rsyslog/issues/310 - bugfix (minor): default action name: assigned number was one off see also https://github.com/rsyslog/rsyslog/pull/340 Thanks to Tomas Heinrich for the patch. - bugfix: memory leak in imfile A small leak happened each time a new file was monitored based on a wildcard. Depending on the rate of file creation, this could result in a serious memory leak. ------------------------------------------------------------------------------ Version 8.9.0 [v8-stable] 2015-04-07 - omprog: add option "hup.forward" to forwards HUP to external plugins This was suggested by David Lang so that external plugins (and other programs) can also do HUP-specific processing. The default is not to forward HUP, so no change of behavior by default. - imuxsock: added capability to use regular parser chain Previously, this was a fixed format, that was known to be spoken on the system log socket. This also adds new parameters: - sysSock.useSpecialParser module parameter - sysSock.parseHostname module parameter - useSpecialParser input parameter - parseHostname input parameter - 0mq: improvements in input and output modules See module READMEs, part is to be considered experimental. Thanks to Brian Knox for the contribution. - imtcp: add support for ip based bind for imtcp -> param "address" Thanks to github user crackytsi for the patch. - bugfix: MsgDeserialize out of sync with MsgSerialize for StrucData This lead to failure of disk queue processing when structured data was present. Thanks to github user adrush for the fix. - bugfix imfile: partial data loss, especially in readMode != 0 closes https://github.com/rsyslog/rsyslog/issues/144 - bugfix: potential large memory consumption with failed actions see also https://github.com/rsyslog/rsyslog/issues/253 - bugfix: omudpspoof: invalid default send template in RainerScript format The file format template was used, which obviously does not work for forwarding. Thanks to Christopher Racky for alerting us. closes https://github.com/rsyslog/rsyslog/issues/268 - bugfix: size-based legacy config statements did not work properly on some platforms, they were incorrectly handled, resulting in all sorts of "interesting" effects (up to segfault on startup) - build system: added option --without-valgrind-testbench ... which provides the capability to either enforce or turn off valgrind use inside the testbench. Thanks to whissi for the patch. - rsyslogd: fix misleading typos in error messages Thanks to Ansgar Püster for the fixes. ------------------------------------------------------------------------------ Version 8.8.0 [v8-stable] 2015-02-24 - omkafka: add support for dynamic topics and auto partitioning Thanks to Tait Clarridge for the patches. - imtcp/imptcp: support for broken Cisco ASA TCP syslog framing - omfwd: more detailed error messages in case of UDP send error - TLS syslog: enable capability to turn on GnuTLS debug logging This provides better diagnostics in hard-to-diagnose cases, especially when GnuTLS is extra-picky about certificates. - bugfix: $AbortOnUncleanConfig did not work - improve rsyslogd -v output and error message with meta information version number is now contained in error message and build platform in version output. This helps to gets rid of the usual "which version" question on mailing list, support forums, etc... - bugfix imtcp: octet-counted framing cannot be turned off - bugfix: build problems on Illuminos Thanks to Andrew Stormont for the patch - bugfix: invalid data size for iMaxLine global property It was defined as int, but inside the config system it was declared as size type, which uses int64_t. With legacy config statements, this could lead to misaddressing, which usually meant the another config variable was overwritten (depending on memory layout). closes https://github.com/rsyslog/rsyslog/issues/205 - bugfix: negative values for maxMessageSize global parameter were permitted ------------------------------------------------------------------------------ Version 8.7.0 [v8-stable] 2015-01-13 - add message metadata "system" to msg object this permits to store metadata alongside the message - imfile: add support for "filename" metadata this is useful in cases where wildcards are used - imptcp: make stats counter names consistent with what imudp, imtcp uses - added new module "omkafka" to support writing to Apache Kafka - omfwd: add new "udp.senddelay" parameter - mmnormalize enhancements Thanks to Janmejay Singh for the patch. - RainerScript "foreach" iterator and array reading support Thanks to Janmejay Singh for the patch. - now requires liblognorm >= 1.0.2 - add support for systemd >= 209 library names - BSD "ntp" facility (value 12) is now also supported in filter Thanks to Douglas K. Rand of Iteris, Inc. for the patch. Note: this patch was released under ASL 2.0 (see email-conversation). - bugfix: global(localHostName="xxx") was not respected in all modules - bugfix: emit correct error message on config-file-not-found closes https://github.com/rsyslog/rsyslog/issues/173 - bugfix: impstats emitted invalid JSON format (if JSON was selected) - bugfix: (small) memory leak in omfile's outchannel code Thanks to Koral Ilgun for reporting this issue. - bugfix: imuxsock did not deactivate some code not supported by platform Among potential other problems, this caused build failure under Solaris. Note that this build problem just made a broader problem appear that so far always existed but was not visible. closes https://github.com/rsyslog/rsyslog/issues/185 ------------------------------------------------------------------------------ Version 8.6.0 [v8-stable] 2014-12-02 NOTE: This version also incorporates all changes and enhancements made for v8.5.0, but in a stable release. For details see immediately below. - configuration-setting rsyslogd command line options deprecated For most of them, there are now proper configuration objects. Some few will be completely dropped if nobody insists on them. Additional info at http://blog.gerhards.net/2014/11/phasing-out-legacy-command-line-options.html - new and enhanced plugins for 0mq. These are currently experimental. Thanks to Brian Knox who contributed the modules and is their author. - empty rulesets have been permitted. They no longer raise a syntax error. - add parameter -N3 to enable config check of partial config file Use for config include files. Disables checking if any action exists at all. - rsyslogd -e option has finally been removed It is deprecated since many years. - testbench improvements Testbench is now more robust and has additional tests. - testbench is now by default disabled To enable it, use --enable-testbench. This was done as the testbench now does better checking if required modules are present and this in turn would lead to configure error messages where non previously were if we would leave --enable-testbench on by default. Thus we have turned it off. This should not be an issue for those few testbench users. - add new RainerScript functions warp() and replace() Thanks to Singh Janmejay for the patch. - mmnormalize can now also work on a variable Thanks to Singh Janmejay for the patch. - new property date options for day ordinal and week number Thanks to github user arrjay for the patch - remove --enable-zlib configure option, we always require it It's hard to envision a system without zlib, so we turn this off closes https://github.com/rsyslog/rsyslog/issues/76 - slight source-tree restructuring: contributed modules are now in their own ./contrib directory. The idea is to make it clearer to the end user which plugins are supported by the rsyslog project (those in ./plugins). - bugfix: imudp makes rsyslog hang on shutdown when more than 1 thread used closes https://github.com/rsyslog/rsyslog/issues/126 - bugfix: not all files closed on auto-backgrounding startup This could happen when not running under systemd. Some low-numbered fds were not closed in that case. - bugfix: typo in queue configuration parameter made parameter unusable Thanks to Bojan Smojver for the patch. - bugfix: uninitialized buffer off-by-one error in hostname generation The DNS cache used uninitialized memory, which could lead to invalid hostname generation. Thanks to Jarrod Sayers for alerting us and providing analysis and patch recommendations. - bugfix imuxsock: possible segfault when SysSock.Use="off" Thanks to alexjfisher for reporting this issue. closes https://github.com/rsyslog/rsyslog/issues/140 - bugfix: RainerScript: invalid ruleset names were accepted during ruleset definition, but could of course not be used when e.g. calling a ruleset. IMPORTANT: this may cause existing configurations to error out on start, as they invalid names could also be used e.g. when assigning rulesets. - bugfix: some module entry points were not called for all modules callbacks like endCnfLoad() were primarily being called for input modules. This has been corrected. Note that this bugfix has some regression potential. - bugfix omlibdbi: connection was taken down in wrong thread this could have consequences depending on the driver being used. In general, it looks more like a cosmetic issue. For example, with MySQL it lead to a small memory but also an annoying message about a thread not properly torn down. - imttcp was removed because it was an incomplete experimental module - pmrfc3164sd because it was a custom module nobody used We used to keep this as a sample inside the tree, but whoever wants to look at it can check in older versions inside git. - omoracle was removed because it was orphaned and did not build/work for quite some years and nobody was interested in fixing it --------------------------------------------------------------------------- Version 8.5.0 [v8-stable] 2014-10-24 - imfile greatly refactored and support for wildcards added - PRI-handling code refactored for more clarity and robustness - ommail: add support for RainerScript config system [action() object] This finally adds support for the new config style. Also, we now permit to set a constant subject text without the need to create a template for it. - refactored the auto-backgrounding method The code is now more robust and also offers possibilities for enhanced error reporting in the future. This is also assumed to fix some races where a system startup script hang due to "hanging" rsyslogd. - make gntls tcp syslog driver emit more error messages Messages previously emitted only to the debug log are now emitted as syslog error messages. It has shown that they contain information helpful to the user for troubleshooting config issues. Note that this change is a bit experimental, as we are not sure if there are situations where large amounts of error messages may be emitted. - bugfix: imfile did not complain if configured file did not exist closes https://github.com/rsyslog/rsyslog/issues/137 - bugfix: build failure on systems which don't have json_tokener_errors Older versions of json-c need to use a different API (which don't exists on newer versions, unfortunately...) Thanks to Thomas D. for reporting this problem. - imgssapi: log remote peer address in some error messages Thanks to Bodik for the patch. --------------------------------------------------------------------------- Version 8.4.3 [v8-stable] 2014-10-?? - ommail: minor bugfixes & improvements * timestamps were 1 hour out when using daylight saving times when viewing emails in most email clients due to incorrect date format * X-Mailer header had a typo in it * To: header was duplicated once per recipient (this is permitted, but an address list is a better choice nowadays) Thanks to github user cacheus for the patches. - bugfix imkmsg: infinite loop on OpenVZ VMs Thanks to github user PaulSD for the patch closes https://github.com/rsyslog/rsyslog/pull/138 - bugfix: typo in queue configuration parameter made parameter unusable Thanks to Bojan Smojver for the patch. - bugfix: uninitialized buffer off-by-one error in hostname generation The DNS cache used uninitialized memory, which could lead to invalid hostname generation. Thanks to Jarrod Sayers for alerting us and providing analysis and patch recommendations. - bugfix imfile: segfault on startup in "inotify" mode A segfault happened when more than one file was monitored. - bugfix imfile: could make rsyslog exit in inotify mode - bugfix: rsgtutil sometimes crashed in verify mode if file did not exist - bugfix imklog: pri was miscalculated actually, the pri was totally off the real value for PRIs > 9 - bugfix imfile:file processing in inotify mode was stalled sometimes closes https://github.com/rsyslog/rsyslog/issues/134 - bugfix: imjournal did not build properly The build succeeded, but the module did not load due to a type in a support function name, which kept unresolved during load. - bugfix: mmcount did no longer build note that this is untested -- users of this module should file a bug if the new (trivial) code is broken [if there are any users, thus I did not invest time in testing...] closes https://github.com/rsyslog/rsyslog/issues/129 - bugfix imuxsock: possible segfault when SysSock.Use="off" Thanks to alexjfisher for reporting this issue. closes https://github.com/rsyslog/rsyslog/issues/140 --------------------------------------------------------------------------- Version 8.4.2 [v8-stable] 2014-10-02 - bugfix: the fix for CVE-2014-3634 did not handle all cases This is corrected now. see also: CVE-2014-3683 - fixed a build problem on some platforms Thanks to Olaf for the patch - behavior change: "msg" of messages with invalid PRI set to "rawmsg" When the PRI is invalid, the rest of the header cannot be valid. So we move all of it to MSG and do not try to parse it out. Note that this is not directly related to the security issue but rather done because it makes most sense. --------------------------------------------------------------------------- Version 8.4.1 [v8-stable] 2014-09-30 - imudp: add for bracketing mode, which makes parsing stats easier - permit at-sign in variable names closes: https://github.com/rsyslog/rsyslog/issues/110 - bugfix: fix syntax error in anon_cc_numbers.py script Thanks to github user anthcourtney for the patch. closes: https://github.com/rsyslog/rsyslog/issues/109 - bugfix: ompgsql: don't loose uncommitted data on retry Thanks to Jared Johnson and Axel Rau for the patch. - bugfix: imfile: if a state file for a different file name was set, that different file (name) was monitored instead of the configured one. Now, the state file is deleted and the correct file monitored. closes: https://github.com/rsyslog/rsyslog/issues/103 - bugfix: omudpspoof: source port was invalid Thanks to Pavel Levshin for the patch - bugfix: build failure on systems which don't have json_tokener_errors Older versions of json-c need to use a different API (which don't exists on newer versions, unfortunately...) Thanks to Thomas D. for reporting this problem. - bugfix: omelasticsearch does not work with broken/changed ES 1.0+ API closes: https://github.com/rsyslog/rsyslog/issues/104 - bugfix: mmanon did not properly anonymize IP addresses starting with '9' Thanks to defa-at-so36.net for reporting this problem. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=529 - bugfix: build problems on SuSe Linux Thanks Andreas Stieger for the patch - bugfix: omelasticsearch error file did not work correctly on ES 1.0+ due to a breaking change in the ElasticSearch API. see also: https://github.com/rsyslog/rsyslog/issues/104 - bugfix: potential abort when a message with PRI > 191 was processed if the "pri-text" property was used in active templates, this could be abused to a remote denial of service from permitted senders see also: CVE-2014-3634 --------------------------------------------------------------------------- Version 8.4.0 [v8-stable] 2014-08-18 - this is the new stable branch, which incorporates all enhancements of rsyslog 8.3. --------------------------------------------------------------------------- Version 8.3.5 [v8-devel] 2014-08-05 - mmjsonparse: support selectable cookie and target containers This permits to put different meanings into a json formatted syslog message, e.g. the "traditional" cee or cim data. - bugfix: mmjsonparse did not build with json-c < 0.10 This was a regression introduced some time in the past in order to support API changes in json-c. Now we check for the version and use proper code. - omprog: emit error message via syslog() if loading binary fails This happens after forking, so omprog has no longer access to rsyslog's regular error reporting functions. Previously, this meant any error message was lost. Now it is emitted via regular syslog (which may end up in a different instance, if multiple instances run...) - couple of patches imported from v7-stable (7.6.4) --------------------------------------------------------------------------- Version 8.3.4 [v8-devel] 2014-07-11 - new pmciscoios parser supporting various Cisco IOS formats - RFC3164 timestamp parser now accepts timezones and subsecond resolution ... at least for some common formats and where we could do so without running risk of breaking proper formats (or introducing regressions) - new parser config object -- permits to define custom parser definitions - new tzinfo config object -- permits to define time zone offsets This is a utility object that currently is being used by some parsers. - bugfix: mishandling of input modules not supporting new input instances If they did not support this, accidentally the output module part of the module union was written, leading to unpredictable results. Note: all core modules do support this interface, but some contributed or very old ones do not. - bugfix: double-free when ruleset() parser parameters were used While unlikely, this could cause stability issues even after the config phase. --------------------------------------------------------------------------- Version 8.3.3 [v8-devel] 2014-06-26 - unify input object naming imudp now supports "name" parameter, as other inputs do. "inputname" has been deprecated, but can still be used. Same applies to "appendport" subparameter". Thanks to "Nick Syslog" for the suggestion. - made the missing (contributed) modules build under v8 [import from 8.2.2] Modules: * mmrfc5424addhmac * omrabbitmq * omgssapi * omhdfs * omzmq3 - added a cleanup process (janitor); permits to close omfile files after a timeout - make omgssapi build under v8.3 [import vom v8.2] note that we could do this to the stable, because there is NO regression chance at all: only omgssapi was changed, and this module did NOT work previously. - removed obsolete --disable-fsstnd configure option Thanks to Thomas D. for alerting us. Closes: https://github.com/rsyslog/rsyslog/issues/72 --------------------------------------------------------------------------- Version 8.3.2 [v8-devel] 2014-05-02 - new template options for date extraction: - year - month - day - wday - hour - minute - second - tzoffshour - tzoffsmin - tzoffsdirection - wdayname For string templates, these are property options and they are prefixed with "date-" (e.g. "date-year", "date-month", ...) see also: https://github.com/rsyslog/rsyslog/issues/65 - bugfix: mmexternal remove framing char before processing JSON reply This did not have any real bad effects, but caused unnecessary processing, as empty replies were not properly detected. Otherwise, the bug was not noticeable from the user's PoV. - bugfix: mmexternal segfault due to invalid free in non-json input mode closes: https://github.com/rsyslog/rsyslog/issues/70 - bugfix: mmexternal segfault when external plugin sent invalid reply ... or no reply at all. This happened if the reply was improper JSON. Now, we emit an error message in those cases. see also: https://github.com/rsyslog/rsyslog/issues/69 - bugfix: mmexternal did potentially pass incomplete data to restarted external plugin This could happen if EPIPE was returned "too late", in which case the beginning of the data could be lost. - bugfix: mmexternal did not properly process messages over 4KiB The data to be passed to the external plugin was truncated after 4KiB. see: https://github.com/rsyslog/rsyslog/issues/64 - imrelp: added support for per-listener ruleset and inputname see: https://github.com/rsyslog/rsyslog/pull/63 Thanks to bobthesecurityguy github user for the patch --------------------------------------------------------------------------- Version 8.3.1 [v8-devel] 2014-04-24 - external message modification interface now support modifying message PRI - "jsonmesg" property will include uuid only if one was previously generated This is primarily a performance optimization. Whenever the message uuid is gotten, it is generated when not already present. As we used the regular setter, this means that always the uuid was generated, which is quite time-consuming. This has now been changed so that it only is generated if it already exists. That also matches more closely the semantics, as "jsonmesg" should not make modifications to the message. Note that the same applies to "fulljson" passing mode for external plugins. - added plugin to rewrite message facility and/or severity Name: fac-sever-rewrite.py - permits to build against json-c 0.12 Unfortunately, json-c had an ABI breakage, so this is necessary. Note that versions prior to 0.12 had security issues (CVE-2013-6370, CVE-2013-6371) and so it is desirable to link against the new version. Thanks to Thomas D. for the patch. Note that at least some distros have fixed the security issue in older versions of json-c, so this seems to apply mostly when building from sources. - bugfix: using UUID property could cause segfault - bugfix/mmexternal: memory leak - bugfix: memory leak when using "jsonmesg" property - bugfix: mmutf8fix did not detect two invalid sequences Thanks to Axel Rau for the patch. - bugfix: build problems with lexer.l on some platforms For some reason, the strdup() prototype and others are missing. I admit that I don't know why, as this happens only in 8.3.0+ and there is no indication of changes to the affected files. In any case, we need to fix this, and the current solution works at least as an interim one. --------------------------------------------------------------------------- Version 8.3.0 [v8-devel] 2014-04-10 - new plugin for anonymizing credit card numbers Thanks to Peter Slavov for providing the code. - external message modification modules are now supported They are bound via the new native module "mmexternal". Also, a sample skeleton for an external python message modification module has been added. - new $jsonmesg property with JSON representation of whole message object closes: https://github.com/rsyslog/rsyslog/issues/19 - improved error message for invalid field extraction in string template see also: http://kb.monitorware.com/problem-with-field-based-extraction-t12299.html - fix build problems on Solaris - NOTE: a json-c API that we begun to use requires the compiler to be in c99 mode. By default, we select it automatically. If you modify this and use gcc, be sure to include "-std=c99" in your compiler flags. This seems to be necessary only for older versions of gcc. --------------------------------------------------------------------------- Version 8.2.3 [v8-stable] 2014-??-?? - bugfix: ommysql: handle/mem leak upon termination of worker thread This could become bad if the (instance) worker threads are often started and terminated. But it takes quite a while to show effect. --------------------------------------------------------------------------- Version 8.2.2 [v8-stable] 2014-06-02 - made the missing (contributed) modules build under v8 Note that we could do this to the stable, because there is NO regression chance at all: only the modules themselves were changed, and they did NOT work at all previously. Please also note that most of these modules did not yet receive real testing. As we don't have the necessary environments (easily enough available), we depend on users submitting error reports and helping to iron out any issues that may arise. Modules: * mmrfc5424addhmac * omrabbitmq * omgssapi * omhdfs * omzmq3 --------------------------------------------------------------------------- Version 8.2.1 [v8-stable] 2014-04-17 - permits to build against json-c 0.12 Unfortunately, json-c had an ABI breakage, so this is necessary. Note that versions prior to 0.12 had security issues (CVE-2013-6370, CVE-2013-6371) and so it is desirable to link against the new version. Thanks to Thomas D. for the patch. Note that at least some distros have fixed the security issue in older versions of json-c, so this seems to apply mostly when building from sources. - doc is no longer shipped as part of the rsyslog tarball Instead, the rsyslog-doc project creates its own tarball. This is the result of a mailing list discussion after the 8.2.0 release with a tarball-in-tarball approach, which was disliked by almost all distro maintainers. This move also has the advantage of de-coupling the release cycles of both projects a bit (which turned out to be a bit problematic in practice). - bugfix: mmutf8fix did not detect two invalid sequences Thanks to Axel Rau for the patch. --------------------------------------------------------------------------- Version 8.2.0 [v8-stable] 2014-04-02 This starts a new stable branch based on 8.1.6 plus the following changes: - we now use doc from the rsyslog-doc project As such, the ./doc subtree has been removed. Instead, a cache of the rsyslog-doc project's files has been included in ./rsyslog-doc.tar.gz. Note that the exact distribution mode for the doc is still under discussion and may change in future releases. This was agreed upon on the rsyslog mailing list. For doc issues and corrections, be sure to work with the rsyslog-doc project. It is currently hosted at https://github.com/rsyslog/rsyslog-doc - add support for specifying the liblogging-stdlog channel spec new global parameter "stdlog.channelspec" - add "defaultnetstreamdrivercertfile" global variable to set a default for the certfile. Thanks to Radu Gheorghe for the patch. - omelasticsearch: add new "usehttps" parameter for secured connections Thanks to Radu Gheorghe for the patch. - "action resumed" message now also specifies module type which makes troubleshooting a bit easier. Note that we cannot output all the config details (like destination etc) as this would require much more elaborate code changes, which we at least do not like to do in the stable version. - add capability to override GnuTLS path in build process Thanks to Clayton Shotwell for the patch - better and more consistent action naming, action queues now always contain the word "queue" after the action name - bugfix: ompipe did resume itself even when it was still in error See: https://github.com/rsyslog/rsyslog/issues/35 Thanks to github user schplat for reporting - bugfix: ompipe used invalid default template This is a regression from an old change (didn't track it down precisely, but over a year ago). It used the Forwarding template instead of the file template (so we have a full syslog header). This fix corrects it back to previous behavior, but new scripts that used the wrong format may now need to have the RSYSLOG_ForwardingFormat template explicitly be applied. closes: https://github.com/rsyslog/rsyslog/issues/50 --------------------------------------------------------------------------- Version 8.1.6 [release candidate] 2014-02-20 - omfile: permit to set global defaults for action parameters Thanks to Nathan Brown for the patch. See also: https://github.com/rsyslog/rsyslog/pull/23 - add capability to escape control characters in the C way of doing it adds new global parameter "parser.escapeControlCharactersCStyle" Thanks to Nathan Brown for the patch. See also: https://github.com/rsyslog/rsyslog/pull/13 - parser global parameters can now be set using RainerScript global() Thanks to Nathan Brown for the patch. See also: https://github.com/rsyslog/rsyslog/pull/23 - omprog: guard program-to-be-executed against CTL-C This can frequently happen in debug mode, where rsyslog is terminated by ctl-c. In any case, SIGINT is not meant to control the child process, so it should be blocked. - omprog bugfix: parameter "forceSingleInstance" is NOT mandatory - add new jsonr property replacer option Thanks to Nathan Brown for the patch. - added external plugin interface - ommongodb: add authentication support (untested) Thanks to JT for the patch. See also: https://github.com/rsyslog/rsyslog/pull/17 - bugfix: json templates are improperly created Strings miss the terminating NUL character, which obviously can lead to all sorts of problems. See also: https://github.com/rsyslog/rsyslog/issues/27 Thanks to Alain for the analysis and the patch. - ompgsql bugfix: improper handling of auto-backgrounding mode If rsyslog was set to auto-background itself (default code behavior, but many distros now turn it off for good reason), ompgsql could not properly connect. This could even lead to a segfault. The core reason was that a PG session handle was kept open over a fork, something that is explicitly forbidden in the PG API. Thanks to Alain for the analysis and the patch. - bugfix: ommongodb's template parameter was mandatory but should have been optional Thanks to Alain for the analysis and the patch. - bugfix: end of batch processing was not 100% correct. Could lead to outputs not properly writing messages. At least omelasticsearch did not write anything to the database due to this bug. See: https://github.com/rsyslog/rsyslog/issues/10 Thanks to Radu Gheorghe for reporting the issue. --------------------------------------------------------------------------- Version 8.1.5 [devel] 2014-01-24 - omprog: ability to execute multiple program instances per action It can now execute one program instance per worker thread. This is generally a very good thing the have performance wise. Usually, this should cause no problems with the invoked program. For that reason, we have decided to make this the default mode of operation. If not desired, it can be turned off via the 'forceSingleInstance="on"' action parameter. CHANGE OF BEHAVIOR: previous versions did always execute only one instance per action, no matter how many workers were active. If your program has special needs, you need to change your configuration. - imfile now supports inotify (but must be explicitly turned on) - imfile no longer has a limit on number of monitored files - added ProcessInternalMessages global system parameter This permits to inject rsyslog status messages into *another* main syslogd or the journal. - new dependency: liblogging-stdlog (for submitting to external logger) - bugfix: imuxsock input parameters were not accepted due to copy&paste error. Thanks to Andy Goldstein for the fix. --------------------------------------------------------------------------- Version 8.1.4 [devel] 2014-01-10 - add exec_template() RainerScript function - imrelp: support for TCP KEEPALIVE added - bumped librelp dependency to 1.2.2 to support new KEEPALIVE feature - Add directives for numerically specifying GIDs/UIDs The already present directives (FileOwner, FileGroup, DirOwner, DirGroup) translate names to numerical IDs, which depends on the user information being available during rsyslog's startup. This can fail if the information is obtained over a network or from a service such as SSSD. The new directives provide a way to specify the numerical IDs directly and bypass the lookup. Thanks to Tomas Heinrich for the patch. - bugfix: action commitTransaction() processing did not properly handle suspended actions - bugfix: omelasticsearch fail.es stats counter was improperly maintained --------------------------------------------------------------------------- Version 8.1.3 [devel] 2013-12-06 THIS VERSION CAN BE CONSIDERED A "NORMAL" DEVEL RELEASE. It's no longer highly experimental. This assertion is based on real-world feedback. - changes to the strgen module interface - new output module interface for transactional modules - performance improvements * reduced number of malloc/frees due to further changes to the output module interface * reduced number of malloc/frees during string template processing We now re-use once allocated string template memory for as long as the worker thread exists. This saves us from doing new memory allocs (and their free counterpart) when the next message is processed. The drawback is that the cache always is the size of the so-far largest message processed. This is not considered a problem, as in any case a single messages' memory footprint should be far lower than that of a whole set of messages (especially on busy servers). * used variable qualifiers (const, __restrict__) to hopefully help the compiler generate somewhat faster code - failed action detection more precisely for a number of actions If an action uses string parameter passing but is non-transactional it can be executed immediately, giving a quicker indication of action failure. - bugfix: limiting queue disk space did not work properly * queue.maxdiskspace actually initializes queue.maxfilesize * total size of queue files was not checked against queue.maxdiskspace for disk assisted queues. Thanks to Karol Jurak for the patch. --------------------------------------------------------------------------- Version 8.1.2 [experimental] 2013-11-28 - support for liblognorm1 added - results in performance improvements Thanks to Pavel Levshin for his work in this regard. - support for jemalloc added via --enable-jemalloc Thanks to Pavel Levshin for suggesting jemalloc Note that build system is experimental at this stage. - queue defaults have changed * high water mark is now dynamically 90% of queue size * low water makr is now dynamically 70% of queue size * queue.discardMark is now dynamically 98% of queue size * queue.workerThreadMinimumMessage set to queue.size / num workers For queues with very low queue.maxSize (< 100), "emergency" defaults will be used. - bugfix: disk queues created files in wrong working directory if the $WorkDirectory was changed multiple times, all queues only used the last value set. - bugfix: legacy directive $ActionQueueWorkerThreads was not honored - bugfix: mmrfc5424addhmac: "key" parameter was not properly processed --------------------------------------------------------------------------- Version 8.1.1 [experimental] 2013-11-19 - bugfix: STOP/discard(~) was mostly NOT honored This lead to execution of config code that was not meant to be executed. - bugfix: memory leak on worker thread termination - bugfix: potential segfault in omfile under heavy load Thanks to Pavel Levshin for alerting us. - bugfix: mmsequence: instance mode did not work Thanks to Pavel Levshin for the patch - bugfix: segfault on startup when certain script constructs are used e.g. "if not $msg ..." - omhiredis: now supports v8 output module interface and works again Thanks to Pavel Levshin for the patch - mmaudit: now supports v8 output module interface and work again - bugfix: potential abort on startup in debug mode This depends on template type being used. The root cause was a non-necessary debug output, which were at the wrong spot (leftover from initial testing). Thanks to Pavel Levshin for alerting us and providing a patch proposal. --------------------------------------------------------------------------- Version 8.1.0 [experimental] 2013-11-15 - rewritten core engine for higher performance and new features In detail: * completely rewritten rule execution engine * completely changed output module interface * remodelled output module interface * enabled important output modules to support full concurrent operation The core engine has been considerably changed and must be considered experimental at this stage. Note that it does not yet include all features planned for v8, but is close to this goal. In theory, the engine should perform much better, especially on complex configurations and busy servers. Most importantly, actions instances can now be called concurrently from worker threads and many important output modules support multiple concurrent action instances natively. - module omruleset is no longer enabled by default. Note that it has been deprecated in v7 and been replaced by the "call" statement. Also, it can still be build without problems, the option must just explicitly be given. --------------------------------------------------------------------------- Version 7.6.8 [v7.6-stable] 2014-10-?? - bugfix: typo in queue configuration parameter made parameter unusable Thanks to Bojan Smojver for the patch. - bugfix imuxsock: possible segfault when SysSock.Use="off" Thanks to alexjfisher for reporting this issue. closes https://github.com/rsyslog/rsyslog/issues/140 - bugfix: uninitialized buffer off-by-one error in hostname generation The DNS cache used uninitialized memory, which could lead to invalid hostname generation. Thanks to Jarrod Sayers for alerting us and providing analysis and patch recommendations. - remove zpipe (a testing tool) from --enable-diagtools This tool is no longer maintained and currently not used inside the testbench. We keep it in the source tree for the time being in case that it may be used in the future. - bugfix: imjournal did not build properly The build succeeded, but the module did not load due to a type in a support function name, which kept unresolved during load. - bugfix imklog: pri was miscalculated actually, the pri was totally off the real value for PRIs > 9 - bugfix rsgtutil: sometimes crashed in verify mode if file did not exist - bugfix rsgtutil: some errors/problems at end of file were not reported * The verification function in rsgtutil tool did not report deletion of whole signed blocks of lines from the end of the log file. * The verification function in rsgtutil tool did not report extra (unsigned) lines at the end of the log file. Thanks to Henri Lakk for the patch. - bugfix: error: json_tokener_errors undeclared when overriding PKGCONFIG If PKGCONFIG settings for json-c were overridden, presence of json_tokener_errors was not properly detected. closes: https://github.com/rsyslog/rsyslog/issues/143 Thanks to Alex Fisher for alerting us and the patch. --------------------------------------------------------------------------- Version 7.6.7 [v7.6-stable] 2014-10-02 - bugfix: the fix for CVE-2014-3634 did not handle all cases This is corrected now. see also: CVE-2014-3683 - fixed a build problem on some platforms Thanks to Olaf for the patch - behavior change: "msg" of messages with invalid PRI set to "rawmsg" When the PRI is invalid, the rest of the header cannot be valid. So we move all of it to MSG and do not try to parse it out. Note that this is not directly related to the security issue but rather done because it makes most sense. --------------------------------------------------------------------------- Version 7.6.6 [v7.6-stable] 2014-09-30 - bugfix: potential abort when a message with PRI > 191 was processed if the "pri-text" property was used in active templates, this could be abused to a remote denial of service from permitted senders see also: CVE-2014-3634 - bugfix: potential segfault on startup on 64 bit systems This happened immediately on startup during config processing. Once rsyslog got past this stage, it could not happen. - bugfix: build problems on SuSe Linux Thanks Andreas Stieger for the patch --------------------------------------------------------------------------- Version 7.6.5 [v7.6-stable] 2014-09-17 - bugfix: in 7.6.4, pri-based filters did not work correctly messages were distributed to the wrong bins. - bugfix: build problems on systems without atomic instructions e.g. RHEL 5; backport from v8 --------------------------------------------------------------------------- Version 7.6.4 [v7.6-stable] 2014-09-12 - add --enable-generate-man-pages configure switch (default: enabled) This forces generation of man pages, even if cached ones exists. This "fixes" a typical release tarball nit. While it is hackish, the benefit is clear given the history of failed tarball releases since we changed the cached man page handling. It was just too easy to get that wrong. - removed obsolete --disable-fsstnd configure option Thanks to Thomas D. for alerting us. Closes: https://github.com/rsyslog/rsyslog/issues/72 - permits to build against json-c 0.12 Unfortunately, json-c had an ABI breakage, so this is necessary. Note that versions prior to 0.12 had security issues (CVE-2013-6370, CVE-2013-6371) and so it is desirable to link against the new version. Thanks to Thomas D. for the patch. Note that at least some distros have fixed the security issue in older versions of json-c, so this seems to apply mostly when building from sources. - new omfile default module parameters * filecreatemode * fileowner * fileownernum * filegroup * filegroupnum * dirowner * dirownernum * dirgroup * dirgroupnum Thanks to Karol Jurak for the patch. - bugfix: memory leak in TCP TLS mode - bugfix: imfile: if a state file for a different file name was set, that different file (name) was monitored instead of the configured one. Now, the state file is deleted and the correct file monitored. closes: https://github.com/rsyslog/rsyslog/issues/103 - bugfix: using UUID property could cause segfault - bugfix: mmutf8fix did not detect two invalid sequences Thanks to Axel Rau for the patch. - bugfix: file descriptor leak with Guardtime signatures When a .gtstate file is opened it is never closed. This is especially bad when dynafiles frequently get evicted from dynafile cache and be re-opened again. - bugfix: busy loop in tcp listener when running out of file descriptors Thanks to Susant Sahani for the patch. - bugfix: mishandling of input modules not supporting new input instances If they did not support this, accidentally the output module part of the module union was written, leading to unpredictable results. Note: all core modules do support this interface, but some contributed or very old ones do not. - bugfix: double-free when ruleset() parser parameters were used While unlikely, this could cause stability issues even after the config phase. - bugfix: output modules with parameters with multiple passing modes could caused strange behavior including aborts This was due to the fact that the action module only preserved and processed the last set passing mode. Note that this was not a problem for the plugins provided by the rsyslog git: none of them uses different passing modes. Thanks to Tomas Heinrich for providing a very detailed bug report. - various fixes after coverity scan These do not address issues seen in practice but those seen by the tool. Some of them may affect practical deployments. Thanks to Tomas Heinrich for the patches. - bugfix imuxsock: "Last message repeated..." was not emitted at shutdown The "Last message repeated..." notice didn't get printed if rsyslog was shut down before the repetition was broken. Thanks to Tomas Heinrich for the patch. - bugfix: make dist failed when GUARDTIME or LIBGCRYPT feature was disabled - bugfix: mmjsonparse did not build with json-c < 0.10 This was a regression introduced some time in the past in order to support API changes in json-c. Now we check for the version and use proper code. - bugfix: mmanon did not properly anonymize IP addresses starting with '9' Thanks to defa-at-so36.net for reporting this problem. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=529 --------------------------------------------------------------------------- Version 7.6.3 [v7.6-stable] 2014-03-27 - add capability to override GnuTLS path in build process Thanks to Clayton Shotwell for the patch - support for librelp 1.2.5 Support new return states of librelp 1.2.5 to emit better error messages For obvious reasons, librelp 1.2.5 is now required. - bugfix: ompipe used invalid default template This is a regression from an old change (didn't track it down precisely, but over a year ago). It used the Forwarding template instead of the file template (so we have a full syslog header). This fix corrects it back to previous behavior, but new scripts that used the wrong format may now need to have the RSYSLOG_ForwardingFormat template explicitly be applied. closes: https://github.com/rsyslog/rsyslog/issues/50 - bugfix: ompipe did emit many suspension messages for /dev/xconsole (hopefully now) closes: https://github.com/rsyslog/rsyslog/issues/35 When it was present, but nobody reading from it. The problem is the way the rsyslog v7 engine tries to resolve failures in outputs. It does some retries, and along those lines some state information gets lost and it is close to impossible to retain it. However, the actual root problem is that ompipe does not reliably detect if it is able to recover. The problem here is that it actually does not know this before it does an actual write. These two things together mess up the logic that suppresses invalid resumption/suspension messages (actually, the plugin switches state really that often). Nevertheless, the prime problem with /dev/xconsole (and probably most other pipes as well) is that it gets full. So I have now added code that checks, during resume processing, if the pipe is writable. If it is not, resume is deferred. That should address the case. --------------------------------------------------------------------------- Version 7.6.2 [v7.6-stable] 2014-03-17 - support for librelp 1.2.4 This was necessary due to the problems with librelp 1.2.3 API stability. We now use the new native 1.2.4 APIs to learn about the state of librelp's TLS support. For obvious reasons, librelp 1.2.4 is now required. --------------------------------------------------------------------------- Version 7.6.1 [v7.6-stable] 2014-03-13 - added "action.reportSuspension" action parameter This now permits to control handling on a per-action basis rather to the previous "global setting only". - "action resumed" message now also specifies module type which makes troubleshooting a bit easier. Note that we cannot output all the config details (like destination etc) as this would require much more elaborate code changes, which we at least do not like to do in the stable version. - better and more consistent action naming, action queues now always contain the word "queue" after the action name - add support for "tls-less" librelp we now require librelp 1.2.3, as we need the new error code definition See also: https://github.com/rsyslog/librelp/issues/1 - build system improvements * autoconf subdir option * support for newer json-c packages Thanks to Michael Biebl for the patches. - imjournal enhancements: * log entries with empty message field are no longer ignored * invalid facility and severity values are replaced by defaults * new config parameters to set default facility and severity Thanks to Tomas Heinrich for implementing this - bugfix: ompipe did resume itself even when it was still in error See: https://github.com/rsyslog/rsyslog/issues/35 Thanks to github user schplat for reporting - bugfix: "action xxx suspended" did report incorrect error code - bugfix: ommongodb's template parameter was mandatory but should have been optional Thanks to Alain for the analysis and the patch. - bugfix: only partial doc was put into distribution tarball Thanks to Michael Biebl for alerting us. see also: https://github.com/rsyslog/rsyslog/issues/31 - bugfix: async ruleset did process already-deleted messages Thanks to John Novotny for the patch. --------------------------------------------------------------------------- Version 7.6.0 [v7.6-stable] 2014-02-12 This starts a new stable branch based on 7.5.8 plus the following changes: - bugfix: imuxsock input parameters were not accepted due to copy&paste error. Thanks to Andy Goldstein for the fix. - added ProcessInternalMessages global system parameter This permits to inject rsyslog status messages into *another* main syslogd or the journal. - new dependency: liblogging-stdlog (for submitting to external logger) - bugfix: json templates are improperly created Strings miss the terminating NUL character, which obviously can lead to all sorts of problems. See also: https://github.com/rsyslog/rsyslog/issues/27 Thanks to Alain for the analysis and the patch. - ompgsql bugfix: improper handling of auto-backgrounding mode If rsyslog was set to auto-background itself (default code behavior, but many distros now turn it off for good reason), ompgsql could not properly connect. This could even lead to a segfault. The core reason was that a PG session handle was kept open over a fork, something that is explicitly forbidden in the PG API. Thanks to Alain for the analysis and the patch. --------------------------------------------------------------------------- Version 7.5.8 [v7-release candidate] 2014-01-09 - add exec_template() RainerScript function - add debug.onShutdown and debug.logFile global parameters These enable the new "debug on shutdown" mode, which can be used to track hard to find problems that occur during system shutdown. - Add directives for numerically specifying GIDs/UIDs The already present directives (FileOwner, FileGroup, DirOwner, DirGroup) translate names to numerical IDs, which depends on the user information being available during rsyslog's startup. This can fail if the information is obtained over a network or from a service such as SSSD. The new directives provide a way to specify the numerical IDs directly and bypass the lookup. Thanks to Tomas Heinrich for the patch. - actions now report if they suspend and resume themselves this is by default on and controllable by the action.reportSuspension global parameter - bugfix: omelasticsearch fail.es stats counter was improperly maintained - bugfix: mmrfc5424addhmac: "key" parameter was not properly processed - add new impstats action counters: * suspended * suspended.duration * resumed --------------------------------------------------------------------------- Version 7.5.7 [v7-devel] 2013-11-25 - queue defaults have changed * high water mark is now dynamically 90% of queue size * low water makr is now dynamically 70% of queue size * queue.discardMark is now dynamically 98% of queue size * queue.workerThreadMinimumMessage set to queue.size / num workers For queues with very low queue.maxSize (< 100), "emergency" defaults will be used. - worker thread pool handling has been improved Among others, permits pool to actually shrink (was quite hard with previous implementation. This will also improve performance and/or lower system overhead on busy systems. Thanks to Pavel Levshin for the enhancement. - bugfix: mmpstrucdata generated inaccessible properties - bugfix: RainerScript optimizer did not optimize PRI filters things like "if $syslogfacility-text == "local3"" were not converted to PRIFILT. This was a regression introduced in 7.5.6. - bugfix: legacy directive $ActionQueueWorkerThreads was not honored - bugfix: segfault on startup when certain script constructs are used e.g. "if not $msg ..." - bugfix: ommysql lost configfile/section parameters after first close This means that when a connection was broken, it was probably re-instantiated with different parameters than configured. - bugfix: regression in template processing with subtrees in templates Thanks to Pavel Levshin for the fix - bugfix: regular worker threads are not properly (re)started if DA mode is active. This occurs only under rare conditions, but definitely is a bug that needed to be addressed. It probably is present since version 4. Note that this patch has not been applied to v7.4-stable, as it is very unlikely to happen and the fix itself has some regression potential (the fix looks very solid, but it addresses a core component). Thanks to Pavel Levshin for the fix - now emit warning message if om with msg passing mode uses action queue These can modify the message, and this causes races. - bugfix: $SystemLogUseSysTimeStamp/$SystemLogUsePIDFromSystem did not work Thanks to Tomas Heinrich for the patch. --------------------------------------------------------------------------- Version 7.5.6 [devel] 2013-10-29 - impstats: add capability to bind to a ruleset - improved performance of RainerScript variable access by refactoring the whole body of variable handling code. This also solves some of the anomalies experienced in some versions of rsyslog. All variable types are now handled in unified code, including access via templates. - RainerScript: make use of 64 bit for numbers where available Thanks to Pavel Levshin for enhancement. - slight performance optimization if GCC is used We give branch prediction hints for the frequent RETiRet macro which is used for error handling. Some slight performance gain is to be expected from that. - removed global variable support The original idea was not well thought out and global variables, as implemented, worked far different from what anybody would expect. As such, we consider the current approach as an experiment that did not work out and opt to removing it, clearing the way for a better future solution. Note: global vars were introduced in 7.5.3 on Sept, 11th 2013. - new module mmsequence, primarily used for action load balancing Thanks to Pavel Levshin for contributing this module. - bugfix: unset statement always worked on message var, even if local var was given - imudp: support for binding to ruleset added - bugfix: segfault if variable was assigned to non-container subtree Thanks to Pavel Levshin for the fix - bugfix: imuxsock did not support addtl sockets if syssock was disabled Thanks to Pavel Levshin for the fix - bugfix: running imupd on multiple threads lead to segfault if recvmmsg is available - bugfix: imudp when using recvmmsg could report wrong sender IP - bugfix: segfault if re_extract() function was used and no match found - bugfix: omelasticsearch did not compile on platforms without atomic instructions - bugfix: potential misaddressing on startup if property-filter was used This could happen if the property name was longer than 127 chars, a case that would not happen in practice. - bugfix: invalid property filter was not properly disabled in ruleset Note: the cosmetic memory leak introduced with that patch in 7.4.5 is now also fixed. - imported bugfixes from 7.4.6 stable release --------------------------------------------------------------------------- Version 7.5.5 [devel] 2013-10-16 - imfile: permit to monitor an unlimited number of files - imptcp: add "defaultTZ" input parameter - imudp: support for multiple receiver threads added - imudp: add "dfltTZ" input config parameter - bugfix: memory leak in mmnormalize - bugfix: mmutf8fix did not properly handle invalid UTF-8 at END of message if the very last character sequence was too long, this was not detected Thanks to Risto Vaarandi for reporting this problem. - mmanon: removed the check for specific "terminator characters" after last octet. As it turned out, this didn't work in practice as there was an enormous set of potential terminator chars -- so removing them was the best thing to do. Note that this may change behavior of existing installations. Yet, we still consider this an important bugfix, that should be applied to the stable branch. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=477 Thanks to Muri Cicanor for initiating the discussion - now requires libestr 0.1.7 as early versions had a nasty bug in string comparisons - bugfix: mmanon did not detect all IP addresses in rewrite mode The problem occurred if two IPs were close to each other and the first one was shrunk. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=485 Thanks to micah-at-riseup.net for reporting this bug - bugfix: mmanon sometimes used invalid replacement char in simple mode depending on configuration sequence, the replacement character was set to 's' instead of the correct value. Most importantly, it was set to 's' if simple mode was selected and no replacement char set. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=484 Thanks to micah-at-riseup.net for reporting this bug - bugfix: memory leak in mmnormalize - bugfix: array-based ==/!= comparisons lead to invalid results This was a regression introduced in 7.3.5 bei the PRI optimizer --------------------------------------------------------------------------- Version 7.5.4 [devel] 2013-10-07 - mmpstrucdata: new module to parse RFC5424 structured data into json message properties - change main/ruleset queue defaults to be more enterprise-like new defaults are queue.size 100,000 max workers 2, worker activation after 40,000 msgs are queued, batch size 256. These settings are much more useful for enterprises and will not hurt low-end systems that much. This is part of our re-focus on enterprise needs. - omfwd: new action parameter "maxErrorMessages" added - omfile: new module parameters to set action defaults added * dirCreateMode * fileCreateMode - mmutf8fix: new module to fix invalid UTF-8 sequences - imuxsock: handle unlimited number of additional listen sockets - doc: improve usability by linking to relevant web resources The idea is to enable users to quickly find additional information, samples, HOWTOs and the like on the main site. At the same time, (very) slightly remove memory footprint when few listeners are monitored. - bugfix: omfwd parameter streamdrivermode was not properly handled it was always overwritten by whatever value was set via the legacy directive $ActionSendStreamDriverMode - imtcp: add streamdriver.name module parameter permits overriding the system default stream driver (gtls, ptcp) - bugfix: build system: libgcrypt.h needed even if libgrcypt was disabled Thanks to Jonny Törnbom for reporting this problem - imported bugfixes from 7.4.4 --------------------------------------------------------------------------- Version 7.5.3 [devel] 2013-09-11 - imfile: support for escaping LF characters added embedded LF in syslog messages cause a lot of trouble. imfile now has the capability to escape them to "#012" (just like the regular control character escape option). This requires new-style input statements to be used. If legacy configuration statements are used, LF escaping is always turned off to preserve compatibility. NOTE: if input() statements were already used, there is a CHANGE OF BEHAVIOR: starting with this version, escaping is enabled by default. So if you do not want it, you need to add escapeLF="off" to the input statement. Given the trouble LFs cause and the fact that the majority of installations still use legacy config, we considered this behavior change acceptable and useful. see also: http://blog.gerhards.net/2013/09/imfile-multi-line-messages.html - add support for global and local variables - bugfix: queue file size was not correctly processed this could lead to using one queue file per message for sizes >2GiB Thanks to Tomas Heinrich for the patch. - add main_queue() configuration object to configure main message queue - bugfix: stream compression in imptcp caused timestamp to be corrupted - imudp: add ability to specify SO_RCVBUF size (rcvbufSize parameter) - imudp: use inputname for statistics, if configured - impstats: add process resource usage counters [via getrusage()] - impstats: add parameter "resetCounters" to report delta values possible for most, but not all, counters. See doc for details. - librelp 1.2.0 is now required - make use of new librelp generic error reporting facility This leads to more error messages being passed to the user and thus simplified troubleshooting. - bugfix: very small memory leak in imrelp more or less cosmetic, a single memory block was not freed, but this only happens immediately before termination (when the OS automatically frees all memory). Still an annoyance e.g. in valgrind. - fix compile problem in debug build - imported fixes from 7.4.4 --------------------------------------------------------------------------- Version 7.5.2 [devel] 2013-07-04 - librelp 1.1.4 is now required We use API extensions for better error reporting and higher performance. - omrelp: use transactional mode to make imrelp emit bulk sends - omrelp: add "windowSize" parameter to set custom RELP window size - bugfix: double-free in omelasticsearch closes: http://bugzilla.adiscon.com/show_bug.cgi?id=461 a security advisory for this bug is available at: http://www.lsexperts.de/advisories/lse-2013-07-03.txt CVE: CVE-2013-4758 PLEASE NOTE: This issue only existed if omelasticsearch was used in a non-default configuration, where the "errorfile" parameter was specified. Without that parameter set, the bug could not be triggered. Thanks to Markus Vervier and Marius Ionescu for providing a detailed bug report. Special thanks to Markus for coordinating his security advisory with us. - doc: fixed various typos closes: http://bugzilla.adiscon.com/show_bug.cgi?id=391 Thanks to Georgi Georgiev for the patch. --------------------------------------------------------------------------- Version 7.5.1 [devel] 2013-06-26 - librelp 1.1.3 is required - older versions can lead to a segfault - add mmfields, which among others supports easy parsing of CEF messages - omrelp: * new parameter "compression.prioritystring" to control encryption parameters used by GnuTLS - imrelp: * new parameter "compression.dhbits" to control the number of bits being used for Diffie-Hellman key generation * new parameter "compression.prioritystring" to control encryption parameters used by GnuTLS * support for impstats added * support for setting permitted peers (client authentication) added * bugfix: potential segfault at startup on invalid config parameters - imjournal: imported patches from 7.4.1 - omprog: add support for command line parameters - added experimental TCP stream compression (imptcp only, currently) - added BSD-specific syslog facilities * "console" * "bsd_security" - this is called "security" under BSD, but that name was unfortunately already taken by some standard facility. So I did the (hopefully) second-best thing and renamed it a little. - imported fixes from 7.4.2 (especially build problems on FreeBSD) - bugfix: imptcp did not properly initialize compression status variable could lead to segfault if stream:always compression mode was selected --------------------------------------------------------------------------- Version 7.5.0 [devel] 2013-06-11 - imrelp: implement "ruleset" module parameter - imrelp/omrelp: add TLS & compression (zip) support - omrelp: add "rebindInterval" parameter - add -S command line option to specify IP address to use for RELP client connections Thanks to Axel Rau for the patch. --------------------------------------------------------------------------- Version 7.4.11 [v7.4-stable] *never released* - imjournal enhancements: * log entries with empty message field are no longer ignored * invalid facility and severity values are replaced by defaults * new config parameters to set default facility and severity Thanks to Tomas Heinrich for implementing this --------------------------------------------------------------------------- Version 7.4.10 [v7.4-stable] 2014-02-12 - bugfix: json templates are improperly created Strings miss the terminating NUL character, which obviously can lead to all sorts of problems. See also: https://github.com/rsyslog/rsyslog/issues/27 Thanks to Alain for the analysis and the patch. - ompgsql bugfix: improper handling of auto-backgrounding mode If rsyslog was set to auto-background itself (default code behavior, but many distros now turn it off for good reason), ompgsql could not properly connect. This could even lead to a segfault. The core reason was that a PG session handle was kept open over a fork, something that is explicitly forbidden in the PG API. Thanks to Alain for the analysis and the patch. --------------------------------------------------------------------------- Version 7.4.9 [v7.4-stable] 2014-01-22 - added ProcessInternalMessages global system parameter This permits to inject rsyslog status messages into *another* main syslogd or the journal. - new dependency: liblogging-stdlog (for submitting to external logger) - bugfix: imuxsock input parameters were not accepted due to copy&paste error. Thanks to Andy Goldstein for the fix. - bugfix: potential double-free in RainerScript equal comparison happens if the left-hand operand is JSON object and the right-hand operand is a non-string that does not convert to a number (for example, it can be another JSON object, probably the only case that could happen in practice). This is very unlikely to be triggered. - bugfix: some RainerScript Json(Variable)/string comparisons were wrong --------------------------------------------------------------------------- Version 7.4.8 [v7.4-stable] 2014-01-08 - rsgtutil provides better error messages on unfinished signature blocks - bugfix: guard against control characters in internal (error) messages Thanks to Ahto Truu for alerting us. - bugfix: immark did emit messages under kern.=info instead of syslog.=info Note that his can potentially break existing configurations that rely on immark sending as kern.=info. Unfortunately, we cannot leave this unfixed as we never should emit messages under the kern facility. --------------------------------------------------------------------------- Version 7.4.7 [v7.4-stable] 2013-12-10 - bugfix: limiting queue disk space did not work properly * queue.maxdiskspace actually initializes queue.maxfilesize * total size of queue files was not checked against queue.maxdiskspace for disk assisted queues. Thanks to Karol Jurak for the patch. - bugfix: linux kernel-like ratelimiter did not work properly with all inputs (for example, it did not work with imdup). The reason was that the PRI value was used, but that needed parsing of the message, which was done too late. - bugfix: disk queues created files in wrong working directory if the $WorkDirectory was changed multiple times, all queues only used the last value set. - bugfix: legacy directive $ActionQueueWorkerThreads was not honored - bugfix: segfault on startup when certain script constructs are used e.g. "if not $msg ..." - bugfix: imuxsock: UseSysTimeStamp config parameter did not work correctly Thanks to Tomas Heinrich for alerting us and providing a solution suggestion. - bugfix: $SystemLogUseSysTimeStamp/$SystemLogUsePIDFromSystem did not work Thanks to Tomas Heinrich for the patch. - improved checking of queue config parameters on startup - bugfix: call to ruleset with async queue did not use the queue closes: http://bugzilla.adiscon.com/show_bug.cgi?id=443 - bugfix: if imtcp is loaded and no listeners are configured (which is uncommon), rsyslog crashes during shutdown. --------------------------------------------------------------------------- Version 7.4.6 [v7.4-stable] 2013-10-31 - bugfix: potential abort during HUP This could happen when one of imklog, imzmq3, imkmsg, impstats, imjournal, or imuxsock were under heavy load during a HUP. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=489 Thanks to Guy Rozendorn for reporting the problem and Peval Levshin for his analysis. - bugfix: imtcp flowControl parameter incorrectly defaulted to "off" This could cause message loss on systems under heavy load and was a change-of-behavior to previous version. This is a regression most probably introduced in 5.9.0 (but did not try hard to find the exact point of its introduction). - now requires libestr 0.1.9 as earlier versions lead to problems with number handling in RainerScript - bugfix: memory leak in strlen() RainerScript function Thanks to Gregoire Seux for reporting this bug. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=486 - bugfix: buffer overrun if re_extract function was called for submatch 50 Thanks to Pavel Levshin for reporting the problem and its location. - bugfix: memleak in re_extract() function Thanks to Pavel Levshin for reporting this problem. - bugfix: potential abort in RainerScript optimizer closes: http://bugzilla.adiscon.com/show_bug.cgi?id=488 Thanks to Thomas Doll for reporting the problem and Pavel Levshin for fixing it. - bugfix: memory leak in omhiredis Thanks to Pavel Levshin for the fix - bugfix: segfault if variable was assigned to non-container subtree Thanks to Pavel Levshin for the fix --------------------------------------------------------------------------- Version 7.4.5 [v7.4-stable] 2013-10-22 - mmanon: removed the check for specific "terminator characters" after last octet. As it turned out, this didn't work in practice as there was an enormous set of potential terminator chars -- so removing them was the best thing to do. Note that this may change behavior of existing installations. Yet, we still consider this an important bugfix, that should be applied to the stable branch. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=477 Thanks to Muri Cicanor for initiating the discussion - now requires libestr 0.1.8 as early versions had a nasty bug in string comparisons - omelasticsearch: add failed.httprequests stats counter - bugfix: invalid property filter was not properly disabled in ruleset Note that this bugfix introduces a very slight memory leak, which is cosmetic, as it just holds data until termination that is no longer needed. It is just the part of the config that was invalid. We will "fix" this "issue" in the devel version first, as the fix is a bit too intrusive to do without hard need in the stable version. - bugfix: segfault if re_extract() function was used and no match found - bugfix: potential misaddressing on startup if property-filter was used This could happen if the property name was longer than 127 chars, a case that would not happen in practice. - bugfix: omelasticsearch: correct failed.http stats counter - bugfix: omelasticsearch: did not correctly initialize stats counters - bugfix: omelasticsearch: failed.es counter was only maintained in bulk mode This usually did not lead to any problems, because they are in static memory, which is initialized to zero by the OS when the plugin is loaded. But it may cause problems especially on systems that do not support atomic instructions - in this case the associated mutexes also did not get properly initialized. - bugfix: mmanon did not detect all IP addresses in rewrite mode The problem occurred if two IPs were close to each other and the first one was shrunk. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=485 Thanks to micah-at-riseup.net for reporting this bug - bugfix: mmanon sometimes used invalid replacement char in simple mode depending on configuration sequence, the replacement character was set to 's' instead of the correct value. Most importantly, it was set to 's' if simple mode was selected and no replacement char set. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=484 Thanks to micah-at-riseup.net for reporting this bug - bugfix: memory leak in mmnormalize - bugfix: array-based ==/!= comparisons lead to invalid results This was a regression introduced in 7.3.5 bei the PRI optimizer - bugfix: omprog blocked signals to executed programs The made it impossible to send signals to programs executed via omprog. Thanks to Risto Vaarandi for the analysis and a patch. - bugfix: doc: imuxsock legacy param $SystemLogSocketParseTrusted was misspelled Thanks to David Lang for alerting us - bugfix: imfile "facility" input parameter improperly handled caused facility not to be set, and severity to be overwritten with the facility value. Thanks to forum user dmunny for reporting this bug. - bugfix: small memory leak in imfile when $ResetConfigVariables was used Thanks to Grégory Nuyttens for reporting this bug and providing a fix - bugfix: segfault on startup if TLS was used but no CA cert set - bugfix: segfault on startup if TCP TLS was used but no cert or key set - bugfix: some more build problems with newer json-c versions Thanks to Michael Biebl for mentioning the problem. - bugfix: build system: libgcrypt.h needed even if libgrcypt was disabled Thanks to Jonny Törnbom for reporting this problem --------------------------------------------------------------------------- Version 7.4.4 [v7.4-stable] 2013-09-03 - better error messages in GuardTime signature provider Thanks to Ahto Truu for providing the patch. - make rsyslog use the new json-c pkgconfig file if available Thanks to the Gentoo team for the patches. - bugfix: imfile parameter "persistStateInterval" was unusable due to a case typo in imfile; work-around was to use legacy config Thanks to Brandon Murphy for reporting this bug. - bugfix: TLV16 flag encoding error in signature files from GT provider This fixes a problem where the TLV16 flag was improperly encoded. Unfortunately, existing files already have the bug and may not properly be processed. The fix uses constants from the GuardTime API lib to prevent such problems in the future. Thanks to Ahto Truu for providing the patch. - bugfix: slightly malformed SMTP handling in ommail - bugfix: segfault in omprog if no template was provided (now dflt is used) - bugfix: segfault in ompipe if no template was provided (now dflt is used) - bugfix: segfault in omsnmp if no template was provided (now dflt is used) - bugfix: some omsnmp optional config params were flagged as mandatory - bugfix: segfault in omelasticsearch when resuming queued messages after restarting Elasticsearch closes: http://bugzilla.adiscon.com/show_bug.cgi?id=464 - bugfix: imtcp addtlframedelimiter could not be set to zero Thanks to Chris Norton for alerting us. - doc bugfix: remove no-longer existing omtemplate from developer doc was specifically mentioned as a sample for creating new plugins Thanks to Yannick Brosseau for alerting us of this problem. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=473 --------------------------------------------------------------------------- Version 7.4.3 [v7.4-stable] 2013-07-18 - bugfix: queue file size was not correctly processed this could lead to using one queue file per message for sizes >2GiB Thanks to Tomas Heinrich for the patch. - bugfix: $QHOUR/$HHOUR were always "00" or "01" regression some time between v5 and here Thanks to forum user rjmcinty for reporting this bug - bugfix: testbench tool chkseq did improperly report invalid file This happened when permitted duplicate values existed in the very last lines, right before end-of-file. Thanks to Radu Gheorghe for reporting this bug. --------------------------------------------------------------------------- Version 7.4.3 [v7.4-stable] 2013-07-18 - bugfix: memory leak if disk queues were used and json data present - bugfix: CEE/json data was lost during disk queue operation - bugfix: potential segfault during startup on invalid config could happen if invalid actions were present, which could lead to improper handling in optimizer. - bugfix: 100% CPU utilization when DA queue became full - bugfix: omlibdbi did not properly close connection on some errors This happened to errors occurring in Begin/End Transaction entry points. - cosmetic bugfix: file name buffer was not freed on disk queue destruction This was an extremely small one-time per run memleak, so nothing of concern. However, it bugs under valgrind and similar memory debuggers. - fix build on FreeBSD Thanks to Christiano Rolim for the patch --------------------------------------------------------------------------- Version 7.4.2 [v7.4-stable] 2013-07-04 - bugfix: in RFC5425 TLS, multiple wildcards in auth could cause segfault - bugfix: RainerScript object required parameters were not properly checked - this could result to segfaults on startup if parameters were missing. - bugfix: double-free in omelasticsearch closes: http://bugzilla.adiscon.com/show_bug.cgi?id=461 a security advisory for this bug is available at: http://www.lsexperts.de/advisories/lse-2013-07-03.txt CVE: CVE-2013-4758 PLEASE NOTE: This issue only existed if omelasticsearch was used in a non-default configuration, where the "errorfile" parameter was specified. Without that parameter set, the bug could not be triggered. Thanks to Markus Vervier and Marius Ionescu for providing a detailed bug report. Special thanks to Markus for coordinating his security advisory with us. - bugfix: omrelp potential segfault at startup on invalid config parameters - bugfix: small memory leak when $uptime property was used - bugfix: potential segfault on rsyslog termination in imudp closes: http://bugzilla.adiscon.com/show_bug.cgi?id=456 - bugfix: lmsig_gt abort on invalid configuration parameters closes: http://bugzilla.adiscon.com/show_bug.cgi?id=448 Thanks to Risto Laanoja for the patch. - imtcp: fix typo in "listner" parameter, which is "listener" Currently, both names are accepted. - solved build problems on FreeBSD closes: http://bugzilla.adiscon.com/show_bug.cgi?id=457 closes: http://bugzilla.adiscon.com/show_bug.cgi?id=458 Thanks to Christiano for reporting and suggesting patches - solved build problems on CENTOS5 --------------------------------------------------------------------------- Version 7.4.1 [v7.4-stable] 2013-06-17 - imjournal: add ratelimiting capability The original imjournal code did not support ratelimiting at all. We now have our own ratelimiter. This can mitigate against journal database corruption, when the journal re-sends old data. This is a current bug in systemd journal, but we won't outrule this to happen in the future again. So it is better to have a safeguard in place. By default, we permit 20,000 messages within 10 minutes. This may be a bit restrictive, but given the risk potential it seems reasonable. Users requiring larger traffic flows can always adjust the value. - bugfix: potential loop in rate limiting if the message that tells about rate-limiting gets rate-limited itself, it will potentially create and endless loop - bugfix: potential segfault in imjournal if journal DB is corrupted - bugfix: prevent a segfault in imjournal if state file is not defined - bugfix imzmq3: potential segfault on startup if no problem happened at startup, everything went fine Thanks to Hongfei Cheng and Brian Knox for the patch --------------------------------------------------------------------------- Version 7.4.0 [v7.4-stable] 2013-06-06 This starts a new stable branch based on 7.3.15 plus the following changes: - add --enable-cached-man-pages ./configure option permits to build rsyslog on a system where rst2man is not installed. In that case, cached versions of the man pages are used (they were built during "make dist", so they should be current for the version in question. - doc bugfix: ReadMode wrong in imfile doc, two values were swapped Thanks to jokajak@gmail.com for mentioning this closes: http://bugzilla.adiscon.com/show_bug.cgi?id=450 - imjournal: no longer do periodic wakeup - bugfix: potential hang *in debug mode* on rsyslogd termination This ONLY affected rsyslogd if it were running with debug output enabled. - bugfix: $template statement with multiple spaces lead to invalid tpl name If multiple spaces were used in front of the template name, all but one of them became actually part of the template name. So $template a,"..." would be name " a", and as such "a" was not available, e.g. in *.* /var/log/file;a This is a legacy config problem. As it was unreported for many years, no backport of the fix to old versions will happen. This is a long-standing bug that was only recently reported by forum user mc-sim. Reference: http://kb.monitorware.com/post23448.html - 0mq fixes; credits to Hongfei Cheng and Brian Knox --------------------------------------------------------------------------- Version 7.3.15 [beta] 2013-05-15 - bugfix: problem in build system (especially when cross-compiling) Thanks to Tomas Heinrich and winfried_mb2@xmsnet.nl for the patch. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=445 - bugfix: imjournal had problem with systemd journal API change - imjournal: now obtain and include PID - bugfix: .logsig files had tlv16 indicator bit at wrong offset - bugfix: omrelp legacy config parameters set a timeout of zero which lead the legacy config to be unusable. - bugfix: segfault on startup if a disk queue was configure without file name Now this triggers an error message and the queue is changed to linkedList type. - bugfix: invalid addressing in string class (recent regression) --------------------------------------------------------------------------- Version 7.3.14 [beta] 2013-05-06 - bugfix: some man pages were not properly installed either rscryutil or rsgtutil man was installed, but not both Thanks to Marius Tomaschewski for the patch. - bugfix: potential segfault on startup when builtin module was specified in module() statement. Thanks to Marius Tomaschewski for reporting the bug. - bugfix: segfault due to invalid dynafile cache handling Accidentally, the old-style cache size parameter was used when the dynafile cache was created in a RainerScript action. If the old-style size was lower than the one actually set, this lead to misaddressing when the size was overrun, and that could lead to all kinds of "interesting things", often in segfaults. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=440 --------------------------------------------------------------------------- Version 7.3.13 [beta] 2013-04-29 - added omrabbitmq module (contributed, untested) Note: this is unsupported and as such was moved immediately into the beta version. Thanks to Vaclav Tomec for providing this module. - bugfix: build problem when --enable-encryption was not selected Thanks to Michael Biebl for fixing this. - doc bugfix: omfile parameter "VeryRobustZip" was documented as "VeryReliableZip" closes: http://bugzilla.adiscon.com/show_bug.cgi?id=437 Thanks to Thomas Doll for reporting this. --------------------------------------------------------------------------- Version 7.3.12 [devel] 2013-04-25 - added doc for omelasticsearch Thanks to Radu Gheorghe for the doc contribution. - omelasticsearch: _id field support for bulk operations closes: http://bugzilla.adiscon.com/show_bug.cgi?id=392 Thanks to Jérôme Renard for the idea and patches. - max number of templates for plugin use has been increased to five - platform compatibility enhancement: solve compile issue with libgcrypt do not use GCRY_CIPHER_MODE_AESWRAP where not available - fix compile on Solaris Thanks to Martin Carpenter for the patch. - bugfix: off-by-one error in handling local FQDN name (regression) A temporary buffer was allocated one byte too small. Did only affect startup, not actual operations. Came up during routine tests, and can have no effect once the engine runs. Bug was introduced in 7.3.11. - bugfix: build problems on Solaris closes: http://bugzilla.adiscon.com/show_bug.cgi?id=436 - bugfix: block size limit was not properly honored - bugfix: potential segfault in guardtime signature provider it could segfault if an error was reported by the GuardTime API, because an invalid free could happen then --------------------------------------------------------------------------- Version 7.3.11 [devel] 2013-04-23 - added support for encrypting log files - omhiredis: added support for redis pipeline support Thanks to Brian Knox for the patch. - bugfix: $PreserveFQDN is not properly working Thanks to Louis Bouchard for the patch closes: http://bugzilla.adiscon.com/show_bug.cgi?id=426 - bugfix: imuxsock aborted due to problem in ratelimiting code Thanks to Tomas Heinrich for the patch. - bugfix: imuxsock aborted under some conditions regression from ratelimiting enhancements - this was a different one to the one Tomas Heinrich patched. - bugfix: timestamp problems in imkmsg --------------------------------------------------------------------------- Version 7.3.10 [devel] 2013-04-10 - added RainerScript re_extract() function - omrelp: added support for RainerScript-based configuration - omrelp: added ability to specify session timeout - templates now permit substring extraction relative to end-of-string - bugfix: failover/action suspend did not work correctly This was experienced if the retry action took more than one second to complete. For suspending, a cached timestamp was used, and if the retry took longer, that timestamp was already in the past. As a result, the action never was kept in suspended state, and as such no failover happened. The suspend functionality now does no longer use the cached timestamp (should not have any performance implication, as action suspend occurs very infrequently). - bugfix: gnutls RFC5425 driver had some undersized buffers Thanks to Tomas Heinrich for the patch. - bugfix: nested if/prifilt conditions did not work properly closes: http://bugzilla.adiscon.com/show_bug.cgi?id=415 - bugfix: imuxsock aborted under some conditions regression from ratelimiting enhancements - bugfix: build problems on Solaris Thanks to Martin Carpenter for the patches. --------------------------------------------------------------------------- Version 7.3.9 [devel] 2013-03-27 - support for signing logs added - imudp: now supports user-selectable inputname - omlibdbi: now supports transaction interface if recent enough lbdbi is present - imuxsock: add ability to NOT create/delete sockets during startup and shutdown closes: http://bugzilla.adiscon.com/show_bug.cgi?id=259 - imfile: errors persisting state file are now reported closes: http://bugzilla.adiscon.com/show_bug.cgi?id=292 - imfile: now detects file change when rsyslog was inactive Previously, this case could not be detected, so if a file was overwritten or rotated away while rsyslog was stopped, some data was missing. This is now detected and the new file being forwarded right from the beginning. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=228 - updated systemd files to match current systemd source - bugfix: imudp scheduling parameters did affect main thread, not imudp closes: http://bugzilla.adiscon.com/show_bug.cgi?id=409 - bugfix: build problem on platforms without GLOB_NOMAGIC - bugfix: build problems on non-Linux platforms - bugfix: stdout/stderr were not closed on forking but were closed when running in the foreground - this was just reversed of what it should be. This is a regression of a recent change. --------------------------------------------------------------------------- Version 7.3.8 [devel] 2013-03-18 - imrelp: now supports listening to IPv4/v6 only instead of always both build now requires librelp 1.0.2 closes: http://bugzilla.adiscon.com/show_bug.cgi?id=378 - bugfix: mmanon did not build on some platforms (e.g. Ubuntu) - bugfix: segfault in expression optimizer closes: http://bugzilla.adiscon.com/show_bug.cgi?id=423 - bugfix: imuxsock was missing SysSock.ParseTrusted module parameter To use that functionality, legacy rsyslog.conf syntax had to be used. Also, the doc was missing information on the "ParseTrusted" set of config directives. - bugfix: include files got included in the wrong order closes: http://bugzilla.adiscon.com/show_bug.cgi?id=411 This happens if an $IncludeConfig directive was done on multiple files (e.g. the distro default of $IncludeConfig /etc/rsyslog.d/*.conf). In that case, the order of include file processing is reversed, which could lead to all sorts of problems. Thanks to Nathan Stratton Treadway for his great analysis of the problem, which made bug fixing really easy. --------------------------------------------------------------------------- Version 7.3.7 [devel] 2013-03-12 - add support for anonymizing IPv4 addresses - add support for writing to the Linux Journal (omjournal) - imuxsock: add capability to ignore messages from ourselves This helps prevent message routing loops, and is vital to have if omjournal is used together with traditional syslog. - field() function now supports a string as field delimiter - added ability to configure debug system via rsyslog.conf - bugfix: imuxsock segfault when system log socket was used - bugfix: mmjsonparse segfault if new-style config was used - bugfix: script == comparison did not work properly on JSON objects - bugfix: field() function did never return "***FIELD NOT FOUND***" instead it returned "***ERROR in field() FUNCTION***" in that case --------------------------------------------------------------------------- Version 7.3.6 [devel] 2013-01-28 - greatly improved speed of large-array [N]EQ RainerScript comparisons Thanks to David Lang for a related discussion that inspired the idea to do this with a much simpler (yet sufficient) approach than originally planned for. - greatly improved speed of DNS cache for large cache sizes - general performance improvements - omfile: added stats counters for dynafile caches - omfile: improved async writing, finally enabled full async write also fixed a couple of smaller issues along that way - impstats: added ability to write stats records to local file and avoid going through the syslog log stream. syslog logging can now also be turned off (see doc for details). - bugfix: imklog issued wrong facility in error messages ...what could lead to problems in other parts of the code - fix compile problem in imklog - added capability to output thread-id-to-function debug info This is a useful debug aid, but nothing of concern for regular users. --------------------------------------------------------------------------- Version 7.3.5 [devel] 2012-12-19 - ommysql: addded batching/transaction support - enhanced script optimizer to optimize common PRI-based comparisons These constructs are especially used in SUSE default config files, but also by many users (as they are more readable than the equivalent PRI-based filter). - omudpspoof: add support for new config system - omudpspoof: add support for packets larger than 1472 bytes On Ethernet, they need to be transmitted in multiple fragments. While it is known that fragmentation can cause issues, it is the best choice to be made in that case. Also improved debug output. - bugfix: omudpspoof failed depending on the execution environment The v7 engine closes fds, and closed some of libnet's fds as well, what lead to problems (unfortunately, at least some libnet versions do not report a proper error state but still "success"...). The order of libnet calls has been adjusted to by in sync with what the core engine does. - bugfix: segfault on imuxsock startup if system log socket is used and no ratelimiting supported. Happens only during initial config read phase, once this is over, everything works stable. - bugfix: mmnormalize build problems - bugfix: mmnormalize could abort rsyslog if config parameter was in error - bugfix: no error message for invalid string template parameters rather a malformed template was generated, and error information emitted at runtime. However, this could be quite confusing. Note that with this "bugfix" user experience changes: formerly, rsyslog and the affected actions properly started up, but the actions did not produce proper data. Now, there are startup error messages and the actions are NOT executed (due to missing template due to template error). - bugfix[minor]: invalid error code when mmnormalize could not access rulebase - bugfix(kind of): script optimizer did not work for complex boolean expressions - doc bugfix: corrections and improvements in mmnormalize html doc page - bugfix: some message properties could be garbled due to race condition This happened only on very high volume systems, if the same message was being processed by two different actions. This was a regression caused by the new config processor, which did no longer properly enable msg locking in multithreaded cases. The bugfix is actually a refactoring of the msg locking code - we no longer do unlocked operations, as the use case for it has mostly gone away. It is potentially possible only at very low-end systems, and there the small additional overhead of doing the locking does not really hurt. Instead, the removal of that capability can actually slightly improve performance in common cases, as the code path is smaller and requires slightly less memory writes. That probably outperforms the extra locking overhead (which in the low-end case always happens in user space, without need for kernel support as we can always directly acquire the lock - there is no contention at all). - build system cleanup (thanks to Michael Biebl for this!) - bugfix: omelasticsearch did not properly compile on some platforms due to missing libmath. Thanks to Michael Biebl for the fix --------------------------------------------------------------------------- Version 7.3.4 [devel] 2012-11-23 - further (and rather drastically) improved disk queue performance we now save one third of the IO calls - imklog: added ParseKernelTimestamp parameter (import from 5.10.2) Thanks to Marius Tomaschewski for the patch. - imklog: added KeepKernelTimestamp parameter (import from 5.10.2) Thanks to Marius Tomaschewski for the patch. - bugfix: improper handling of backslash in string-type template()s - bugfix: leading quote (") in string-type template() lead to tight loop on startup - bugfix: no error msg on invalid field option in legacy/string template - bugfix: imklog mistakenly took kernel timestamp subseconds as nanoseconds ... actually, they are microseconds. So the fractional part of the timestamp was not properly formatted. (import from 5.10.2) Thanks to Marius Tomaschewski for the bug report and the patch idea. --------------------------------------------------------------------------- Version 7.3.3 [devel] 2012-11-07 - improved disk queue performance - bugfix: dynafile zip files could be corrupted This could happen if a dynafile was destructed before the first write. In practice, this could happen if few lines were written to a file and it then became evicted from the dynafile cache. This would probably look very random, because it depended on the timing in regard to message volume and dynafile cache size. --------------------------------------------------------------------------- Version 7.3.2 [devel] 2012-10-30 - mmnormalize: support for v6+ config interface added - mmjsonparse: support for v6+ config interface added --------------------------------------------------------------------------- Version 7.3.2 [devel] 2012-10-30 - totally reworked ratelimiting and "last message repeated n times" all over rsyslog code. Each of the supported inputs now supports linux-like ratelimiting (formerly only imuxsock did). Also, the "last message repeated n times" is now processed at the input side and no longer at the output side of rsyslog processing. This provides the basis for new future additions as well as usually more performance and a much simpler output part (which can be even further refactored). - imtcp: support for Linux-Type ratelimiting added - imptcp: support for Linux-Type ratelimiting added - imudp enhancements: * support for input batching added (performance improvement) * support for Linux-Type ratelimiting added - permited action-like statements (stop, call, ...) in action lists - bugfix: segfault on startup when modules using MSG_PASSING mode are used - omelasticsearch: support for writing data errors to local file added - omelasticsearch: fix check for bulk processing status response --------------------------------------------------------------------------- Version 7.3.1 [devel] 2012-10-19 - optimized template processing performance, especially for $NOW family of properties - change lumberjack cookie to "@cee:" from "@cee: " CEE originally specified the cookie with SP, whereas other lumberjack tools used it without space. In order to keep interop with lumberjack, we now use the cookie without space as well. I hope this can be changed in CEE as well when it is released at a later time. Thanks to Miloslav Trmač for pointing this out and a similar v7 patch. - bugfix: imuxsock and imklog truncated head of received message This happened only under some circumstances. Thanks to Marius Tomaschewski, Florian Piekert and Milan Bartos for their help in solving this issue. - bugfix: imuxsock did not properly honor $LocalHostIPIF --------------------------------------------------------------------------- Version 7.3.0 [devel] 2012-10-09 - omlibdbi improvements, added * support for config load phases & module() parameters * support for default templates * driverdirectory is now cleanly a global parameter, but can no longer be specified as an action parameter. Note that in previous versions this parameter was ignored in all but the first action definition - improved omfile zip writer to increase compression This was achieved by somewhat reducing the robustness of the zip archive. This is controlled by the new action parameter "VeryReliableZip". ---------------------------------------------------------------------------- Version 7.2.8 [v7-stable] 2013-0?-?? - bugfix: potential segfault on startup when builtin module was specified in module() statement. Thanks to Marius Tomaschewski for reporting the bug. - bugfix: segfault due to invalid dynafile cache handling Accidentally, the old-style cache size parameter was used when the dynafile cache was created in a RainerScript action. If the old-style size was lower than the one actually set, this lead to misaddressing when the size was overrun, and that could lead to all kinds of "interesting things", often in segfaults. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=440 ---------------------------------------------------------------------------- Version 7.2.7 [v7-stable] 2013-04-17 - rsyslogd startup information is now properly conveyed back to init when privileges are being dropped Actually, we have moved termination of the parent in front of the priv drop. So it shall work now in all cases. See code comments in commit for more details. - If forking, the parent now waits for a maximum of 60 seconds for termination by the child - improved debugging support in forked (auto-backgrounding) mode The rsyslog debug log file is now continued to be written across the fork. - updated systemd files to match current systemd source - bugfix: failover/action suspend did not work correctly This was experienced if the retry action took more than one second to complete. For suspending, a cached timestamp was used, and if the retry took longer, that timestamp was already in the past. As a result, the action never was kept in suspended state, and as such no failover happened. The suspend functionality now does no longer use the cached timestamp (should not have any performance implication, as action suspend occurs very infrequently). - bugfix: nested if/prifilt conditions did not work properly closes: http://bugzilla.adiscon.com/show_bug.cgi?id=415 - bugfix: script == comparison did not work properly on JSON objects [backport from 7.3 branch] - bugfix: imudp scheduling parameters did affect main thread, not imudp closes: http://bugzilla.adiscon.com/show_bug.cgi?id=409 - bugfix: imuxsock rate-limiting could not be configured via legacy conf Rate-limiting for the system socket could not be configured via legacy configuration directives. However, the new-style RainerScript config options worked. Thanks to Milan Bartos for the patch. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=390 - bugfix: using group resolution could lead to endless loop Thanks to Tomas Heinrich for the patch. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=310 - bugfix: $mmnormalizeuseramsg parameter was specified with wrong type Thank to Renzhong Zhang for alerting us of the problem. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=420 - bugfix: RainerScript getenv() function caused segfault when var was not found. Thanks to Philippe Muller for the patch. - bugfix: several issues in imkmsg see bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=421#c8 - bugfix: imuxsock was missing SysSock.ParseTrusted module parameter To use that functionality, legacy rsyslog.conf syntax had to be used. Also, the doc was missing information on the "ParseTrusted" set of config directives. - bugfix: parameter action.execOnlyWhenPreviousIsSuspended was accidentally of integer-type. For obvious reasons, it needs to be boolean. Note that this change can break existing configurations if they circumvented the problem by using 0/1 values. - doc bugfix: rsyslog.conf man page had invalid file format info closes: http://bugzilla.adiscon.com/show_bug.cgi?id=418 ---------------------------------------------------------------------------- Version 7.2.6 [v7-stable] 2013-03-05 - slightly improved config parser error messages when invalid escapes happen - bugfix: include files got included in the wrong order closes: http://bugzilla.adiscon.com/show_bug.cgi?id=411 This happens if an $IncludeConfig directive was done on multiple files (e.g. the distro default of $IncludeConfig /etc/rsyslog.d/*.conf). In that case, the order of include file processing is reversed, which could lead to all sorts of problems. Thanks to Nathan Stratton Treadway for his great analysis of the problem, which made bug fixing really easy. - bugfix: omelasticsearch failed when authentication data was provided ... at least in most cases it emitted an error message: "snprintf failed when trying to build auth string" Thanks to Joerg Heinemann for alerting us. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=404 - bugfix: some property-based filter were incorrectly parsed This usually lead to a syntax error on startup and rsyslogd not actually starting up. The problem was the regex, which did not care for double quote characters to follow in the action part - unfortunately something that can frequently happen with v6+ format. An example: :programname, isequal, "as" {action(type="omfile" ...) } Here, the part :programname, isequal, "as" {action(type="omfile" was treated as the property filter, and the rest as action part. Obviously, this did not work out. Unfortunately, such situations usually resulted in very hard to understand error messages. ---------------------------------------------------------------------------- Version 7.2.5 [v7-stable] 2013-01-08 - build system cleanup (thanks to Michael Biebl for this!) - bugfix: omelasticsearch did not properly compile on some platforms due to missing libmath. Thanks to Michael Biebl for the fix - bugfix: invalid DST handling under Solaris Thanks to Scott Severtson for the patch. - bugfix: on termination, actions were incorrectly called The problem was that incomplete fiter evaluation was done *during the shutdown phase*. This affected only the LAST batches being processed. No problem existed during the regular run. Could usually only happen on very busy systems, which were still busy during shutdown. - bugfix: very large memory consumption (and probably out of memory) when FromPos was specified in template, but ToPos not. Thanks to Radu Gheorghe for alerting us of this bug. - bugfix: timeval2syslogTime cause problems on some platforms due to invalid assumption on structure data types. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=394 Thanks to David Hill for the patch [under ASL2.0 as per email conversation 2013-01-03]. - bugfix: compile errors in im3195 Thanks to Martin Körper for the patch - bugfix: doGetFileCreateMode() had invalid validity check ;) Thanks to Chandler Latour for the patch. - bugfix: mmjsonparse erroneously returned action error when no CEE cookie was present. ---------------------------------------------------------------------------- Version 7.2.4 [v7-stable] 2012-12-07 - enhance: permit RFC3339 timestamp in local log socket messages Thanks to Sebastien Ponce for the patch. - imklog: added ParseKernelTimestamp parameter (import from 5.10.2) Thanks to Marius Tomaschewski for the patch. - fix missing functionality: ruleset(){} could not specify ruleset queue The "queue.xxx" parameter set was not supported, and legacy ruleset config statements did not work (by intention). The fix introduces the "queue.xxx" parameter set. It has some regression potential, but only for the new functionality. Note that using that interface it is possible to specify duplicate queue file names, which will cause trouble. This will be solved in v7.3, because there is a too-large regression potential for the v7.2 stable branch. - imklog: added KeepKernelTimestamp parameter (import from 5.10.2) Thanks to Marius Tomaschewski for the patch. - bugfix: imklog mistakenly took kernel timestamp subseconds as nanoseconds ... actually, they are microseconds. So the fractional part of the timestamp was not properly formatted. (import from 5.10.2) Thanks to Marius Tomaschewski for the bug report and the patch idea. - bugfix: supportoctetcountedframing parameter did not work in imptcp - bugfix: modules not (yet) supporting new conf format were not properly registered. This lead to a "module not found" error message instead of the to-be-expected "module does not support new style" error message. That invalid error message could be quite misleading and actually stop people from addressing the real problem (aka "go nuts" ;)) - bugfix: template "type" parameter is mandatory (but was not) - bugfix: some message properties could be garbled due to race condition This happened only on very high volume systems, if the same message was being processed by two different actions. This was a regression caused by the new config processor, which did no longer properly enable msg locking in multithreaded cases. The bugfix is actually a refactoring of the msg locking code - we no longer do unlocked operations, as the use case for it has mostly gone away. It is potentially possible only at very low-end systems, and there the small additional overhead of doing the locking does not really hurt. Instead, the removal of that capability can actually slightly improve performance in common cases, as the code path is smaller and requires slightly less memory writes. That probably outperforms the extra locking overhead (which in the low-end case always happens in user space, without need for kernel support as we can always directly acquire the lock - there is no contention at all). ---------------------------------------------------------------------------- Version 7.2.3 [v7-stable] 2012-10-21 - regression fix: rsyslogd terminated when wild-card $IncludeConfig did not find actual include files. For example, if this directive is present: $IncludeConfig /etc/rsyslog.d/*.conf and there are no *.conf files in /etc/rsyslog.d (but rsyslog.d exists), rsyslogd will emit an error message and terminate. Previous (and expected) behavior is that an empty file set is no problem. HOWEVER, if the directory itself does not exist, this is flagged as an error and will load to termination (no startup). Unfortunately, this is often the case by default in many distros, so this actually prevents rsyslog startup. ---------------------------------------------------------------------------- Version 7.2.2 [v7-stable] 2012-10-16 - doc improvements - enabled to build without libuuid, at loss of uuid functionality this enables smoother builds on older systems that do not support libuuid. Loss of functionality should usually not matter too much as uuid support has only recently been added and is very seldom used. - bugfix: omfwd did not properly support "template" parameter - bugfix: potential segfault when re_match() function was used Thanks to oxpa for the patch. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=371 - bugfix: potential abort of imtcp on rsyslogd shutdown - bugfix: imzmq3 segfault with PULL subscription Thanks to Martin Nilsson for the patch. - bugfix: improper handling of backslash in string-type template()s - bugfix: leading quote (") in string-type template() lead to tight loop on startup - bugfix: no error msg on invalid field option in legacy/string template - bugfix: potential segfault due to invalid param handling in comparisons This could happen in RainerScript comparisons (like contains); in some cases an uninitialized variable was accessed, which could lead to an invalid free and in turn to a segfault. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=372 Thanks to Georgi Georgiev for reporting this bug and his great help in solving it. - bugfix: no error msg on unreadable $IncludeConfig path - bugfix: $IncludeConfig did not correctly process directories closes: http://bugzilla.adiscon.com/show_bug.cgi?id=376 The testbench was also enhanced to check for these cases. Thanks to Georgi Georgiev for the bug report. - bugfix: make rsyslog compile on kfreebsd again closes: http://bugzilla.adiscon.com/show_bug.cgi?id=380 Thanks to Guillem Jover for the patch. - bugfix: garbled message if field name was used with jsonf property option The length for the field name was invalidly computed, resulting in either truncated field names or including extra random data. If the random data contained NULs, the rest of the message became unreadable. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=374 - bugfix: potential segfault at startup with property-based filter If the property name was followed by a space before the comma, rsyslogd aborted on startup. Note that no segfault could happen if the initial startup went well (this was a problem with the config parser). closes: http://bugzilla.adiscon.com/show_bug.cgi?id=381 - bugfix: imfile discarded some file parts File lines that were incomplete (LF missing) *at the time imfile polled the file* were partially discarded. That part of the line that was read without the LF was discarded, and the rest of the line was submitted in the next polling cycle. This is now changed so that the partial content is saved until the complete line is read. Note that the patch affects only read mode 0. Thanks to Milan Bartos for providing the base idea for the solution. ---------------------------------------------------------------------------- Version 7.2.1 [v7-stable] 2012-10-29 - bugfix: ruleset()-object did only support a single statement - added -D rsyslogd option to enable config parser debug mode - improved syntax error messages by outputting the error token - the rsyslog core now suspends actions after 10 failures in a row This was former the case after 1,000 failures and could cause rsyslog to be spammed/resources misused. See the v6 compatibility doc for more details. - ommongodb rate-limits error messages to prevent spamming the syslog closes (for v7.2): http://bugzilla.adiscon.com/show_bug.cgi?id=366 ---------------------------------------------------------------------------- Version 7.2.0 [v7-stable] 2012-10-22 This starts a new stable branch based on 7.1.12 plus the following changes: - bugfix: imuxsock did not properly honor $LocalHostIPIF - omruleset/omdiscard do no longer issue "deprecated" warnings, as 7.1 grammar does not permit to use the replacements under all circumstances ---------------------------------------------------------------------------- Version 7.1.12 [beta] 2012-10-18 - minor updates to better support newer systemd developments Thanks to Michael Biebl for the patches. - build system cleanup Thanks to Michael Biebl for the patch series. - cleanup: removed remains of -c option (compatibility mode) both from code & doc and emitted warning message if still used closes: http://bugzilla.adiscon.com/show_bug.cgi?id=361 Thanks to Michael Biebl for reporting & suggestions - bugfix: imklog truncated head of received message This happened only under some circumstances. Thanks to Marius Tomaschewski and Florian Piekert for their help in solving this issue. ---------------------------------------------------------------------------- Version 7.1.11 [beta] 2012-10-16 - bugfix: imuxsock truncated head of received message This happened only under some circumstances. Thanks to Marius Tomaschewski, Florian Piekert and Milan Bartos for their help in solving this issue. - bugfix: do not crash if set statement is used with date field Thanks to Miloslav Trmač for the patch. - change lumberjack cookie to "@cee:" from "@cee: " CEE originally specified the cookie with SP, whereas other lumberjack tools used it without space. In order to keep interop with lumberjack, we now use the cookie without space as well. I hope this can be changed in CEE as well when it is released at a later time. Thanks to Miloslav Trmač for pointing this out and a similar v7 patch. - added deprecated note to omruleset (plus clue to use "call") - added deprecated note to discard action (plus clue to use "stop") --------------------------------------------------------------------------- Version 7.1.10 [beta] 2012-10-11 - bugfix: m4 directory was not present in release tarball - bugfix: small memory leak with string-type templates - bugfix: small memory leak when template was specified in omfile - bugfix: some config processing warning messages were treated as errors - bugfix: small memory leak when processing action() statements - bugfix: unknown action() parameters were not reported --------------------------------------------------------------------------- Version 7.1.9 [beta] 2012-10-09 - bugfix: comments inside objects (e.g. action()) were not properly handled - bugfix: in (non)equal comparisons the position of arrays influenced result This behavior is OK for "contains"-type of comparisons (which have quite different semantics), but not for == and <>, which shall be commutative. This has been fixed now, so there is no difference any longer if the constant string array is the left or right hand operand. We solved this via the optimizer, as it keeps the actual script execution code small. --------------------------------------------------------------------------- Version 7.1.8 [beta] 2012-10-02 - bugfix: ruleset(){} directive erroneously changed default ruleset much like the $ruleset legacy conf statement. This potentially lead to statements being assigned to the wrong ruleset. - improved module doc - added "parser" parameter to ruleset(), so that parser chain can be configured - implemented "continue" RainerScript statement --------------------------------------------------------------------------- Version 7.1.7 [devel] 2012-10-01 - implemented RainerScript "call" statement - implemented RainerScript array-based string comparison operations - implemented imtcp "permittedPeers" module-global parameter - imudp: support for specifying multiple ports via array added --------------------------------------------------------------------------- Version 7.1.6 [devel] 2012-09-28 - implemented RainerScript input() statement, including support for it in major input plugins - implemented RainerScript ruleset() statement --------------------------------------------------------------------------- Version 7.1.5 [devel] 2012-09-25 - implemented RainerScript prifield() function - implemented RainerScript field() function - added new module imkmsg to process structured kernel log Thanks to Milan Bartos for contributing this module - implemented basic RainerScript optimizer, which will speed up script operations - bugfix: invalid free if function re_match() was incorrectly used if the config file parser detected that param 2 was not constant, some data fields were not initialized. The destructor did not care about that. This bug happened only if rsyslog startup was unclean. --------------------------------------------------------------------------- Version 7.1.4 [devel] 2012-09-19 - implemented ability for CEE-based properties to be stored in disk queues - implemented string concatenation in expressions via &-operator - implemented json subtree copy in variable assignment - implemented full JSON support for variable manipulation - introduced "subtree"-type templates - bugfix: omfile action did not respect "template" parameter ... and used default template in all cases - bugfix: MsgDup() did not copy CEE structure This function was called at various places, most importantly during "last messages repeated n times" processing and omruleset. If CEE(JSON) data was present, it was lost as part of the copy process. - bugfix: debug output indicated improper queue type --------------------------------------------------------------------------- Version 7.1.3 [devel] 2012-09-17 - introduced "set" and "unset" config statements - bugfix: missing support for escape sequences in RainerScript only \' was supported. Now the usual set is supported. Note that v5 used \x as escape where x was any character (e.g. "\n" meant "n" and NOT LF). This also means there is some incompatibility to v5 for well-know sequences. Better break it now than later. - bugfix: invalid property name in property-filter could cause abort if action chaining (& operator) was used http://bugzilla.adiscon.com/show_bug.cgi?id=355 Thanks to pilou@gmx.com for the bug report --------------------------------------------------------------------------- Version 7.1.2 [devel] 2012-09-12 - bugfix: messages were duplicated, sometimes massively regression from new code in 7.1.1 and reason for early release - bugfix: remove invalid socket option call from imuxsock Thanks to Cristian Ionescu-Idbohrn and Jonny Törnbom - bugfix: abort when invalid property name was configured in property-based filter - bugfix: multiple rulesets did no longer work correctly (7.1.1 regression) --------------------------------------------------------------------------- Version 7.1.1 [devel] 2012-09-11 - MAJOR NEW FEATURE: ruleengine now fully supports nesting including if ... then ... else ... constructs. This is a big change and it obviously has a lot of bug potential. - BSD-style (filter) blocks are no longer supported see https://www.rsyslog.com/g/BSD for details and solution - imuxsock now stores trusted properties by default in the CEE root This was done in order to keep compatible with other implementations of the lumberjack schema Thanks to Miloslav Trmač for pointing to this. - bugfix: string-generating templates caused abort if CEE field could not be found --------------------------------------------------------------------------- Version 7.1.0 [devel] 2012-09-06 - added support for hierarchical properties (CEE/lumberjack) - added pure JSON output plugin parameter passing mode - ommongodb now supports templates - bugfix: imtcp could abort on exit due to invalid free() - imported bugfixes from 6.4.1 --------------------------------------------------------------------------- Version 6.6.1 [v6-stable] 2012-10-?? - bugfix: build problems on some platforms - bugfix: misaddressing of $mmnormalizeuserawmsg parameter On many platforms, this has no effect at all. At some, it may cause a segfault. The problem occurs only during config phase, no segfault happens when rsyslog has fully started. - fix API "glitch" in some plugins This did not affect users, but could have caused trouble in the future for developers. - bugfix: no error msg on invalid field option in legacy/string template - bugfix: no error msg on unreadable $IncludeConfig path - bugfix: $IncludeConfig did not correctly process directories closes: http://bugzilla.adiscon.com/show_bug.cgi?id=376 The testbench was also enhanced to check for these cases. Thanks to Georgi Georgiev for the bug report. - bugfix: spurios error messages from imuxsock about (non-error) EAGAIN Thanks to Marius Tomaschewski for the patch. - imklog: added $klogParseKernelTimestamp option When enabled, kernel message [timestamp] is converted for message time. Default is to use receive time as in 5.8.x and before, because the clock used to create the timestamp is not supposed to be as accurate as the monotonic clock (depends on hardware and kernel) resulting in differences between kernel and system messages which occurred at same time. Thanks to Marius Tomaschewski for the patch. - imklog: added $klogKeepKernelTimestamp option When enabled, the kernel [timestamp] remains at begin of each message, even it is used for the message time too. Thanks to Marius Tomaschewski for the patch. - bugfix: imklog mistakenly took kernel timestamp subseconds as nanoseconds ... actually, they are microseconds. So the fractional part of the timestamp was not properly formatted. Thanks to Marius Tomaschewski for the bug report and the patch idea. - bugfix: hostname set in rsyslog.conf was not picked up until HUP which could also mean "never" or "not for a very long time". Thanks to oxpa for providing analysis and a patch - bugfix: some message properties could be garbled due to race condition This happened only on very high volume systems, if the same message was being processed by two different actions. This was a regression caused by the new config processor, which did no longer properly enable msg locking in multithreaded cases. The bugfix is actually a refactoring of the msg locking code - we no longer do unlocked operations, as the use case for it has mostly gone away. It is potentially possible only at very low-end systems, and there the small additional overhead of doing the locking does not really hurt. Instead, the removal of that capability can actually slightly improve performance in common cases, as the code path is smaller and requires slightly less memory writes. That probably outperforms the extra locking overhead (which in the low-end case always happens in user space, without need for kernel support as we can always directly acquire the lock - there is no contention at all). - bugfix: invalid DST handling under Solaris Thanks to Scott Severtson for the patch. --------------------------------------------------------------------------- Version 6.6.0 [v6-stable] 2012-10-22 This starts a new stable branch, based on the 6.5.x series, plus: - bugfix: imuxsock did not properly honor $LocalHostIPIF --------------------------------------------------------------------------- Version 6.5.1 [beta] 2012-10-11 - added tool "logctl" to handle lumberjack logs in MongoDB - imfile ported to new v6 config interface - imfile now supports config parameter for maximum number of submits which is a fine-tuning parameter in regard to input batching - added pure JSON output plugin parameter passing mode - ommongodb now supports templates - bugfix: imtcp could abort on exit due to invalid free() - bugfix: remove invalid socket option call from imuxsock Thanks to Cristian Ionescu-Idbohrn and Jonny Törnbom - added pure JSON output plugin parameter passing mode - ommongodb now supports templates - bugfix: imtcp could abort on exit due to invalid free() - bugfix: missing support for escape sequences in RainerScript only \' was supported. Now the usual set is supported. Note that v5 used \x as escape where x was any character (e.g. "\n" meant "n" and NOT LF). This also means there is some incompatibility to v5 for well-know sequences. Better break it now than later. - bugfix: small memory leaks in template() statements these were one-time memory leaks during startup, so they did NOT grow during runtime - bugfix: config validation run did not always return correct return state - bugfix: config errors did not always cause statement to fail This could lead to startup with invalid parameters. --------------------------------------------------------------------------- Version 6.5.0 [devel] 2012-08-28 - imrelp now supports non-cancel thread termination (but now requires at least librelp 1.0.1) - implemented freeCnf() module interface This was actually not present in older versions, even though some modules already used it. The implementation was now done, and not in 6.3/6.4 because the resulting memory leak was ultra-slim and the new interface handling has some potential to seriously break things. Not the kind of thing you want to add in late beta state, if avoidable. - added --enable-debugless configure option for very high demanding envs This actually at compile time disables a lot of debug code, resulting in some speedup (but serious loss of debugging capabilities) - added new 0mq plugins (via czmq lib) Thanks to David Kelly for contributing these modules - bugfix: omhdfs did no longer compile - bugfix: SystemLogSocketAnnotate did not work correctly Thanks to Miloslav Trmač for the patch - $SystemLogParseTrusted config file option Thanks to Milan Bartos for the patch - added template config directive - added new uuid message property Thanks to Jérôme Renard for the idea and patches. Note: patches were released under ASL 2.0, see http://bugzilla.adiscon.com/show_bug.cgi?id=353 --------------------------------------------------------------------------- Version 6.4.3 [V6-STABLE/NEVER RELEASED] 2012-??-?? This version was never released as 6.6.0 came quickly enough. Note that all these patches here are present in 6.6.0. - cleanup: removed remains of -c option (compatibility mode) both from code & doc and emitted warning message if still used closes: http://bugzilla.adiscon.com/show_bug.cgi?id=361 Thanks to Michael Biebl for reporting & suggestions - bugfix: imuxsock and imklog truncated head of received message This happened only under some circumstances. Thanks to Marius Tomaschewski, Florian Piekert and Milan Bartos for their help in solving this issue. - change lumberjack cookie to "@cee:" from "@cee: " CEE originally specified the cookie with SP, whereas other lumberjack tools used it without space. In order to keep interop with lumberjack, we now use the cookie without space as well. I hope this can be changed in CEE as well when it is released at a later time. Thanks to Miloslav Trmač for pointing this out and a similar v7 patch. - bugfix: comments inside objects (e.g. action()) were not properly handled - bugfix: sysklogd-emulating standard template was no longer present in v6 This was obviously lost during the transition to the new config format. Thanks to Milan Bartos for alerting us and a patch! - bugfix: some valid legacy PRI filters were flagged as erroneous closes: http://bugzilla.adiscon.com/show_bug.cgi?id=358 This happened to filters of the style "local0,local1.*", where the multiple facilities were comma-separated. - bugfix: imuxsock did not properly honor $LocalHostIPIF --------------------------------------------------------------------------- Version 6.4.2 [V6-STABLE] 2012-09-20 - bugfix: potential abort, if action queue could not be properly started This most importantly could happen due to configuration errors. - bugfix: remove invalid socket option call from imuxsock Thanks to Cristian Ionescu-Idbohrn and Jonny Törnbom - bugfix: missing support for escape sequences in RainerScript only \' was supported. Now the usual set is supported. Note that v5 used \x as escape where x was any character (e.g. "\n" meant "n" and NOT LF). This also means there is some incompatibility to v5 for well-know sequences. Better break it now than later. - bugfix: config validation run did not always return correct return state --------------------------------------------------------------------------- Version 6.4.1 [V6-STABLE] 2012-09-06 - bugfix: multiple main queues with same queue file name were not detected This lead to queue file corruption. While the root cause is a config error, it is a bug that this important and hard to find config error was not detected by rsyslog. - bugfix: "jsonf" property replacer option did generate invalid JSON in JSON, we have "fieldname":"value", but the option emitted "fieldname"="value". Interestingly, this was accepted by a couple of sinks, most importantly elasticsearch. Now the correct format is emitted, which causes a remote chance that some things that relied on the wrong format will break. Thanks to Miloslav Trmač for the patch - change $!all-json did emit an empty (thus non-JSON) string if no libee data was present. It now emits {} and thus valid JSON. There is a small risk that this may break some things that relied on the previous inconsistency. Thanks to Miloslav Trmač for the patch - bugfix: omusrmsg incorrect return state & config warning handling During config file processing, Omusrmsg often incorrectly returned a warning status, even when no warning was present (caused by uninitialized variable). Also, the core handled warning messages incorrectly, and treated them as errors. As a result, omusrmsg (most often) could not properly be loaded. Note that this only occurs with legacy config action syntax. This was a regression caused by an incorrect merge in to the 6.3.x codebase. Thanks to Stefano Mason for alerting us of this bug. - bugfix: Fixed TCP CheckConnection handling in omfwd.c. Interface needed to be changed in lower stream classes. Syslog TCP Sending is now resumed properly. Unfixed, that lead to non-detection of downstate of remote hosts. --------------------------------------------------------------------------- Version 6.4.0 [V6-STABLE] 2012-08-20 - THIS IS THE FIRST VERSION OF THE 6.4.x STABLE BRANCH It includes all enhancements made in 6.3.x plus what is written in the ChangeLog below. - omelasticsearch: support for parameters parent & dynparent added - bugfix: imtcp aborted when more than 2 connections were used. Incremented pthread stack size to 4MB for imtcp, imptcp and imttcp closes: http://bugzilla.adiscon.com/show_bug.cgi?id=342 - bugfix: imptcp aborted when $InputPTCPServerBindRuleset was used - bugfix: problem with cutting first 16 characters from message with bAnnotate Thanks to Milan Bartos for the patch. --------------------------------------------------------------------------- Version 6.3.12 [BETA] 2012-07-02 - support for elasticsearch via omelasticsearch added Note that this module has been tested quite well by a number of folks, and this is why we merge in new functionality in a late beta stage. Even if problems would exist, only users of omelasticsearch would experience them, making it a pretty safe addition. - bugfix: $ActionName was not properly honored Thanks to Abby Edwards for alerting us --------------------------------------------------------------------------- Version 6.3.11 [BETA] 2012-06-18 - bugfix: expression-based filters with AND/OR could segfault due to a problem with boolean shortcut operations. From the user's perspective, the segfault is almost non-deterministic (it occurs when a shortcut is used). Thanks to Lars Peterson for providing the initial bug report and his support in solving it. - bugfix: "last message repeated n times" message was missing hostname Thanks to Zdenek Salvet for finding this bug and to Bodik for reporting --------------------------------------------------------------------------- Version 6.3.10 [BETA] 2012-06-04 - bugfix: delayable source could block action queue, even if there was a disk queue associated with it. The root cause of this problem was that it makes no sense to delay messages once they arrive in the action queue - the "input" that is being held in that case is the main queue worker, what makes no sense. Thanks to Marcin for alerting us on this problem and providing instructions to reproduce it. - bugfix: invalid free in imptcp could lead to abort during startup - bugfix: if debug message could end up in log file when forking if rsyslog was set to auto-background (thus fork, the default) and debug mode to stdout was enabled, debug messages ended up in the first log file opened. Currently, stdout logging is completely disabled in forking mode (but writing to the debug log file is still possible). This is a change in behavior, which is under review. If it causes problems to you, please let us know. Thanks to Tomas Heinrich for the patch. - bugfix: --enable-smcustbindcdr configure directive did not work closes: http://bugzilla.adiscon.com/show_bug.cgi?id=330 Thanks to Ultrabug for the patch. - bugfix: made rsyslog compile when libestr ist not installed in /usr Thanks to Miloslav Trmač for providing patches and suggestions --------------------------------------------------------------------------- Version 6.3.9 [BETA] 2012-05-22 - bugfix: imtcp could cause hang during reception this also applied to other users of core file tcpsrv.c, but imtcp was by far the most prominent and widely-used, the rest rather exotic (like imdiag) - added capability to specify substrings for field extraction mode - added the "jsonf" property replacer option (and fieldname) - bugfix: omudpspoof did not work correctly if no spoof hostname was configured - bugfix: property replacer option "json" could lead to content loss message was truncated if escaping was necessary - bugfix: assigned ruleset was lost when using disk queues This looked quite hard to diagnose for disk-assisted queues, as the pure memory part worked well, but ruleset info was lost for messages stored inside the disk queue. - bugfix/imuxsock: solving abort if hostname was not set; configured hostname was not used (both merge regressions) -bugfix/omfile: template action parameter was not accepted (and template name set to "??" if the parameter was used) Thanks to Brian Knox for alerting us on this bug. - bugfix: ommysql did not properly init/exit the mysql runtime library this could lead to segfaults. Triggering condition: multiple action instances using ommysql. Thanks to Tomas Heinrich for reporting this problem and providing an initial patch (which my solution is based on, I need to add more code to clean the mess up). - bugfix: rsyslog did not terminate when delayable inputs were blocked due to unavailable sources. Fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=299 Thanks to Marcin M for bringing up this problem and Andre Lorbach for helping to reproduce and fix it. - added capability to specify substrings for field extraction mode - bugfix: disk queue was not persisted on shutdown, regression of fix to http://bugzilla.adiscon.com/show_bug.cgi?id=299 The new code also handles the case of shutdown of blocking light and full delayable sources somewhat smarter and permits, assuming sufficient timeouts, to persist message up to the max queue capacity. Also some nits in debug instrumentation have been fixed. --------------------------------------------------------------------------- Version 6.3.8 [DEVEL] 2012-04-16 - added $PStatJSON directive to permit stats records in JSON format - added "date-unixtimestamp" property replacer option to format as a unix timestamp (seconds since epoch) - added "json" property replacer option to support JSON encoding on a per-property basis - added omhiredis (contributed module) - added mmjsonparse to support recognizing and parsing JSON enhanced syslog messages - upgraded more plugins to support the new v6 config format: - ommysql - omlibdbi - omsnmp - added configuration directives to customize queue light delay marks $MainMsgQueueLightDelayMark, $ActionQueueLightDelayMark; both specify number of messages starting at which a delay happens. - added message property parsesuccess to indicate if the last run higher-level parser could successfully parse the message or not (see property replacer html doc for details) - bugfix: abort during startup when rsyslog.conf v6+ format was used in a certain way - bugfix: property $!all-json made rsyslog abort if no normalized data was available - bugfix: memory leak in array passing output module mode - added configuration directives to customize queue light delay marks - permit size modifiers (k,m,g,...) in integer config parameters Thanks to Jo Rhett for the suggestion. - bugfix: hostname was not requeried on HUP Thanks to Per Jessen for reporting this bug and Marius Tomaschewski for his help in testing the fix. - bugfix: imklog invalidly computed facility and severity closes: http://bugzilla.adiscon.com/show_bug.cgi?id=313 - added configuration directive to disable octet-counted framing for imtcp, directive is $InputTCPServerSupportOctetCountedFraming for imptcp, directive is $InputPTCPServerSupportOctetCountedFraming - added capability to use a local interface IP address as fromhost-ip for locally originating messages. New directive $LocalHostIPIF --------------------------------------------------------------------------- Version 6.3.7 [DEVEL] 2012-02-02 - imported refactored v5.9.6 imklog linux driver, now combined with BSD driver - removed imtemplate/omtemplate template modules, as this was waste of time The actual input/output modules are better copy templates. Instead, the now-removed modules cost time for maintenance AND often caused confusion on what their role was. - added a couple of new stats objects - improved support for new v6 config system. The build-in output modules now all support the new config language - bugfix: facility local was not correctly interpreted in legacy filters Was only accepted if it was the first PRI in a multi-filter PRI. Thanks to forum user Mark for bringing this to our attention. - bugfix: potential abort after reading invalid X.509 certificate closes: http://bugzilla.adiscon.com/show_bug.cgi?id=290 Thanks to Tomas Heinrich for the patch - bugfix: legacy parsing of some filters did not work correctly - bugfix: rsyslog aborted during startup if there is an error in loading an action and legacy configuration mode is used - bugfix: bsd klog driver did no longer compile - relicensed larger parts of the code under Apache (ASL) 2.0 --------------------------------------------------------------------------- Version 6.3.6 [DEVEL] 2011-09-19 - added $InputRELPServerBindRuleset directive to specify rulesets for RELP - bugfix: config parser did not support properties with dashes in them inside property-based filters. Thanks to Gerrit Seré for reporting this. --------------------------------------------------------------------------- Version 6.3.5 [DEVEL] (rgerhards/al), 2011-09-01 - bugfix/security: off-by-two bug in legacy syslog parser, CVE-2011-3200 - bugfix: mark message processing did not work correctly - imudp&imtcp now report error if no listener at all was defined Thanks to Marcin for suggesting this error message. - bugfix: potential misaddressing in property replacer --------------------------------------------------------------------------- Version 6.3.4 [DEVEL] (rgerhards), 2011-08-02 - added support for action() config object * in rsyslog core engine * in omfile * in omusrmsg - bugfix: omusrmsg format usr1,usr2 was no longer supported - bugfix: misaddressing in config handler In theory, can cause segfault, in practice this is extremely unlikely Thanks to Marcin for alerting me. --------------------------------------------------------------------------- Version 6.3.3 [DEVEL] (rgerhards), 2011-07-13 - rsyslog.conf format: now parsed by RainerScript parser this provides the necessary base for future enhancements as well as some minor immediate ones. For details see: http://blog.gerhards.net/2011/07/rsyslog-633-config-format-improvements.html - performance of script-based filters notably increased - removed compatibility mode as we expect people have adjusted their confs by now - added support for the ":omfile:" syntax for actions --------------------------------------------------------------------------- Version 6.3.2 [DEVEL] (rgerhards), 2011-07-06 - added support for the ":omusrmsg:" syntax in configuring user messages - systemd support: set stdout/stderr to null - thx to Lennart for the patch - added support for obtaining timestamp for kernel message from message If the kernel time-stamps messages, time is now take from that timestamp instead of the system time when the message was read. This provides much better accuracy. Thanks to Lennart Poettering for suggesting this feature and his help during implementation. - added support for obtaining timestamp from system for imuxsock This permits to read the time a message was submitted to the system log socket. Most importantly, this is provided in microsecond resolution. So we are able to obtain high precision timestampis even for messages that were - as is usual - not formatted with them. This also simplifies things in regard to local time calculation in chroot environments. Many thanks to Lennart Poettering for suggesting this feature, providing some guidance on implementing it and coordinating getting the necessary support into the Linux kernel. - bugfix: timestamp was incorrectly calculated for timezones with minute offset closes: http://bugzilla.adiscon.com/show_bug.cgi?id=271 - bugfix: memory leak in imtcp & subsystems under some circumstances This leak is tied to error conditions which lead to incorrect cleanup of some data structures. --------------------------------------------------------------------------- Version 6.3.1 [DEVEL] (rgerhards), 2011-06-07 - added a first implementation of a DNS name cache this still has a couple of weaknesses, like no expiration of entries, suboptimal algorithms -- but it should perform much better than what we had previously. Implementation will be improved based on feedback during the next couple of releases --------------------------------------------------------------------------- Version 6.3.0 [DEVEL] (rgerhards), 2011-06-01 - introduced new config system http://blog.gerhards.net/2011/06/new-rsyslog-config-system-materializes.html --------------------------------------------------------------------------- Version 6.2.2 [v6-stable], 2012-06-13 - build system improvements and spec file templates Thanks to Abby Edwards for providing these enhancements - bugfix: disk queue was not persisted on shutdown, regression of fix to http://bugzilla.adiscon.com/show_bug.cgi?id=299 The new code also handles the case of shutdown of blocking light and full delayable sources somewhat smarter and permits, assuming sufficient timeouts, to persist message up to the max queue capacity. Also some nits in debug instrumentation have been fixed. - bugfix: --enable-smcustbindcdr configure directive did not work closes: http://bugzilla.adiscon.com/show_bug.cgi?id=330 Thanks to Ultrabug for the patch. - add small delay (50ms) after sending shutdown message There seem to be cases where the shutdown message is otherwise not processed, not even on an idle system. Thanks to Marcin for bringing this problem up. - support for resolving huge groups closes: http://bugzilla.adiscon.com/show_bug.cgi?id=310 Thanks to Alec Warner for the patch - bugfix: potential hang due to mutex deadlock closes: http://bugzilla.adiscon.com/show_bug.cgi?id=316 Thanks to Andreas Piesk for reporting&analyzing this bug as well as providing patches and other help in resolving it. - bugfix: property PROCID empty instead of proper nilvalue if not present If it is not present, it must have the nilvalue "-" as of RFC5424 closes: http://bugzilla.adiscon.com/show_bug.cgi?id=332 Thanks to John N for reporting this issue. - bugfix: did not compile under solaris due to $uptime property code For the time being, $uptime is not supported on Solaris - bugfix: "last message repeated n times" message was missing hostname Thanks to Zdenek Salvet for finding this bug and to Bodik for reporting --------------------------------------------------------------------------- Version 6.2.1 [v6-stable], 2012-05-10 - change plugin config interface to be compatible with pre-v6.2 system The functionality was already removed (because it is superseded by the v6.3+ config language), but code was still present. I have now removed those parts that affect interface. Full removal will happen in v6.3, in order to limit potential regressions. However, it was considered useful enough to do the interface change in v6-stable; this also eases merging branches! - re-licensed larger parts of the codebase under the Apache license 2.0 - bugfix: omprog made rsyslog abort on startup if not binary to execute was configured - bugfix: imklog invalidly computed facility and severity closes: http://bugzilla.adiscon.com/show_bug.cgi?id=313 - bugfix: stopped DA queue was never processed after a restart due to a regression from statistics module - bugfix: memory leak in array passing output module mode - bugfix: ommysql did not properly init/exit the mysql runtime library this could lead to segfaults. Triggering condition: multiple action instances using ommysql. Thanks to Tomas Heinrich for reporting this problem and providing an initial patch (which my solution is based on, I need to add more code to clean the mess up). - bugfix: rsyslog did not terminate when delayable inputs were blocked due to unavailable sources. Fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=299 Thanks to Marcin M for bringing up this problem and Andre Lorbach for helping to reproduce and fix it. - bugfix/tcpflood: sending small test files did not work correctly --------------------------------------------------------------------------- Version 6.2.0 [v6-stable], 2012-01-09 - bugfix (kind of): removed numerical part from pri-text see v6 compatibility document for reasons - bugfix: race condition when extracting program name, APPNAME, structured data and PROCID (RFC5424 fields) could lead to invalid characters e.g. in dynamic file names or during forwarding (general malfunction of these fields in templates, mostly under heavy load) - bugfix: imuxsock did no longer ignore message-provided timestamp, if so configured (the *default*). Lead to no longer sub-second timestamps. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=281 - bugfix: omfile returns fatal error code for things that go really wrong previously, RS_RET_RESUME was returned, which lead to a loop inside the rule engine as omfile could not really recover. - bugfix: potential abort after reading invalid X.509 certificate closes: http://bugzilla.adiscon.com/show_bug.cgi?id=290 Thanks to Tomas Heinrich for the patch - enhanced module loader to not rely on PATH_MAX - imuxsock: added capability to "annotate" messages with "trusted information", which contains some properties obtained from the system and as such sure to not be faked. This is inspired by the similar idea introduced in systemd. --------------------------------------------------------------------------- Version 6.1.12 [BETA], 2011-09-01 - bugfix/security: off-by-two bug in legacy syslog parser, CVE-2011-3200 - bugfix: mark message processing did not work correctly - bugfix: potential misaddressing in property replacer - bugfix: memcpy overflow can occur in allowed sender checking if a name is resolved to IPv4-mapped-on-IPv6 address Found by Ismail Dönmez at suse - bugfix: The NUL-Byte for the syslogtag was not copied in MsgDup (msg.c) - bugfix: fixed incorrect state handling for Discard Action (transactions) Note: This caused all messages in a batch to be set to COMMITTED, even if they were discarded. --------------------------------------------------------------------------- Version 6.1.11 [BETA] (rgerhards), 2011-07-11 - systemd support: set stdout/stderr to null - thx to Lennart for the patch - added support for the ":omusrmsg:" syntax in configuring user messages - added support for the ":omfile:" syntax in configuring user messages --------------------------------------------------------------------------- Version 6.1.10 [BETA] (rgerhards), 2011-06-22 - bugfix: problems in failover action handling closes: http://bugzilla.adiscon.com/show_bug.cgi?id=270 closes: http://bugzilla.adiscon.com/show_bug.cgi?id=254 - bugfix: mutex was invalidly left unlocked during action processing At least one case where this can occur is during thread shutdown, which may be initiated by lower activity. In most cases, this is quite unlikely to happen. However, if it does, data structures may be corrupted which could lead to fatal failure and segfault. I detected this via a testbench test, not a user report. But I assume that some users may have had unreproducable aborts that were cause by this bug. --------------------------------------------------------------------------- Version 6.1.9 [BETA] (rgerhards), 2011-06-14 - bugfix: problems in failover action handling closes: http://bugzilla.adiscon.com/show_bug.cgi?id=270 closes: http://bugzilla.adiscon.com/show_bug.cgi?id=254 - bugfix: mutex was invalidly left unlocked during action processing At least one case where this can occur is during thread shutdown, which may be initiated by lower activity. In most cases, this is quite unlikely to happen. However, if it does, data structures may be corrupted which could lead to fatal failure and segfault. I detected this via a testbench test, not a user report. But I assume that some users may have had unreproducable aborts that were cause by this bug. - bugfix/improvement:$WorkDirectory now gracefully handles trailing slashes - bugfix: memory leak in imtcp & subsystems under some circumstances This leak is tied to error conditions which lead to incorrect cleanup of some data structures. [backport from v6.3] - bugfix: $ActionFileDefaultTemplate did not work closes: http://bugzilla.adiscon.com/show_bug.cgi?id=262 --------------------------------------------------------------------------- Version 6.1.8 [BETA] (rgerhards), 2011-05-20 - official new beta version (note that in a sense 6.1.7 was already beta, so we may release the first stable v6 earlier than usual) - new module mmsnmptrapd, a sample message modification module - import of minor bug fixes from v4 & v5 --------------------------------------------------------------------------- Version 6.1.7 [DEVEL] (rgerhards), 2011-04-15 - added log classification capabilities (via mmnormalize & tags) - speeded up tcp forwarding by reducing number of API calls this especially speeds up TLS processing - somewhat improved documentation index - bugfix: enhanced imudp config processing code disabled due to wrong merge (affected UDP realtime capabilities) - bugfix (kind of): memory leak with tcp reception epoll handler This was an extremely unlikely leak and, if it happened, quite small. Still it is better to handle this border case. - bugfix: IPv6-address could not be specified in omrelp this was due to improper parsing of ":" closes: http://bugzilla.adiscon.com/show_bug.cgi?id=250 - bugfix: do not open files with full privileges, if privs will be dropped This make the privilege drop code more bulletproof, but breaks Ubuntu's work-around for log files created by external programs with the wrong user and/or group. Note that it was long said that this "functionality" would break once we go for serious privilege drop code, so hopefully nobody still depends on it (and, if so, they lost...). - bugfix: pipes not opened in full priv mode when privs are to be dropped --------------------------------------------------------------------------- Version 6.1.6 [DEVEL] (rgerhards), 2011-03-14 - enhanced omhdfs to support batching mode. This permits to increase performance, as we now call the HDFS API with much larger message sizes and far more infrequently - improved testbench among others, life tests for ommysql (against a test database) have been added, valgrind-based testing enhanced, ... - bugfix: minor memory leak in omlibdbi (< 1k per instance and run) - bugfix: (regression) omhdfs did no longer compile - bugfix: omlibdbi did not use password from rsyslog.con closes: http://bugzilla.adiscon.com/show_bug.cgi?id=203 - systemd support somewhat improved (can now take over existing log sockt) - bugfix: discard action did not work under some circumstances fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=217 - bugfix: file descriptor leak in gnutls netstream driver fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=222 - fixed compile problem in imtemplate fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=235 --------------------------------------------------------------------------- Version 6.1.5 [DEVEL] (rgerhards), 2011-03-04 - improved testbench - enhanced imtcp to use a pool of worker threads to process incoming messages. This enables higher processing rates, especially in the TLS case (where more CPU is needed for the crypto functions) - added support for TLS (in anon mode) to tcpflood - improved TLS error reporting - improved TLS startup (Diffie-Hellman bits do not need to be generated, as we do not support full anon key exchange -- we always need certs) - bugfix: fixed a memory leak and potential abort condition this could happen if multiple rulesets were used and some output batches contained messages belonging to more than one ruleset. fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=226 fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=218 - bugfix: memory leak when $RepeatedMsgReduction on was used bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=225 - bugfix: potential abort condition when $RepeatedMsgReduction set to on as well as potentially in a number of other places where MsgDup() was used. This only happened when the imudp input module was used and it depended on name resolution not yet had taken place. In other words, this was a strange problem that could lead to hard to diagnose instability. So if you experience instability, chances are good that this fix will help. --------------------------------------------------------------------------- Version 6.1.4 [DEVEL] (rgerhards), 2011-02-18 - bugfix/omhdfs: directive $OMHDFSFileName rendered unusable due to a search and replace-induced bug ;) - bugfix: minor race condition in action.c - considered cosmetic This is considered cosmetic as multiple threads tried to write exactly the same value into the same memory location without sync. The method has been changed so this can no longer happen. - added pmsnare parser module (written by David Lang) - enhanced imfile to support non-cancel input termination - improved systemd socket activation thanks to Marius Tomaschewski - improved error reporting for $WorkDirectory non-existence and other detectable problems are now reported, and the work directory is NOT set in this case - bugfix: pmsnare caused abort under some conditions - bugfix: abort if imfile reads file line of more than 64KiB Thanks to Peter Eisentraut for reporting and analyzing this problem. bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=221 - bugfix: queue engine did not properly slow down inputs in FULL_DELAY mode when in disk-assisted mode. This especially affected imfile, which created unnecessarily queue files if a large set of input file data was to process. - bugfix: very long running actions could prevent shutdown under some circumstances. This has now been solved, at least for common situations. - bugfix: fixed compile problem due to empty structs this occurred only on some platforms/compilers. thanks to Dražen Kačar for the fix --------------------------------------------------------------------------- Version 6.1.3 [DEVEL] (rgerhards), 2011-02-01 - experimental support for mongodb added - added $IMUDPSchedulingPolicy and $IMUDPSchedulingPriority config settings - added $LocalHostName config directive - improved tcpsrv performance by enabling multiple-entry epoll so far, we always pulled a single event from the epoll interface. Now 128, what should result in performance improvement (less API calls) on busy systems. Most importantly affects imtcp. - imptcp now supports non-cancel termination mode, a plus in stability - imptcp speedup: multiple worker threads can now be used to read data - new directive $InputIMPTcpHelperThreads added - bugfix: fixed build problems on some platforms namely those that have 32bit atomic operations but not 64 bit ones - bugfix: local hostname was pulled too-early, so that some config directives (namely FQDN settings) did not have any effect - enhanced tcpflood to support multiple sender threads this is required for some high-throughput scenarios (and necessary to run some performance tests, because otherwise the sender is too slow). - added some new custom parsers (snare, aix, some Cisco "specialities") thanks to David Lang --------------------------------------------------------------------------- Version 6.1.2 [DEVEL] (rgerhards), 2010-12-16 - added experimental support for log normalization (via liblognorm) support for normalizing log messages has been added in the form of mmnormalize. The core engine (property replacer, filter engine) has been enhanced to support properties from normalized events. Note: this is EXPERIMENTAL code. It is currently know that there are issues if the functionality is used with - disk-based queues - asynchronous action queues You can not use the new functionality together with these features. This limitation will be removed in later releases. However, we preferred to release early, so that one can experiment with the new feature set and accepted the price that this means the full set of functionality is not yet available. If not used together with these features, log normalizing should be pretty stable. - enhanced testing tool tcpflood now supports sending via UDP and the capability to run multiple iterations and generate statistics data records - bugfix: potential abort when output modules with different parameter passing modes were used in configured output modules --------------------------------------------------------------------------- Version 6.1.1 [DEVEL] (rgerhards), 2010-11-30 - bugfix(important): problem in TLS handling could cause rsyslog to loop in a tight loop, effectively disabling functionality and bearing the risk of unresponsiveness of the whole system. Bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=194 - support for omhdfs officially added (import from 5.7.1) - merged imuxsock improvements from 5.7.1 (see there) - support for systemd officially added (import from 5.7.0) - bugfix: a couple of problems that imfile had on some platforms, namely Ubuntu (not their fault, but occurred there) - bugfix: imfile utilizes 32 bit to track offset. Most importantly, this problem can not experienced on Fedora 64 bit OS (which has 64 bit long's!) - a number of other bugfixes from older versions imported --------------------------------------------------------------------------- Version 6.1.0 [DEVEL] (rgerhards), 2010-08-12 *********************************** NOTE ********************************** The v6 versions of rsyslog feature a greatly redesigned config system which, among others, supports scoping. However, the initial version does not contain the whole new system. Rather it will evolve. So it is expected that interfaces, even new ones, break during the initial 6.x.y releases. *********************************** NOTE ********************************** - added $Begin, $End and $ScriptScoping config scope statements (at this time for actions only). - added imptcp, a simplified, Linux-specific and potentially fast syslog plain tcp input plugin (NOT supporting TLS!) [ported from v4] --------------------------------------------------------------------------- Version 5.10.2 [V5-STABLE], 201?-??-?? - bugfix: queue file size was not correctly processed this could lead to using one queue file per message for sizes >2GiB Thanks to Tomas Heinrich for the patch. - updated systemd files to match current systemd source - bugfix: spurios error messages from imuxsock about (non-error) EAGAIN Thanks to Marius Tomaschewski for the patch. - imklog: added $klogParseKernelTimestamp option When enabled, kernel message [timestamp] is converted for message time. Default is to use receive time as in 5.8.x and before, because the clock used to create the timestamp is not supposed to be as accurate as the monotonic clock (depends on hardware and kernel) resulting in differences between kernel and system messages which occurred at same time. Thanks to Marius Tomaschewski for the patch. - imklog: added $klogKeepKernelTimestamp option When enabled, the kernel [timestamp] remains at begin of each message, even it is used for the message time too. Thanks to Marius Tomaschewski for the patch. - bugfix: imklog mistakenly took kernel timestamp subseconds as nanoseconds ... actually, they are microseconds. So the fractional part of the timestamp was not properly formatted. Thanks to Marius Tomaschewski for the bug report and the patch idea. - imklog: added $klogKeepKernelTimestamp option When enabled, the kernel [timestamp] remains at begin of each message, even it is used for the message time too. Thanks to Marius Tomaschewski for the patch. - bugfix: imklog mistakenly took kernel timestamp subseconds as nanoseconds ... actually, they are microseconds. So the fractional part of the timestamp was not properly formatted. Thanks to Marius Tomaschewski for the bug report and the patch idea. - bugfix: invalid DST handling under Solaris Thanks to Scott Severtson for the patch. - bugfix: invalid decrement in pm5424 could lead to log truncation Thanks to Tomas Heinrich for the patch. - bugfix[kind of]: omudpspoof discarded messages >1472 bytes (MTU size) it now truncates these message, but ensures they are sent. Note that 7.3.5+ will switch to fragmented UDP messages instead (up to 64K) --------------------------------------------------------------------------- Version 5.10.1 [V5-STABLE], 2012-10-17 - bugfix: imuxsock and imklog truncated head of received message This happened only under some circumstances. Thanks to Marius Tomaschewski, Florian Piekert and Milan Bartos for their help in solving this issue. - enable DNS resolution in imrelp Thanks to Apollon Oikonomopoulos for the patch - bugfix: invalid property name in property-filter could cause abort if action chaining (& operator) was used http://bugzilla.adiscon.com/show_bug.cgi?id=355 Thanks to pilou@gmx.com for the bug report - bugfix: remove invalid socket option call from imuxsock Thanks to Cristian Ionescu-Idbohrn and Jonny Törnbom - bugfix: fixed wrong bufferlength for snprintf in tcpflood.c when using the -f (dynafiles) option. - fixed issues in build system (namely related to cust1 dummy plugin) --------------------------------------------------------------------------- Version 5.10.0 [V5-STABLE], 2012-08-23 NOTE: this is the new rsyslog v5-stable, incorporating all changes from the 5.9.x series. In addition to that, it contains the fixes and enhancements listed below in this entry. - bugfix: delayable source could block action queue, even if there was a disk queue associated with it. The root cause of this problem was that it makes no sense to delay messages once they arrive in the action queue - the "input" that is being held in that case is the main queue worker, what makes no sense. Thanks to Marcin for alerting us on this problem and providing instructions to reproduce it. - bugfix: disk queue was not persisted on shutdown, regression of fix to http://bugzilla.adiscon.com/show_bug.cgi?id=299 The new code also handles the case of shutdown of blocking light and full delayable sources somewhat smarter and permits, assuming sufficient timeouts, to persist message up to the max queue capacity. Also some nits in debug instrumentation have been fixed. - add small delay (50ms) after sending shutdown message There seem to be cases where the shutdown message is otherwise not processed, not even on an idle system. Thanks to Marcin for bringing this problem up. - support for resolving huge groups closes: http://bugzilla.adiscon.com/show_bug.cgi?id=310 Thanks to Alec Warner for the patch - bugfix: potential hang due to mutex deadlock closes: http://bugzilla.adiscon.com/show_bug.cgi?id=316 Thanks to Andreas Piesk for reporting&analyzing this bug as well as providing patches and other help in resolving it. - bugfix: property PROCID empty instead of proper nilvalue if not present If it is not present, it must have the nilvalue "-" as of RFC5424 closes: http://bugzilla.adiscon.com/show_bug.cgi?id=332 Thanks to John N for reporting this issue. - bugfix: "last message repeated n times" message was missing hostname Thanks to Zdenek Salvet for finding this bug and to Bodik for reporting - bugfix: multiple main queues with same queue file name was not detected This lead to queue file corruption. While the root cause is a config error, it is a bug that this important and hard to find config error was not detected by rsyslog. --------------------------------------------------------------------------- Version 5.9.7 [V5-BETA], 2012-05-10 - added capability to specify substrings for field extraction mode - bugfix: ommysql did not properly init/exit the mysql runtime library this could lead to segfaults. Triggering condition: multiple action instances using ommysql. Thanks to Tomas Heinrich for reporting this problem and providing an initial patch (which my solution is based on, I need to add more code to clean the mess up). - bugfix: rsyslog did not terminate when delayable inputs were blocked due to unavailable sources. Fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=299 Thanks to Marcin M for bringing up this problem and Andre Lorbach for helping to reproduce and fix it. - bugfix/tcpflood: sending small test files did not work correctly --------------------------------------------------------------------------- Version 5.9.6 [V5-BETA], 2012-04-12 - added configuration directives to customize queue light delay marks - permit size modifiers (k,m,g,...) in integer config parameters Thanks to Jo Rhett for the suggestion. - bugfix: hostname was not requeried on HUP Thanks to Per Jessen for reporting this bug and Marius Tomaschewski for his help in testing the fix. - bugfix: imklog invalidly computed facility and severity closes: http://bugzilla.adiscon.com/show_bug.cgi?id=313 - bugfix: imptcp input name could not be set config directive was accepted, but had no effect - added configuration directive to disable octet-counted framing for imtcp, directive is $InputTCPServerSupportOctetCountedFraming for imptcp, directive is $InputPTCPServerSupportOctetCountedFraming - added capability to use a local interface IP address as fromhost-ip for locally originating messages. New directive $LocalHostIPIF - added configuration directives to customize queue light delay marks $MainMsgQueueLightDelayMark, $ActionQueueLightDelayMark; both specify number of messages starting at which a delay happens. --------------------------------------------------------------------------- Version 5.9.5 [V5-DEVEL], 2012-01-27 - improved impstats subsystem, added many new counters - enhanced module loader to not rely on PATH_MAX - refactored imklog linux driver, now combined with BSD driver The Linux driver no longer supports outdated kernel symbol resolution, which was disabled by default for very long. Also overall cleanup, resulting in much smaller code. Linux and BSD are now covered by a single small driver. - $IMUXSockRateLimitInterval DEFAULT CHANGED, was 5, now 0 The new default turns off rate limiting. This was chosen as people experienced problems with rate-limiting activated by default. Now it needs an explicit opt-in by setting this parameter. Thanks to Chris Gaffney for suggesting to make it opt-in; thanks to many unnamed others who already had complained at the time Chris made the suggestion ;-) --------------------------------------------------------------------------- Version 5.9.4 [V5-DEVEL], 2011-11-29 - imuxsock: added capability to "annotate" messages with "trusted information", which contains some properties obtained from the system and as such sure to not be faked. This is inspired by the similar idea introduced in systemd. - removed dependency on gcrypt for recently-enough GnuTLS see: http://bugzilla.adiscon.com/show_bug.cgi?id=289 - bugfix: imuxsock did no longer ignore message-provided timestamp, if so configured (the *default*). Lead to no longer sub-second timestamps. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=281 - bugfix: omfile returns fatal error code for things that go really wrong previously, RS_RET_RESUME was returned, which lead to a loop inside the rule engine as omfile could not really recover. - bugfix: rsyslogd -v always said 64 atomics were not present thanks to mono_matsuko for the patch --------------------------------------------------------------------------- Version 5.9.3 [V5-DEVEL], 2011-09-01 - bugfix/security: off-by-two bug in legacy syslog parser, CVE-2011-3200 - bugfix: mark message processing did not work correctly - added capability to emit config error location info for warnings otherwise, omusrmsg's warning about new config format was not accompanied by problem location. - bugfix: potential misaddressing in property replacer - bugfix: MSGID corruption in RFC5424 parser under some circumstances closes: http://bugzilla.adiscon.com/show_bug.cgi?id=275 - bugfix: The NUL-Byte for the syslogtag was not copied in MsgDup (msg.c) --------------------------------------------------------------------------- Version 5.9.2 [V5-DEVEL] (rgerhards), 2011-07-11 - systemd support: set stdout/stderr to null - thx to Lennart for the patch - added support for the ":omusrmsg:" syntax in configuring user messages - added support for the ":omfile:" syntax for actions --------------------------------------------------------------------------- Version 5.9.1 [V5-DEVEL] (rgerhards), 2011-06-30 - added support for obtaining timestamp for kernel message from message If the kernel time-stamps messages, time is now take from that timestamp instead of the system time when the message was read. This provides much better accuracy. Thanks to Lennart Poettering for suggesting this feature and his help during implementation. - added support for obtaining timestamp from system for imuxsock This permits to read the time a message was submitted to the system log socket. Most importantly, this is provided in microsecond resolution. So we are able to obtain high precision timestampis even for messages that were - as is usual - not formatted with them. This also simplifies things in regard to local time calculation in chroot environments. Many thanks to Lennart Poettering for suggesting this feature, providing some guidance on implementing it and coordinating getting the necessary support into the Linux kernel. - bugfix: timestamp was incorrectly calculated for timezones with minute offset closes: http://bugzilla.adiscon.com/show_bug.cgi?id=271 - bugfix: problems in failover action handling closes: http://bugzilla.adiscon.com/show_bug.cgi?id=270 closes: http://bugzilla.adiscon.com/show_bug.cgi?id=254 - bugfix: mutex was invalidly left unlocked during action processing At least one case where this can occur is during thread shutdown, which may be initiated by lower activity. In most cases, this is quite unlikely to happen. However, if it does, data structures may be corrupted which could lead to fatal failure and segfault. I detected this via a testbench test, not a user report. But I assume that some users may have had unreproducable aborts that were cause by this bug. - bugfix: memory leak in imtcp & subsystems under some circumstances This leak is tied to error conditions which lead to incorrect cleanup of some data structures. [backport from v6] - bugfix/improvement:$WorkDirectory now gracefully handles trailing slashes --------------------------------------------------------------------------- Version 5.9.0 [V5-DEVEL] (rgerhards), 2011-06-08 - imfile: added $InputFileMaxLinesAtOnce directive - enhanced imfile to support input batching - added capability for imtcp and imptcp to activate keep-alive packets at the socket layer. This has not been added to imttcp, as the latter is only an experimental module, and one which did not prove to be useful. reference: http://kb.monitorware.com/post20791.html - added support to control KEEPALIVE settings in imptcp this has not yet been added to imtcp, but could be done on request. - $ActionName is now also used for naming of queues in impstats as well as in the debug output - bugfix: do not open files with full privileges, if privs will be dropped This make the privilege drop code more bulletproof, but breaks Ubuntu's work-around for log files created by external programs with the wrong user and/or group. Note that it was long said that this "functionality" would break once we go for serious privilege drop code, so hopefully nobody still depends on it (and, if so, they lost...). - bugfix: pipes not opened in full priv mode when privs are to be dropped - this begins a new devel branch for v5 - better handling of queue i/o errors in disk queues. This is kind of a bugfix, but a very intrusive one, this it goes into the devel version first. Right now, "file not found" is handled and leads to the new emergency mode, in which disk action is stopped and the queue run in direct mode. An error message is emited if this happens. - added support for user-level PRI provided via systemd - added new config directive $InputTCPFlowControl to select if tcp received messages shall be flagged as light delayable or not. - enhanced omhdfs to support batching mode. This permits to increase performance, as we now call the HDFS API with much larger message sizes and far more infrequently - bugfix: failover did not work correctly if repeated msg reduction was on affected directive was: $ActionExecOnlyWhenPreviousIsSuspended on closes: http://bugzilla.adiscon.com/show_bug.cgi?id=236 --------------------------------------------------------------------------- Version 5.8.13 [V5-stable] 2012-08-22 - bugfix: DA queue could cause abort - bugfix: "last message repeated n times" message was missing hostname Thanks to Zdenek Salvet for finding this bug and to Bodik for reporting - bugfix "$PreserveFQDN on" was not honored in some modules Thanks to bodik for reporting this bug. - bugfix: randomized IP option header in omudpspoof caused problems closes: http://bugzilla.adiscon.com/show_bug.cgi?id=327 Thanks to Rick Brown for helping to test out the patch. - bugfix: potential abort if output plugin logged message during shutdown note that none of the rsyslog-provided plugins does this Thanks to bodik and Rohit Prasad for alerting us on this bug and analyzing it. fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=347 - bugfix: multiple main queues with same queue file name was not detected This lead to queue file corruption. While the root cause is a config error, it is a bug that this important and hard to find config error was not detected by rsyslog. --------------------------------------------------------------------------- Version 5.8.12 [V5-stable] 2012-06-06 - add small delay (50ms) after sending shutdown message There seem to be cases where the shutdown message is otherwise not processed, not even on an idle system. Thanks to Marcin for bringing this problem up. - support for resolving huge groups closes: http://bugzilla.adiscon.com/show_bug.cgi?id=310 Thanks to Alec Warner for the patch - bugfix: delayable source could block action queue, even if there was a disk queue associated with it. The root cause of this problem was that it makes no sense to delay messages once they arrive in the action queue - the "input" that is being held in that case is the main queue worker, what makes no sense. Thanks to Marcin for alerting us on this problem and providing instructions to reproduce it. - bugfix: disk queue was not persisted on shutdown, regression of fix to http://bugzilla.adiscon.com/show_bug.cgi?id=299 The new code also handles the case of shutdown of blocking light and full delayable sources somewhat smarter and permits, assuming sufficient timeouts, to persist message up to the max queue capacity. Also some nits in debug instrumentation have been fixed. - bugfix/omudpspoof: problems, including abort, happened when run on multiple threads. Root cause is that libnet is not thread-safe. omudpspoof now guards libnet calls with their own mutex. - bugfix: if debug message could end up in log file when forking if rsyslog was set to auto-background (thus fork, the default) and debug mode to stdout was enabled, debug messages ended up in the first log file opened. Currently, stdout logging is completely disabled in forking mode (but writing to the debug log file is still possible). This is a change in behavior, which is under review. If it causes problems to you, please let us know. Thanks to Tomas Heinrich for the patch. - bugfix/tcpflood: sending small test files did not work correctly - bugfix: potential hang due to mutex deadlock closes: http://bugzilla.adiscon.com/show_bug.cgi?id=316 Thanks to Andreas Piesk for reporting&analyzing this bug as well as providing patches and other help in resolving it. - bugfix: property PROCID empty instead of proper nilvalue if not present If it is not present, it must have the nilvalue "-" as of RFC5424 closes: http://bugzilla.adiscon.com/show_bug.cgi?id=332 Thanks to John N for reporting this issue. --------------------------------------------------------------------------- Version 5.8.11 [V5-stable] 2012-05-03 - bugfix: ommysql did not properly init/exit the mysql runtime library this could lead to segfaults. Triggering condition: multiple action instances using ommysql. Thanks to Tomas Heinrich for reporting this problem and providing an initial patch (which my solution is based on, I need to add more code to clean the mess up). - bugfix: rsyslog did not terminate when delayable inputs were blocked due to unavailable sources. Fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=299 Thanks to Marcin M for bringing up this problem and Andre Lorbach for helping to reproduce and fix it. - bugfix: active input in "light delay state" could block rsyslog termination, at least for prolonged period of time - bugfix: imptcp input name could not be set config directive was accepted, but had no effect - bugfix: assigned ruleset was lost when using disk queues This looked quite hard to diagnose for disk-assisted queues, as the pure memory part worked well, but ruleset info was lost for messages stored inside the disk queue. - bugfix: hostname was not requeried on HUP Thanks to Per Jessen for reporting this bug and Marius Tomaschewski for his help in testing the fix. - bugfix: inside queue.c, some thread cancel states were not correctly reset. While this is a bug, we assume it did have no practical effect because the reset as it was done was set to the state the code actually had at this point. But better fix this... --------------------------------------------------------------------------- Version 5.8.10 [V5-stable] 2012-04-05 - bugfix: segfault on startup if $actionqueuefilename was missing for disk queue config Thanks to Tomas Heinrich for the patch. - bugfix: segfault if disk-queue was started up with old queue file Thanks to Tomas Heinrich for the patch. - bugfix: memory leak in array passing output module mode --------------------------------------------------------------------------- Version 5.8.9 [V5-stable] 2012-03-15 - added tool to recover disk queue if .qi file is missing (recover_qi.pl) Thanks to Kaiwang Chen for contributing this tool - bugfix: stopped DA queue was never processed after a restart due to a regression from statistics module - added better doc for statsobj interface Thanks to Kaiwang Chen for his suggestions and analysis in regard to the stats subsystem. --------------------------------------------------------------------------- Version 5.8.8 [V5-stable] 2012-03-05 - added capability to use a local interface IP address as fromhost-ip for imuxsock imklog new config directives: $IMUXSockLocalIPIF, $klogLocalIPIF - added configuration directives to customize queue light delay marks $MainMsgQueueLightDelayMark, $ActionQueueLightDelayMark; both specify number of messages starting at which a delay happens. - bugfix: omprog made rsyslog abort on startup if not binary to execute was configured - bugfix: imklog invalidly computed facility and severity closes: http://bugzilla.adiscon.com/show_bug.cgi?id=313 --------------------------------------------------------------------------- Version 5.8.7 [V5-stable] 2012-01-17 - bugfix: instabilities when using RFC5424 header fields Thanks to Kaiwang Chen for the patch - bugfix: imuxsock did truncate part of received message if it did not contain a proper date. The truncation occurred because we removed that part of the messages that was expected to be the date. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=295 - bugfix: potential abort after reading invalid X.509 certificate closes: http://bugzilla.adiscon.com/show_bug.cgi?id=290 Thanks to Tomas Heinrich for the patch - bugfix: stats counter were not properly initialized on creation - FQDN hostname for multihomed host was not always set to the correct name if multiple aliases existed. Thanks to Tomas Heinreich for the patch. - re-licensed larger parts of the codebase under the Apache license 2.0 --------------------------------------------------------------------------- Version 5.8.6 [V5-stable] 2011-10-21 - bugfix: missing whitespace after property-based filter was not detected - bugfix: $OMFileFlushInterval period was doubled - now using correct value - bugfix: ActionQueue could malfunction due to index error Thanks to Vlad Grigorescu for the patch - bugfix: $ActionExecOnlyOnce interval did not work properly Thanks to Tomas Heinrich for the patch - bugfix: race condition when extracting program name, APPNAME, structured data and PROCID (RFC5424 fields) could lead to invalid characters e.g. in dynamic file names or during forwarding (general malfunction of these fields in templates, mostly under heavy load) - bugfix: imuxsock did no longer ignore message-provided timestamp, if so configured (the *default*). Lead to no longer sub-second timestamps. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=281 - bugfix: omfile returns fatal error code for things that go really wrong previously, RS_RET_RESUME was returned, which lead to a loop inside the rule engine as omfile could not really recover. - bugfix: imfile did invalid system call under some circumstances when a file that was to be monitored did not exist BUT the state file actually existed. Mostly a cosmetic issue. Root cause was incomplete error checking in stream.c; so patch may affect other code areas. - bugfix: rsyslogd -v always said 64 atomics were not present thanks to mono_matsuko for the patch --------------------------------------------------------------------------- Version 5.8.5 [V5-stable] (rgerhards/al), 2011-09-01 - bugfix/security: off-by-two bug in legacy syslog parser, CVE-2011-3200 - bugfix: mark message processing did not work correctly - bugfix: potential hang condition during tag emulation - bugfix: too-early string termination during tag emulation - bugfix: The NUL-Byte for the syslogtag was not copied in MsgDup (msg.c) - bugfix: fixed incorrect state handling for Discard Action (transactions) Note: This caused all messages in a batch to be set to COMMITTED, even if they were discarded. --------------------------------------------------------------------------- Version 5.8.4 [V5-stable] (al), 2011-08-10 - bugfix: potential misaddressing in property replacer - bugfix: memcpy overflow can occur in allowed sender checking if a name is resolved to IPv4-mapped-on-IPv6 address Found by Ismail Dönmez at suse - bugfix: potential misaddressing in property replacer - bugfix: MSGID corruption in RFC5424 parser under some circumstances closes: http://bugzilla.adiscon.com/show_bug.cgi?id=275 --------------------------------------------------------------------------- Version 5.8.3 [V5-stable] (rgerhards), 2011-07-11 - systemd support: set stdout/stderr to null - thx to Lennart for the patch - added support for the ":omusrmsg:" syntax in configuring user messages - added support for the ":omfile:" syntax for actions Note: previous outchannel syntax will generate a warning message. This may be surprising to some users, but it is quite urgent to alert them of the new syntax as v6 can no longer support the previous one. --------------------------------------------------------------------------- Version 5.8.2 [V5-stable] (rgerhards), 2011-06-21 - bugfix: problems in failover action handling closes: http://bugzilla.adiscon.com/show_bug.cgi?id=270 closes: http://bugzilla.adiscon.com/show_bug.cgi?id=254 - bugfix: mutex was invalidly left unlocked during action processing At least one case where this can occur is during thread shutdown, which may be initiated by lower activity. In most cases, this is quite unlikely to happen. However, if it does, data structures may be corrupted which could lead to fatal failure and segfault. I detected this via a testbench test, not a user report. But I assume that some users may have had unreproducable aborts that were cause by this bug. - bugfix: memory leak in imtcp & subsystems under some circumstances This leak is tied to error conditions which lead to incorrect cleanup of some data structures. [backport from v6] - bugfix/improvement:$WorkDirectory now gracefully handles trailing slashes --------------------------------------------------------------------------- Version 5.8.1 [V5-stable] (rgerhards), 2011-05-19 - bugfix: invalid processing in QUEUE_FULL condition If the the multi-submit interface was used and a QUEUE_FULL condition occurred, the failed message was properly destructed. However, the rest of the input batch, if it existed, was not processed. So this lead to potential loss of messages and a memory leak. The potential loss of messages was IMHO minor, because they would have been dropped in most cases due to the queue remaining full, but very few lucky ones from the batch may have made it. Anyhow, this has now been changed so that the rest of the batch is properly tried to be enqueued and, if not possible, destructed. - new module mmsnmptrapd, a sample message modification module This can be useful to reformat snmptrapd messages and also serves as a sample for how to write message modification modules using the output module interface. Note that we introduced this new functionality directly into the stable release, as it does not modify the core and as such cannot have any side-effects if it is not used (and thus the risk is solely on users requiring that functionality). - bugfix: rate-limiting inside imuxsock did not work 100% correct reason was that a global config variable was invalidly accessed where a listener variable should have been used. Also performance-improved the case when rate limiting is turned off (this is a very unintrusive change, thus done directly to the stable version). - bugfix: $myhostname not available in RainerScript (and no error message) closes: http://bugzilla.adiscon.com/show_bug.cgi?id=233 - bugfix: memory and file descriptor leak in stream processing Leaks could occur under some circumstances if the file stream handler errored out during the open call. Among others, this could cause very big memory leaks if there were a problem with unreadable disk queue files. In regard to the memory leak, this closes: http://bugzilla.adiscon.com/show_bug.cgi?id=256 - bugfix: doc for impstats had wrong config statements also, config statements were named a bit inconsistent, resolved that problem by introducing an alias and only documenting the consistent statements Thanks to Marcin for bringing up this problem. - bugfix: IPv6-address could not be specified in omrelp this was due to improper parsing of ":" closes: http://bugzilla.adiscon.com/show_bug.cgi?id=250 - bugfix: TCP connection invalidly aborted when messages needed to be discarded (due to QUEUE_FULL or similar problem) - bugfix: $LocalHostName was not honored under all circumstances closes: http://bugzilla.adiscon.com/show_bug.cgi?id=258 - bugfix(minor): improper template function call in syslogd.c --------------------------------------------------------------------------- Version 5.8.0 [V5-stable] (rgerhards), 2011-04-12 This is the new v5-stable branch, importing all feature from the 5.7.x versions. To see what has changed in regard to the previous v5-stable, check the Changelog for 5.7.x below. - bugfix: race condition in deferred name resolution closes: http://bugzilla.adiscon.com/show_bug.cgi?id=238 Special thanks to Marcin for his persistence in helping to solve this bug. - bugfix: DA queue was never shutdown once it was started closes: http://bugzilla.adiscon.com/show_bug.cgi?id=241 --------------------------------------------------------------------------- Version 5.7.10 [V5-BETA] (rgerhards), 2011-03-29 - bugfix: ompgsql did not work properly with ANSI SQL strings closes: http://bugzilla.adiscon.com/show_bug.cgi?id=229 - bugfix: rsyslog did not build with --disable-regexp configure option closes: http://bugzilla.adiscon.com/show_bug.cgi?id=243 - bugfix: PRI was invalid on Solaris for message from local log socket - enhance: added $BOM system property to ease writing byte order masks - bugfix: RFC5424 parser confused by empty structured data closes: http://bugzilla.adiscon.com/show_bug.cgi?id=237 - bugfix: error return from strgen caused abort, now causes action to be ignored (just like a failed filter) - new sample plugin for a strgen to generate sql statement consumable by a database plugin - bugfix: strgen could not be used together with database outputs because the sql/stdsql option could not be specified. This has been solved by permitting the strgen to include the opton inside its name. closes: http://bugzilla.adiscon.com/show_bug.cgi?id=195 --------------------------------------------------------------------------- Version 5.7.9 [V5-BETA] (rgerhards), 2011-03-16 - improved testbench among others, life tests for ommysql (against a test database) have been added, valgrind-based testing enhanced, ... - enhance: fallback *at runtime* to epoll_create if epoll_create1 is not available. Thanks to Michael Biebl for analysis and patch! - bugfix: failover did not work correctly if repeated msg reduction was on closes: http://bugzilla.adiscon.com/show_bug.cgi?id=236 affected directive was: $ActionExecOnlyWhenPreviousIsSuspended on - bugfix: minor memory leak in omlibdbi (< 1k per instance and run) - bugfix: (regression) omhdfs did no longer compile - bugfix: omlibdbi did not use password from rsyslog.conf closes: http://bugzilla.adiscon.com/show_bug.cgi?id=203 --------------------------------------------------------------------------- Version 5.7.8 [V5-BETA] (rgerhards), 2011-03-09 - systemd support somewhat improved (can now take over existing log sockt) - bugfix: discard action did not work under some circumstances fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=217 - bugfix: file descriptor leak in gnutls netstream driver fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=222 --------------------------------------------------------------------------- Version 5.7.7 [V5-BETA] (rgerhards), 2011-03-02 - bugfix: potential abort condition when $RepeatedMsgReduction set to on as well as potentially in a number of other places where MsgDup() was used. This only happened when the imudp input module was used and it depended on name resolution not yet had taken place. In other words, this was a strange problem that could lead to hard to diagnose instability. So if you experience instability, chances are good that this fix will help. --------------------------------------------------------------------------- Version 5.7.6 [V5-BETA] (rgerhards), 2011-02-25 - bugfix: fixed a memory leak and potential abort condition this could happen if multiple rulesets were used and some output batches contained messages belonging to more than one ruleset. fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=226 fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=218 - bugfix: memory leak when $RepeatedMsgReduction on was used bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=225 --------------------------------------------------------------------------- Version 5.7.5 [V5-BETA] (rgerhards), 2011-02-23 - enhance: imfile did not yet support multiple rulesets, now added we do this directly in the beta because a) it does not affect existing functionality and b) one may argue that this missing functionality is close to a bug. - improved testbench, added tests for imuxsock - bugfix: imuxsock did no longer sanitize received messages This was a regression from the imuxsock partial rewrite. Happened because the message is no longer run through the standard parsers. bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=224 - bugfix: minor race condition in action.c - considered cosmetic This is considered cosmetic as multiple threads tried to write exactly the same value into the same memory location without sync. The method has been changed so this can no longer happen. --------------------------------------------------------------------------- Version 5.7.4 [V5-BETA] (rgerhards), 2011-02-17 - added pmsnare parser module (written by David Lang) - enhanced imfile to support non-cancel input termination - improved systemd socket activation thanks to Marius Tomaschewski - improved error reporting for $WorkDirectory non-existence and other detectable problems are now reported, and the work directory is NOT set in this case - bugfix: pmsnare caused abort under some conditions - bugfix: abort if imfile reads file line of more than 64KiB Thanks to Peter Eisentraut for reporting and analyzing this problem. bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=221 - bugfix: queue engine did not properly slow down inputs in FULL_DELAY mode when in disk-assisted mode. This especially affected imfile, which created unnecessarily queue files if a large set of input file data was to process. - bugfix: very long running actions could prevent shutdown under some circumstances. This has now been solved, at least for common situations. - bugfix: fixed compile problem due to empty structs this occurred only on some platforms/compilers. thanks to Dražen Kačar for the fix --------------------------------------------------------------------------- Version 5.7.3 [V5-BETA] (rgerhards), 2011-02-07 - added support for processing multi-line messages in imfile - added $IMUDPSchedulingPolicy and $IMUDPSchedulingPriority config settings - added $LocalHostName config directive - bugfix: fixed build problems on some platforms namely those that have 32bit atomic operations but not 64 bit ones - bugfix: local hostname was pulled too-early, so that some config directives (namely FQDN settings) did not have any effect - bugfix: imfile did duplicate messages under some circumstances - added $OMMySQLConfigFile config directive - added $OMMySQLConfigSection config directive --------------------------------------------------------------------------- Version 5.7.2 [V5-DEVEL] (rgerhards), 2010-11-26 - bugfix(important): problem in TLS handling could cause rsyslog to loop in a tight loop, effectively disabling functionality and bearing the risk of unresponsiveness of the whole system. Bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=194 - bugfix: imfile state file was not written when relative file name for it was specified - bugfix: compile failed on systems without epoll_create1() Thanks to David Hill for providing a fix. - bugfix: atomic increment for msg object may not work correct on all platforms. Thanks to Chris Metcalf for the patch - bugfix: replacements for atomic operations for non-int sized types had problems. At least one instance of that problem could potentially lead to abort (inside omfile). --------------------------------------------------------------------------- Version 5.7.1 [V5-DEVEL] (rgerhards), 2010-10-05 - support for Hadoop's HDFS added (via omhdfs) - imuxsock now optionally use SCM_CREDENTIALS to pull the pid from the log socket itself (thanks to Lennart Poettering for the suggesting this feature) - imuxsock now optionally uses per-process input rate limiting, guarding the user against processes spamming the system log (thanks to Lennart Poettering for suggesting this feature) - added new config statements * $InputUnixListenSocketUsePIDFromSystem * $SystemLogUsePIDFromSystem * $SystemLogRateLimitInterval * $SystemLogRateLimitBurst * $SystemLogRateLimitSeverity * $IMUxSockRateLimitInterval * $IMUxSockRateLimitBurst * $IMUxSockRateLimitSeverity - imuxsock now supports up to 50 different sockets for input - some code cleanup in imuxsock (consider this a release a major modification, especially if problems show up) - bugfix: /dev/log was unlinked even when passed in from systemd in which case it should be preserved as systemd owns it --------------------------------------------------------------------------- Version 5.7.0 [V5-DEVEL] (rgerhards), 2010-09-16 - added module impstat to emit periodic statistics on rsyslog counters - support for systemd officially added * acquire /dev/log socket optionally from systemd thanks to Lennart Poettering for this patch * sd-systemd API added as part of rsyslog runtime library --------------------------------------------------------------------------- Version 5.6.5 [V5-STABLE] (rgerhards), 2011-03-22 - bugfix: failover did not work correctly if repeated msg reduction was on affected directive was: $ActionExecOnlyWhenPreviousIsSuspended on closes: http://bugzilla.adiscon.com/show_bug.cgi?id=236 - bugfix: omlibdbi did not use password from rsyslog.con closes: http://bugzilla.adiscon.com/show_bug.cgi?id=203 - bugfix(kind of): tell users that config graph can currently not be generated closes: http://bugzilla.adiscon.com/show_bug.cgi?id=232 - bugfix: discard action did not work under some circumstances fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=217 (backport from 5.7.8) --------------------------------------------------------------------------- Version 5.6.4 [V5-STABLE] (rgerhards), 2011-03-03 - bugfix: potential abort condition when $RepeatedMsgReduction set to on as well as potentially in a number of other places where MsgDup() was used. This only happened when the imudp input module was used and it depended on name resolution not yet had taken place. In other words, this was a strange problem that could lead to hard to diagnose instability. So if you experience instability, chances are good that this fix will help. - bugfix: fixed a memory leak and potential abort condition this could happen if multiple rulesets were used and some output batches contained messages belonging to more than one ruleset. fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=226 fixes: http://bugzilla.adiscon.com/show_bug.cgi?id=218 - bugfix: memory leak when $RepeatedMsgReduction on was used bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=225 --------------------------------------------------------------------------- Version 5.6.3 [V5-STABLE] (rgerhards), 2011-01-26 - bugfix: action processor released memory too early, resulting in potential issue in retry cases (but very unlikely due to another bug, which I also fixed -- only after the fix this problem here became actually visible). - bugfix: batch processing flagged invalid message as "bad" under some circumstances - bugfix: uninitialized variable could cause issues under extreme conditions plus some minor nits. This was found after a clang static code analyzer analysis (great tool, and special thanks to Marcin for telling me about it!) - bugfix: batches which had actions in error were not properly retried in all cases - bugfix: imfile did duplicate messages under some circumstances - bugfix: testbench was not activated if no Java was present on system ... what actually was a left-over. Java is no longer required. --------------------------------------------------------------------------- Version 5.6.2 [V5-STABLE] (rgerhards), 2010-11-30 - bugfix: compile failed on systems without epoll_create1() Thanks to David Hill for providing a fix. - bugfix: atomic increment for msg object may not work correct on all platforms. Thanks to Chris Metcalf for the patch - bugfix: replacements for atomic operations for non-int sized types had problems. At least one instance of that problem could potentially lead to abort (inside omfile). - added the $InputFilePersistStateInterval config directive to imfile - changed imfile so that the state file is never deleted (makes imfile more robust in regard to fatal failures) - bugfix: a slightly more informative error message when a TCP connections is aborted --------------------------------------------------------------------------- Version 5.6.1 [V5-STABLE] (rgerhards), 2010-11-24 - bugfix(important): problem in TLS handling could cause rsyslog to loop in a tight loop, effectively disabling functionality and bearing the risk of unresponsiveness of the whole system. Bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=194 - permitted imptcp to work on systems which support epoll(), but not epoll_create(). Bug: http://bugzilla.adiscon.com/show_bug.cgi?id=204 Thanks to Nicholas Brink for reporting this problem. - bugfix: testbench failed if imptcp was not enabled - bugfix: segfault when an *empty* template was used Bug: http://bugzilla.adiscon.com/show_bug.cgi?id=206 Thanks to David Hill for alerting us. - bugfix: compile failed with --enable-unlimited-select thanks varmojfekoj for the patch --------------------------------------------------------------------------- Version 5.6.0 [V5-STABLE] (rgerhards), 2010-10-19 This release brings all changes and enhancements of the 5.5.x series to the v5-stable branch. - bugfix: a couple of problems that imfile had on some platforms, namely Ubuntu (not their fault, but occurred there) - bugfix: imfile utilizes 32 bit to track offset. Most importantly, this problem can not experienced on Fedora 64 bit OS (which has 64 bit long's!) --------------------------------------------------------------------------- Version 5.5.7 [V5-BETA] (rgerhards), 2010-08-09 - changed omudpspoof default spoof address to simplify typical use case thanks to David Lang for suggesting this - doc bugfix: pmlastmsg doc samples had errors - bugfix[minor]: pmrfc3164sd had invalid name (resided in rsyslog name space, what should not be the case for a contributed module) - added omuxsock, which permits to write message to local Unix sockets this is the counterpart to imuxsock, enabling fast local forwarding --------------------------------------------------------------------------- Version 5.5.6 [DEVEL] (rgerhards), 2010-07-21 - added parser modules * pmlastmsg, which supports the notoriously malformed "last message repeated n times" messages from some syslogd's (namely sysklogd) * pmrfc3164sd (contributed), supports RFC5424 structured data in RFC3164 messages [untested] - added new module type "string generator", used to speed up output processing. Expected speedup for (typical) rsyslog processing is roughly 5 to 6 percent compared to using string-based templates. They may also be used to do more complex formatting with custom C code, what provided greater flexibility and probably far higher speed, for example if using multiple regular expressions within a template. - added 4 string generators for * RSYSLOG_FileFormat * RSYSLOG_TraditionalFileFormat * RSYSLOG_ForwardFormat * RSYSLOG_TraditionalForwardFormat - bugfix: mutexes used to simulate atomic instructions were not destructed - bugfix: regression caused more locking action in msg.c than necessary - bugfix: "$ActionExecOnlyWhenPreviousIsSuspended on" was broken - bugfix: segfault on HUP when "HUPIsRestart" was set to "on" thanks varmojfekoj for the patch - bugfix: default for $OMFileFlushOnTXEnd was wrong ("off"). This, in default mode, caused buffered writing to be used, what means that it looked like no output were written or partial lines. Thanks to Michael Biebl for pointing out this bug. - bugfix: programname filter in ! configuration can not be reset Thanks to Kiss Gabor for the patch. --------------------------------------------------------------------------- Version 5.5.5 [DEVEL] (rgerhards), 2010-05-20 - added new cancel-reduced action thread termination method We now manage to cancel threads that block inside a retry loop to terminate without the need to cancel the thread. Avoiding cancellation helps keep the system complexity minimal and thus provides for better stability. This also solves some issues with improper shutdown when inside an action retry loop. --------------------------------------------------------------------------- Version 5.5.4 [DEVEL] (rgerhards), 2010-05-03 - This version offers full support for Solaris on Intel and Sparc - bugfix: problems with atomic operations emulation replaced atomic operation emulation with new code. The previous code seemed to have some issue and also limited concurrency severely. The whole atomic operation emulation has been rewritten. - bugfix: netstream ptcp support class was not correctly build on systems without epoll() support - bugfix: segfault on Solaris/Sparc --------------------------------------------------------------------------- Version 5.5.3 [DEVEL] (rgerhards), 2010-04-09 - added basic but functional support for Solaris - imported many bugfixes from 3.6.2/4.6.1 (see ChangeLog below!) - added new property replacer option "date-rfc3164-buggyday" primarily to ease migration from syslog-ng. See property replacer doc for details. - added capability to turn off standard LF delimiter in TCP server via new directive "$InputTCPServerDisableLFDelimiter on" - bugfix: failed to compile on systems without epoll support - bugfix: comment char ('#') in literal terminated script parsing and thus could not be used. but tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=119 [merged in from v3.22.2] - imported patches from 4.6.0: * improved testbench to contain samples for totally malformed messages which miss parts of the message content * bugfix: some malformed messages could lead to a missing LF inside files or some other missing parts of the template content. * bugfix: if a message ended immediately with a hostname, the hostname was mistakenly interpreted as TAG, and localhost be used as hostname --------------------------------------------------------------------------- Version 5.5.2 [DEVEL] (rgerhards), 2010-02-05 - applied patches that make rsyslog compile under Apple OS X. Thanks to trey for providing these. - replaced data type "bool" by "sbool" because this created some portability issues. - added $Escape8BitCharactersOnReceive directive Thanks to David Lang for suggesting it. - worked around an issue where omfile failed to compile on 32 bit platforms under some circumstances (this smells like a gcc problem, but a simple solution was available). Thanks to Kenneth Marshall for some advice. - extended testbench --------------------------------------------------------------------------- Version 5.5.1 [DEVEL] (rgerhards), 2009-11-27 - introduced the ability for netstream drivers to utilize an epoll interface This offers increased performance and removes the select() FDSET size limit from imtcp. Note that we fall back to select() if there is no epoll netstream drivers. So far, an epoll driver has only been implemented for plain tcp syslog, the rest will follow once the code proves well in practice AND there is demand. - re-implemented $EscapeControlCharacterTab config directive Based on Jonathan Bond-Caron's patch for v4. This now also includes some automated tests. - bugfix: enabling GSSServer crashes rsyslog startup Thanks to Tomas Kubina for the patch [imgssapi] - bugfix (kind of): check if TCP connection is still alive if using TLS Thanks to Jonathan Bond-Caron for the patch. --------------------------------------------------------------------------- Version 5.5.0 [DEVEL] (rgerhards), 2009-11-18 - moved DNS resolution code out of imudp and into the backend processing Most importantly, DNS resolution now never happens if the resolved name is not required. Note that this applies to imudp - for the other inputs, DNS resolution almost comes for free, so we do not do it there. However, the new method has been implemented in a generic way and as such may also be used by other modules in the future. - added option to use unlimited-size select() calls Thanks to varmojfekoj for the patch This is not done in imudp, as it natively supports epoll(). - doc: improved description of what loadable modules can do --------------------------------------------------------------------------- Version 5.4.2 [v5-stable] (rgerhards), 2010-03-?? - bugfix(kind of): output plugin retry behavior could cause engine to loop The rsyslog engine did not guard itself against output modules that do not properly convey back the tryResume() behavior. This then leads to what looks like an endless loop. I consider this to be a bug of the engine not only because it should be hardened against plugin misbehavior, but also because plugins may not be totally able to avoid this situation (depending on the type of and processing done by the plugin). - bugfix: testbench failed when not executed in UTC+1 timezone accidentally, the time zone information was kept inside some to-be-checked-for responses - temporary bugfix replaced by permanent one for message-induced off-by-one error (potential segfault) (see 4.6.2) The analysis has been completed and a better fix been crafted and integrated. - bugfix(minor): status variable was uninitialized However, this would have caused harm only if NO parser modules at all were loaded, which would lead to a defunctional configuration at all. And, even more important, this is impossible as two parser modules are built-in and thus can not be "not loaded", so we always have a minimum of two. --------------------------------------------------------------------------- Version 5.4.1 [v5-stable] (rgerhards), 2010-03-?? - added new property replacer option "date-rfc3164-buggyday" primarily to ease migration from syslog-ng. See property replacer doc for details. [backport from 5.5.3 because urgently needed by some] - imported all bugfixes vom 4.6.2 (see below) --------------------------------------------------------------------------- Version 5.4.0 [v5-stable] (rgerhards), 2010-03-08 *************************************************************************** * This is a new stable v5 version. It contains all fixes and enhancements * * made during the 5.3.x phase as well as those listed below. * * Note that the 5.2.x series was quite buggy and as such all users are * * strongly advised to upgrade to 5.4.0. * *************************************************************************** - bugfix: omruleset failed to work in many cases bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=179 Thanks to Ryan B. Lynch for reporting this issue. - bugfix: comment char ('#') in literal terminated script parsing and thus could not be used. but tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=119 [merged in from v3.22.2] --------------------------------------------------------------------------- Version 5.3.7 [BETA] (rgerhards), 2010-01-27 - bugfix: queues in direct mode could case a segfault, especially if an action failed for action queues. The issue was an invalid increment of a stack-based pointer which lead to destruction of the stack frame and thus a segfault on function return. Thanks to Michael Biebl for alerting us on this problem. - bugfix: hostname accidentally set to IP address for some message sources, for example imudp. Thanks to Anton for reporting this bug. [imported v4] - bugfix: ompgsql had problems with transaction support, what actually rendered it unusable. Thanks to forum user "horhe" for alerting me on this bug and helping to debug/fix it! [imported from 5.3.6] - bugfix: $CreateDirs variable not properly initialized, default thus was random (but most often "on") [imported from v3] - bugfix: potential segfaults during queue shutdown (bugs require certain non-standard settings to appear) Thanks to varmojfekoj for the patch [imported from 4.5.8] [backport from 5.5.2] - bugfix: wrong memory assignment for a config variable (probably without causing any harm) [backport from 5.2.2] - bugfix: rsyslog hangs when writing to a named pipe which nobody was reading. Thanks to Michael Biebl for reporting this bug. Bugzilla entry: http://bugzilla.adiscon.com/show_bug.cgi?id=169 [imported from 4.5.8] --------------------------------------------------------------------------- Version 5.3.6 [BETA] (rgerhards), 2010-01-13 - bugfix: ompgsql did not properly check the server connection in tryResume(), which could lead to rsyslog running in a tight loop - bugfix: suspension during beginTransaction() was not properly handled by rsyslog core - bugfix: omfile output was only written when buffer was full, not at end of transaction - bugfix: commit transaction was not properly conveyed to message layer, potentially resulting in non-message destruction and thus hangs - bugfix: enabling GSSServer crashes rsyslog startup Thanks to Tomas Kubina for the patch [imgssapi] - bugfix (kind of): check if TCP connection is still alive if using TLS Thanks to Jonathan Bond-Caron for the patch. - bugfix: $CreateDirs variable not properly initialized, default thus was random (but most often "on") [imported from v3] - bugfix: ompgsql had problems with transaction support, what actually rendered it unusable. Thanks to forum user "horhe" for alerting me on this bug and helping to debug/fix it! - bugfix: memory leak when sending messages in zip-compressed format Thanks to Naoya Nakazawa for analyzing this issue and providing a patch. - worked around an issue where omfile failed to compile on 32 bit platforms under some circumstances (this smells like a gcc problem, but a simple solution was available). Thanks to Kenneth Marshall for some advice. [backported from 5.5.x branch] --------------------------------------------------------------------------- Version 5.3.5 [BETA] (rgerhards), 2009-11-13 - some light performance enhancement by replacing time() call with much faster (at least under linux) gettimeofday() calls. - some improvement of omfile performance with dynafiles saved costly time() calls by employing a logical clock, which is sufficient for the use case - bugfix: omudpspoof miscalculated source and destination ports while this was probably not noticed for source ports, it resulted in almost all destination ports being wrong, except for the default port of 514, which by virtue of its binary representation was calculated correct (and probably thus the bug not earlier detected). - bugfixes imported from earlier releases * bugfix: named pipes did no longer work (they always got an open error) this was a regression from the omfile rewrite in 4.5.0 * bugfix(testbench): sequence check was not always performed correctly, that could result in tests reporting success when they actually failed - improved testbench: added tests for UDP forwarding and omudpspoof - doc bugfix: omudpspoof had wrong config command names ("om" missing) - bugfix [imported from 4.4.3]: $ActionExecOnlyOnceEveryInterval did not work. - [inport v4] improved testbench, contains now tcp and gzip test cases - [import v4] added a so-called "On Demand Debug" mode, in which debug output can be generated only after the process has started, but not right from the beginning. This is assumed to be useful for hard-to-find bugs. Also improved the doc on the debug system. - bugfix: segfault on startup when -q or -Q option was given [imported from v3-stable] --------------------------------------------------------------------------- Version 5.3.4 [DEVEL] (rgerhards), 2009-11-04 - added the ability to create custom message parsers - added $RulesetParser config directive that permits to bind specific parsers to specific rulesets - added omruleset output module, which provides great flexibility in action processing. THIS IS A VERY IMPORTANT ADDITION, see its doc for why. - added the capability to have ruleset-specific main message queues This offers considerable additional flexibility AND superior performance (in cases where multiple inputs now can avoid lock contention) - bugfix: correct default for escape ('#') character restored This was accidentally changed to '\\', thanks to David Lang for reporting - bugfix(testbench): testcase did not properly wait for rsyslogd shutdown thus some unpredictable behavior and a false negative test result could occur. --------------------------------------------------------------------------- Version 5.3.3 [DEVEL] (rgerhards), 2009-10-27 - simplified and thus speeded up the queue engine, also fixed some potential race conditions (in very unusual shutdown conditions) along the way. The threading model has seriously changes, so there may be some regressions. - enhanced test environment (including testbench): support for enhancing probability of memory addressing failure by using non-NULL default value for malloced memory (optional, only if requested by configure option). This helps to track down some otherwise undetected issues within the testbench. - bugfix: potential abort if inputname property was not set primarily a problem of imdiag - bugfix: message processing states were not set correctly in all cases however, this had no negative effect, as the message processing state was not evaluated when a batch was deleted, and that was the only case where the state could be wrong. --------------------------------------------------------------------------- Version 5.3.2 [DEVEL] (rgerhards), 2009-10-21 - enhanced omfile to support transactional interface. This will increase performance in many cases. - added multi-ruleset support to imudp - re-enabled input thread termination handling that does avoid thread cancellation where possible. This provides a more reliable mode of rsyslogd termination (canceling threads my result in not properly freed resources and potential later hangs, even though we perform proper cancel handling in our code). This is part of an effort to reduce thread cancellation as much as possible in rsyslog. NOTE: the code previously written code for this functionality had a subtle race condition. The new code solves that. - enhanced immark to support non-cancel input module termination - improved imudp so that epoll can be used in more environments, fixed potential compile time problem if EPOLL_CLOEXEC is not available. - some cleanup/slight improvement: * changed imuxsock to no longer use deprecated submitAndParseMsg() IF * changed submitAndParseMsg() interface to be a wrapper around the new way of message creation/submission. This enables older plugins to be used together with the new interface. The removal also enables us to drop a lot of duplicate code, reducing complexity and increasing maintainability. - bugfix: segfault when starting up with an invalid .qi file for a disk queue Failed for both pure disk as well as DA queues. Now, we emit an error message and disable disk queueing facility. - bugfix: potential segfault on messages with empty MSG part. This was a recently introduced regression. - bugfix: debug string larger than 1K were improperly displayed. Max size is now 32K, and if a string is even longer it is meaningfully truncated. --------------------------------------------------------------------------- Version 5.3.1 [DEVEL] (rgerhards), 2009-10-05 - added $AbortOnUncleanConfig directive - permits to prevent startup when there are problems with the configuration file. See it's doc for details. - included some important fixes from v4-stable: * bugfix: invalid handling of zero-sized messages * bugfix: zero-sized UDP messages are no longer processed * bugfix: random data could be appended to message * bugfix: reverse lookup reduction logic in imudp do DNS queries too often - bugfixes imported from 4.5.4: * bugfix: potential segfault in stream writer on destruction * bugfix: potential race in object loader (obj.c) during use/release * bugfixes: potential problems in out file zip writer --------------------------------------------------------------------------- Version 5.3.0 [DEVEL] (rgerhards), 2009-09-14 - begun to add simple GUI programs to gain insight into running rsyslogd instances and help setup and troubleshooting (active via the --enable-gui ./configure switch) - changed imudp to utilize epoll(), where available. This shall provide slightly better performance (just slightly because we called select() rather infrequently on a busy system) --------------------------------------------------------------------------- Version 5.2.2 [v5-stable] (rgerhards), 2009-11-?? - bugfix: enabling GSSServer crashes rsyslog startup Thanks to Tomas Kubina for the patch [imgssapi] --------------------------------------------------------------------------- Version 5.2.1 [v5-stable] (rgerhards), 2009-11-02 - bugfix [imported from 4.4.3]: $ActionExecOnlyOnceEveryInterval did not work. - bugfix: segfault on startup when -q or -Q option was given [imported from v3-stable] --------------------------------------------------------------------------- Version 5.2.0 [v5-stable] (rgerhards), 2009-11-02 This is a re-release of version 5.1.6 as stable after we did not get any bug reports during the whole beta phase. Still, this first v5-stable may not be as stable as one hopes for, I am not sure if we did not get bug reports just because nobody tried it. Anyhow, we need to go forward and so we have the initial v5-stable. --------------------------------------------------------------------------- Version 5.1.6 [v5-beta] (rgerhards), 2009-10-15 - feature imports from v4.5.6 - bugfix: potential race condition when queue worker threads were terminated - bugfix: solved potential (temporary) stall of messages when the queue was almost empty and few new data added (caused testbench to sometimes hang!) - fixed some race condition in testbench - added more elaborate diagnostics to parts of the testbench - bugfixes imported from 4.5.4: * bugfix: potential segfault in stream writer on destruction * bugfix: potential race in object loader (obj.c) during use/release * bugfixes: potential problems in out file zip writer - included some important fixes from 4.4.2: * bugfix: invalid handling of zero-sized messages * bugfix: zero-sized UDP messages are no longer processed * bugfix: random data could be appended to message * bugfix: reverse lookup reduction logic in imudp do DNS queries too often --------------------------------------------------------------------------- Version 5.1.5 [v5-beta] (rgerhards), 2009-09-11 - added new config option $ActionWriteAllMarkMessages this option permits to process mark messages under all circumstances, even if an action was recently called. This can be useful to use mark messages as a kind of heartbeat. - added new config option $InputUnixListenSocketCreatePath to permit the auto-creation of paths to additional log sockets. This turns out to be useful if they reside on temporary file systems and rsyslogd starts up before the daemons that create these sockets (rsyslogd always creates the socket itself if it does not exist). - added $LogRSyslogStatusMessages configuration directive permitting to turn off rsyslog start/stop/HUP messages. See Debian ticket http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=463793 - bugfix: hostnames with dashes in them were incorrectly treated as malformed, thus causing them to be treated as TAG (this was a regression introduced from the "rfc3164 strict" change in 4.5.0). Testbench has been updated to include a sample message with a hostname containing a dash. - bugfix: strings improperly reused, resulting in some message properties be populated with strings from previous messages. This was caused by an improper predicate check. - added new config directive $omfileForceChown [import from 4.7.0] --------------------------------------------------------------------------- Version 5.1.4 [DEVEL] (rgerhards), 2009-08-20 - legacy syslog parser changed so that it now accepts date stamps in wrong case. Some devices seem to create them and I do not see any harm in supporting that. - added $InputTCPMaxListeners directive - permits to specify how many TCP servers shall be possible (default is 20). - bugfix: memory leak with some input modules. Those inputs that use parseAndSubmitMsg() leak two small memory blocks with every message. Typically, those process only relatively few messages, so the issue does most probably not have any effect in practice. - bugfix: if tcp listen port could not be created, no error message was emitted - bugfix: discard action did not work (did not discard messages) - bugfix: discard action caused segfault - bugfix: potential segfault in output file writer (omfile) In async write mode, we use modular arithmetic to index the output buffer array. However, the counter variables accidentally were signed, thus resulting in negative indices after integer overflow. That in turn could lead to segfaults, but was depending on the memory layout of the instance in question (which in turn depended on a number of variables, like compile settings but also configuration). The counters are now unsigned (as they always should have been) and so the dangling mis-indexing does no longer happen. This bug potentially affected all installations, even if only some may actually have seen a segfault. --------------------------------------------------------------------------- Version 5.1.3 [DEVEL] (rgerhards), 2009-07-28 - architecture change: queue now always has at least one worker thread if not running in direct mode. Previous versions could run without any active workers. This simplifies the code at a very small expense. See v5 compatibility note document for more in-depth discussion. - enhance: UDP spoofing supported via new output module omudpspoof See the omudpspoof documentation for details and samples - bugfix: message could be truncated after TAG, often when forwarding This was a result of an internal processing error if maximum field sizes had been specified in the property replacer. - bugfix: minor static memory leak while reading configuration did NOT leak based on message volume - internal: added ability to terminate input modules not via pthread_cancel but an alternate approach via pthread_kill. This is somewhat safer as we do not need to think about the cancel-safeness of all libraries we use. However, not all inputs can easily supported, so this now is a feature that can be requested by the input module (the most important ones request it). --------------------------------------------------------------------------- Version 5.1.2 [DEVEL] (rgerhards), 2009-07-08 - bugfix: properties inputname, fromhost, fromhost-ip, msg were lost when working with disk queues - some performance enhancements - bugfix: abort condition when RecvFrom was not set and message reduction was on. Happened e.g. with imuxsock. - added $klogConsoleLogLevel directive which permits to set a new console log level while rsyslog is active - some internal code cleanup --------------------------------------------------------------------------- Version 5.1.1 [DEVEL] (rgerhards), 2009-07-03 - bugfix: huge memory leak in queue engine (made rsyslogd unusable in production). Occurred if at least one queue was in direct mode (the default for action queues) - imported many performance optimizations from v4-devel (4.5.0) - bugfix: subtle (and usually irrelevant) issue in timeout processing timeout could be one second too early if nanoseconds wrapped - set a more sensible timeout for shutdown, now 1.5 seconds to complete processing (this also removes those cases where the shutdown message was not written because the termination happened before it) --------------------------------------------------------------------------- Version 5.1.0 [DEVEL] (rgerhards), 2009-05-29 *********************************** NOTE ********************************** The v5 versions of rsyslog feature a greatly redesigned queue engine. The major theme for the v5 release is twofold: a) greatly improved performance b) enable audit-grade processing Here, audit-grade processing means that rsyslog, if used together with audit-grade transports and configured correctly, will never lose messages that already have been acknowledged, not even in fatal failure cases like sudden loss of power. Note that large parts of rsyslog's important core components have been restructured to support these design goals. As such, early versions of the engine will probably be less stable than the v3/v4 engine. Also note that the initial versions do not cover all and everything. As usual, the code will evolve toward the final goal as version numbers increase. *********************************** NOTE ********************************** - redesigned queue engine so that it supports ultra-reliable operations This resulted in a rewrite of large parts. The new capability can be used to build audit-grade systems on the basis of rsyslog. - added $MainMsgQueueDequeueBatchSize and $ActionQueueDequeueBatchSize configuration directives - implemented a new transactional output module interface which provides superior performance (for databases potentially far superior performance) - increased ompgsql performance by adapting to new transactional output module interface --------------------------------------------------------------------------- Version 4.8.1 [v4-stable], 2011-09-?? - increased max config file line size to 64k We now also emit an error message if even 64k is not enough (not doing so previously may rightfully be considered as a bug) - bugfix: omprog made rsyslog abort on startup if not binary to execute was configured - bugfix: $ActionExecOnlyOnce interval did not work properly Thanks to Tomas Heinrich for the patch - bugfix: potential abort if ultra-large file io buffers are used and dynafile cache exhausts address space (primarily a problem on 32 bit platforms) - bugfix: potential abort after reading invalid X.509 certificate closes: http://bugzilla.adiscon.com/show_bug.cgi?id=290 Thanks to Tomas Heinrich for the patch. - bugfix: potential fatal abort in omgssapi Thanks to Tomas Heinrich for the patch. - added doc for omprog - FQDN hostname for multihomed host was not always set to the correct name if multiple aliases existed. Thanks to Tomas Heinreich for the patch. - re-licensed larger parts of the codebase under the Apache license 2.0 --------------------------------------------------------------------------- Version 4.8.0 [v4-stable] (rgerhards), 2011-09-07 *************************************************************************** * This is a new stable v4 version. It contains all fixes and enhancements * * made during the 4.7.x phase as well as those listed below. * * Note: major new development to v4 is concluded and will only be done * * for custom projects. * *************************************************************************** There are no changes compared to 4.7.5, just a re-release with the new version number as new v4-stable. The most important new feature is Solaris support. --------------------------------------------------------------------------- Version 4.7.5 [v4-beta], 2011-09-01 - bugfix/security: off-by-two bug in legacy syslog parser, CVE-2011-3200 - bugfix: potential misaddressing in property replacer - bugfix: The NUL-Byte for the syslogtag was not copied in MsgDup (msg.c) --------------------------------------------------------------------------- Version 4.7.4 [v4-beta] (rgerhards), 2011-07-11 - added support for the ":omusrmsg:" syntax in configuring user messages - added support for the ":omfile:" syntax in configuring user messages - added $LocalHostName config directive - bugfix: PRI was invalid on Solaris for message from local log socket Version 4.7.3 [v4-devel] (rgerhards), 2010-11-25 - added omuxsock, which permits to write message to local Unix sockets this is the counterpart to imuxsock, enabling fast local forwarding - added imptcp, a simplified, Linux-specific and potentially fast syslog plain tcp input plugin (NOT supporting TLS!) - bugfix: a couple of problems that imfile had on some platforms, namely Ubuntu (not their fault, but occurred there) - bugfix: imfile utilizes 32 bit to track offset. Most importantly, this problem can not experienced on Fedora 64 bit OS (which has 64 bit long's!) - added the $InputFilePersistStateInterval config directive to imfile - changed imfile so that the state file is never deleted (makes imfile more robust in regard to fatal failures) --------------------------------------------------------------------------- Version 4.7.2 [v4-devel] (rgerhards), 2010-05-03 - bugfix: problems with atomic operations emulation replaced atomic operation emulation with new code. The previous code seemed to have some issue and also limited concurrency severely. The whole atomic operation emulation has been rewritten. - added new $Sleep directive to hold processing for a couple of seconds during startup - bugfix: programname filter in ! configuration can not be reset Thanks to Kiss Gabor for the patch. --------------------------------------------------------------------------- Version 4.7.1 [v4-devel] (rgerhards), 2010-04-22 - Solaris support much improved -- was not truly usable in 4.7.0 Solaris is no longer supported in imklog, but rather there is a new plugin imsolaris, which is used to pull local log sources on a Solaris machine. - testbench improvement: Java is no longer needed for testing tool creation --------------------------------------------------------------------------- Version 4.7.0 [v4-devel] (rgerhards), 2010-04-14 - new: support for Solaris added (but not yet the Solaris door API) - added function getenv() to RainerScript - added new config option $InputUnixListenSocketCreatePath to permit the auto-creation of paths to additional log sockets. This turns out to be useful if they reside on temporary file systems and rsyslogd starts up before the daemons that create these sockets (rsyslogd always creates the socket itself if it does not exist). - added $LogRSyslogStatusMessages configuration directive permitting to turn off rsyslog start/stop/HUP messages. See Debian ticket http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=463793 - added new config directive $omfileForceChown to (try to) fix some broken system configs. See ticket for details: http://bugzilla.adiscon.com/show_bug.cgi?id=150 - added $EscapeControlCharacterTab config directive Thanks to Jonathan Bond-Caron for the patch. - added option to use unlimited-size select() calls Thanks to varmojfekoj for the patch - debugondemand mode caused backgrounding to fail - close to a bug, but I'd consider the ability to background in this mode a new feature... - bugfix (kind of): check if TCP connection is still alive if using TLS Thanks to Jonathan Bond-Caron for the patch. - imported changes from 4.5.7 and below - bugfix: potential segfault when -p command line option was used Thanks for varmojfekoj for pointing me at this bug. - imported changes from 4.5.6 and below --------------------------------------------------------------------------- Version 4.6.8 [v4-stable] (rgerhards), 2011-09-01 - bugfix/security: off-by-two bug in legacy syslog parser, CVE-2011-3200 - bugfix: potential misaddressing in property replacer - bugfix: memcpy overflow can occur in allowed sender checking if a name is resolved to IPv4-mapped-on-IPv6 address Found by Ismail Dönmez at suse - bugfix: The NUL-Byte for the syslogtag was not copied in MsgDup (msg.c) --------------------------------------------------------------------------- Version 4.6.7 [v4-stable] (rgerhards), 2011-07-11 - added support for the ":omusrmsg:" syntax in configuring user messages - added support for the ":omfile:" syntax for actions --------------------------------------------------------------------------- Version 4.6.6 [v4-stable] (rgerhards), 2011-06-24 - bugfix: memory leak in imtcp & subsystems under some circumstances This leak is tied to error conditions which lead to incorrect cleanup of some data structures. [backport from v6, limited testing under v4] - bugfix: invalid processing in QUEUE_FULL condition If the the multi-submit interface was used and a QUEUE_FULL condition occurred, the failed message was properly destructed. However, the rest of the input batch, if it existed, was not processed. So this lead to potential loss of messages and a memory leak. The potential loss of messages was IMHO minor, because they would have been dropped in most cases due to the queue remaining full, but very few lucky ones from the batch may have made it. Anyhow, this has now been changed so that the rest of the batch is properly tried to be enqueued and, if not possible, destructed. - bugfix: invalid storage type for config variables - bugfix: stream driver mode was not correctly set on tcp output on big endian systems. thanks varmojfekoj for the patch - bugfix: IPv6-address could not be specified in omrelp this was due to improper parsing of ":" closes: http://bugzilla.adiscon.com/show_bug.cgi?id=250 - bugfix: memory and file descriptor leak in stream processing Leaks could occur under some circumstances if the file stream handler errored out during the open call. Among others, this could cause very big memory leaks if there were a problem with unreadable disk queue files. In regard to the memory leak, this closes: http://bugzilla.adiscon.com/show_bug.cgi?id=256 - bugfix: imfile potentially duplicates lines This can happen when 0 bytes are read from the input file, and some writer appends data to the file BEFORE we check if a rollover happens. The check for rollover uses the inode and size as a criterion. So far, we checked for equality of sizes, which is not given in this scenario, but that does not indicate a rollover. From the source code comments: Note that when we check the size, we MUST NOT check for equality. The reason is that the file may have been written right after we did try to read (so the file size has increased). That is NOT in indicator of a rollover (this is an actual bug scenario we experienced). So we need to check if the new size is smaller than what we already have seen! Also, under some circumstances an invalid truncation was detected. This code has now been removed, a file change (and thus resent) is only detected if the inode number changes. - bugfix: a couple of problems that imfile had on some platforms, namely Ubuntu (not their fault, but occurred there) - bugfix: imfile utilizes 32 bit to track offset. Most importantly, this problem can not experienced on Fedora 64 bit OS (which has 64 bit long's!) - bugfix: abort if imfile reads file line of more than 64KiB Thanks to Peter Eisentraut for reporting and analyzing this problem. bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=221 - bugfix: omlibdbi did not use password from rsyslog.con closes: http://bugzilla.adiscon.com/show_bug.cgi?id=203 - bugfix: TCP connection invalidly aborted when messages needed to be discarded (due to QUEUE_FULL or similar problem) - bugfix: a slightly more informative error message when a TCP connections is aborted - bugfix: timestamp was incorrectly calculated for timezones with minute offset closes: http://bugzilla.adiscon.com/show_bug.cgi?id=271 - some improvements thanks to clang's static code analyzer o overall cleanup (mostly unnecessary writes and otherwise unused stuff) o bugfix: fixed a very remote problem in msg.c which could occur when running under extremely low memory conditions --------------------------------------------------------------------------- Version 4.6.5 [v4-stable] (rgerhards), 2010-11-24 - bugfix(important): problem in TLS handling could cause rsyslog to loop in a tight loop, effectively disabling functionality and bearing the risk of unresponsiveness of the whole system. Bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=194 --------------------------------------------------------------------------- Version 4.6.4 [v4-stable] (rgerhards), 2010-08-05 - bugfix: zero-sized (empty) messages were processed by imtcp they are now dropped as they always should have been - bugfix: programname filter in ! configuration can not be reset Thanks to Kiss Gabor for the patch. --------------------------------------------------------------------------- Version 4.6.3 [v4-stable] (rgerhards), 2010-07-07 - improved testbench - added test with truly random data received via syslog to test robustness - added new configure option that permits to disable and enable an extended testbench - bugfix: segfault on HUP when "HUPIsRestart" was set to "on" thanks varmojfekoj for the patch - bugfix: default for $OMFileFlushOnTXEnd was wrong ("off"). This, in default mode, caused buffered writing to be used, what means that it looked like no output were written or partial lines. Thanks to Michael Biebl for pointing out this bug. - bugfix: testbench failed when not executed in UTC+1 timezone accidentally, the time zone information was kept inside some to-be-checked-for responses - temporary bugfix replaced by permanent one for message-induced off-by-one error (potential segfault) (see 4.6.2) The analysis has been completed and a better fix been crafted and integrated. - bugfix: the T/P/E config size specifiers did not work properly under all 32-bit platforms - bugfix: local unix system log socket was deleted even when it was not configured - some doc fixes; incorrect config samples could cause confusion thanks to Anthony Edwards for pointing the problems out --------------------------------------------------------------------------- Version 4.6.2 [v4-stable] (rgerhards), 2010-03-26 - new feature: "." action type added to support writing files to relative paths (this is primarily meant as a debug aid) - added replacements for atomic instructions on systems that do not support them. [backport of Stefen Sledz' patch for v5) - new feature: $OMFileAsyncWriting directive added it permits to specify if asynchronous writing should be done or not - bugfix(temporary): message-induced off-by-one error (potential segfault) Some types of malformed messages could trigger an off-by-one error (for example, \0 or \n as the last character, and generally control character escaption is questionable). This is due to not strictly following a the \0 or string counted string paradigm (during the last optimization on the cstring class). As a temporary fix, we have introduced a proper recalculation of the size. However, a final patch is expected in the future. See bug tracker for further details and when the final patch will be available: http://bugzilla.adiscon.com/show_bug.cgi?id=184 Note that the current patch is considered sufficient to solve the situation, but it requires a bit more runtime than desirable. - bugfix: potential segfault in dynafile cache This bug was triggered by an open failure. The the cache was full and a new entry needed to be placed inside it, a victim for eviction was selected. That victim was freed, then the open of the new file tried. If the open failed, the victim entry was still freed, and the function exited. However, on next invocation and cache search, the victim entry was used as if it were populated, most probably resulting in a segfault. - bugfix: race condition during directory creation If multiple files try to create a directory at (almost) the same time, some of them may fail. This is a data race and also exists with other processes that may create the same directory. We do now check for this condition and gracefully handle it. - bugfix: potential re-use of free()ed file stream object in omfile when dynaCache is enabled, the cache is full, a new entry needs to be allocated, thus the LRU discarded, then a new entry is opend and that fails. In that case, it looks like the discarded stream may be reused improperly (based on code analysis, test case and confirmation pending) - added new property replacer option "date-rfc3164-buggyday" primarily to ease migration from syslog-ng. See property replacer doc for details. [backport from 5.5.3 because urgently needed by some] - improved testbench - bugfix: invalid buffer write in (file) stream class currently being accessed buffer could be overwritten with new data. While this probably did not cause access violations, it could case loss and/or duplication of some data (definitely a race with no deterministic outcome) - bugfix: potential hang condition during filestream close predicate was not properly checked when waiting for the background file writer - bugfix: improper synchronization when "$OMFileFlushOnTXEnd on" was used Internal data structures were not properly protected due to missing mutex calls. - bugfix: potential data loss during file stream shutdown - bugfix: potential problems during file stream shutdown The shutdown/close sequence was not clean, what potentially (but unlikely) could lead to some issues. We have not been able to describe any fatal cases, but there was some bug potential. Sequence has now been straighted out. - bugfix: potential problem (loop, abort) when file write error occurred When a write error occurred in stream.c, variable iWritten had the error code but this was handled as if it were the actual number of bytes written. That was used in pointer arithmetic later on, and thus could lead to all sorts of problems. However, this could only happen if the error was EINTR or the file in question was a tty. All other cases were handled properly. Now, iWritten is reset to zero in such cases, resulting in proper retries. - bugfix: $omfileFlushOnTXEnd was turned on when set to off and vice versa due to an invalid check - bugfix: recent patch to fix small memory leak could cause invalid free. This could only happen during config file parsing. - bugfix(minor): handling of extremely large strings in dbgprintf() fixed Previously, it could lead to garbage output and, in extreme cases, also to segfaults. Note: this was a problem only when debug output was actually enabled, so it caused no problem in production use. - bugfix(minor): BSD_SO_COMPAT query function had some global vars not properly initialized. However, in practice the loader initializes them with zero, the desired value, so there were no actual issue in almost all cases. --------------------------------------------------------------------------- Version 4.6.1 [v4-stable] (rgerhards), 2010-03-04 - re-enabled old pipe output (using new module ompipe, built-in) after some problems with pipes (and especially in regard to xconsole) were discovered. Thanks to Michael Biebl for reporting the issues. - bugfix: potential problems with large file support could cause segfault ... and other weird problems. This seemed to affect 32bit-platforms only, but I can not totally outrule there were issues on other platforms as well. The previous code could cause system data types to be defined inconsistently, and that could lead to various troubles. Special thanks go to the Mandriva team for identifying an initial problem, help discussing it and ultimately a fix they contributed. - bugfix: fixed problem that caused compilation on FreeBSD 9.0 to fail. bugtracker: http://bugzilla.adiscon.com/show_bug.cgi?id=181 Thanks to Christiano for reporting. - bugfix: potential segfault in omfile when a dynafile open failed In that case, a partial cache entry was written, and some internal pointers (iCurrElt) not correctly updated. In the next iteration, that could lead to a segfault, especially if iCurrElt then points to the then-partial record. Not very likely, but could happen in practice. - bugfix (theoretical): potential segfault in omfile under low memory condition. This is only a theoretical bug, because it would only happen when strdup() fails to allocate memory - which is highly unlikely and will probably lead to all other sorts of errors. - bugfix: comment char ('#') in literal terminated script parsing and thus could not be used. but tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=119 [merged in from v3.22.2] --------------------------------------------------------------------------- Version 4.6.0 [v4-stable] (rgerhards), 2010-02-24 *************************************************************************** * This is a new stable v4 version. It contains all fixes and enhancements * * made during the 4.5.x phase as well as those listed below. * * Note: this version is scheduled to conclude the v4 development process. * * Do not expect any more new developments in v4. The focus is now * * on v5 (what also means we have a single devel branch again). * * ("development" means new feature development, bug fixes are of * * course provided for v4-stable) * *************************************************************************** - improved testbench to contain samples for totally malformed messages which miss parts of the message content - bugfix: some malformed messages could lead to a missing LF inside files or some other missing parts of the template content. - bugfix: if a message ended immediately with a hostname, the hostname was mistakenly interpreted as TAG, and localhost be used as hostname - bugfix: message without MSG part could case a segfault [backported from v5 commit 98d1ed504ec001728955a5bcd7916f64cd85f39f] This actually was a "recent" regression, but I did not realize that it was introduced by the performance optimization in v4-devel. Shame on me for having two devel versions at the same time... --------------------------------------------------------------------------- Version 4.5.8 [v4-beta] (rgerhards), 2010-02-10 - enhanced doc for using PostgreSQL Thanks to Marc Schiffbauer for the new/updated doc - bugfix: property replacer returned invalid parameters under some (unusual) conditions. In extreme cases, this could lead to garbled logs and/or a system failure. - bugfix: invalid length returned (often) when using regular expressions inside the property replacer - bugfix: submatch regex in property replacer did not honor "return 0 on no match" config case - bugfix: imuxsock incorrectly stated inputname "imudp" Thanks to Ryan Lynch for reporting this. - (slightly) enhanced support for FreeBSD by setting _PATH_MODDIR to the correct value on FreeBSD. Thanks to Cristiano for the patch. - bugfix: -d did not enable display of debug messages regression from introduction of "debug on demand" mode Thanks to Michael Biebl for reporting this bug - bugfix: blanks inside file names did not terminate file name parsing. This could result in the whole rest of a line (including comments) to be treated as file name in "write to file" actions. Thanks to Jack for reporting this issue. - bugfix: rsyslog hang when writing to a named pipe which nobody was reading. Thanks to Michael Biebl for reporting this bug. Bugzilla entry: http://bugzilla.adiscon.com/show_bug.cgi?id=169 - bugfix: potential segfaults during queue shutdown (bugs require certain non-standard settings to appear) Thanks to varmojfekoj for the patch --------------------------------------------------------------------------- Version 4.5.7 [v4-beta] (rgerhards), 2009-11-18 - added a so-called "On Demand Debug" mode, in which debug output can be generated only after the process has started, but not right from the beginning. This is assumed to be useful for hard-to-find bugs. Also improved the doc on the debug system. - bugfix (kind of): check if TCP connection is still alive if using TLS Thanks to Jonathan Bond-Caron for the patch. - bugfix: hostname accidentally set to IP address for some message sources, for example imudp. Thanks to Anton for reporting this bug. - bugfix [imported from 4.4.3]: $ActionExecOnlyOnceEveryInterval did not work. --------------------------------------------------------------------------- Version 4.5.6 [v4-beta] (rgerhards), 2009-11-05 - bugfix: named pipes did no longer work (they always got an open error) this was a regression from the omfile rewrite in 4.5.0 - bugfix(minor): diag function returned wrong queue member count for the main queue if an active DA queue existed. This had no relevance to real deployments (assuming they are not running the debug/diagnostic module...), but sometimes caused grief and false alerts in the testbench. - included some important fixes from v4-stable: * bugfix: invalid handling of zero-sized messages * bugfix: zero-sized UDP messages are no longer processed * bugfix: random data could be appended to message * bugfix: reverse lookup reduction logic in imudp do DNS queries too often - bugfix(testbench): testcase did not properly wait for rsyslog shutdown thus some unpredictable behavior and a false negative test result could occur. [BACKPORTED from v5] - bugfix(testbench): sequence check was not always performed correctly, that could result in tests reporting success when they actually failed --------------------------------------------------------------------------- Version 4.5.5 [v4-beta] (rgerhards), 2009-10-21 - added $InputTCPServerNotifyOnConnectionClose config directive see doc for details - bugfix: debug string larger than 1K were improperly displayed. Max size is now 32K - bugfix: invalid storage class selected for some size config parameters. This resulted in wrong values. The most prominent victim was the directory creation mode, which was set to zero in some cases. For details, see related blog post: http://blog.gerhards.net/2009/10/another-note-on-hard-to-find-bugs.html --------------------------------------------------------------------------- Version 4.5.4 [v4-beta] (rgerhards), 2009-09-29 - bugfix: potential segfault in stream writer on destruction Most severely affected omfile. The problem was that some buffers were freed before the asynchronous writer thread was shut down. So the writer thread accessed invalid data, which may even already be overwritten. Symptoms (with omfile) were segfaults, garbled data and files with random names placed around the file system (most prominently into the root directory). Special thanks to Aaron for helping to track this down. - bugfix: potential race in object loader (obj.c) during use/release of object interface - bugfixes: potential problems in out file zip writer. Problems could lead to abort and/or memory leak. The module is now hardened in a very conservative way, which is sub-optimal from a performance point of view. This should be improved if it has proven reliable in practice. --------------------------------------------------------------------------- Version 4.5.3 [v4-beta] (rgerhards), 2009-09-17 - bugfix: repeated messages were incorrectly processed this could lead to loss of the repeated message content. As a side- effect, it could probably also be possible that some segfault occurs (quite unlikely). The root cause was that some counters introduced during the malloc optimizations were not properly duplicated in MsgDup(). Note that repeated message processing is not enabled by default. - bugfix: message sanitation had some issues: - control character DEL was not properly escaped - NUL and LF characters were not properly stripped if no control character replacement was to be done - NUL characters in the message body were silently dropped (this was a regression introduced by some of the recent optimizations) - bugfix: strings improperly reused, resulting in some message properties be populated with strings from previous messages. This was caused by an improper predicate check. [backported from v5] - fixed some minor portability issues - bugfix: reverse lookup reduction logic in imudp do DNS queries too often [imported from 4.4.2] --------------------------------------------------------------------------- Version 4.5.2 [v4-beta] (rgerhards), 2009-08-21 - legacy syslog parser changed so that it now accepts date stamps in wrong case. Some devices seem to create them and I do not see any harm in supporting that. - added $InputTCPMaxListeners directive - permits to specify how many TCP servers shall be possible (default is 20). - bugfix: memory leak with some input modules. Those inputs that use parseAndSubmitMsg() leak two small memory blocks with every message. Typically, those process only relatively few messages, so the issue does most probably not have any effect in practice. - bugfix: if tcp listen port could not be created, no error message was emitted - bugfix: potential segfault in output file writer (omfile) In async write mode, we use modular arithmetic to index the output buffer array. However, the counter variables accidentally were signed, thus resulting in negative indices after integer overflow. That in turn could lead to segfaults, but was depending on the memory layout of the instance in question (which in turn depended on a number of variables, like compile settings but also configuration). The counters are now unsigned (as they always should have been) and so the dangling mis-indexing does no longer happen. This bug potentially affected all installations, even if only some may actually have seen a segfault. - bugfix: hostnames with dashes in them were incorrectly treated as malformed, thus causing them to be treated as TAG (this was a regression introduced from the "rfc3164 strict" change in 4.5.0). --------------------------------------------------------------------------- Version 4.5.1 [DEVEL] (rgerhards), 2009-07-15 - CONFIG CHANGE: $HUPisRestart default is now "off". We are doing this to support removal of restart-type HUP in v5. - bugfix: fromhost-ip was sometimes truncated - bugfix: potential segfault when zip-compressed syslog records were received (double free) - bugfix: properties inputname, fromhost, fromhost-ip, msg were lost when working with disk queues - performance enhancement: much faster, up to twice as fast (depending on configuration) - bugfix: abort condition when RecvFrom was not set and message reduction was on. Happened e.g. with imuxsock. - added $klogConsoleLogLevel directive which permits to set a new console log level while rsyslog is active - bugfix: message could be truncated after TAG, often when forwarding This was a result of an internal processing error if maximum field sizes had been specified in the property replacer. - added ability for the TCP output action to "rebind" its send socket after sending n messages (actually, it re-opens the connection, the name is used because this is a concept very similar to $ActionUDPRebindInterval). New config directive $ActionSendTCPRebindInterval added for the purpose. By default, rebinding is disabled. This is considered useful for load balancers. - testbench improvements --------------------------------------------------------------------------- Version 4.5.0 [DEVEL] (rgerhards), 2009-07-02 - activation order of inputs changed, they are now activated only after privileges are dropped. Thanks to Michael Terry for the patch. - greatly improved performance - greatly reduced memory requirements of msg object to around half of the previous demand. This means that more messages can be stored in core! Due to fewer cache misses, this also means some performance improvement. - improved config error messages: now contain a copy of the config line that (most likely) caused the error - reduced max value for $DynaFileCacheSize to 1,000 (the former maximum of 10,000 really made no sense, even 1,000 is very high, but we like to keep the user in control ;)). - added capability to fsync() queue disk files for enhanced reliability (also add's speed, because you do no longer need to run the whole file system in sync mode) - more strict parsing of the hostname in rfc3164 mode, hopefully removes false positives (but may cause some trouble with hostname parsing). For details, see this bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=126 - omfile rewrite to natively support zip files (includes large extension of the stream class) - added configuration commands (see doc for explanations) * $OMFileZipLevel * $OMFileIOBufferSize * $OMFileFlushOnTXEnd * $MainMsgQueueSyncQueueFiles * $ActionQueueSyncQueueFiles - done some memory accesses explicitly atomic - bugfix: subtle (and usually irrelevant) issue in timeout processing timeout could be one second too early if nanoseconds wrapped - set a more sensible timeout for shutdown, now 1.5 seconds to complete processing (this also removes those cases where the shutdown message was not written because the termination happened before it) - internal bugfix: object pointer was only reset to NULL when an object was actually destructed. This most likely had no effect to existing code, but it may also have caused trouble in remote cases. Similarly, the fix may also cause trouble... - bugfix: missing initialization during timestamp creation This could lead to timestamps written in the wrong format, but not to an abort --------------------------------------------------------------------------- Version 4.4.3 [v4-stable] (rgerhards), 2009-10-?? - bugfix: several smaller bugs resolved after flexelint review Thanks to varmojfekoj for the patch. - bugfix: $ActionExecOnlyOnceEveryInterval did not work. This was a regression from the time() optimizations done in v4. Bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=143 Thanks to Klaus Tachtler for reporting this bug. - bugfix: potential segfault on queue shutdown Thanks to varmojfekoj for the patch. - bugfix: potential hang condition on queue shutdown [imported from v3-stable] - bugfix: segfault on startup when -q or -Q option was given [imported from v3-stable] --------------------------------------------------------------------------- Version 4.4.2 [v4-stable] (rgerhards), 2009-10-09 - bugfix: invalid handling of zero-sized messages, could lead to mis- addressing and potential memory corruption/segfault - bugfix: zero-sized UDP messages are no longer processed until now, they were forwarded to processing, but this makes no sense Also, it looks like the system seems to provide a zero return code on a UDP recvfrom() from time to time for some internal reasons. These "receives" are now silently ignored. - bugfix: random data could be appended to message, possibly causing segfaults - bugfix: reverse lookup reduction logic in imudp do DNS queries too often A comparison was done between the current and the former source address. However, this was done on the full sockaddr_storage structure and not on the host address only. This has now been changed for IPv4 and IPv6. The end result of this bug could be a higher UDP message loss rate than necessary (note that UDP message loss can not totally be avoided due to the UDP spec) --------------------------------------------------------------------------- Version 4.4.1 [v4-stable] (rgerhards), 2009-09-02 - features requiring Java are automatically disabled if Java is not present (thanks to Michael Biebl for his help!) - bugfix: invalid double-quoted PRI, among others in outgoing messages This causes grief with all receivers. Bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=147 - bugfix: Java testing tools were required, even if testbench was disabled This resulted in build errors if no Java was present on the build system, even though none of the selected option actually required Java. (I forgot to backport a similar fix to newer releases). - bugfix (backport): omfwd segfault Note that the original (higher version) patch states this happens only when debugging mode is turned on. That statement is wrong: if debug mode is turned off, the message is not being emitted, but the division by zero in the actual parameters still happens. --------------------------------------------------------------------------- Version 4.4.0 [v4-stable] (rgerhards), 2009-08-21 - bugfix: stderr/stdout were not closed to be able to emit error messages, but this caused ssh sessions to hang. Now we close them after the initial initialization. See forum thread: http://kb.monitorware.com/controlling-terminal-issues-t9875.html - bugfix: sending syslog messages with zip compression did not work --------------------------------------------------------------------------- Version 4.3.2 [v4-beta] (rgerhards), 2009-06-24 - removed long-obsoleted property UxTradMsg - added a generic network stream server (in addition to rather specific syslog tcp server) - added ability for the UDP output action to rebind its send socket after sending n messages. New config directive $ActionSendUDPRebindInterval added for the purpose. By default, rebinding is disabled. This is considered useful for load balancers. - bugfix: imdiag/imtcp had a race condition - improved testbench (now much better code design and reuse) - added config switch --enable-testbench=no to turn off testbench --------------------------------------------------------------------------- Version 4.3.1 [DEVEL] (rgerhards), 2009-05-25 - added capability to run multiple tcp listeners (on different ports) - performance enhancement: imtcp calls parser no longer on input thread but rather inside on of the potentially many main msg queue worker threads (an enhancement scheduled for all input plugins where this is possible) - added $GenerateConfigGraph configuration command which can be used to generate nice-looking (and very informative) rsyslog configuration graphs. - added $ActionName configuration directive (currently only used for graph generation, but may find other uses) - improved doc * added (hopefully) easier to grasp queue explanation - improved testbench * added tests for queue disk-only mode (checks disk queue logic) - bugfix: light and full delay watermarks had invalid values, badly affecting performance for delayable inputs - build system improvements - thanks to Michael Biebl - added new testing module imdiag, which enables to talk to the rsyslog core at runtime. The current implementation is only a beginning, but can be expanded over time --------------------------------------------------------------------------- Version 4.3.0 [DEVEL] (rgerhards), 2009-04-17 - new feature: new output plugin omprog, which permits to start program and feed it (via its stdin) with syslog messages. If the program terminates, it is restarted. - improved internal handling of RainerScript functions, building the necessary plumbing to support more functions with decent runtime performance. This is also necessary towards the long-term goal of loadable library modules. - added new RainerScript function "tolower" - improved testbench * added tests for tcp-based reception * added tcp-load test (1000 connections, 20,000 messages) - added $MaxOpenFiles configuration directive - bugfix: solved potential memory leak in msg processing, could manifest itself in imtcp - bugfix: ompgsql did not detect problems in sql command execution this could cause loss of messages. The handling was correct if the connection broke, but not if there was a problem with statement execution. The most probable case for such a case would be invalid sql inside the template, and this is now much easier to diagnose. --------------------------------------------------------------------------- Version 4.2.0 [v4-stable] (rgerhards), 2009-06-23 - bugfix: light and full delay watermarks had invalid values, badly affecting performance for delayable inputs - imported all patches from 3.22.1 as of today (see below) - bugfix: compile problems in im3195 --------------------------------------------------------------------------- Version 4.1.7 [BETA] (rgerhards), 2009-04-22 - bugfix: $InputTCPMaxSessions config directive was accepted, but not honored. This resulted in a fixed upper limit of 200 connections. - bugfix: the default for $DirCreateMode was 0644, and as such wrong. It has now been changed to 0700. For some background, please see http://lists.adiscon.net/pipermail/rsyslog/2009-April/001986.html - bugfix: ompgsql did not detect problems in sql command execution this could cause loss of messages. The handling was correct if the connection broke, but not if there was a problem with statement execution. The most probable case for such a case would be invalid sql inside the template, and this is now much easier to diagnose. --------------------------------------------------------------------------- Version 4.1.6 [DEVEL] (rgerhards), 2009-04-07 - added new "csv" property replacer options to enable simple creation of CSV-formatted outputs (format from RFC4180 is used) - implemented function support in RainerScript. That means the engine parses and compile functions, as well as executes a few build-in ones. Dynamic loading and registration of functions is not yet supported - but we now have a good foundation to do that later on. - implemented the strlen() RainerScript function - added a template output module - added -T rsyslogd command line option, enables to specify a directory where to chroot() into on startup. This is NOT a security feature but introduced to support testing. Thus, -T does not make sure chroot() is used in a secure way. (may be removed later) - added omstdout module for testing purposes. Spits out all messages to stdout - no config option, no other features - added a parser testing suite (still needs to be extended, but a good start) - modified $ModLoad statement so that for modules whom's name starts with a dot, no path is prepended (this enables relative-paths and should not break any valid current config) - fixed a bug that caused action retries not to work correctly situation was only cleared by a restart - bugfix: closed dynafile was potentially never written until another dynafile name was generated - potential loss of messages - improved omfile so that it properly suspends itself if there is an i/o or file name generation error. This enables it to be used with the full high availability features of rsyslog's engine - bugfix: fixed some segfaults on Solaris, where vsprintf() does not check for NULL pointers - improved performance of regexp-based filters Thanks to Arnaud Cornet for providing the idea and initial patch. - added a new way how output plugins may be passed parameters. This is more efficient for some outputs. They new can receive fields not only as a single string but rather in an array where each string is separated. - added (some) developer documentation for output plugin interface - bugfix: potential abort with DA queue after high watermark is reached There exists a race condition that can lead to a segfault. Thanks go to vbernetr, who performed the analysis and provided patch, which I only tweaked a very little bit. - bugfix: imtcp did incorrectly parse hostname/tag Thanks to Luis Fernando Muñoz Mejías for the patch. --------------------------------------------------------------------------- Version 4.1.5 [DEVEL] (rgerhards), 2009-03-11 - bugfix: parser did not correctly parse fields in UDP-received messages - added ERE support in filter conditions new comparison operation "ereregex" - added new config directive $RepeatedMsgContainsOriginalMsg so that the "last message repeated n times" messages, if generated, may have an alternate format that contains the message that is being repeated --------------------------------------------------------------------------- Version 4.1.4 [DEVEL] (rgerhards), 2009-01-29 - bugfix: inconsistent use of mutex/atomic operations could cause segfault details are too many, for full analysis see blog post at: http://blog.gerhards.net/2009/01/rsyslog-data-race-analysis.html - bugfix: uninitialized mutex was used in msg.c:getPRI This was subtle, because getPRI is called as part of the debugging code (always executed) in syslogd.c:logmsg. - bugfix: $PreserveFQDN was not properly handled for locally emitted messages --------------------------------------------------------------------------- Version 4.1.3 [DEVEL] (rgerhards), 2008-12-17 - added $InputTCPServerAddtlFrameDelimiter config directive, which enables to specify an additional, non-standard message delimiter for processing plain tcp syslog. This is primarily a fix for the invalid framing used in Juniper's NetScreen products. Credit to forum user Arv for suggesting this solution. - added $InputTCPServerInputName property, which enables a name to be specified that will be available during message processing in the inputname property. This is considered useful for logic that treats messages differently depending on which input received them. - added $PreserveFQDN config file directive Enables to use FQDNs in sender names where the legacy default would have stripped the domain part. Thanks to BlinkMind, Inc. http://www.blinkmind.com for sponsoring this development. - bugfix: imudp went into an endless loop under some circumstances (but could also leave it under some other circumstances...) Thanks to David Lang and speedfox for reporting this issue. --------------------------------------------------------------------------- Version 4.1.2 [DEVEL] (rgerhards), 2008-12-04 - bugfix: code did not compile without zlib - security bugfix: $AllowedSender was not honored, all senders were permitted instead (see https://www.rsyslog.com/Article322.phtml) - security fix: imudp emitted a message when a non-permitted sender tried to send a message to it. This behavior is operator-configurable. If enabled, a message was emitted each time. That way an attacker could effectively fill the disk via this facility. The message is now emitted only once in a minute (this currently is a hard-coded limit, if someone comes up with a good reason to make it configurable, we will probably do that). - doc bugfix: typo in v3 compatibility document directive syntax thanks to Andrej for reporting - imported other changes from 3.21.8 and 3.20.1 (see there) --------------------------------------------------------------------------- Version 4.1.1 [DEVEL] (rgerhards), 2008-11-26 - added $PrivDropToGroup, $PrivDropToUser, $PrivDropToGroupID, $PrivDropToUserID config directives to enable dropping privileges. This is an effort to provide a security enhancement. For the limits of this approach, see http://wiki.rsyslog.com/index.php/Security - re-enabled imklog to compile on FreeBSD (brought in from beta) --------------------------------------------------------------------------- Version 4.1.0 [DEVEL] (rgerhards), 2008-11-18 ********************************* WARNING ********************************* This version has a slightly different on-disk format for message entries. As a consequence, old queue files being read by this version may have an invalid output timestamp, which could result to some malfunction inside the output driver. It is recommended to drain queues with the previous version before switching to this one. ********************************* WARNING ********************************* - greatly enhanced performance when compared to v3. - added configuration directive "HUPisRestart" which enables to configure HUP to be either a full restart or "just" a lightweight way to close open files. - enhanced legacy syslog parser to detect year if part of the timestamp the format is based on what Cisco devices seem to emit. - added a setting "$OptimizeForUniprocessor" to enable users to turn off pthread_yield calls which are counter-productive on multiprocessor machines (but have been shown to be useful on uniprocessors) - reordered imudp processing. Message parsing is now done as part of main message queue worker processing (was part of the input thread) This should also improve performance, as potentially more work is done in parallel. - bugfix: compressed syslog messages could be slightly mis-uncompressed if the last byte of the compressed record was a NUL - added $UDPServerTimeRequery option which enables to work with less accurate timestamps in favor of performance. This enables querying of the time only every n-th time if imudp is running in the tight receive loop (aka receiving messages at a high rate) - doc bugfix: queue doc had wrong parameter name for setting controlling worker thread shutdown period - restructured rsyslog.conf documentation - bugfix: memory leak in ompgsql Thanks to Ken for providing the patch --------------------------------------------------------------------------- Version 3.22.4 [v3-stable] (rgerhards), 2010-??-?? - bugfix: action resume interval incorrectly handled, thus took longer to resume - bugfix: cosmetic: proper constant used instead of number in open call - bugfix: timestamp was incorrectly calculated for timezones with minute offset closes: http://bugzilla.adiscon.com/show_bug.cgi?id=271 - improved some code based on clang static analyzer results - bugfix: potential misaddressing in property replacer - bugfix: improper handling of invalid PRI values references: CVE-2014-3634 --------------------------------------------------------------------------- Version 3.22.3 [v3-stable] (rgerhards), 2010-11-24 - bugfix(important): problem in TLS handling could cause rsyslog to loop in a tight loop, effectively disabling functionality and bearing the risk of unresponsiveness of the whole system. Bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=194 --------------------------------------------------------------------------- Version 3.22.2 [v3-stable] (rgerhards), 2010-08-05 - bugfix: comment char ('#') in literal terminated script parsing and thus could not be used. but tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=119 - enhance: imrelp now also provides remote peer's IP address [if librelp != 1.0.0 is used] - bugfix: sending syslog messages with zip compression did not work - bugfix: potential hang condition on queue shutdown - bugfix: segfault on startup when -q or -Q option was given bug tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=157 Thanks to Jonas Nogueira for reporting this bug. - clarified use of $ActionsSendStreamDriver[AuthMode/PermittedPeers] in doc set (require TLS drivers) - bugfix: $CreateDirs variable not properly initialized, default thus was random (but most often "on") - bugfix: potential segfault when -p command line option was used thanks to varmojfekoj for pointing me at this bug - bugfix: programname filter in ! configuration can not be reset Thanks to Kiss Gabor for the patch. --------------------------------------------------------------------------- Version 3.22.1 [v3-stable] (rgerhards), 2009-07-02 - bugfix: invalid error message issued if $includeConfig was on an empty set of files (e.g. *.conf, where none such files existed) thanks to Michael Biebl for reporting this bug - bugfix: when run in foreground (but not in debug mode), a debug message ("DoDie called") was emitted at shutdown. Removed. thanks to Michael Biebl for reporting this bug - bugfix: some garbage was emitted to stderr on shutdown. This garbage consisted of file names, which were written during startup (key point: not a pointer error) thanks to Michael Biebl for reporting this bug - bugfix: startup and shutdown message were emitted to stdout thanks to Michael Biebl for reporting this bug - bugfix: error messages were not emitted to stderr in forked mode (stderr and stdo are now kept open across forks) - bugfix: internal messages were emitted to whatever file had fd2 when rsyslogd ran in forked mode (as usual!) Thanks to varmojfekoj for the patch - small enhancement: config validation run now exits with code 1 if an error is detected. This change is considered important but small enough to apply it directly to the stable version. [But it is a border case, the change requires more code than I had hoped. Thus I have NOT tried to actually catch all cases, this is left for the current devel releases, if necessary] - bugfix: light and full delay watermarks had invalid values, badly affecting performance for delayable inputs - bugfix: potential segfault issue when multiple $UDPServerRun directives are specified. Thanks to Michael Biebl for helping to debug this one. - relaxed GnuTLS version requirement to 1.4.0 after confirmation from the field that this version is sufficient - bugfix: parser did not properly handle empty structured data - bugfix: invalid mutex release in msg.c (detected under thread debugger, seems not to have any impact on actual deployments) --------------------------------------------------------------------------- Version 3.22.0 [v3-stable] (rgerhards), 2009-04-21 This is the first stable release that includes the full functionality of the 3.21.x version tree. - bugfix: $InputTCPMaxSessions config directive was accepted, but not honored. This resulted in a fixed upper limit of 200 connections. - bugfix: the default for $DirCreateMode was 0644, and as such wrong. It has now been changed to 0700. For some background, please see http://lists.adiscon.net/pipermail/rsyslog/2009-April/001986.html - bugfix: ompgsql did not detect problems in sql command execution this could cause loss of messages. The handling was correct if the connection broke, but not if there was a problem with statement execution. The most probable case for such a case would be invalid sql inside the template, and this is now much easier to diagnose. --------------------------------------------------------------------------- Version 3.21.11 [BETA] (rgerhards), 2009-04-03 - build system improvements contributed by Michael Biebl - thx! - all patches from 3.20.5 incorporated (see it's ChangeLog entry) --------------------------------------------------------------------------- Version 3.21.10 [BETA] (rgerhards), 2009-02-02 - bugfix: inconsistent use of mutex/atomic operations could cause segfault details are too many, for full analysis see blog post at: http://blog.gerhards.net/2009/01/rsyslog-data-race-analysis.html - the string "Do Die" was accidentally emited upon exit in non-debug mode This has now been corrected. Thanks to varmojfekoj for the patch. - some legacy options were not correctly processed. Thanks to varmojfekoj for the patch. - doc bugfix: v3-compatibility document had typo in config directive thanks to Andrej for reporting this --------------------------------------------------------------------------- Version 3.21.9 [BETA] (rgerhards), 2008-12-04 - re-release of 3.21.8 with an additional fix, that could also lead to DoS; 3.21.8 has been removed from the official download archives - security fix: imudp emitted a message when a non-permitted sender tried to send a message to it. This behavior is operator-configurable. If enabled, a message was emitted each time. That way an attacker could effectively fill the disk via this facility. The message is now emitted only once in a minute (this currently is a hard-coded limit, if someone comes up with a good reason to make it configurable, we will probably do that). --------------------------------------------------------------------------- Version 3.21.8 [BETA] (rgerhards), 2008-12-04 - bugfix: imklog did not compile on FreeBSD - security bugfix: $AllowedSender was not honored, all senders were permitted instead (see https://www.rsyslog.com/Article322.phtml) - merged in all other changes from 3.20.1 (see there) --------------------------------------------------------------------------- Version 3.21.7 [BETA] (rgerhards), 2008-11-11 - this is the new beta branch, based on the former 3.21.6 devel - new functionality: ZERO property replacer nomatch option (from v3-stable) --------------------------------------------------------------------------- Version 3.21.6 [DEVEL] (rgerhards), 2008-10-22 - consolidated time calls during msg object creation, improves performance and consistency - bugfix: solved a segfault condition - bugfix: subsecond time properties generated by imfile, imklog and internal messages could be slightly inconsistent - bugfix: (potentially big) memory leak on HUP if queues could not be drained before timeout - thanks to David Lang for pointing this out - added capability to support multiple module search paths. Thank to Marius Tomaschewski for providing the patch. - bugfix: im3195 did no longer compile - improved "make distcheck" by ensuring everything relevant is recompiled --------------------------------------------------------------------------- Version 3.21.5 [DEVEL] (rgerhards), 2008-09-30 - performance optimization: unnecessary time() calls during message parsing removed - thanks to David Lang for his excellent performance analysis - added new capability to property replacer: multiple immediately successive field delimiters are treated as a single one. Thanks to Zhuang Yuyao for the patch. - added message property "inputname", which contains the name of the input (module) that generated it. Presence is depending on support in each input module (else it is blank). - added system property "$myhostname", which contains the name of the local host as it knows itself. - imported a number of fixes and enhancements from the stable and devel branches, including a fix to a potential segfault on HUP when using UDP listeners - re-enabled gcc builtin atomic operations and added a proper ./configure check - bugfix: potential race condition when adding messages to queue There was a wrong order of mutex lock operations. It is hard to believe that really caused problems, but in theory it could and with threading we often see that theory becomes practice if something is only used long enough on a fast enough machine with enough CPUs ;) - cleaned up internal debug system code and made it behave better in regard to multi-threading --------------------------------------------------------------------------- Version 3.21.4 [DEVEL] (rgerhards), 2008-09-04 - removed compile time fixed message size limit (was 2K), limit can now be set via $MaxMessageSize global config directive (finally gotten rid of MAXLINE ;)) - enhanced doc for $ActionExecOnlyEveryNthTimeTimeout - integrated a number of patches from 3.18.4, namely - bugfix: order-of magnitude issue with base-10 size definitions in config file parser. Could lead to invalid sizes, constraints etc for e.g. queue files and any other object whose size was specified in base-10 entities. Did not apply to binary entities. Thanks to RB for finding this bug and providing a patch. - bugfix: action was not called when system time was set backwards (until the previous time was reached again). There are still some side-effects when time is rolled back (A time rollback is really a bad thing to do, ideally the OS should issue pseudo time (like NetWare did) when the user tries to roll back time). Thanks to varmojfekoj for this patch. - doc bugfix: rsyslog.conf man page improved and minor nit fixed thanks to Lukas Kuklinek for the patch. --------------------------------------------------------------------------- Version 3.21.3 [DEVEL] (rgerhards), 2008-08-13 - added ability to specify flow control mode for imuxsock - added ability to execute actions only after the n-th call of the action This also lead to the addition of two new config directives: $ActionExecOnlyEveryNthTime and $ActionExecOnlyEveryNthTimeTimeout This feature is useful, for example, for alerting: it permits you to send an alert only after at least n occurrences of a specific message have been seen by rsyslogd. This protects against false positives due to waiting for additional confirmation. - bugfix: IPv6 addresses could not be specified in forwarding actions New syntax @[addr]:port introduced to enable that. Root problem was IPv6 addresses contain colons. - somewhat enhanced debugging messages - imported from 3.18.3: - enhanced ommysql to support custom port to connect to server Port can be set via new $ActionOmmysqlServerPort config directive Note: this was a very minor change and thus deemed appropriate to be done in the stable release. - bugfix: misspelled config directive, previously was $MainMsgQueueWorkeTimeoutrThreadShutdown, is now $MainMsgQueueWorkerTimeoutThreadShutdown. Note that the misspelled directive is not preserved - if the misspelled directive was used (which I consider highly unlikely), the config file must be changed. Thanks to lperr for reporting the bug. --------------------------------------------------------------------------- Version 3.21.2 [DEVEL] (rgerhards), 2008-08-04 - added $InputUnixListenSocketHostName config directive, which permits to override the hostname being used on a local unix socket. This is useful for differentiating "hosts" running in several jails. Feature was suggested by David Darville, thanks for the suggestion. - enhanced ommail to support multiple email recipients. This is done by specifying $ActionMailTo multiple times. Note that this introduces a small incompatibility to previous config file syntax: the recipient list is now reset for each action (we honestly believe that will not cause any problem - apologies if it does). - enhanced troubleshooting documentation --------------------------------------------------------------------------- Version 3.21.1 [DEVEL] (rgerhards), 2008-07-30 - bugfix: no error was reported if the target of a $IncludeConfig could not be accessed. - added testbed for common config errors - added doc for -u option to rsyslogd man page - enhanced config file checking - no active actions are detected - added -N rsyslogd command line option for a config validation run (which does not execute actual syslogd code and does not interfere with a running instance) - somewhat improved emergency configuration. It is now also selected if the config contains no active actions - rsyslogd error messages are now reported to stderr by default. can be turned off by the new "$ErrorMessagesToStderr off" directive Thanks to HKS for suggesting the new features. --------------------------------------------------------------------------- Version 3.21.0 [DEVEL] (rgerhards), 2008-07-18 - starts a new devel branch - added a generic test driver for RainerScript plus some test cases to the testbench - added a small diagnostic tool to obtain result of gethostname() API - imported all changes from 3.18.1 until today (some quite important, see below) --------------------------------------------------------------------------- Version 3.20.6 [v3-stable] (rgerhards), 2009-04-16 - this is the last v3-stable for the 3.20.x series - bugfix: $InputTCPMaxSessions config directive was accepted, but not honored. This resulted in a fixed upper limit of 200 connections. - bugfix: the default for $DirCreateMode was 0644, and as such wrong. It has now been changed to 0700. For some background, please see http://lists.adiscon.net/pipermail/rsyslog/2009-April/001986.html --------------------------------------------------------------------------- Version 3.20.5 [v3-stable] (rgerhards), 2009-04-02 - bugfix: potential abort with DA queue after high watermark is reached There exists a race condition that can lead to a segfault. Thanks go to vbernetr, who performed the analysis and provided patch, which I only tweaked a very little bit. - fixed bugs in RainerScript: o when converting a number and a string to a common type, both were actually converted to the other variable's type. o the value of rsCStrConvertToNumber() was miscalculated. Thanks to varmojfekoj for the patch - fixed a bug in configure.ac which resulted in problems with environment detection - thanks to Michael Biebl for the patch - fixed a potential segfault problem in gssapi code thanks to varmojfekoj for the patch - doc enhance: provide standard template for MySQL module and instructions on how to modify schema --------------------------------------------------------------------------- Version 3.20.4 [v3-stable] (rgerhards), 2009-02-09 - bugfix: inconsistent use of mutex/atomic operations could cause segfault details are too many, for full analysis see blog post at: http://blog.gerhards.net/2009/01/rsyslog-data-race-analysis.html - bugfix: invalid ./configure settings for RFC3195 thanks to Michael Biebl for the patch - bugfix: invalid mutex access in msg.c - doc bugfix: dist tarball missed 2 files, had one extra file that no longer belongs into it. Thanks to Michael Biebl for pointing this out. --------------------------------------------------------------------------- Version 3.20.3 [v3-stable] (rgerhards), 2009-01-19 - doc bugfix: v3-compatibility document had typo in config directive thanks to Andrej for reporting this - fixed a potential segfault condition with $AllowedSender directive On HUP, the root pointers were not properly cleaned up. Thanks to Michael Biebl, olgoat, and Juha Koho for reporting and analyzing the bug. --------------------------------------------------------------------------- Version 3.20.2 [v3-stable] (rgerhards), 2008-12-04 - re-release of 3.20.1 with an additional fix, that could also lead to DoS; 3.20.1 has been removed from the official download archives - security fix: imudp emitted a message when a non-permitted sender tried to send a message to it. This behavior is operator-configurable. If enabled, a message was emitted each time. That way an attacker could effectively fill the disk via this facility. The message is now emitted only once in a minute (this currently is a hard-coded limit, if someone comes up with a good reason to make it configurable, we will probably do that). --------------------------------------------------------------------------- Version 3.20.1 [v3-stable] (rgerhards), 2008-12-04 - security bugfix: $AllowedSender was not honored, all senders were permitted instead - enhance: regex nomatch option "ZERO" has been added This allows one to return the string 0 if a regular expression is not found. This is probably useful for storing numerical values into database columns. - bugfix: memory leak in gtls netstream driver fixed memory was lost each time a TLS session was torn down. This could result in a considerable memory leak if it happened quite frequently (potential system crash condition) - doc update: documented how to specify multiple property replacer options + link to new online regex generator tool added - minor bugfix: very small memory leak in gtls netstream driver around a handful of bytes (< 20) for each HUP - improved debug output for regular expressions inside property replacer RE's seem to be a big trouble spot and I would like to have more information inside the debug log. So I decided to add some additional debug strings permanently. --------------------------------------------------------------------------- Version 3.20.0 [v3-stable] (rgerhards), 2008-11-05 - this is the initial release of the 3.19.x branch as a stable release - bugfix: double-free in pctp netstream driver. Thank to varmojfekoj for the patch --------------------------------------------------------------------------- Version 3.19.12 [BETA] (rgerhards), 2008-10-16 - bugfix: subseconds where not correctly extracted from a timestamp if that timestamp did not contain any subsecond information (the resulting string was garbage but should have been "0", what it now is). - increased maximum size of a configuration statement to 4K (was 1K) - imported all fixes from the stable branch (quite a lot) - bugfix: (potentially big) memory leak on HUP if queues could not be drained before timeout - thanks to David Lang for pointing this out --------------------------------------------------------------------------- Version 3.19.11 [BETA] (rgerhards), 2008-08-25 This is a refresh of the beta. No beta-specific fixes have been added. - included fixes from v3-stable (most importantly 3.18.3) --------------------------------------------------------------------------- Version 3.19.10 [BETA] (rgerhards), 2008-07-15 - start of a new beta branch based on former 3.19 devel branch - bugfix: bad memory leak in disk-based queue modes - bugfix: UDP syslog forwarding did not work on all platforms the ai_socktype was incorrectly set to 1. On some platforms, this lead to failing name resolution (e.g. FreeBSD 7). Thanks to HKS for reporting the bug. - bugfix: priority was incorrectly calculated on FreeBSD 7, because the LOG_MAKEPRI() C macro has a different meaning there (it is just a simple addition of facility and severity). I have changed this to use own, consistent, code for PRI calculation. Thank to HKS for reporting this bug. - bugfix (cosmetical): authorization was not checked when gtls handshake completed immediately. While this sounds scary, the situation can not happen in practice. We use non-blocking IO only for server-based gtls session setup. As TLS requires the exchange of multiple frames before the handshake completes, it simply is impossible to do this in one step. However, it is useful to have the code path correct even for this case - otherwise, we may run into problems if the code is changed some time later (e.g. to use blocking sockets). Thanks to varmojfekoj for providing the patch. - important queue bugfix from 3.18.1 imported (see below) - cleanup of some debug messages --------------------------------------------------------------------------- Version 3.19.9 (rgerhards), 2008-07-07 - added tutorial for creating a TLS-secured syslog infrastructure - rewritten omusrmsg to no longer fork() a new process for sending messages this caused some problems with the threading model, e.g. zombies. Also, it was far less optimal than it is now. - bugfix: machine certificate was required for client even in TLS anon mode Reference: http://bugzilla.adiscon.com/show_bug.cgi?id=85 The fix also slightly improves performance by not storing certificates in client sessions when there is no need to do so. - bugfix: RainerScript syntax error was not always detected --------------------------------------------------------------------------- Version 3.19.8 (rgerhards), 2008-07-01 - bugfix: gtls module did not correctly handle EGAIN (and similar) recv() states. This has been fixed by introducing a new abstraction layer inside gtls. - added (internal) error codes to error messages; added redirector to web description of error codes closes bug http://bugzilla.adiscon.com/show_bug.cgi?id=20 - disabled compile warnings caused by third-party libraries - reduced number of compile warnings in gcc's -pedantic mode - some minor documentation improvements - included all fixes from beta 3.17.5 --------------------------------------------------------------------------- Version 3.19.7 (rgerhards), 2008-06-11 - added new property replacer option "date-subseconds" that enables to query just the subsecond part of a high-precision timestamp - somewhat improved plain tcp syslog reliability by doing a connection check before sending. Credits to Martin Schuette for providing the idea. Details are available at http://blog.gerhards.net/2008/06/reliable-plain-tcp-syslog-once-again.html - made rsyslog tickless in the (usual and default) case that repeated message reduction is turned off. More info: http://blog.gerhards.net/2008/06/coding-to-save-environment.html - some build system cleanup, thanks to Michael Biebl - bugfix: compile under (Free)BSD failed due to some invalid library definitions - this is fixed now. Thanks to Michael Biebl for the patch. --------------------------------------------------------------------------- Version 3.19.6 (rgerhards), 2008-06-06 - enhanced property replacer to support multiple regex matches - bugfix: part of permittedPeer structure was not correctly initialized thanks to varmojfekoj for spotting this - bugfix: off-by-one bug during certificate check - bugfix: removed some memory leaks in TLS code --------------------------------------------------------------------------- Version 3.19.5 (rgerhards), 2008-05-30 - enabled Posix ERE expressions inside the property replacer (previously BRE was permitted only) - provided ability to specify that a regular expression submatch shall be used inside the property replacer - implemented in property replacer: if a regular expression does not match, it can now either return "**NO MATCH** (default, as before), a blank property or the full original property text - enhanced property replacer to support multiple regex matches --------------------------------------------------------------------------- Version 3.19.4 (rgerhards), 2008-05-27 - implemented x509/certvalid gtls auth mode - implemented x509/name gtls auth mode (including wildcards) - changed fingerprint gtls auth mode to new format fingerprint - protected gtls error string function by a mutex. Without it, we could have a race condition in extreme cases. This was very remote, but now can no longer happen. - changed config directive name to reflect different use $ActionSendStreamDriverCertFingerprint is now $ActionSendStreamDriverPermittedPeer and can be used both for fingerprint and name authentication (similar to the input side) - bugfix: sender information (fromhost et al) was missing in imudp thanks to sandiso for reporting this bug - this release fully implements IETF's syslog-transport-tls-12 plus the latest text changes Joe Salowey provided via email. Not included is ipAddress subjectAltName authentication, which I think will be dropped from the draft. I don't think there is any real need for it. This release also includes all bug fix up to today from the beta and stable branches. Most importantly, this means the bugfix for 100% CPU utilization by imklog. --------------------------------------------------------------------------- Version 3.19.3 (rgerhards), 2008-05-21 - added ability to authenticate the server against its certificate fingerprint - added ability for client to provide its fingerprint - added ability for server to obtain client cert's fingerprint - bugfix: small mem leak in omfwd on exit (strmdriver name was not freed) - bugfix: $ActionSendStreamDriver had no effect - bugfix: default syslog port was no longer used if none was configured. Thanks to varmojfekoj for the patch - bugfix: missing linker options caused build to fail on some systems. Thanks to Tiziano Mueller for the patch. --------------------------------------------------------------------------- Version 3.19.2 (rgerhards), 2008-05-16 - bugfix: TCP input modules did incorrectly set fromhost property (always blank) - bugfix: imklog did not set fromhost property - added "fromhost-ip" property Note that adding this property changes the on-disk format for messages. However, that should not have any bad effect on existing spool files. But you will run into trouble if you create a spool file with this version and then try to process it with an older one (after a downgrade). Don't do that ;) - added "RSYSLOG_DebugFormat" canned template - bugfix: hostname and fromhost were swapped when a persisted message (in queued mode) was read in - bugfix: lmtcpclt, lmtcpsrv and lmgssutil did all link to the static runtime library, resulting in a large size increase (and potential "interesting" effects). Thanks to Michael Biebl for reporting the size issue. - bugfix: TLS server went into an endless loop in some situations. Thanks to Michael Biebl for reporting the problem. - fixed potential segfault due to invalid call to cfsysline thanks to varmojfekoj for the patch --------------------------------------------------------------------------- Version 3.19.1 (rgerhards), 2008-05-07 - configure help for --enable-gnutls wrong - said default is "yes" but default actually is "no" - thanks to darix for pointing this out - file dirty.h was missing - thanks to darix for pointing this out - bugfix: man files were not properly distributed - thanks to darix for reporting and to Michael Biebl for help with the fix - some minor cleanup --------------------------------------------------------------------------- Version 3.19.0 (rgerhards), 2008-05-06 - begins new devel branch version - implemented TLS for plain tcp syslog (this is also the world's first implementation of IETF's upcoming syslog-transport-tls draft) - partly rewritten and improved omfwd among others, now loads TCP code only if this is actually necessary - split of a "runtime library" for rsyslog - this is not yet a clean model, because some modularization is still outstanding. In theory, this shall enable other utilities but rsyslogd to use the same runtime - implemented im3195, the RFC3195 input as a plugin - changed directory structure, files are now better organized - a lot of cleanup in regard to modularization - -c option no longer must be the first option - thanks to varmojfekoj for the patch --------------------------------------------------------------------------- Version 3.18.7 (rgerhards), 2008-12-?? - bugfix: the default for $DirCreateMode was 0644, and as such wrong. It has now been changed to 0700. For some background, please see http://lists.adiscon.net/pipermail/rsyslog/2009-April/001986.html - fixed a potential segfault condition with $AllowedSender directive On HUP, the root pointers were not properly cleaned up. Thanks to Michael Biebl, olgoat, and Juha Koho for reporting and analyzing the bug. - some legacy options were not correctly processed. Thanks to varmojfekoj for the patch. - doc bugfix: some spelling errors in man pages corrected. Thanks to Geoff Simmons for the patch. --------------------------------------------------------------------------- Version 3.18.6 (rgerhards), 2008-12-08 - security bugfix: $AllowedSender was not honored, all senders were permitted instead (see https://www.rsyslog.com/Article322.phtml) (backport from v3-stable, v3.20.9) - minor bugfix: dual close() call on tcp session closure --------------------------------------------------------------------------- Version 3.18.5 (rgerhards), 2008-10-09 - bugfix: imudp input module could cause segfault on HUP It did not properly de-init a variable acting as a linked list head. That resulted in trying to access freed memory blocks after the HUP. - bugfix: rsyslogd could hang on HUP because getnameinfo() is not cancel-safe, but was not guarded against being cancelled. pthread_cancel() is routinely being called during HUP processing. - bugfix[minor]: if queue size reached light_delay mark, enqueuing could potentially be blocked for a longer period of time, which was not the behavior desired. - doc bugfix: $ActionExecOnlyWhenPreviousIsSuspended was still misspelled as $...OnlyIfPrev... in some parts of the documentation. Thanks to Lorenzo M. Catucci for reporting this bug. - added doc on malformed messages, cause and how to work-around, to the doc set - added doc on how to build from source repository --------------------------------------------------------------------------- Version 3.18.4 (rgerhards), 2008-09-18 - bugfix: order-of magnitude issue with base-10 size definitions in config file parser. Could lead to invalid sizes, constraints etc for e.g. queue files and any other object whose size was specified in base-10 entities. Did not apply to binary entities. Thanks to RB for finding this bug and providing a patch. - bugfix: action was not called when system time was set backwards (until the previous time was reached again). There are still some side-effects when time is rolled back (A time rollback is really a bad thing to do, ideally the OS should issue pseudo time (like NetWare did) when the user tries to roll back time). Thanks to varmojfekoj for this patch. - doc bugfix: rsyslog.conf man page improved and minor nit fixed thanks to Lukas Kuklinek for the patch. - bugfix: error code -2025 was used for two different errors. queue full is now -2074 and -2025 is unique again. (did cause no real problem except for troubleshooting) - bugfix: default discard severity was incorrectly set to 4, which lead to discard-on-queue-full to be enabled by default. That could cause message loss where non was expected. The default has now been changed to the correct value of 8, which disables the functionality. This problem applied both to the main message queue and the action queues. Thanks to Raoul Bhatia for pointing out this problem. - bugfix: option value for legacy -a option could not be specified, resulting in strange operations. Thanks to Marius Tomaschewski for the patch. - bugfix: colon after date should be ignored, but was not. This has now been corrected. Required change to the internal ParseTIMESTAMP3164() interface. --------------------------------------------------------------------------- Version 3.18.3 (rgerhards), 2008-08-18 - bugfix: imfile could cause a segfault upon rsyslogd HUP and termination Thanks to lperr for an excellent bug report that helped detect this problem. - enhanced ommysql to support custom port to connect to server Port can be set via new $ActionOmmysqlServerPort config directive Note: this was a very minor change and thus deemed appropriate to be done in the stable release. - bugfix: misspelled config directive, previously was $MainMsgQueueWorkeTimeoutrThreadShutdown, is now $MainMsgQueueWorkerTimeoutThreadShutdown. Note that the misspelled directive is not preserved - if the misspelled directive was used (which I consider highly unlikely), the config file must be changed. Thanks to lperr for reporting the bug. - disabled flow control for imuxsock, as it could cause system hangs under some circumstances. The devel (3.21.3 and above) will re-enable it and provide enhanced configurability to overcome the problems if they occur. --------------------------------------------------------------------------- Version 3.18.2 (rgerhards), 2008-08-08 - merged in IPv6 forwarding address bugfix from v2-stable --------------------------------------------------------------------------- Version 3.18.1 (rgerhards), 2008-07-21 - bugfix: potential segfault in creating message mutex in non-direct queue mode. rsyslogd segfaults on freeBSD 7.0 (an potentially other platforms) if an action queue is running in any other mode than non-direct. The same problem can potentially be triggered by some main message queue settings. In any case, it will manifest during rsyslog's startup. It is unlikely to happen after a successful startup (the only window of exposure may be a relatively seldom executed action running in queued mode). This has been corrected. Thank to HKS for point out the problem. - bugfix: priority was incorrectly calculated on FreeBSD 7, because the LOG_MAKEPRI() C macro has a different meaning there (it is just a simple addition of facility and severity). I have changed this to use own, consistent, code for PRI calculation. [Backport from 3.19.10] - bugfix: remove PRI part from kernel message if it is present Thanks to Michael Biebl for reporting this bug - bugfix: mark messages were not correctly written to text log files the markmessageinterval was not correctly propagated to all places where it was needed. This resulted in rsyslog using the default (20 minutes) in some code paths, what looked to the user like mark messages were never written. - added a new property replacer option "sp-if-no-1st-sp" to cover a problem with RFC 3164 based interpretation of tag separation. While it is a generic approach, it fixes a format problem introduced in 3.18.0, where kernel messages no longer had a space after the tag. This is done by a modification of the default templates. Please note that this may affect some messages where there intentionally is no space between the tag and the first character of the message content. If so, this needs to be worked around via a specific template. However, we consider this scenario to be quite remote and, even if it exists, it is not expected that it will actually cause problems with log parsers (instead, we assume the new default template behavior may fix previous problems with log parsers due to the missing space). - bugfix: imklog module was not correctly compiled for GNU/kFreeBSD. Thanks to Petr Salinger for the patch - doc bugfix: property replacer options secpath-replace and secpath-drop were not documented - doc bugfix: fixed some typos in rsyslog.conf man page - fixed typo in source comment - thanks to Rio Fujita - some general cleanup (thanks to Michael Biebl) --------------------------------------------------------------------------- Version 3.18.0 (rgerhards), 2008-07-11 - begun a new v3-stable based on former 3.17.4 beta plus patches to previous v3-stable - bugfix in RainerScript: syntax error was not always detected --------------------------------------------------------------------------- Version 3.17.5 (rgerhards), 2008-06-27 - added doc: howto set up a reliable connection to remote server via queued mode (and plain tcp protocol) - bugfix: comments after actions were not properly treated. For some actions (e.g. forwarding), this could also lead to invalid configuration --------------------------------------------------------------------------- Version 3.17.4 (rgerhards), 2008-06-16 - changed default for $KlogSymbolLookup to "off". The directive is also scheduled for removal in a later version. This was necessary because on kernels >= 2.6, the kernel does the symbol lookup itself. The imklog lookup logic then breaks the log message and makes it unusable. --------------------------------------------------------------------------- Version 3.17.3 (rgerhards), 2008-05-28 - bugfix: imklog went into an endless loop if a PRI value was inside a kernel log message (unusual case under Linux, frequent under BSD) --------------------------------------------------------------------------- Version 3.17.2 (rgerhards), 2008-05-04 - this version is the new beta, based on 3.17.1 devel feature set - merged in imklog bug fix from v3-stable (3.16.1) --------------------------------------------------------------------------- Version 3.17.1 (rgerhards), 2008-04-15 - removed dependency on MAXHOSTNAMELEN as much as it made sense. GNU/Hurd does not define it (because it has no limit), and we have taken care for cases where it is undefined now. However, some very few places remain where IMHO it currently is not worth fixing the code. If it is not defined, we have used a generous value of 1K, which is above IETF RFC's on hostname length at all. The memory consumption is no issue, as there are only a handful of this buffers allocated *per run* -- that's also the main reason why we consider it not worth to be fixed any further. - enhanced legacy syslog parser to handle slightly malformed messages (with a space in front of the timestamp) - at least HP procurve is known to do that and I won't outrule that others also do it. The change looks quite unintrusive and so we added it to the parser. - implemented klogd functionality for BSD - implemented high precision timestamps for the kernel log. Thanks to Michael Biebl for pointing out that the kernel log did not have them. - provided ability to discard non-kernel messages if they are present in the kernel log (seems to happen on BSD) - implemented $KLogInternalMsgFacility config directive - implemented $KLogPermitNonKernelFacility config directive Plus a number of bugfixes that were applied to v3-stable and beta branches (not mentioned here in detail). --------------------------------------------------------------------------- Version 3.17.0 (rgerhards), 2008-04-08 - added native ability to send mail messages - removed no longer needed file relputil.c/.h - added $ActionExecOnlyOnceEveryInterval config directive - bugfix: memory leaks in script engine - bugfix: zero-length strings were not supported in object deserializer - properties are now case-insensitive everywhere (script, filters, templates) - added the capability to specify a processing (actually dequeue) timeframe with queues - so things can be configured to be done at off-peak hours - We have removed the 32 character size limit (from RFC3164) on the tag. This had bad effects on existing environments, as sysklogd didn't obey it either (probably another bug in RFC3164...). We now receive the full size, but will modify the outputs so that only 32 characters max are used by default. If you need large tags in the output, you need to provide custom templates. - changed command line processing. -v, -M, -c options are now parsed and processed before all other options. Inter-option dependencies have been relieved. Among others, permits to specify initial module load path via -M only (not the environment) which makes it much easier to work with non-standard module library locations. Thanks to varmojfekoj for suggesting this change. Matches bugzilla bug 55. - bugfix: some messages were emited without hostname Plus a number of bugfixes that were applied to v3-stable and beta branches (not mentioned here in detail). --------------------------------------------------------------------------- Version 3.16.3 (rgerhards), 2008-07-11 - updated information on rsyslog packages - bugfix: memory leak in disk-based queue modes --------------------------------------------------------------------------- Version 3.16.2 (rgerhards), 2008-06-25 - fixed potential segfault due to invalid call to cfsysline thanks to varmojfekoj for the patch - bugfix: some whitespaces where incorrectly not ignored when parsing the config file. This is now corrected. Thanks to Michael Biebl for pointing out the problem. --------------------------------------------------------------------------- Version 3.16.1 (rgerhards), 2008-05-02 - fixed a bug in imklog which lead to startup problems (including segfault) on some platforms under some circumstances. Thanks to Vieri for reporting this bug and helping to troubleshoot it. --------------------------------------------------------------------------- Version 3.16.0 (rgerhards), 2008-04-24 - new v3-stable (3.16.x) based on beta 3.15.x (RELP support) - bugfix: omsnmp had a too-small sized buffer for hostname+port. This could not lead to a segfault, as snprintf() was used, but could cause some trouble with extensively long hostnames. - applied patch from Tiziano Müller to remove some compiler warnings - added gssapi overview/howto thanks to Peter Vrabec - changed some files to grant LGPLv3 extended permissions on top of GPLv3 this also is the first sign of something that will evolve into a well-defined "rsyslog runtime library" --------------------------------------------------------------------------- Version 3.15.1 (rgerhards), 2008-04-11 - bugfix: some messages were emited without hostname - disabled atomic operations for the time being because they introduce some cross-platform trouble - need to see how to fix this in the best possible way - bugfix: zero-length strings were not supported in object deserializer - added librelp check via PKG_CHECK thanks to Michael Biebl's patch - file relputil.c deleted, is not actually needed - added more meaningful error messages to rsyslogd (when some errors happens during startup) - bugfix: memory leaks in script engine - bugfix: $hostname and $fromhost in RainerScript did not work This release also includes all changes applied to the stable versions up to today. --------------------------------------------------------------------------- Version 3.15.0 (rgerhards), 2008-04-01 - major new feature: imrelp/omrelp support reliable delivery of syslog messages via the RELP protocol and librelp (http://www.librelp.com). Plain tcp syslog, so far the best reliability solution, can lose messages when something goes wrong or a peer goes down. With RELP, this can no longer happen. See imrelp.html for more details. - bugfix: rsyslogd was no longer build by default; man pages are only installed if corresponding option is selected. Thanks to Michael Biebl for pointing these problems out. --------------------------------------------------------------------------- Version 3.14.2 (rgerhards), 2008-04-09 - bugfix: segfault with expression-based filters - bugfix: omsnmp did not deref errmsg object on exit (no bad effects caused) - some cleanup - bugfix: imklog did not work well with kernel 2.6+. Thanks to Peter Vrabec for patching it based on the development in sysklogd - and thanks to the sysklogd project for upgrading klogd to support the new functionality - some cleanup in imklog - bugfix: potential segfault in imklog when kernel is compiled without /proc/kallsyms and the file System.map is missing. Thanks to Andrea Morandi for pointing it out and suggesting a fix. - bugfixes, credits to varmojfekoj: * reset errno before printing a warning message * misspelled directive name in code processing legacy options - bugfix: some legacy options not correctly interpreted - thanks to varmojfekoj for the patch - improved detection of modules being loaded more than once thanks to varmojfekoj for the patch --------------------------------------------------------------------------- Version 3.14.1 (rgerhards), 2008-04-04 - bugfix: some messages were emited without hostname - bugfix: rsyslogd was no longer build by default; man pages are only installed if corresponding option is selected. Thanks to Michael Biebl for pointing these problems out. - bugfix: zero-length strings were not supported in object deserializer - disabled atomic operations for this stable build as it caused platform problems - bugfix: memory leaks in script engine - bugfix: $hostname and $fromhost in RainerScript did not work - bugfix: some memory leak when queue is running in disk mode - man pages improved thanks to varmojfekoj and Peter Vrabec - We have removed the 32 character size limit (from RFC3164) on the tag. This had bad effects on existing environments, as sysklogd didn't obey it either (probably another bug in RFC3164...). We now receive the full size, but will modify the outputs so that only 32 characters max are used by default. If you need large tags in the output, you need to provide custom templates. - bugfix: some memory leak when queue is running in disk mode --------------------------------------------------------------------------- Version 3.14.0 (rgerhards), 2008-04-02 An interim version was accidentally released to the web. It was named 3.14.0. To avoid confusion, we have not assigned this version number to any official release. If you happen to use 3.14.0, please update to 3.14.1. --------------------------------------------------------------------------- Version 3.13.0-dev0 (rgerhards), 2008-03-31 - bugfix: accidentally set debug option in 3.12.5 reset to production This option prevented dlclose() to be called. It had no real bad effects, as the modules were otherwise correctly deinitialized and dlopen() supports multiple opens of the same module without any memory footprint. - removed --enable-mudflap, added --enable-valgrind ./configure setting - bugfix: tcp receiver could segfault due to uninitialized variable - docfix: queue doc had a wrong directive name that prevented max worker threads to be correctly set - worked a bit on atomic memory operations to support problem-free threading (only at non-intrusive places) - added a --enable/disable-rsyslogd configure option so that source-based packaging systems can build plugins without the need to compile rsyslogd - some cleanup - test of potential new version number scheme --------------------------------------------------------------------------- Version 3.12.5 (rgerhards), 2008-03-28 - changed default for "last message repeated n times", which is now off by default - implemented backward compatibility commandline option parsing - automatically generated compatibility config lines are now also logged so that a user can diagnose problems with them - added compatibility mode for -a, -o and -p options - compatibility mode processing finished - changed default file output format to include high-precision timestamps - added a built-in template for previous syslogd file format - added new $ActionFileDefaultTemplate directive - added support for high-precision timestamps when receiving legacy syslog messages - added new $ActionForwardDefaultTemplate directive - added new $ActionGSSForwardDefaultTemplate directive - added build-in templates for easier configuration - bugfix: fixed small memory leak in tcpclt.c - bugfix: fixed small memory leak in template regular expressions - bugfix: regular expressions inside property replacer did not work properly - bugfix: QHOUR and HHOUR properties were wrongly calculated - bugfix: fixed memory leaks in stream class and imfile - bugfix: $ModDir did invalid bounds checking, potential overflow in dbgprintf() - thanks to varmojfekoj for the patch - bugfix: -t and -g legacy options max number of sessions had a wrong and much too high value --------------------------------------------------------------------------- Version 3.12.4 (rgerhards), 2008-03-25 - Greatly enhanced rsyslogd's file write performance by disabling file syncing capability of output modules by default. This feature is usually not required, not useful and an extreme performance hit (both to rsyslogd as well as the system at large). Unfortunately, most users enable it by default, because it was most intuitive to enable it in plain old sysklogd syslog.conf format. There is now the $ActionFileEnableSync config setting which must be enabled in order to support syncing. By default it is off. So even if the old-format config lines request syncing, it is not done unless explicitly enabled. I am sure this is a very useful change and not a risk at all. I need to think if I undo it under compatibility mode, but currently this does not happen (I fear a lot of lazy users will run rsyslogd in compatibility mode, again bringing up this performance problem...). - added flow control options to other input sources - added $HHOUR and $QHOUR system properties - can be used for half- and quarter-hour logfile rotation - changed queue's discard severities default value to 8 (do not discard) to prevent unintentional message loss - removed a no-longer needed callback from the output module interface. Results in reduced code complexity. - bugfix/doc: removed no longer supported -h option from man page - bugfix: imklog leaked several hundred KB on each HUP. Thanks to varmojfekoj for the patch - bugfix: potential segfault on module unload. Thanks to varmojfekoj for the patch - bugfix: fixed some minor memory leaks - bugfix: fixed some slightly invalid memory accesses - bugfix: internally generated messages had "FROMHOST" property not set --------------------------------------------------------------------------- Version 3.12.3 (rgerhards), 2008-03-18 - added advanced flow control for congestion cases (mode depending on message source and its capability to be delayed without bad side effects) - bugfix: $ModDir should not be reset on $ResetConfig - this can cause a lot of confusion and there is no real good reason to do so. Also conflicts with the new -M option and environment setting. - bugfix: TCP and GSSAPI framing mode variable was uninitialized, leading to wrong framing (caused, among others, interop problems) - bugfix: TCP (and GSSAPI) octet-counted frame did not work correctly in all situations. If the header was split across two packet reads, it was invalidly processed, causing loss or modification of messages. - bugfix: memory leak in imfile - bugfix: duplicate public symbol in omfwd and omgssapi could lead to segfault. thanks to varmojfekoj for the patch. - bugfix: rsyslogd aborted on sighup - thanks to varmojfekoj for the patch - some more internal cleanup ;) - begun relp modules, but these are not functional yet - Greatly enhanced rsyslogd's file write performance by disabling file syncing capability of output modules by default. This feature is usually not required, not useful and an extreme performance hit (both to rsyslogd as well as the system at large). Unfortunately, most users enable it by default, because it was most intuitive to enable it in plain old sysklogd syslog.conf format. There is now a new config setting which must be enabled in order to support syncing. By default it is off. So even if the old-format config lines request syncing, it is not done unless explicitly enabled. I am sure this is a very useful change and not a risk at all. I need to think if I undo it under compatibility mode, but currently this does not happen (I fear a lot of lazy users will run rsyslogd in compatibility mode, again bringing up this performance problem...). --------------------------------------------------------------------------- Version 3.12.2 (rgerhards), 2008-03-13 - added RSYSLOGD_MODDIR environment variable - added -M rsyslogd option (allows one to specify module directory location) - converted net.c into a loadable library plugin - bugfix: debug module now survives unload of loadable module when printing out function call data - bugfix: not properly initialized data could cause several segfaults if there were errors in the config file - thanks to varmojfekoj for the patch - bugfix: rsyslogd segfaulted when imfile read an empty line - thanks to Johnny Tan for an excellent bug report - implemented dynamic module unload capability (not visible to end user) - some more internal cleanup - bugfix: imgssapi segfaulted under some conditions; this fix is actually not just a fix but a change in the object model. Thanks to varmojfekoj for providing the bug report, an initial fix and lots of good discussion that lead to where we finally ended up. - improved session recovery when outbound tcp connection breaks, reduces probability of message loss at the price of a highly unlikely potential (single) message duplication --------------------------------------------------------------------------- Version 3.12.1 (rgerhards), 2008-03-06 - added library plugins, which can be automatically loaded - bugfix: actions were not correctly retried; caused message loss - changed module loader to automatically add ".so" suffix if not specified (over time, this shall also ease portability of config files) - improved debugging support; debug runtime options can now be set via an environment variable - bugfix: removed debugging code that I forgot to remove before releasing 3.12.0 (does not cause harm and happened only during startup) - added support for the MonitorWare syslog MIB to omsnmp - internal code improvements (more code converted into classes) - internal code reworking of the imtcp/imgssapi module - added capability to ignore client-provided timestamp on unix sockets and made this mode the default; this was needed, as some programs (e.g. sshd) log with inconsistent timezone information, what messes up the local logs (which by default don't even contain time zone information). This seems to be consistent with what sysklogd did for the past four years. Alternate behavior may be desirable if gateway-like processes send messages via the local log slot - in this case, it can be enabled via the $InputUnixListenSocketIgnoreMsgTimestamp and $SystemLogSocketIgnoreMsgTimestamp config directives - added ability to compile on HP UX; verified that imudp worked on HP UX; however, we are still in need of people trying out rsyslogd on HP UX, so it can not yet be assumed it runs there - improved session recovery when outbound tcp connection breaks, reduces probability of message loss at the price of a highly unlikely potential (single) message duplication --------------------------------------------------------------------------- Version 3.12.0 (rgerhards), 2008-02-28 - added full expression support for filters; filters can now contain arbitrary complex boolean, string and arithmetic expressions --------------------------------------------------------------------------- Version 3.11.6 (rgerhards), 2008-02-27 - bugfix: gssapi libraries were still linked to rsyslog core, what should no longer be necessary. Applied fix by Michael Biebl to solve this. - enabled imgssapi to be loaded side-by-side with imtcp - added InputGSSServerPermitPlainTCP config directive - split imgssapi source code somewhat from imtcp - bugfix: queue cancel cleanup handler could be called with invalid pointer if dequeue failed - bugfix: rsyslogd segfaulted on second SIGHUP tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=38 - improved stability of queue engine - bugfix: queue disk file were not properly persisted when immediately after closing an output file rsyslog was stopped or huped (the new output file open must NOT have happened at that point) - this lead to a sparse and invalid queue file which could cause several problems to the engine (unpredictable results). This situation should have happened only in very rare cases. tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=40 - bugfix: during queue shutdown, an assert invalidly triggered when the primary queue's DA worker was terminated while the DA queue's regular worker was still executing. This could result in a segfault during shutdown. tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=41 - bugfix: queue properties sizeOnDisk, bytesRead were persisted to disk with wrong data type (long instead of int64) - could cause problems on 32 bit machines - bugfix: queue aborted when it was shut down, DA-enabled, DA mode was just initiated but not fully initialized (a race condition) - bugfix: imfile could abort under extreme stress conditions (when it was terminated before it could open all of its to be monitored files) - applied patch from varmojfekoj to fix an issue with compatibility mode and default module directories (many thanks!): I've also noticed a bug in the compatibility code; the problem is that options are parsed before configuration file so options which need a module to be loaded will currently ignore any $moddir directive. This can be fixed by moving legacyOptsHook() after config file parsing. (see the attached patch) This goes against the logical order of processing, but the legacy options are only few and it doesn't seem to be a problem. - bugfix: object property deserializer did not handle negative numbers --------------------------------------------------------------------------- Version 3.11.5 (rgerhards), 2008-02-25 - new imgssapi module, changed imtcp module - this enables to load/package GSSAPI support separately - thanks to varmojfekoj for the patch - compatibility mode (the -c option series) is now at least partly completed - thanks to varmojfekoj for the patch - documentation for imgssapi and imtcp added - duplicate $ModLoad's for the same module are now detected and rejected -- thanks to varmojfekoj for the patch --------------------------------------------------------------------------- Version 3.11.4 (rgerhards), 2008-02-21 - bugfix: debug.html was missing from release tarball - thanks to Michael Biebl for bringing this to my attention - some internal cleanup on the stringbuf object calling interface - general code cleanup and further modularization - $MainMessageQueueDiscardSeverity can now also handle textual severities (previously only integers) - bugfix: message object was not properly synchronized when the main queue had a single thread and non-direct action queues were used - some documentation improvements --------------------------------------------------------------------------- Version 3.11.3 (rgerhards), 2008-02-18 - fixed a bug in imklog which lead to duplicate message content in kernel logs - added support for better plugin handling in libdbi (we contributed a patch to do that, we just now need to wait for the next libdbi version) - bugfix: fixed abort when invalid template was provided to an action bug http://bugzilla.adiscon.com/show_bug.cgi?id=4 - re-instantiated SIGUSR1 function; added SIGUSR2 to generate debug status output - added some documentation on runtime-debug settings - slightly improved man pages for novice users --------------------------------------------------------------------------- Version 3.11.2 (rgerhards), 2008-02-15 - added the capability to monitor text files and process their content as syslog messages (including forwarding) - added support for libdbi, a database abstraction layer. rsyslog now also supports the following databases via dbi drivers: * Firebird/Interbase * FreeTDS (access to MS SQL Server and Sybase) * SQLite/SQLite3 * Ingres (experimental) * mSQL (experimental) * Oracle (experimental) Additional drivers may be provided by the libdbi-drivers project, which can be used by rsyslog as soon as they become available. - removed some left-over unnecessary dbgprintf's (cluttered screen, cosmetic) - doc bugfix: html documentation for omsnmp was missing --------------------------------------------------------------------------- Version 3.11.1 (rgerhards), 2008-02-12 - SNMP trap sender added thanks to Andre Lorbach (omsnmp) - added input-plugin interface specification in form of a (copy) template input module - applied documentation fix by Michael Biebl -- many thanks! - bugfix: immark did not have MARK flags set... - added x-info field to rsyslogd startup/shutdown message. Hopefully points users to right location for further info (many don't even know they run rsyslog ;)) - bugfix: trailing ":" of tag was lost while parsing legacy syslog messages without timestamp - thanks to Anders Blomdell for providing a patch! - fixed a bug in stringbuf.c related to STRINGBUF_TRIM_ALLOCSIZE, which wasn't supposed to be used with rsyslog. Put a warning message up that tells this feature is not tested and probably not worth the effort. Thanks to Anders Blomdell fro bringing this to our attention - somewhat improved performance of string buffers - fixed bug that caused invalid treatment of tabs (HT) in rsyslog.conf - bugfix: setting for $EscapeControlCharactersOnReceive was not properly initialized - clarified usage of space-cc property replacer option - improved abort diagnostic handler - some initial effort for malloc/free runtime debugging support - bugfix: using dynafile actions caused rsyslogd abort - fixed minor man errors thanks to Michael Biebl --------------------------------------------------------------------------- Version 3.11.0 (rgerhards), 2008-01-31 - implemented queued actions - implemented simple rate limiting for actions - implemented deliberate discarding of lower priority messages over higher priority ones when a queue runs out of space - implemented disk quotas for disk queues - implemented the $ActionResumeRetryCount config directive - added $ActionQueueFilename config directive - added $ActionQueueSize config directive - added $ActionQueueHighWaterMark config directive - added $ActionQueueLowWaterMark config directive - added $ActionQueueDiscardMark config directive - added $ActionQueueDiscardSeverity config directive - added $ActionQueueCheckpointInterval config directive - added $ActionQueueType config directive - added $ActionQueueWorkerThreads config directive - added $ActionQueueTimeoutshutdown config directive - added $ActionQueueTimeoutActionCompletion config directive - added $ActionQueueTimeoutenQueue config directive - added $ActionQueueTimeoutworkerThreadShutdown config directive - added $ActionQueueWorkerThreadMinimumMessages config directive - added $ActionQueueMaxFileSize config directive - added $ActionQueueSaveonShutdown config directive - addded $ActionQueueDequeueSlowdown config directive - addded $MainMsgQueueDequeueSlowdown config directive - bugfix: added forgotten docs to package - improved debugging support - fixed a bug that caused $MainMsgQueueCheckpointInterval to work incorrectly - when a long-running action needs to be cancelled on shutdown, the message that was processed by it is now preserved. This finishes support for guaranteed delivery of messages (if the output supports it, of course) - fixed bug in output module interface, see http://sourceforge.net/tracker/index.php?func=detail&aid=1881008&group_id=123448&atid=696552 - changed the ommysql output plugin so that the (lengthy) connection initialization now takes place in message processing. This works much better with the new queued action mode (fast startup) - fixed a bug that caused a potential hang in file and fwd output module varmojfekoj provided the patch - many thanks! - bugfixed stream class offset handling on 32bit platforms --------------------------------------------------------------------------- Version 3.10.3 (rgerhards), 2008-01-28 - fixed a bug with standard template definitions (not a big deal) - thanks to varmojfekoj for spotting it - run-time instrumentation added - implemented disk-assisted queue mode, which enables on-demand disk spooling if the queue's in-memory queue is exhausted - implemented a dynamic worker thread pool for processing incoming messages; workers are started and shut down as need arises - implemented a run-time instrumentation debug package - implemented the $MainMsgQueueSaveOnShutdown config directive - implemented the $MainMsgQueueWorkerThreadMinimumMessages config directive - implemented the $MainMsgQueueTimeoutWorkerThreadShutdown config directive --------------------------------------------------------------------------- Version 3.10.2 (rgerhards), 2008-01-14 - added the ability to keep stop rsyslogd without the need to drain the main message queue. In disk queue mode, rsyslog continues to run from the point where it stopped. In case of a system failure, it continues to process messages from the last checkpoint. - fixed a bug that caused a segfault on startup when no $WorkDir directive was specified in rsyslog.conf - provided more fine-grain control over shutdown timeouts and added a way to specify the enqueue timeout when the main message queue is full - implemented $MainMsgQueueCheckpointInterval config directive - implemented $MainMsgQueueTimeoutActionCompletion config directive - implemented $MainMsgQueueTimeoutEnqueue config directive - implemented $MainMsgQueueTimeoutShutdown config directive --------------------------------------------------------------------------- Version 3.10.1 (rgerhards), 2008-01-10 - implemented the "disk" queue mode. However, it currently is of very limited use, because it does not support persistence over rsyslogd runs. So when rsyslogd is stopped, the queue is drained just as with the in-memory queue modes. Persistent queues will be a feature of the next release. - performance-optimized string class, should bring an overall improvement - fixed a memory leak in imudp -- thanks to varmojfekoj for the patch - fixed a race condition that could lead to a rsyslogd hang when during HUP or termination - done some doc updates - added $WorkDirectory config directive - added $MainMsgQueueFileName config directive - added $MainMsgQueueMaxFileSize config directive --------------------------------------------------------------------------- Version 3.10.0 (rgerhards), 2008-01-07 - implemented input module interface and initial input modules - enhanced threading for input modules (each on its own thread now) - ability to bind UDP listeners to specific local interfaces/ports and ability to run multiple of them concurrently - added ability to specify listen IP address for UDP syslog server - license changed to GPLv3 - mark messages are now provided by loadble module immark - rklogd is no longer provided. Its functionality has now been taken over by imklog, a loadable input module. This offers a much better integration into rsyslogd and makes sure that the kernel logger process is brought up and down at the appropriate times - enhanced $IncludeConfig directive to support wildcard characters (thanks to Michael Biebl) - all inputs are now implemented as loadable plugins - enhanced threading model: each input module now runs on its own thread - enhanced message queue which now supports different queueing methods (among others, this can be used for performance fine-tuning) - added a large number of new configuration directives for the new input modules - enhanced multi-threading utilizing a worker thread pool for the main message queue - compilation without pthreads is no longer supported - much cleaner code due to new objects and removal of single-threading mode --------------------------------------------------------------------------- Version 2.0.8 V2-STABLE (rgerhards), 2008-??-?? - bugfix: ompgsql did not detect problems in sql command execution this could cause loss of messages. The handling was correct if the connection broke, but not if there was a problem with statement execution. The most probable case for such a case would be invalid sql inside the template, and this is now much easier to diagnose. - doc bugfix: default for $DirCreateMode incorrectly stated --------------------------------------------------------------------------- Version 2.0.7 V2-STABLE (rgerhards), 2008-04-14 - bugfix: the default for $DirCreateMode was 0644, and as such wrong. It has now been changed to 0700. For some background, please see http://lists.adiscon.net/pipermail/rsyslog/2009-April/001986.html - bugfix: "$CreateDirs off" also disabled file creation Thanks to William Tisater for analyzing this bug and providing a patch. The actual code change is heavily based on William's patch. - bugfix: memory leak in ompgsql Thanks to Ken for providing the patch - bugfix: potential memory leak in msg.c This one did not surface yet and the issue was actually found due to a problem in v4 - but better fix it here, too --------------------------------------------------------------------------- Version 2.0.6 V2-STABLE (rgerhards), 2008-08-07 - bugfix: memory leaks in rsyslogd, primarily in singlethread mode Thanks to Frederico Nunez for providing the fix - bugfix: copy&paste error lead to dangling if - this caused a very minor issue with re-formatting a RFC3164 date when the message was invalidly formatted and had a colon immediately after the date. This was in the code for some years (even v1 had it) and I think it never had any effect at all in practice. Though, it should be fixed - but definitely nothing to worry about. --------------------------------------------------------------------------- Version 2.0.6 V2-STABLE (rgerhards), 2008-08-07 - bugfix: IPv6 addresses could not be specified in forwarding actions New syntax @[addr]:port introduced to enable that. Root problem was IPv6 addresses contain colons. (backport from 3.21.3) --------------------------------------------------------------------------- Version 2.0.5 STABLE (rgerhards), 2008-05-15 - bugfix: regular expressions inside property replacer did not work properly - adapted to liblogging 0.7.1+ --------------------------------------------------------------------------- Version 2.0.4 STABLE (rgerhards), 2008-03-27 - bugfix: internally generated messages had "FROMHOST" property not set - bugfix: continue parsing if tag is oversize (discard oversize part) - thanks to mclaughlin77@gmail.com for the patch - added $HHOUR and $QHOUR system properties - can be used for half- and quarter-hour logfile rotation --------------------------------------------------------------------------- Version 2.0.3 STABLE (rgerhards), 2008-03-12 - bugfix: setting for $EscapeControlCharactersOnReceive was not properly initialized - bugfix: resolved potential segfault condition on HUP (extremely unlikely to happen in practice), for details see tracker: http://bugzilla.adiscon.com/show_bug.cgi?id=38 - improved the man pages a bit - thanks to Michael Biebl for the patch - bugfix: not properly initialized data could cause several segfaults if there were errors in the config file - thanks to varmojfekoj for the patch --------------------------------------------------------------------------- Version 2.0.2 STABLE (rgerhards), 2008-02-12 - fixed a bug that could cause invalid string handling via strerror_r varmojfekoj provided the patch - many thanks! - added x-info field to rsyslogd startup/shutdown message. Hopefully points users to right location for further info (many don't even know they run rsyslog ;)) - bugfix: suspended actions were not always properly resumed varmojfekoj provided the patch - many thanks! - bugfix: errno could be changed during mark processing, leading to invalid error messages when processing inputs. Thank to varmojfekoj for pointing out this problem. - bugfix: trailing ":" of tag was lost while parsing legacy syslog messages without timestamp - thanks to Anders Blomdell for providing a patch! - bugfix (doc): misspelled config directive, invalid signal info - applied some doc fixes from Michel Biebl and cleaned up some no longer needed files suggested by him - cleaned up stringbuf.c to fix an annoyance reported by Anders Blomdell - fixed bug that caused invalid treatment of tabs (HT) in rsyslog.conf --------------------------------------------------------------------------- Version 2.0.1 STABLE (rgerhards), 2008-01-24 - fixed a bug in integer conversion - but this function was never called, so it is not really a useful bug fix ;) - fixed a bug with standard template definitions (not a big deal) - thanks to varmojfekoj for spotting it - fixed a bug that caused a potential hang in file and fwd output module varmojfekoj provided the patch - many thanks! --------------------------------------------------------------------------- Version 2.0.0 STABLE (rgerhards), 2008-01-02 - re-release of 1.21.2 as STABLE with no modifications except some doc updates --------------------------------------------------------------------------- Version 1.21.2 (rgerhards), 2007-12-28 - created a gss-api output module. This keeps GSS-API code and TCP/UDP code separated. It is also important for forward- compatibility with v3. Please note that this change breaks compatibility with config files created for 1.21.0 and 1.21.1 - this was considered acceptable. - fixed an error in forwarding retry code (could lead to message corruption but surfaced very seldom) - increased portability for older platforms (AI_NUMERICSERV moved) - removed socket leak in omfwd.c - cross-platform patch for GSS-API compile problem on some platforms thanks to darix for the patch! --------------------------------------------------------------------------- Version 1.21.1 (rgerhards), 2007-12-23 - small doc fix for $IncludeConfig - fixed a bug in llDestroy() - bugfix: fixing memory leak when message queue is full and during parsing. Thanks to varmojfekoj for the patch. - bugfix: when compiled without network support, unix sockets were not properly closed - bugfix: memory leak in cfsysline.c/doGetWord() fixed --------------------------------------------------------------------------- Version 1.21.0 (rgerhards), 2007-12-19 - GSS-API support for syslog/TCP connections was added. Thanks to varmojfekoj for providing the patch with this functionality - code cleanup - enhanced $IncludeConfig directive to support wildcard filenames - changed some multithreading synchronization --------------------------------------------------------------------------- Version 1.20.1 (rgerhards), 2007-12-12 - corrected a debug setting that survived release. Caused TCP connections to be retried unnecessarily often. - When a hostname ACL was provided and DNS resolution for that name failed, ACL processing was stopped at that point. Thanks to mildew for the patch. Fedora Bugzilla: http://bugzilla.redhat.com/show_bug.cgi?id=395911 - fixed a potential race condition, see link for details: http://rgerhards.blogspot.com/2007/12/rsyslog-race-condition.html Note that the probability of problems from this bug was very remote - fixed a memory leak that happened when PostgreSQL date formats were used --------------------------------------------------------------------------- Version 1.20.0 (rgerhards), 2007-12-07 - an output module for postgres databases has been added. Thanks to sur5r for contributing this code - unloading dynamic modules has been cleaned up, we now have a real implementation and not just a dummy "good enough for the time being". - enhanced platform independence - thanks to Bartosz Kuzma and Michael Biebl for their very useful contributions - some general code cleanup (including warnings on 64 platforms, only) --------------------------------------------------------------------------- Version 1.19.12 (rgerhards), 2007-12-03 - cleaned up the build system (thanks to Michael Biebl for the patch) - fixed a bug where ommysql was still not compiled with -pthread option --------------------------------------------------------------------------- Version 1.19.11 (rgerhards), 2007-11-29 - applied -pthread option to build when building for multi-threading mode hopefully solves an issue with segfaulting --------------------------------------------------------------------------- Version 1.19.10 (rgerhards), 2007-10-19 - introduced the new ":modulename:" syntax for calling module actions in selector lines; modified ommysql to support it. This is primarily an aid for further modules and a prerequisite to actually allow third party modules to be created. - minor fix in slackware startup script, "-r 0" is now "-r0" - updated rsyslogd doc set man page; now in html format - undid creation of a separate thread for the main loop -- this did not turn out to be needed or useful, so reduce complexity once again. - added doc fixes provided by Michael Biebl - thanks --------------------------------------------------------------------------- Version 1.19.9 (rgerhards), 2007-10-12 - now packaging system which again contains all components in a single tarball - modularized main() a bit more, resulting in less complex code - experimentally added an additional thread - will see if that affects the segfault bug we experience on some platforms. Note that this change is scheduled to be removed again later. --------------------------------------------------------------------------- Version 1.19.8 (rgerhards), 2007-09-27 - improved repeated message processing - applied patch provided by varmojfekoj to support building ommysql in its own way (now also resides in a plugin subdirectory); ommysql is now a separate package - fixed a bug in cvthname() that lead to message loss if part of the source hostname would have been dropped - created some support for distributing ommysql together with the main rsyslog package. I need to re-think it in the future, but for the time being the current mode is best. I now simply include one additional tarball for ommysql inside the main distribution. I look forward to user feedback on how this should be done best. In the long term, a separate project should be spawend for ommysql, but I'd like to do that only after the plugin interface is fully stable (what it is not yet). --------------------------------------------------------------------------- Version 1.19.7 (rgerhards), 2007-09-25 - added code to handle situations where senders send us messages ending with a NUL character. It is now simply removed. This also caused trailing LF reduction to fail, when it was followed by such a NUL. This is now also handled. - replaced some non-thread-safe function calls by their thread-safe counterparts - fixed a minor memory leak that occurred when the %APPNAME% property was used (I think nobody used that in practice) - fixed a bug that caused signal handlers in cvthname() not to be restored when a malicious pointer record was detected and processing of the message been stopped for that reason (this should be really rare and can not be related to the segfault bug we are hunting). - fixed a bug in cvthname that lead to passing a wrong parameter - in practice, this had no impact. - general code cleanup (e.g. compiler warnings, comments) --------------------------------------------------------------------------- Version 1.19.6 (rgerhards), 2007-09-11 - applied patch by varmojfekoj to change signal handling to the new sigaction API set (replacing the depreciated signal() calls and its friends. - fixed a bug that in --enable-debug mode caused an assertion when the discard action was used - cleaned up compiler warnings - applied patch by varmojfekoj to FIX a bug that could cause segfaults if empty properties were processed using modifying options (e.g. space-cc, drop-cc) - fixed man bug: rsyslogd supports -l option --------------------------------------------------------------------------- Version 1.19.5 (rgerhards), 2007-09-07 - changed part of the CStr interface so that better error tracking is provided and the calling sequence is more intuitive (there were invalid calls based on a too-weird interface) - (hopefully) fixed some remaining bugs rooted in wrong use of the CStr class. These could lead to program abort. - applied patch by varmojfekoj two fix two potential segfault situations - added $ModDir config directive - modified $ModLoad so that an absolute path may be specified as module name (e.g. /rsyslog/ommysql.so) --------------------------------------------------------------------------- Version 1.19.4 (rgerhards/varmojfekoj), 2007-09-04 - fixed a number of small memory leaks - thanks varmojfekoj for patching - fixed an issue with CString class that could lead to rsyslog abort in tplToString() - thanks varmojfekoj for patching - added a man-version of the config file documentation - thanks to Michel Samia for providing the man file - fixed bug: a template like this causes an infinite loop: $template opts,"%programname:::a,b%" thanks varmojfekoj for the patch - fixed bug: case changing options crash freeing the string pointer because they modify it: $template opts2,"%programname::1:lowercase%" thanks varmojfekoj for the patch --------------------------------------------------------------------------- Version 1.19.3 (mmeckelein/varmojfekoj), 2007-08-31 - small mem leak fixed (after calling parseSelectorAct) - Thx varmojfekoj - documentation section "Regular File" und "Blocks" updated - solved an issue with dynamic file generation - Once again many thanks to varmojfekoj - the negative selector for program name filter (Blocks) does not work as expected - Thanks varmojfekoj for patching - added forwarding information to sysklogd (requires special template) to config doc --------------------------------------------------------------------------- Version 1.19.2 (mmeckelein/varmojfekoj), 2007-08-28 - a specifically formed message caused a segfault - Many thanks varmojfekoj for providing a patch - a typo and a weird condition are fixed in msg.c - Thanks again varmojfekoj - on file creation the file was always owned by root:root. This is fixed now - Thanks ypsa for solving this issue --------------------------------------------------------------------------- Version 1.19.1 (mmeckelein), 2007-08-22 - a bug that caused a high load when a TCP/UDP connection was closed is fixed now - Thanks mildew for solving this issue - fixed a bug which caused a segfault on reinit - Thx varmojfekoj for the patch - changed the hardcoded module path "/lib/rsyslog" to $(pkglibdir) in order to avoid trouble e.g. on 64 bit platforms (/lib64) - many thanks Peter Vrabec and darix, both provided a patch for solving this issue - enhanced the unloading of modules - thanks again varmojfekoj - applied a patch from varmojfekoj which fixes various little things in MySQL output module --------------------------------------------------------------------------- Version 1.19.0 (varmojfekoj/rgerhards), 2007-08-16 - integrated patch from varmojfekoj to make the mysql module a loadable one many thanks for the patch, MUCH appreciated --------------------------------------------------------------------------- Version 1.18.2 (rgerhards), 2007-08-13 - fixed a bug in outchannel code that caused templates to be incorrectly parsed - fixed a bug in ommysql that caused a wrong ";template" missing message - added some code for unloading modules; not yet fully complete (and we do not yet have loadable modules, so this is no problem) - removed debian subdirectory by request of a debian packager (this is a special subdir for debian and there is also no point in maintaining it when there is a debian package available - so I gladly did this) in some cases - improved overall doc quality (some pages were quite old) and linked to more of the online resources. - improved /contrib/delete_mysql script by adding a host option and some other minor modifications --------------------------------------------------------------------------- Version 1.18.1 (rgerhards), 2007-08-08 - applied a patch from varmojfekoj which solved a potential segfault of rsyslogd on HUP - applied patch from Michel Samia to fix compilation when the pthreads feature is disabled - some code cleanup (moved action object to its own file set) - add config directive $MainMsgQueueSize, which now allows one to configure the queue size dynamically - all compile-time settings are now shown in rsyslogd -v, not just the active ones - enhanced performance a little bit more - added config file directive $ActionResumeInterval - fixed a bug that prevented compilation under debian sid - added a contrib directory for user-contributed useful things --------------------------------------------------------------------------- Version 1.18.0 (rgerhards), 2007-08-03 - rsyslog now supports fallback actions when an action did not work. This is a great feature e.g. for backup database servers or backup syslog servers - modified rklogd to only change the console log level if -c is specified - added feature to use multiple actions inside a single selector - implemented $ActionExecOnlyWhenPreviousIsSuspended config directive - error messages during startup are now spit out to the configured log destinations --------------------------------------------------------------------------- Version 1.17.6 (rgerhards), 2007-08-01 - continued to work on output module modularization - basic stage of this work is now FINISHED - fixed bug in OMSRcreate() - always returned SR_RET_OK - fixed a bug that caused ommysql to always complain about missing templates - fixed a mem leak in OMSRdestruct - freeing the object itself was forgotten - thanks to varmojfekoj for the patch - fixed a memory leak in syslogd/init() that happened when the config file could not be read - thanks to varmojfekoj for the patch - fixed insufficient memory allocation in addAction() and its helpers. The initial fix and idea was developed by mildew, I fine-tuned it a bit. Thanks a lot for the fix, I'd probably had pulled out my hair to find the bug... - added output of config file line number when a parsing error occurred - fixed bug in objomsr.c that caused program to abort in debug mode with an invalid assertion (in some cases) - fixed a typo that caused the default template for MySQL to be wrong. thanks to mildew for catching this. - added configuration file command $DebugPrintModuleList and $DebugPrintCfSysLineHandlerList - fixed an invalid value for the MARK timer - unfortunately, there was a testing aid left in place. This resulted in quite frequent MARK messages - added $IncludeConfig config directive - applied a patch from mildew to prevent rsyslogd from freezing under heavy load. This could happen when the queue was full. Now, we drop messages but rsyslogd remains active. --------------------------------------------------------------------------- Version 1.17.5 (rgerhards), 2007-07-30 - continued to work on output module modularization - fixed a missing file bug - thanks to Andrea Montanari for reporting this problem - fixed a problem with shutting down the worker thread and freeing the selector_t list - this caused messages to be lost, because the message queue was not properly drained before the selectors got destroyed. --------------------------------------------------------------------------- Version 1.17.4 (rgerhards), 2007-07-27 - continued to work on output module modularization - fixed a situation where rsyslogd could create zombie processes thanks to mildew for the patch - applied patch from Michel Samia to fix compilation when NOT compiled for pthreads --------------------------------------------------------------------------- Version 1.17.3 (rgerhards), 2007-07-25 - continued working on output module modularization - fixed a bug that caused rsyslogd to segfault on exit (and probably also on HUP), when there was an unsent message in a selector that required forwarding and the dns lookup failed for that selector (yes, it was pretty unlikely to happen;)) thanks to varmojfekoj for the patch - fixed a memory leak in config file parsing and die() thanks to varmojfekoj for the patch - rsyslogd now checks on startup if it is capable to perform any work at all. If it cant, it complains and terminates thanks to Michel Samia for providing the patch! - fixed a small memory leak when HUPing syslogd. The allowed sender list now gets freed. thanks to mildew for the patch. - changed the way error messages in early startup are logged. They now do no longer use the syslogd code directly but are rather send to stderr. --------------------------------------------------------------------------- Version 1.17.2 (rgerhards), 2007-07-23 - made the port part of the -r option optional. Needed for backward compatibility with sysklogd - replaced system() calls with something more reasonable. Please note that this might break compatibility with some existing configuration files. We accept this in favor of the gained security. - removed a memory leak that could occur if timegenerated was used in RFC 3164 format in templates - did some preparation in msg.c for advanced multithreading - placed the hooks, but not yet any active code - worked further on modularization - added $ModLoad MySQL (dummy) config directive - added DropTrailingLFOnReception config directive --------------------------------------------------------------------------- Version 1.17.1 (rgerhards), 2007-07-20 - fixed a bug that caused make install to install rsyslogd and rklogd under the wrong names - fixed bug that caused $AllowedSenders to handle IPv6 scopes incorrectly; also fixed but that could garble $AllowedSender wildcards. Thanks to mildew@gmail.com for the patch - minor code cleanup - thanks to Peter Vrabec for the patch - fixed minimal memory leak on HUP (caused by templates) thanks to varmojfekoj for the patch - fixed another memory leak on HUPing and on exiting rsyslogd again thanks to varmojfekoj for the patch - code cleanup (removed compiler warnings) - fixed portability bug in configure.ac - thanks to Bartosz Kuźma for patch - moved msg object into its own file set - added the capability to continue trying to write log files when the file system is full. Functionality based on patch by Martin Schulze to sysklogd package. --------------------------------------------------------------------------- Version 1.17.0 (RGer), 2007-07-17 - added $RepeatedLineReduction config parameter - added $EscapeControlCharactersOnReceive config parameter - added $ControlCharacterEscapePrefix config parameter - added $DirCreateMode config parameter - added $CreateDirs config parameter - added $DebugPrintTemplateList config parameter - added $ResetConfigVariables config parameter - added $FileOwner config parameter - added $FileGroup config parameter - added $DirOwner config parameter - added $DirGroup config parameter - added $FailOnChownFailure config parameter - added regular expression support to the filter engine thanks to Michel Samia for providing the patch! - enhanced $AllowedSender functionality. Credits to mildew@gmail.com for the patch doing that - added IPv6 support - allowed DNS hostnames - allowed DNS wildcard names - added new option $DropMsgsWithMaliciousDnsPTRRecords - added autoconf so that rfc3195d, rsyslogd and klogd are stored to /sbin - added capability to auto-create directories with dynaFiles --------------------------------------------------------------------------- Version 1.16.0 (RGer/Peter Vrabec), 2007-07-13 - The Friday, 13th Release ;) - build system switched to autotools - removed SYSV preprocessor macro use, replaced with autotools equivalents - fixed a bug that caused rsyslogd to segfault when TCP listening was disabled and it terminated - added new properties "syslogfacility-text" and "syslogseverity-text" thanks to varmojfekoj for the patch - added the -x option to disable hostname dns resolution thanks to varmojfekoj for the patch - begun to better modularize syslogd.c - this is an ongoing project; moved type definitions to a separate file - removed some now-unused fields from struct filed - move file size limit fields in struct field to the "right spot" (the file writing part of the union - f_un.f_file) - subdirectories linux and solaris are no longer part of the distribution package. This is not because we cease support for them, but there are no longer any files in them after the move to autotools --------------------------------------------------------------------------- Version 1.15.1 (RGer), 2007-07-10 - fixed a bug that caused a dynaFile selector to stall when there was an open error with one file - improved template processing for dynaFiles; templates are now only looked up during initialization - speeds up processing - optimized memory layout in struct filed when compiled with MySQL support - fixed a bug that caused compilation without SYSLOG_INET to fail - re-enabled the "last message repeated n times" feature. This feature was not taken care of while rsyslogd evolved from sysklogd and it was more or less defunct. Now it is fully functional again. - added system properties: $NOW, $YEAR, $MONTH, $DAY, $HOUR, $MINUTE - fixed a bug in iovAsString() that caused a memory leak under stress conditions (most probably memory shortage). This was unlikely to ever happen, but it doesn't hurt doing it right - cosmetic: defined type "uchar", change all unsigned chars to uchar --------------------------------------------------------------------------- Version 1.15.0 (RGer), 2007-07-05 - added ability to dynamically generate file names based on templates and thus properties. This was a much-requested feature. It makes life easy when it e.g. comes to splitting files based on the sender address. - added $umask and $FileCreateMode config file directives - applied a patch from Bartosz Kuzma to compile cleanly under NetBSD - checks for extra (unexpected) characters in system config file lines have been added - added IPv6 documentation - was accidentally missing from CVS - begun to change char to unsigned char --------------------------------------------------------------------------- Version 1.14.2 (RGer), 2007-07-03 ** this release fixes all known nits with IPv6 ** - restored capability to do /etc/service lookup for "syslog" service when -r 0 was given - documented IPv6 handling of syslog messages - integrate patch from Bartosz Kuźma to make rsyslog compile under Solaris again (the patch replaced a strndup() call, which is not available under Solaris - improved debug logging when waiting on select - updated rsyslogd man page with new options (-46A) --------------------------------------------------------------------------- Version 1.14.1 (RGer/Peter Vrabec), 2007-06-29 - added Peter Vrabec's patch for IPv6 TCP - prefixed all messages send to stderr in rsyslogd with "rsyslogd: " --------------------------------------------------------------------------- Version 1.14.0 (RGer/Peter Vrabec), 2007-06-28 - Peter Vrabec provided IPv6 for rsyslog, so we are now IPv6 enabled IPv6 Support is currently for UDP only, TCP is to come soon. AllowedSender configuration does not yet work for IPv6. - fixed code in iovCreate() that broke C's strict aliasing rules - fixed some char/unsigned char differences that forced the compiler to spit out warning messages - updated the Red Hat init script to fix a known issue (thanks to Peter Vrabec) --------------------------------------------------------------------------- Version 1.13.5 (RGer), 2007-06-22 - made the TCP session limit configurable via command line switch now -t , - added man page for rklogd(8) (basically a copy from klogd, but now there is one...) - fixed a bug that caused internal messages (e.g. rsyslogd startup) to appear without a tag. - removed a minor memory leak that occurred when TAG processing requalified a HOSTNAME to be a TAG (and a TAG already was set). - removed potential small memory leaks in MsgSet***() functions. There would be a leak if a property was re-set, something that happened extremely seldom. --------------------------------------------------------------------------- Version 1.13.4 (RGer), 2007-06-18 - added a new property "PRI-text", which holds the PRI field in textual form (e.g. "syslog.info") - added alias "syslogseverity" for "syslogpriority", which is a misleading property name that needs to stay for historical reasons (and backward-compatibility) - added doc on how to record PRI value in log file - enhanced signal handling in klogd, including removal of an unsafe call to the logging system during signal handling --------------------------------------------------------------------------- Version 1.13.3 (RGer), 2007-06-15 - create a version of syslog.c from scratch. This is now - highly optimized for rsyslog - removes an incompatible license problem as the original version had a BSD license with advertising clause - fixed in the regard that rklogd will continue to work when rsyslogd has been restarted (the original version, as well as sysklogd, will remain silent then) - solved an issue with an extra NUL char at message end that the original version had - applied some changes to klogd to care for the new interface - fixed a bug in syslogd.c which prevented compiling under debian --------------------------------------------------------------------------- Version 1.13.2 (RGer), 2007-06-13 - lib order in makefile patched to facilitate static linking - thanks to Bennett Todd for providing the patch - Integrated a patch from Peter Vrabec (pvrabec@redhat.com): - added klogd under the name of rklogd (remove dependency on original sysklogd package - createDB.sql now in UTF - added additional config files for use on Red Hat --------------------------------------------------------------------------- Version 1.13.1 (RGer), 2007-02-05 - changed the listen backlog limit to a more reasonable value based on the maximum number of TCP connections configured (10% + 5) - thanks to Guy Standen for the hint (actually, the limit was 5 and that was a left-over from early testing). - fixed a bug in makefile which caused DB-support to be disabled when NETZIP support was enabled - added the -e option to allow transmission of every message to remote hosts (effectively turns off duplicate message suppression) - (somewhat) improved memory consumption when compiled with MySQL support - looks like we fixed an incompatibility with MySQL 5.x and above software At least in one case, the remote server name was destroyed, leading to a connection failure. The new, improved code does not have this issue and so we see this as solved (the new code is generally somewhat better, so there is a good chance we fixed this incompatibility). --------------------------------------------------------------------------- Version 1.13.0 (RGer), 2006-12-19 - added '$' as ToPos property replacer specifier - means "up to the end of the string" - property replacer option "escape-cc", "drop-cc" and "space-cc" added - changed the handling of \0 characters inside syslog messages. We now consistently escape them to "#000". This is somewhat recommended in the draft-ietf-syslog-protocol-19 draft. While the real recommendation is to not escape any characters at all, we can not do this without considerable modification of the code. So we escape it to "#000", which is consistent with a sample found in the Internet-draft. - removed message glue logic (see printchopped() comment for details) Also caused removal of parts table and thus some improvements in memory usage. - changed the default MAXLINE to 2048 to take care of recent syslog standardization efforts (can easily be changed in syslogd.c) - added support for byte-counted TCP syslog messages (much like syslog-transport-tls-05 Internet Draft). This was necessary to support compression over TCP. - added support for receiving compressed syslog messages - added support for sending compressed syslog messages - fixed a bug where the last message in a syslog/tcp stream was lost if it was not properly terminated by a LF character --------------------------------------------------------------------------- Version 1.12.3 (RGer), 2006-10-04 - implemented some changes to support Solaris (but support is not yet complete) - commented out (via #if 0) some methods that are currently not being use but should be kept for further us - added (interim) -u 1 option to turn off hostname and tag parsing - done some modifications to better support Fedora - made the field delimiter inside property replace configurable via template - fixed a bug in property replacer: if fields were used, the delimitor became part of the field. Up until now, this was barely noticeable as the delimiter as TAB only and thus invisible to a human. With other delimiters available now, it quickly showed up. This bug fix might cause some grief to existing installations if they used the extra TAB for whatever reasons - sorry folks... Anyhow, a solution is easy: just add a TAB character constant into your template. Thus, there has no attempt been made to do this in a backwards-compatible way. --------------------------------------------------------------------------- Version 1.12.2 (RGer), 2006-02-15 - fixed a bug in the RFC 3339 date formatter. An extra space was added after the actual timestamp - added support for providing high-precision RFC3339 timestamps for (rsyslogd-)internally-generated messages - very (!) experimental support for syslog-protocol internet draft added (the draft is experimental, the code is solid ;)) - added support for field-extracting in the property replacer - enhanced the legacy-syslog parser so that it can interpret messages that do not contain a TIMESTAMP - fixed a bug that caused the default socket (usually /dev/log) to be opened even when -o command line option was given - fixed a bug in the Debian sample startup script - it caused rsyslogd to listen to remote requests, which it shouldn't by default --------------------------------------------------------------------------- Version 1.12.1 (RGer), 2005-11-23 - made multithreading work with BSD. Some signal-handling needed to be restructured. Also, there might be a slight delay of up to 10 seconds when huping and terminating rsyslogd under BSD - fixed a bug where a NULL-pointer was passed to printf() in logmsg(). - fixed a bug during "make install" where rc3195d was not installed Thanks to Bennett Todd for spotting this. - fixed a bug where rsyslogd dumped core when no TAG was found in the received message - enhanced message parser so that it can deal with missing hostnames in many cases (may not be totally fail-safe) - fixed a bug where internally-generated messages did not have the correct TAG --------------------------------------------------------------------------- Version 1.12.0 (RGer), 2005-10-26 - moved to a multi-threaded design. single-threading is still optionally available. Multi-threading is experimental! - fixed a potential race condition. In the original code, marking was done by an alarm handler, which could lead to all sorts of bad things. This has been changed now. See comments in syslogd.c/domark() for details. - improved debug output for property-based filters - not a code change, but: I have checked all exit()s to make sure that none occurs once rsyslogd has started up. Even in unusual conditions (like low-memory conditions) rsyslogd somehow remains active. Of course, it might loose a message or two, but at least it does not abort and it can also recover when the condition no longer persists. - fixed a bug that could cause loss of the last message received immediately before rsyslogd was terminated. - added comments on thread-safety of global variables in syslogd.c - fixed a small bug: spurios printf() when TCP syslog was used - fixed a bug that causes rsyslogd to dump core on termination when one of the selector lines did not receive a message during the run (very unlikely) - fixed an one-too-low memory allocation in the TCP sender. Could result in rsyslogd dumping core. - fixed a bug with regular expression support (thanks to Andres Riancho) - a little bit of code restructuring (especially main(), which was horribly large) --------------------------------------------------------------------------- Version 1.11.1 (RGer), 2005-10-19 - support for BSD-style program name and host blocks - added a new property "programname" that can be used in templates - added ability to specify listen port for rfc3195d - fixed a bug that rendered the "startswith" comparison operation unusable. - changed more functions to "static" storage class to help compiler optimize (should have been static in the first place...) - fixed a potential memory leak in the string buffer class destructor. As the destructor was previously never called, the leak did not actually appear. - some internal restructuring in anticipation/preparation of minimal multi-threading support - rsyslogd still shares some code with the sysklogd project. Some patches for this shared code have been brought over from the sysklogd CVS. --------------------------------------------------------------------------- Version 1.11.0 (RGer), 2005-10-12 - support for receiving messages via RFC 3195; added rfc3195d for that purpose - added an additional guard to prevent rsyslogd from aborting when the 2gb file size limit is hit. While a user can configure rsyslogd to handle such situations, it would abort if that was not done AND large file support was not enabled (ok, this is hopefully an unlikely scenario) - fixed a bug that caused additional Unix domain sockets to be incorrectly processed - could lead to message loss in extreme cases --------------------------------------------------------------------------- Version 1.10.2 (RGer), 2005-09-27 - added comparison operations in property-based filters: * isequal * startswith - added ability to negate all property-based filter comparison operations by adding a !-sign right in front of the operation name - added the ability to specify remote senders for UDP and TCP received messages. Allows to block all but well-known hosts - changed the $-config line directives to be case-INsensitive - new command line option -w added: "do not display warnings if messages from disallowed senders are received" - fixed a bug that caused rsyslogd to dump core when the compare value was not quoted in property-based filters - fixed a bug in the new CStr compare function which lead to invalid results (fortunately, this function was not yet used widely) - added better support for "debugging" rsyslog.conf property filters (only if -d switch is given) - changed some function definitions to static, which eventually enables some compiler optimizations - fixed a bug in MySQL code; when a SQL error occurred, rsyslogd could run in a tight loop. This was due to invalid sequence of error reporting and is now fixed. --------------------------------------------------------------------------- Version 1.10.1 (RGer), 2005-09-23 - added the ability to execute a shell script as an action. Thanks to Bjoern Kalkbrenner for providing the code! - fixed a bug in the MySQL code; due to the bug the automatic one-time retry after an error did not happen - this lead to error message in cases where none should be seen (e.g. after a MySQL restart) - fixed a security issue with SQL-escaping in conjunction with non-(SQL-)standard MySQL features. --------------------------------------------------------------------------- Version 1.10.0 (RGer), 2005-09-20 REMINDER: 1.10 is the first unstable version if the 1.x series! - added the capability to filter on any property in selector lines (not just facility and priority) - changed stringbuf into a new counted string class - added support for a "discard" action. If a selector line with discard (~ character) is found, no selector lines *after* that line will be processed. - thanks to Andres Riancho, regular expression support has been added to the template engine - added the FROMHOST property in the template processor, which could previously not be obtained. Thanks to Cristian Testa for pointing this out and even providing a fix. - added display of compile-time options to -v output - performance improvement for production build - made some checks to happen only during debug mode - fixed a problem with compiling on SUSE and - while doing so - removed the socket call to set SO_BSDCOMPAT in cases where it is obsolete. --------------------------------------------------------------------------- Version 1.0.4 (RGer), 2006-02-01 - a small but important fix: the tcp receiver had two forgotten printf's in it that caused a lot of unnecessary output to stdout. This was important enough to justify a new release --------------------------------------------------------------------------- Version 1.0.3 (RGer), 2005-11-14 - added an additional guard to prevent rsyslogd from aborting when the 2gb file size limit is hit. While a user can configure rsyslogd to handle such situations, it would abort if that was not done AND large file support was not enabled (ok, this is hopefully an unlikely scenario) - fixed a bug that caused additional Unix domain sockets to be incorrectly processed - could lead to message loss in extreme cases - applied some patches available from the sysklogd project to code shared from there - fixed a bug that causes rsyslogd to dump core on termination when one of the selector lines did not receive a message during the run (very unlikely) - fixed an one-too-low memory allocation in the TCP sender. Could result in rsyslogd dumping core. - fixed a bug in the TCP sender that caused the retry logic to fail after an error or receiver overrun - fixed a bug in init() that could lead to dumping core - fixed a bug that could lead to dumping core when no HOSTNAME or no TAG was present in the syslog message --------------------------------------------------------------------------- Version 1.0.2 (RGer), 2005-10-05 - fixed an issue with MySQL error reporting. When an error occurred, the MySQL driver went into an endless loop (at least in most cases). --------------------------------------------------------------------------- Version 1.0.1 (RGer), 2005-09-23 - fixed a security issue with SQL-escaping in conjunction with non-(SQL-)standard MySQL features. --------------------------------------------------------------------------- Version 1.0.0 (RGer), 2005-09-12 - changed install doc to cover daily cron scripts - a trouble source - added rc script for slackware (provided by Chris Elvidge - thanks!) - fixed a really minor bug in usage() - the -r option was still reported as without the port parameter --------------------------------------------------------------------------- Version 0.9.8 (RGer), 2005-09-05 - made startup and shutdown message more consistent and included the pid, so that they can be easier correlated. Used syslog-protocol structured data format for this purpose. - improved config info in startup message, now tells not only if it is listening remote on udp, but also for tcp. Also includes the port numbers. The previous startup message was misleading, because it did not say "remote reception" if rsyslogd was only listening via tcp (but not via udp). - added a "how can you help" document to the doc set --------------------------------------------------------------------------- Version 0.9.7 (RGer), 2005-08-15 - some of the previous doc files (like INSTALL) did not properly reflect the changes to the build process and the new doc. Fixed that. - changed syslogd.c so that when compiled without database support, an error message is displayed when a database action is detected in the config file (previously this was used as an user rule ;)) - fixed a bug in the os-specific Makefiles which caused MySQL support to not be compiled, even if selected --------------------------------------------------------------------------- Version 0.9.6 (RGer), 2005-08-09 - greatly enhanced documentation. Now available in html format in the "doc" folder and FreeBSD. Finally includes an install howto. - improved MySQL error messages a little - they now show up as log messages, too (formerly only in debug mode) - added the ability to specify the listen port for udp syslog. WARNING: This introduces an incompatibility. Formerly, udp syslog was enabled by the -r command line option. Now, it is "-r [port]", which is consistent with the tcp listener. However, just -r will now return an error message. - added sample startup scripts for Debian and FreeBSD - added support for easy feature selection in the makefile. Un- fortunately, this also means I needed to spilt the make file for different OS and distros. There are some really bad syntax differences between FreeBSD and Linux make. --------------------------------------------------------------------------- Version 0.9.5 (RGer), 2005-08-01 - the "semicolon bug" was actually not (fully) solved in 0.9.4. One part of the bug was solved, but another still existed. This one is fixed now, too. - the "semicolon bug" actually turned out to be a more generic bug. It appeared whenever an invalid template name was given. With some selector actions, rsyslogd dumped core, with other it "just" had a small resource leak with others all worked well. These anomalies are now fixed. Note that they only appeared during system initialization once the system was running, nothing bad happened. - improved error reporting for template errors on startup. They are now shown on the console and the start-up tty. Formerly, they were only visible in debug mode. - support for multiple instances of rsyslogd on a single machine added - added new option "-o" --> omit local unix domain socket. This option enables rsyslogd NOT to listen to the local socket. This is most helpful when multiple instances of rsyslogd (or rsyslogd and another syslogd) shall run on a single system. - added new option "-i " which allows one to specify the pidfile. This is needed when multiple instances of rsyslogd are to be run. - the new project home page is now online at www.rsyslog.com --------------------------------------------------------------------------- Version 0.9.4 (RGer), 2005-07-25 - finally added the TCP sender. It now supports non-blocking mode, no longer disabling message reception during connect. As it is now, it is usable in production. The code could be more sophisticated, but I've kept it short in anticipation of the move to liblogging, which will lead to the removal of the code just written ;) - the "exiting on signal..." message still had the "syslogd" name in it. Changed this to "rsyslogd", as we do not have a large user base yet, this should pose no problem. - fixed "the semicolon" bug. rsyslogd dumped core if a write-db action was specified but no semicolon was given after the password (an empty template was ok, but the semicolon needed to be present). - changed a default for traditional output format. During testing, it was seen that the timestamp written to file in default format was the time of message reception, not the time specified in the TIMESTAMP field of the message itself. Traditionally, the message TIMESTAMP is used and this has been changed now. --------------------------------------------------------------------------- Version 0.9.3 (RGer), 2005-07-19 - fixed a bug in the message parser. In June, the RFC 3164 timestamp was not correctly parsed (yes, only in June and some other months, see the code comment to learn why...) - added the ability to specify the destination port when forwarding syslog messages (both for TCP and UDP) - added an very experimental TCP sender (activated by @@machine:port in config). This is not yet for production use. If the receiver is not alive, rsyslogd will wait quite some time until the connection request times out, which most probably leads to loss of incoming messages. --------------------------------------------------------------------------- Version 0.9.2 (RGer), around 2005-07-06 - I intended to change the maxsupported message size to 32k to support IHE - but given the memory inefficiency in the usual use cases, I have not done this. I have, however, included very specific instructions on how to do this in the source code. I have also done some testing with 32k messages, so you can change the max size without taking too much risk. - added a syslog/tcp receiver; we now can receive messages via plain tcp, but we can still send only via UDP. The syslog/tcp receiver is the primary enhancement of this release. - slightly changed some error messages that contained a spurios \n at the end of the line (which gives empty lines in your log...) --------------------------------------------------------------------------- Version 0.9.1 (RGer) - fixed code so that it compiles without errors under FreeBSD - removed now unused function "allocate_log()" from syslogd.c - changed the make file so that it contains more defines for different environments (in the long term, we need a better system for disabling/enabling features...) - changed some printf's printing off_t types to %lld and explicit (long long) casts. I tried to figure out the exact type, but did not succeed in this. In the worst case, ultra-large peta- byte files will now display funny informational messages on rollover, something I think we can live with for the neersion 3.11.2 (rgerhards), 2008-02-?? --------------------------------------------------------------------------- Version 3.11.1 (rgerhards), 2008-02-12 - SNMP trap sender added thanks to Andre Lorbach (omsnmp) - added input-plugin interface specification in form of a (copy) template input module - applied documentation fix by Michael Biebl -- many thanks! - bugfix: immark did not have MARK flags set... - added x-info field to rsyslogd startup/shutdown message. Hopefully points users to right location for further info (many don't even know they run rsyslog ;)) - bugfix: trailing ":" of tag was lost while parsing legacy syslog messages without timestamp - thanks to Anders Blomdell for providing a patch! - fixed a bug in stringbuf.c related to STRINGBUF_TRIM_ALLOCSIZE, which wasn't supposed to be used with rsyslog. Put a warning message up that tells this feature is not tested and probably not worth the effort. Thanks to Anders Blomdell fro bringing this to our attention - somewhat improved performance of string buffers - fixed bug that caused invalid treatment of tabs (HT) in rsyslog.conf - bugfix: setting for $EscapeControlCharactersOnReceive was not properly initialized - clarified usage of space-cc property replacer option - improved abort diagnostic handler - some initial effort for malloc/free runtime debugging support - bugfix: using dynafile actions caused rsyslogd abort - fixed minor man errors thanks to Michael Biebl --------------------------------------------------------------------------- Version 3.11.0 (rgerhards), 2008-01-31 - implemented queued actions - implemented simple rate limiting for actions - implemented deliberate discarding of lower priority messages over higher priority ones when a queue runs out of space - implemented disk quotas for disk queues - implemented the $ActionResumeRetryCount config directive - added $ActionQueueFilename config directive - added $ActionQueueSize config directive - added $ActionQueueHighWaterMark config directive - added $ActionQueueLowWaterMark config directive - added $ActionQueueDiscardMark config directive - added $ActionQueueDiscardSeverity config directive - added $ActionQueueCheckpointInterval config directive - added $ActionQueueType config directive - added $ActionQueueWorkerThreads config directive - added $ActionQueueTimeoutshutdown config directive - added $ActionQueueTimeoutActionCompletion config directive - added $ActionQueueTimeoutenQueue config directive - added $ActionQueueTimeoutworkerThreadShutdown config directive - added $ActionQueueWorkerThreadMinimumMessages config directive - added $ActionQueueMaxFileSize config directive - added $ActionQueueSaveonShutdown config directive - addded $ActionQueueDequeueSlowdown config directive - addded $MainMsgQueueDequeueSlowdown config directive - bugfix: added forgotten docs to package - improved debugging support - fixed a bug that caused $MainMsgQueueCheckpointInterval to work incorrectly - when a long-running action needs to be cancelled on shutdown, the message that was processed by it is now preserved. This finishes support for guaranteed delivery of messages (if the output supports it, of course) - fixed bug in output module interface, see http://sourceforge.net/tracker/index.php?func=detail&aid=1881008&group_id=123448&atid=696552 - changed the ommysql output plugin so that the (lengthy) connection initialization now takes place in message processing. This works much better with the new queued action mode (fast startup) - fixed a bug that caused a potential hang in file and fwd output module varmojfekoj provided the patch - many thanks! - bugfixed stream class offset handling on 32bit platforms --------------------------------------------------------------------------- Version 3.10.3 (rgerhards), 2008-01-28 - fixed a bug with standard template definitions (not a big deal) - thanks to varmojfekoj for spotting it - run-time instrumentation added - implemented disk-assisted queue mode, which enables on-demand disk spooling if the queue's in-memory queue is exhausted - implemented a dynamic worker thread pool for processing incoming messages; workers are started and shut down as need arises - implemented a run-time instrumentation debug package - implemented the $MainMsgQueueSaveOnShutdown config directive - implemented the $MainMsgQueueWorkerThreadMinimumMessages config directive - implemented the $MainMsgQueueTimeoutWorkerThreadShutdown config directive --------------------------------------------------------------------------- Version 3.10.2 (rgerhards), 2008-01-14 - added the ability to keep stop rsyslogd without the need to drain the main message queue. In disk queue mode, rsyslog continues to run from the point where it stopped. In case of a system failure, it continues to process messages from the last checkpoint. - fixed a bug that caused a segfault on startup when no $WorkDir directive was specified in rsyslog.conf - provided more fine-grain control over shutdown timeouts and added a way to specify the enqueue timeout when the main message queue is full - implemented $MainMsgQueueCheckpointInterval config directive - implemented $MainMsgQueueTimeoutActionCompletion config directive - implemented $MainMsgQueueTimeoutEnqueue config directive - implemented $MainMsgQueueTimeoutShutdown config directive --------------------------------------------------------------------------- Version 3.10.1 (rgerhards), 2008-01-10 - implemented the "disk" queue mode. However, it currently is of very limited use, because it does not support persistence over rsyslogd runs. So when rsyslogd is stopped, the queue is drained just as with the in-memory queue modes. Persistent queues will be a feature of the next release. - performance-optimized string class, should bring an overall improvement - fixed a memory leak in imudp -- thanks to varmojfekoj for the patch - fixed a race condition that could lead to a rsyslogd hang when during HUP or termination - done some doc updates - added $WorkDirectory config directive - added $MainMsgQueueFileName config directive - added $MainMsgQueueMaxFileSize config directive --------------------------------------------------------------------------- Version 3.10.0 (rgerhards), 2008-01-07 - implemented input module interface and initial input modules - enhanced threading for input modules (each on its own thread now) - ability to bind UDP listeners to specific local interfaces/ports and ability to run multiple of them concurrently - added ability to specify listen IP address for UDP syslog server - license changed to GPLv3 - mark messages are now provided by loadble module immark - rklogd is no longer provided. Its functionality has now been taken over by imklog, a loadable input module. This offers a much better integration into rsyslogd and makes sure that the kernel logger process is brought up and down at the appropriate times - enhanced $IncludeConfig directive to support wildcard characters (thanks to Michael Biebl) - all inputs are now implemented as loadable plugins - enhanced threading model: each input module now runs on its own thread - enhanced message queue which now supports different queueing methods (among others, this can be used for performance fine-tuning) - added a large number of new configuration directives for the new input modules - enhanced multi-threading utilizing a worker thread pool for the main message queue - compilation without pthreads is no longer supported - much cleaner code due to new objects and removal of single-threading mode --------------------------------------------------------------------------- Version 2.0.1 STABLE (rgerhards), 2008-01-24 - fixed a bug in integer conversion - but this function was never called, so it is not really a useful bug fix ;) - fixed a bug with standard template definitions (not a big deal) - thanks to varmojfekoj for spotting it - fixed a bug that caused a potential hang in file and fwd output module varmojfekoj provided the patch - many thanks! --------------------------------------------------------------------------- Version 2.0.0 STABLE (rgerhards), 2008-01-02 - re-release of 1.21.2 as STABLE with no modifications except some doc updates --------------------------------------------------------------------------- Version 1.21.2 (rgerhards), 2007-12-28 - created a gss-api output module. This keeps GSS-API code and TCP/UDP code separated. It is also important for forward- compatibility with v3. Please note that this change breaks compatibility with config files created for 1.21.0 and 1.21.1 - this was considered acceptable. - fixed an error in forwarding retry code (could lead to message corruption but surfaced very seldom) - increased portability for older platforms (AI_NUMERICSERV moved) - removed socket leak in omfwd.c - cross-platform patch for GSS-API compile problem on some platforms thanks to darix for the patch! --------------------------------------------------------------------------- Version 1.21.1 (rgerhards), 2007-12-23 - small doc fix for $IncludeConfig - fixed a bug in llDestroy() - bugfix: fixing memory leak when message queue is full and during parsing. Thanks to varmojfekoj for the patch. - bugfix: when compiled without network support, unix sockets were not properly closed - bugfix: memory leak in cfsysline.c/doGetWord() fixed --------------------------------------------------------------------------- Version 1.21.0 (rgerhards), 2007-12-19 - GSS-API support for syslog/TCP connections was added. Thanks to varmojfekoj for providing the patch with this functionality - code cleanup - enhanced $IncludeConfig directive to support wildcard filenames - changed some multithreading synchronization --------------------------------------------------------------------------- Version 1.20.1 (rgerhards), 2007-12-12 - corrected a debug setting that survived release. Caused TCP connections to be retried unnecessarily often. - When a hostname ACL was provided and DNS resolution for that name failed, ACL processing was stopped at that point. Thanks to mildew for the patch. Fedora Bugzilla: http://bugzilla.redhat.com/show_bug.cgi?id=395911 - fixed a potential race condition, see link for details: http://rgerhards.blogspot.com/2007/12/rsyslog-race-condition.html Note that the probability of problems from this bug was very remote - fixed a memory leak that happened when PostgreSQL date formats were used --------------------------------------------------------------------------- Version 1.20.0 (rgerhards), 2007-12-07 - an output module for postgres databases has been added. Thanks to sur5r for contributing this code - unloading dynamic modules has been cleaned up, we now have a real implementation and not just a dummy "good enough for the time being". - enhanced platform independence - thanks to Bartosz Kuzma and Michael Biebl for their very useful contributions - some general code cleanup (including warnings on 64 platforms, only) --------------------------------------------------------------------------- Version 1.19.12 (rgerhards), 2007-12-03 - cleaned up the build system (thanks to Michael Biebl for the patch) - fixed a bug where ommysql was still not compiled with -pthread option --------------------------------------------------------------------------- Version 1.19.11 (rgerhards), 2007-11-29 - applied -pthread option to build when building for multi-threading mode hopefully solves an issue with segfaulting --------------------------------------------------------------------------- Version 1.19.10 (rgerhards), 2007-10-19 - introduced the new ":modulename:" syntax for calling module actions in selector lines; modified ommysql to support it. This is primarily an aid for further modules and a prerequisite to actually allow third party modules to be created. - minor fix in slackware startup script, "-r 0" is now "-r0" - updated rsyslogd doc set man page; now in html format - undid creation of a separate thread for the main loop -- this did not turn out to be needed or useful, so reduce complexity once again. - added doc fixes provided by Michael Biebl - thanks --------------------------------------------------------------------------- Version 1.19.9 (rgerhards), 2007-10-12 - now packaging system which again contains all components in a single tarball - modularized main() a bit more, resulting in less complex code - experimentally added an additional thread - will see if that affects the segfault bug we experience on some platforms. Note that this change is scheduled to be removed again later. --------------------------------------------------------------------------- Version 1.19.8 (rgerhards), 2007-09-27 - improved repeated message processing - applied patch provided by varmojfekoj to support building ommysql in its own way (now also resides in a plugin subdirectory); ommysql is now a separate package - fixed a bug in cvthname() that lead to message loss if part of the source hostname would have been dropped - created some support for distributing ommysql together with the main rsyslog package. I need to re-think it in the future, but for the time being the current mode is best. I now simply include one additional tarball for ommysql inside the main distribution. I look forward to user feedback on how this should be done best. In the long term, a separate project should be spawend for ommysql, but I'd like to do that only after the plugin interface is fully stable (what it is not yet). --------------------------------------------------------------------------- Version 1.19.7 (rgerhards), 2007-09-25 - added code to handle situations where senders send us messages ending with a NUL character. It is now simply removed. This also caused trailing LF reduction to fail, when it was followed by such a NUL. This is now also handled. - replaced some non-thread-safe function calls by their thread-safe counterparts - fixed a minor memory leak that occurred when the %APPNAME% property was used (I think nobody used that in practice) - fixed a bug that caused signal handlers in cvthname() not to be restored when a malicious pointer record was detected and processing of the message been stopped for that reason (this should be really rare and can not be related to the segfault bug we are hunting). - fixed a bug in cvthname that lead to passing a wrong parameter - in practice, this had no impact. - general code cleanup (e.g. compiler warnings, comments) --------------------------------------------------------------------------- Version 1.19.6 (rgerhards), 2007-09-11 - applied patch by varmojfekoj to change signal handling to the new sigaction API set (replacing the depreciated signal() calls and its friends. - fixed a bug that in --enable-debug mode caused an assertion when the discard action was used - cleaned up compiler warnings - applied patch by varmojfekoj to FIX a bug that could cause segfaults if empty properties were processed using modifying options (e.g. space-cc, drop-cc) - fixed man bug: rsyslogd supports -l option --------------------------------------------------------------------------- Version 1.19.5 (rgerhards), 2007-09-07 - changed part of the CStr interface so that better error tracking is provided and the calling sequence is more intuitive (there were invalid calls based on a too-weird interface) - (hopefully) fixed some remaining bugs rooted in wrong use of the CStr class. These could lead to program abort. - applied patch by varmojfekoj two fix two potential segfault situations - added $ModDir config directive - modified $ModLoad so that an absolute path may be specified as module name (e.g. /rsyslog/ommysql.so) --------------------------------------------------------------------------- Version 1.19.4 (rgerhards/varmojfekoj), 2007-09-04 - fixed a number of small memory leaks - thanks varmojfekoj for patching - fixed an issue with CString class that could lead to rsyslog abort in tplToString() - thanks varmojfekoj for patching - added a man-version of the config file documentation - thanks to Michel Samia for providing the man file - fixed bug: a template like this causes an infinite loop: $template opts,"%programname:::a,b%" thanks varmojfekoj for the patch - fixed bug: case changing options crash freeing the string pointer because they modify it: $template opts2,"%programname::1:lowercase%" thanks varmojfekoj for the patch --------------------------------------------------------------------------- Version 1.19.3 (mmeckelein/varmojfekoj), 2007-08-31 - small mem leak fixed (after calling parseSelectorAct) - Thx varmojfekoj - documentation section "Regular File" und "Blocks" updated - solved an issue with dynamic file generation - Once again many thanks to varmojfekoj - the negative selector for program name filter (Blocks) does not work as expected - Thanks varmojfekoj for patching - added forwarding information to sysklogd (requires special template) to config doc --------------------------------------------------------------------------- Version 1.19.2 (mmeckelein/varmojfekoj), 2007-08-28 - a specifically formed message caused a segfault - Many thanks varmojfekoj for providing a patch - a typo and a weird condition are fixed in msg.c - Thanks again varmojfekoj - on file creation the file was always owned by root:root. This is fixed now - Thanks ypsa for solving this issue --------------------------------------------------------------------------- Version 1.19.1 (mmeckelein), 2007-08-22 - a bug that caused a high load when a TCP/UDP connection was closed is fixed now - Thanks mildew for solving this issue - fixed a bug which caused a segfault on reinit - Thx varmojfekoj for the patch - changed the hardcoded module path "/lib/rsyslog" to $(pkglibdir) in order to avoid trouble e.g. on 64 bit platforms (/lib64) - many thanks Peter Vrabec and darix, both provided a patch for solving this issue - enhanced the unloading of modules - thanks again varmojfekoj - applied a patch from varmojfekoj which fixes various little things in MySQL output module --------------------------------------------------------------------------- Version 1.19.0 (varmojfekoj/rgerhards), 2007-08-16 - integrated patch from varmojfekoj to make the mysql module a loadable one many thanks for the patch, MUCH appreciated --------------------------------------------------------------------------- Version 1.18.2 (rgerhards), 2007-08-13 - fixed a bug in outchannel code that caused templates to be incorrectly parsed - fixed a bug in ommysql that caused a wrong ";template" missing message - added some code for unloading modules; not yet fully complete (and we do not yet have loadable modules, so this is no problem) - removed debian subdirectory by request of a debian packager (this is a special subdir for debian and there is also no point in maintaining it when there is a debian package available - so I gladly did this) in some cases - improved overall doc quality (some pages were quite old) and linked to more of the online resources. - improved /contrib/delete_mysql script by adding a host option and some other minor modifications --------------------------------------------------------------------------- Version 1.18.1 (rgerhards), 2007-08-08 - applied a patch from varmojfekoj which solved a potential segfault of rsyslogd on HUP - applied patch from Michel Samia to fix compilation when the pthreads feature is disabled - some code cleanup (moved action object to its own file set) - add config directive $MainMsgQueueSize, which now allows one to configure the queue size dynamically - all compile-time settings are now shown in rsyslogd -v, not just the active ones - enhanced performance a little bit more - added config file directive $ActionResumeInterval - fixed a bug that prevented compilation under debian sid - added a contrib directory for user-contributed useful things --------------------------------------------------------------------------- Version 1.18.0 (rgerhards), 2007-08-03 - rsyslog now supports fallback actions when an action did not work. This is a great feature e.g. for backup database servers or backup syslog servers - modified rklogd to only change the console log level if -c is specified - added feature to use multiple actions inside a single selector - implemented $ActionExecOnlyWhenPreviousIsSuspended config directive - error messages during startup are now spit out to the configured log destinations --------------------------------------------------------------------------- Version 1.17.6 (rgerhards), 2007-08-01 - continued to work on output module modularization - basic stage of this work is now FINISHED - fixed bug in OMSRcreate() - always returned SR_RET_OK - fixed a bug that caused ommysql to always complain about missing templates - fixed a mem leak in OMSRdestruct - freeing the object itself was forgotten - thanks to varmojfekoj for the patch - fixed a memory leak in syslogd/init() that happened when the config file could not be read - thanks to varmojfekoj for the patch - fixed insufficient memory allocation in addAction() and its helpers. The initial fix and idea was developed by mildew, I fine-tuned it a bit. Thanks a lot for the fix, I'd probably had pulled out my hair to find the bug... - added output of config file line number when a parsing error occurred - fixed bug in objomsr.c that caused program to abort in debug mode with an invalid assertion (in some cases) - fixed a typo that caused the default template for MySQL to be wrong. thanks to mildew for catching this. - added configuration file command $DebugPrintModuleList and $DebugPrintCfSysLineHandlerList - fixed an invalid value for the MARK timer - unfortunately, there was a testing aid left in place. This resulted in quite frequent MARK messages - added $IncludeConfig config directive - applied a patch from mildew to prevent rsyslogd from freezing under heavy load. This could happen when the queue was full. Now, we drop messages but rsyslogd remains active. --------------------------------------------------------------------------- Version 1.17.5 (rgerhards), 2007-07-30 - continued to work on output module modularization - fixed a missing file bug - thanks to Andrea Montanari for reporting this problem - fixed a problem with shutting down the worker thread and freeing the selector_t list - this caused messages to be lost, because the message queue was not properly drained before the selectors got destroyed. --------------------------------------------------------------------------- Version 1.17.4 (rgerhards), 2007-07-27 - continued to work on output module modularization - fixed a situation where rsyslogd could create zombie processes thanks to mildew for the patch - applied patch from Michel Samia to fix compilation when NOT compiled for pthreads --------------------------------------------------------------------------- Version 1.17.3 (rgerhards), 2007-07-25 - continued working on output module modularization - fixed a bug that caused rsyslogd to segfault on exit (and probably also on HUP), when there was an unsent message in a selector that required forwarding and the dns lookup failed for that selector (yes, it was pretty unlikely to happen;)) thanks to varmojfekoj for the patch - fixed a memory leak in config file parsing and die() thanks to varmojfekoj for the patch - rsyslogd now checks on startup if it is capable to perform any work at all. If it cant, it complains and terminates thanks to Michel Samia for providing the patch! - fixed a small memory leak when HUPing syslogd. The allowed sender list now gets freed. thanks to mildew for the patch. - changed the way error messages in early startup are logged. They now do no longer use the syslogd code directly but are rather send to stderr. --------------------------------------------------------------------------- Version 1.17.2 (rgerhards), 2007-07-23 - made the port part of the -r option optional. Needed for backward compatibility with sysklogd - replaced system() calls with something more reasonable. Please note that this might break compatibility with some existing configuration files. We accept this in favor of the gained security. - removed a memory leak that could occur if timegenerated was used in RFC 3164 format in templates - did some preparation in msg.c for advanced multithreading - placed the hooks, but not yet any active code - worked further on modularization - added $ModLoad MySQL (dummy) config directive - added DropTrailingLFOnReception config directive --------------------------------------------------------------------------- Version 1.17.1 (rgerhards), 2007-07-20 - fixed a bug that caused make install to install rsyslogd and rklogd under the wrong names - fixed bug that caused $AllowedSenders to handle IPv6 scopes incorrectly; also fixed but that could garble $AllowedSender wildcards. Thanks to mildew@gmail.com for the patch - minor code cleanup - thanks to Peter Vrabec for the patch - fixed minimal memory leak on HUP (caused by templates) thanks to varmojfekoj for the patch - fixed another memory leak on HUPing and on exiting rsyslogd again thanks to varmojfekoj for the patch - code cleanup (removed compiler warnings) - fixed portability bug in configure.ac - thanks to Bartosz Kuźma for patch - moved msg object into its own file set - added the capability to continue trying to write log files when the file system is full. Functionality based on patch by Martin Schulze to sysklogd package. --------------------------------------------------------------------------- Version 1.17.0 (RGer), 2007-07-17 - added $RepeatedLineReduction config parameter - added $EscapeControlCharactersOnReceive config parameter - added $ControlCharacterEscapePrefix config parameter - added $DirCreateMode config parameter - added $CreateDirs config parameter - added $DebugPrintTemplateList config parameter - added $ResetConfigVariables config parameter - added $FileOwner config parameter - added $FileGroup config parameter - added $DirOwner config parameter - added $DirGroup config parameter - added $FailOnChownFailure config parameter - added regular expression support to the filter engine thanks to Michel Samia for providing the patch! - enhanced $AllowedSender functionality. Credits to mildew@gmail.com for the patch doing that - added IPv6 support - allowed DNS hostnames - allowed DNS wildcard names - added new option $DropMsgsWithMaliciousDnsPTRRecords - added autoconf so that rfc3195d, rsyslogd and klogd are stored to /sbin - added capability to auto-create directories with dynaFiles --------------------------------------------------------------------------- Version 1.16.0 (RGer/Peter Vrabec), 2007-07-13 - The Friday, 13th Release ;) - build system switched to autotools - removed SYSV preprocessor macro use, replaced with autotools equivalents - fixed a bug that caused rsyslogd to segfault when TCP listening was disabled and it terminated - added new properties "syslogfacility-text" and "syslogseverity-text" thanks to varmojfekoj for the patch - added the -x option to disable hostname dns resolution thanks to varmojfekoj for the patch - begun to better modularize syslogd.c - this is an ongoing project; moved type definitions to a separate file - removed some now-unused fields from struct filed - move file size limit fields in struct field to the "right spot" (the file writing part of the union - f_un.f_file) - subdirectories linux and solaris are no longer part of the distribution package. This is not because we cease support for them, but there are no longer any files in them after the move to autotools --------------------------------------------------------------------------- Version 1.15.1 (RGer), 2007-07-10 - fixed a bug that caused a dynaFile selector to stall when there was an open error with one file - improved template processing for dynaFiles; templates are now only looked up during initialization - speeds up processing - optimized memory layout in struct filed when compiled with MySQL support - fixed a bug that caused compilation without SYSLOG_INET to fail - re-enabled the "last message repeated n times" feature. This feature was not taken care of while rsyslogd evolved from sysklogd and it was more or less defunct. Now it is fully functional again. - added system properties: $NOW, $YEAR, $MONTH, $DAY, $HOUR, $MINUTE - fixed a bug in iovAsString() that caused a memory leak under stress conditions (most probably memory shortage). This was unlikely to ever happen, but it doesn't hurt doing it right - cosmetic: defined type "uchar", change all unsigned chars to uchar --------------------------------------------------------------------------- Version 1.15.0 (RGer), 2007-07-05 - added ability to dynamically generate file names based on templates and thus properties. This was a much-requested feature. It makes life easy when it e.g. comes to splitting files based on the sender address. - added $umask and $FileCreateMode config file directives - applied a patch from Bartosz Kuzma to compile cleanly under NetBSD - checks for extra (unexpected) characters in system config file lines have been added - added IPv6 documentation - was accidentally missing from CVS - begun to change char to unsigned char --------------------------------------------------------------------------- Version 1.14.2 (RGer), 2007-07-03 ** this release fixes all known nits with IPv6 ** - restored capability to do /etc/service lookup for "syslog" service when -r 0 was given - documented IPv6 handling of syslog messages - integrate patch from Bartosz Kuźma to make rsyslog compile under Solaris again (the patch replaced a strndup() call, which is not available under Solaris - improved debug logging when waiting on select - updated rsyslogd man page with new options (-46A) --------------------------------------------------------------------------- Version 1.14.1 (RGer/Peter Vrabec), 2007-06-29 - added Peter Vrabec's patch for IPv6 TCP - prefixed all messages send to stderr in rsyslogd with "rsyslogd: " --------------------------------------------------------------------------- Version 1.14.0 (RGer/Peter Vrabec), 2007-06-28 - Peter Vrabec provided IPv6 for rsyslog, so we are now IPv6 enabled IPv6 Support is currently for UDP only, TCP is to come soon. AllowedSender configuration does not yet work for IPv6. - fixed code in iovCreate() that broke C's strict aliasing rules - fixed some char/unsigned char differences that forced the compiler to spit out warning messages - updated the Red Hat init script to fix a known issue (thanks to Peter Vrabec) --------------------------------------------------------------------------- Version 1.13.5 (RGer), 2007-06-22 - made the TCP session limit configurable via command line switch now -t , - added man page for rklogd(8) (basically a copy from klogd, but now there is one...) - fixed a bug that caused internal messages (e.g. rsyslogd startup) to appear without a tag. - removed a minor memory leak that occurred when TAG processing requalified a HOSTNAME to be a TAG (and a TAG already was set). - removed potential small memory leaks in MsgSet***() functions. There would be a leak if a property was re-set, something that happened extremely seldom. --------------------------------------------------------------------------- Version 1.13.4 (RGer), 2007-06-18 - added a new property "PRI-text", which holds the PRI field in textual form (e.g. "syslog.info") - added alias "syslogseverity" for "syslogpriority", which is a misleading property name that needs to stay for historical reasons (and backward-compatibility) - added doc on how to record PRI value in log file - enhanced signal handling in klogd, including removal of an unsafe call to the logging system during signal handling --------------------------------------------------------------------------- Version 1.13.3 (RGer), 2007-06-15 - create a version of syslog.c from scratch. This is now - highly optimized for rsyslog - removes an incompatible license problem as the original version had a BSD license with advertising clause - fixed in the regard that rklogd will continue to work when rsyslogd has been restarted (the original version, as well as sysklogd, will remain silent then) - solved an issue with an extra NUL char at message end that the original version had - applied some changes to klogd to care for the new interface - fixed a bug in syslogd.c which prevented compiling under debian --------------------------------------------------------------------------- Version 1.13.2 (RGer), 2007-06-13 - lib order in makefile patched to facilitate static linking - thanks to Bennett Todd for providing the patch - Integrated a patch from Peter Vrabec (pvrabec@redhat.com): - added klogd under the name of rklogd (remove dependency on original sysklogd package - createDB.sql now in UTF - added additional config files for use on Red Hat --------------------------------------------------------------------------- Version 1.13.1 (RGer), 2007-02-05 - changed the listen backlog limit to a more reasonable value based on the maximum number of TCP connections configured (10% + 5) - thanks to Guy Standen for the hint (actually, the limit was 5 and that was a left-over from early testing). - fixed a bug in makefile which caused DB-support to be disabled when NETZIP support was enabled - added the -e option to allow transmission of every message to remote hosts (effectively turns off duplicate message suppression) - (somewhat) improved memory consumption when compiled with MySQL support - looks like we fixed an incompatibility with MySQL 5.x and above software At least in one case, the remote server name was destroyed, leading to a connection failure. The new, improved code does not have this issue and so we see this as solved (the new code is generally somewhat better, so there is a good chance we fixed this incompatibility). --------------------------------------------------------------------------- Version 1.13.0 (RGer), 2006-12-19 - added '$' as ToPos property replacer specifier - means "up to the end of the string" - property replacer option "escape-cc", "drop-cc" and "space-cc" added - changed the handling of \0 characters inside syslog messages. We now consistently escape them to "#000". This is somewhat recommended in the draft-ietf-syslog-protocol-19 draft. While the real recommendation is to not escape any characters at all, we can not do this without considerable modification of the code. So we escape it to "#000", which is consistent with a sample found in the Internet-draft. - removed message glue logic (see printchopped() comment for details) Also caused removal of parts table and thus some improvements in memory usage. - changed the default MAXLINE to 2048 to take care of recent syslog standardization efforts (can easily be changed in syslogd.c) - added support for byte-counted TCP syslog messages (much like syslog-transport-tls-05 Internet Draft). This was necessary to support compression over TCP. - added support for receiving compressed syslog messages - added support for sending compressed syslog messages - fixed a bug where the last message in a syslog/tcp stream was lost if it was not properly terminated by a LF character --------------------------------------------------------------------------- Version 1.12.3 (RGer), 2006-10-04 - implemented some changes to support Solaris (but support is not yet complete) - commented out (via #if 0) some methods that are currently not being use but should be kept for further us - added (interim) -u 1 option to turn off hostname and tag parsing - done some modifications to better support Fedora - made the field delimiter inside property replace configurable via template - fixed a bug in property replacer: if fields were used, the delimitor became part of the field. Up until now, this was barely noticeable as the delimiter as TAB only and thus invisible to a human. With other delimiters available now, it quickly showed up. This bug fix might cause some grief to existing installations if they used the extra TAB for whatever reasons - sorry folks... Anyhow, a solution is easy: just add a TAB character constant into your template. Thus, there has no attempt been made to do this in a backwards-compatible way. --------------------------------------------------------------------------- Version 1.12.2 (RGer), 2006-02-15 - fixed a bug in the RFC 3339 date formatter. An extra space was added after the actual timestamp - added support for providing high-precision RFC3339 timestamps for (rsyslogd-)internally-generated messages - very (!) experimental support for syslog-protocol internet draft added (the draft is experimental, the code is solid ;)) - added support for field-extracting in the property replacer - enhanced the legacy-syslog parser so that it can interpret messages that do not contain a TIMESTAMP - fixed a bug that caused the default socket (usually /dev/log) to be opened even when -o command line option was given - fixed a bug in the Debian sample startup script - it caused rsyslogd to listen to remote requests, which it shouldn't by default --------------------------------------------------------------------------- Version 1.12.1 (RGer), 2005-11-23 - made multithreading work with BSD. Some signal-handling needed to be restructured. Also, there might be a slight delay of up to 10 seconds when huping and terminating rsyslogd under BSD - fixed a bug where a NULL-pointer was passed to printf() in logmsg(). - fixed a bug during "make install" where rc3195d was not installed Thanks to Bennett Todd for spotting this. - fixed a bug where rsyslogd dumped core when no TAG was found in the received message - enhanced message parser so that it can deal with missing hostnames in many cases (may not be totally fail-safe) - fixed a bug where internally-generated messages did not have the correct TAG --------------------------------------------------------------------------- Version 1.12.0 (RGer), 2005-10-26 - moved to a multi-threaded design. single-threading is still optionally available. Multi-threading is experimental! - fixed a potential race condition. In the original code, marking was done by an alarm handler, which could lead to all sorts of bad things. This has been changed now. See comments in syslogd.c/domark() for details. - improved debug output for property-based filters - not a code change, but: I have checked all exit()s to make sure that none occurs once rsyslogd has started up. Even in unusual conditions (like low-memory conditions) rsyslogd somehow remains active. Of course, it might loose a message or two, but at least it does not abort and it can also recover when the condition no longer persists. - fixed a bug that could cause loss of the last message received immediately before rsyslogd was terminated. - added comments on thread-safety of global variables in syslogd.c - fixed a small bug: spurios printf() when TCP syslog was used - fixed a bug that causes rsyslogd to dump core on termination when one of the selector lines did not receive a message during the run (very unlikely) - fixed an one-too-low memory allocation in the TCP sender. Could result in rsyslogd dumping core. - fixed a bug with regular expression support (thanks to Andres Riancho) - a little bit of code restructuring (especially main(), which was horribly large) --------------------------------------------------------------------------- Version 1.11.1 (RGer), 2005-10-19 - support for BSD-style program name and host blocks - added a new property "programname" that can be used in templates - added ability to specify listen port for rfc3195d - fixed a bug that rendered the "startswith" comparison operation unusable. - changed more functions to "static" storage class to help compiler optimize (should have been static in the first place...) - fixed a potential memory leak in the string buffer class destructor. As the destructor was previously never called, the leak did not actually appear. - some internal restructuring in anticipation/preparation of minimal multi-threading support - rsyslogd still shares some code with the sysklogd project. Some patches for this shared code have been brought over from the sysklogd CVS. --------------------------------------------------------------------------- Version 1.11.0 (RGer), 2005-10-12 - support for receiving messages via RFC 3195; added rfc3195d for that purpose - added an additional guard to prevent rsyslogd from aborting when the 2gb file size limit is hit. While a user can configure rsyslogd to handle such situations, it would abort if that was not done AND large file support was not enabled (ok, this is hopefully an unlikely scenario) - fixed a bug that caused additional Unix domain sockets to be incorrectly processed - could lead to message loss in extreme cases --------------------------------------------------------------------------- Version 1.10.2 (RGer), 2005-09-27 - added comparison operations in property-based filters: * isequal * startswith - added ability to negate all property-based filter comparison operations by adding a !-sign right in front of the operation name - added the ability to specify remote senders for UDP and TCP received messages. Allows to block all but well-known hosts - changed the $-config line directives to be case-INsensitive - new command line option -w added: "do not display warnings if messages from disallowed senders are received" - fixed a bug that caused rsyslogd to dump core when the compare value was not quoted in property-based filters - fixed a bug in the new CStr compare function which lead to invalid results (fortunately, this function was not yet used widely) - added better support for "debugging" rsyslog.conf property filters (only if -d switch is given) - changed some function definitions to static, which eventually enables some compiler optimizations - fixed a bug in MySQL code; when a SQL error occurred, rsyslogd could run in a tight loop. This was due to invalid sequence of error reporting and is now fixed. --------------------------------------------------------------------------- Version 1.10.1 (RGer), 2005-09-23 - added the ability to execute a shell script as an action. Thanks to Bjoern Kalkbrenner for providing the code! - fixed a bug in the MySQL code; due to the bug the automatic one-time retry after an error did not happen - this lead to error message in cases where none should be seen (e.g. after a MySQL restart) - fixed a security issue with SQL-escaping in conjunction with non-(SQL-)standard MySQL features. --------------------------------------------------------------------------- Version 1.10.0 (RGer), 2005-09-20 REMINDER: 1.10 is the first unstable version if the 1.x series! - added the capability to filter on any property in selector lines (not just facility and priority) - changed stringbuf into a new counted string class - added support for a "discard" action. If a selector line with discard (~ character) is found, no selector lines *after* that line will be processed. - thanks to Andres Riancho, regular expression support has been added to the template engine - added the FROMHOST property in the template processor, which could previously not be obtained. Thanks to Cristian Testa for pointing this out and even providing a fix. - added display of compile-time options to -v output - performance improvement for production build - made some checks to happen only during debug mode - fixed a problem with compiling on SUSE and - while doing so - removed the socket call to set SO_BSDCOMPAT in cases where it is obsolete. --------------------------------------------------------------------------- Version 1.0.4 (RGer), 2006-02-01 - a small but important fix: the tcp receiver had two forgotten printf's in it that caused a lot of unnecessary output to stdout. This was important enough to justify a new release --------------------------------------------------------------------------- Version 1.0.3 (RGer), 2005-11-14 - added an additional guard to prevent rsyslogd from aborting when the 2gb file size limit is hit. While a user can configure rsyslogd to handle such situations, it would abort if that was not done AND large file support was not enabled (ok, this is hopefully an unlikely scenario) - fixed a bug that caused additional Unix domain sockets to be incorrectly processed - could lead to message loss in extreme cases - applied some patches available from the sysklogd project to code shared from there - fixed a bug that causes rsyslogd to dump core on termination when one of the selector lines did not receive a message during the run (very unlikely) - fixed an one-too-low memory allocation in the TCP sender. Could result in rsyslogd dumping core. - fixed a bug in the TCP sender that caused the retry logic to fail after an error or receiver overrun - fixed a bug in init() that could lead to dumping core - fixed a bug that could lead to dumping core when no HOSTNAME or no TAG was present in the syslog message --------------------------------------------------------------------------- Version 1.0.2 (RGer), 2005-10-05 - fixed an issue with MySQL error reporting. When an error occurred, the MySQL driver went into an endless loop (at least in most cases). --------------------------------------------------------------------------- Version 1.0.1 (RGer), 2005-09-23 - fixed a security issue with SQL-escaping in conjunction with non-(SQL-)standard MySQL features. --------------------------------------------------------------------------- Version 1.0.0 (RGer), 2005-09-12 - changed install doc to cover daily cron scripts - a trouble source - added rc script for slackware (provided by Chris Elvidge - thanks!) - fixed a really minor bug in usage() - the -r option was still reported as without the port parameter --------------------------------------------------------------------------- Version 0.9.8 (RGer), 2005-09-05 - made startup and shutdown message more consistent and included the pid, so that they can be easier correlated. Used syslog-protocol structured data format for this purpose. - improved config info in startup message, now tells not only if it is listening remote on udp, but also for tcp. Also includes the port numbers. The previous startup message was misleading, because it did not say "remote reception" if rsyslogd was only listening via tcp (but not via udp). - added a "how can you help" document to the doc set --------------------------------------------------------------------------- Version 0.9.7 (RGer), 2005-08-15 - some of the previous doc files (like INSTALL) did not properly reflect the changes to the build process and the new doc. Fixed that. - changed syslogd.c so that when compiled without database support, an error message is displayed when a database action is detected in the config file (previously this was used as an user rule ;)) - fixed a bug in the os-specific Makefiles which caused MySQL support to not be compiled, even if selected --------------------------------------------------------------------------- Version 0.9.6 (RGer), 2005-08-09 - greatly enhanced documentation. Now available in html format in the "doc" folder and FreeBSD. Finally includes an install howto. - improved MySQL error messages a little - they now show up as log messages, too (formerly only in debug mode) - added the ability to specify the listen port for udp syslog. WARNING: This introduces an incompatibility. Formerly, udp syslog was enabled by the -r command line option. Now, it is "-r [port]", which is consistent with the tcp listener. However, just -r will now return an error message. - added sample startup scripts for Debian and FreeBSD - added support for easy feature selection in the makefile. Un- fortunately, this also means I needed to spilt the make file for different OS and distros. There are some really bad syntax differences between FreeBSD and Linux make. --------------------------------------------------------------------------- Version 0.9.5 (RGer), 2005-08-01 - the "semicolon bug" was actually not (fully) solved in 0.9.4. One part of the bug was solved, but another still existed. This one is fixed now, too. - the "semicolon bug" actually turned out to be a more generic bug. It appeared whenever an invalid template name was given. With some selector actions, rsyslogd dumped core, with other it "just" had a small resource leak with others all worked well. These anomalies are now fixed. Note that they only appeared during system initialization once the system was running, nothing bad happened. - improved error reporting for template errors on startup. They are now shown on the console and the start-up tty. Formerly, they were only visible in debug mode. - support for multiple instances of rsyslogd on a single machine added - added new option "-o" --> omit local unix domain socket. This option enables rsyslogd NOT to listen to the local socket. This is most helpful when multiple instances of rsyslogd (or rsyslogd and another syslogd) shall run on a single system. - added new option "-i " which allows one to specify the pidfile. This is needed when multiple instances of rsyslogd are to be run. - the new project home page is now online at www.rsyslog.com --------------------------------------------------------------------------- Version 0.9.4 (RGer), 2005-07-25 - finally added the TCP sender. It now supports non-blocking mode, no longer disabling message reception during connect. As it is now, it is usable in production. The code could be more sophisticated, but I've kept it short in anticipation of the move to liblogging, which will lead to the removal of the code just written ;) - the "exiting on signal..." message still had the "syslogd" name in it. Changed this to "rsyslogd", as we do not have a large user base yet, this should pose no problem. - fixed "the semicolon" bug. rsyslogd dumped core if a write-db action was specified but no semicolon was given after the password (an empty template was ok, but the semicolon needed to be present). - changed a default for traditional output format. During testing, it was seen that the timestamp written to file in default format was the time of message reception, not the time specified in the TIMESTAMP field of the message itself. Traditionally, the message TIMESTAMP is used and this has been changed now. --------------------------------------------------------------------------- Version 0.9.3 (RGer), 2005-07-19 - fixed a bug in the message parser. In June, the RFC 3164 timestamp was not correctly parsed (yes, only in June and some other months, see the code comment to learn why...) - added the ability to specify the destination port when forwarding syslog messages (both for TCP and UDP) - added an very experimental TCP sender (activated by @@machine:port in config). This is not yet for production use. If the receiver is not alive, rsyslogd will wait quite some time until the connection request times out, which most probably leads to loss of incoming messages. --------------------------------------------------------------------------- Version 0.9.2 (RGer), around 2005-07-06 - I intended to change the maxsupported message size to 32k to support IHE - but given the memory inefficiency in the usual use cases, I have not done this. I have, however, included very specific instructions on how to do this in the source code. I have also done some testing with 32k messages, so you can change the max size without taking too much risk. - added a syslog/tcp receiver; we now can receive messages via plain tcp, but we can still send only via UDP. The syslog/tcp receiver is the primary enhancement of this release. - slightly changed some error messages that contained a spurios \n at the end of the line (which gives empty lines in your log...) --------------------------------------------------------------------------- Version 0.9.1 (RGer) - fixed code so that it compiles without errors under FreeBSD - removed now unused function "allocate_log()" from syslogd.c - changed the make file so that it contains more defines for different environments (in the long term, we need a better system for disabling/enabling features...) - changed some printf's printing off_t types to %lld and explicit (long long) casts. I tried to figure out the exact type, but did not succeed in this. In the worst case, ultra-large peta- byte files will now display funny informational messages on rollover, something I think we can live with for the neersion 3.11.2 (rgerhards), 2008-02-?? --------------------------------------------------------------------------- Version 3.11.1 (rgerhards), 2008-02-12 - SNMP trap sender added thanks to Andre Lorbach (omsnmp) - added input-plugin interface specification in form of a (copy) template input module - applied documentation fix by Michael Biebl -- many thanks! - bugfix: immark did not have MARK flags set... - added x-info field to rsyslogd startup/shutdown message. Hopefully points users to right location for further info (many don't even know they run rsyslog ;)) - bugfix: trailing ":" of tag was lost while parsing legacy syslog messages without timestamp - thanks to Anders Blomdell for providing a patch! - fixed a bug in stringbuf.c related to STRINGBUF_TRIM_ALLOCSIZE, which wasn't supposed to be used with rsyslog. Put a warning message up that tells this feature is not tested and probably not worth the effort. Thanks to Anders Blomdell fro bringing this to our attention - somewhat improved performance of string buffers - fixed bug that caused invalid treatment of tabs (HT) in rsyslog.conf - bugfix: setting for $EscapeControlCharactersOnReceive was not properly initialized - clarified usage of space-cc property replacer option - improved abort diagnostic handler - some initial effort for malloc/free runtime debugging support - bugfix: using dynafile actions caused rsyslogd abort - fixed minor man errors thanks to Michael Biebl --------------------------------------------------------------------------- Version 3.11.0 (rgerhards), 2008-01-31 - implemented queued actions - implemented simple rate limiting for actions - implemented deliberate discarding of lower priority messages over higher priority ones when a queue runs out of space - implemented disk quotas for disk queues - implemented the $ActionResumeRetryCount config directive - added $ActionQueueFilename config directive - added $ActionQueueSize config directive - added $ActionQueueHighWaterMark config directive - added $ActionQueueLowWaterMark config directive - added $ActionQueueDiscardMark config directive - added $ActionQueueDiscardSeverity config directive - added $ActionQueueCheckpointInterval config directive - added $ActionQueueType config directive - added $ActionQueueWorkerThreads config directive - added $ActionQueueTimeoutshutdown config directive - added $ActionQueueTimeoutActionCompletion config directive - added $ActionQueueTimeoutenQueue config directive - added $ActionQueueTimeoutworkerThreadShutdown config directive - added $ActionQueueWorkerThreadMinimumMessages config directive - added $ActionQueueMaxFileSize config directive - added $ActionQueueSaveonShutdown config directive - addded $ActionQueueDequeueSlowdown config directive - addded $MainMsgQueueDequeueSlowdown config directive - bugfix: added forgotten docs to package - improved debugging support - fixed a bug that caused $MainMsgQueueCheckpointInterval to work incorrectly - when a long-running action needs to be cancelled on shutdown, the message that was processed by it is now preserved. This finishes support for guaranteed delivery of messages (if the output supports it, of course) - fixed bug in output module interface, see http://sourceforge.net/tracker/index.php?func=detail&aid=1881008&group_id=123448&atid=696552 - changed the ommysql output plugin so that the (lengthy) connection initialization now takes place in message processing. This works much better with the new queued action mode (fast startup) - fixed a bug that caused a potential hang in file and fwd output module varmojfekoj provided the patch - many thanks! - bugfixed stream class offset handling on 32bit platforms --------------------------------------------------------------------------- Version 3.10.3 (rgerhards), 2008-01-28 - fixed a bug with standard template definitions (not a big deal) - thanks to varmojfekoj for spotting it - run-time instrumentation added - implemented disk-assisted queue mode, which enables on-demand disk spooling if the queue's in-memory queue is exhausted - implemented a dynamic worker thread pool for processing incoming messages; workers are started and shut down as need arises - implemented a run-time instrumentation debug package - implemented the $MainMsgQueueSaveOnShutdown config directive - implemented the $MainMsgQueueWorkerThreadMinimumMessages config directive - implemented the $MainMsgQueueTimeoutWorkerThreadShutdown config directive --------------------------------------------------------------------------- Version 3.10.2 (rgerhards), 2008-01-14 - added the ability to keep stop rsyslogd without the need to drain the main message queue. In disk queue mode, rsyslog continues to run from the point where it stopped. In case of a system failure, it continues to process messages from the last checkpoint. - fixed a bug that caused a segfault on startup when no $WorkDir directive was specified in rsyslog.conf - provided more fine-grain control over shutdown timeouts and added a way to specify the enqueue timeout when the main message queue is full - implemented $MainMsgQueueCheckpointInterval config directive - implemented $MainMsgQueueTimeoutActionCompletion config directive - implemented $MainMsgQueueTimeoutEnqueue config directive - implemented $MainMsgQueueTimeoutShutdown config directive --------------------------------------------------------------------------- Version 3.10.1 (rgerhards), 2008-01-10 - implemented the "disk" queue mode. However, it currently is of very limited use, because it does not support persistence over rsyslogd runs. So when rsyslogd is stopped, the queue is drained just as with the in-memory queue modes. Persistent queues will be a feature of the next release. - performance-optimized string class, should bring an overall improvement - fixed a memory leak in imudp -- thanks to varmojfekoj for the patch - fixed a race condition that could lead to a rsyslogd hang when during HUP or termination - done some doc updates - added $WorkDirectory config directive - added $MainMsgQueueFileName config directive - added $MainMsgQueueMaxFileSize config directive --------------------------------------------------------------------------- Version 3.10.0 (rgerhards), 2008-01-07 - implemented input module interface and initial input modules - enhanced threading for input modules (each on its own thread now) - ability to bind UDP listeners to specific local interfaces/ports and ability to run multiple of them concurrently - added ability to specify listen IP address for UDP syslog server - license changed to GPLv3 - mark messages are now provided by loadble module immark - rklogd is no longer provided. Its functionality has now been taken over by imklog, a loadable input module. This offers a much better integration into rsyslogd and makes sure that the kernel logger process is brought up and down at the appropriate times - enhanced $IncludeConfig directive to support wildcard characters (thanks to Michael Biebl) - all inputs are now implemented as loadable plugins - enhanced threading model: each input module now runs on its own thread - enhanced message queue which now supports different queueing methods (among others, this can be used for performance fine-tuning) - added a large number of new configuration directives for the new input modules - enhanced multi-threading utilizing a worker thread pool for the main message queue - compilation without pthreads is no longer supported - much cleaner code due to new objects and removal of single-threading mode --------------------------------------------------------------------------- Version 2.0.1 STABLE (rgerhards), 2008-01-24 - fixed a bug in integer conversion - but this function was never called, so it is not really a useful bug fix ;) - fixed a bug with standard template definitions (not a big deal) - thanks to varmojfekoj for spotting it - fixed a bug that caused a potential hang in file and fwd output module varmojfekoj provided the patch - many thanks! --------------------------------------------------------------------------- Version 2.0.0 STABLE (rgerhards), 2008-01-02 - re-release of 1.21.2 as STABLE with no modifications except some doc updates --------------------------------------------------------------------------- Version 1.21.2 (rgerhards), 2007-12-28 - created a gss-api output module. This keeps GSS-API code and TCP/UDP code separated. It is also important for forward- compatibility with v3. Please note that this change breaks compatibility with config files created for 1.21.0 and 1.21.1 - this was considered acceptable. - fixed an error in forwarding retry code (could lead to message corruption but surfaced very seldom) - increased portability for older platforms (AI_NUMERICSERV moved) - removed socket leak in omfwd.c - cross-platform patch for GSS-API compile problem on some platforms thanks to darix for the patch! --------------------------------------------------------------------------- Version 1.21.1 (rgerhards), 2007-12-23 - small doc fix for $IncludeConfig - fixed a bug in llDestroy() - bugfix: fixing memory leak when message queue is full and during parsing. Thanks to varmojfekoj for the patch. - bugfix: when compiled without network support, unix sockets were not properly closed - bugfix: memory leak in cfsysline.c/doGetWord() fixed --------------------------------------------------------------------------- Version 1.21.0 (rgerhards), 2007-12-19 - GSS-API support for syslog/TCP connections was added. Thanks to varmojfekoj for providing the patch with this functionality - code cleanup - enhanced $IncludeConfig directive to support wildcard filenames - changed some multithreading synchronization --------------------------------------------------------------------------- Version 1.20.1 (rgerhards), 2007-12-12 - corrected a debug setting that survived release. Caused TCP connections to be retried unnecessarily often. - When a hostname ACL was provided and DNS resolution for that name failed, ACL processing was stopped at that point. Thanks to mildew for the patch. Fedora Bugzilla: http://bugzilla.redhat.com/show_bug.cgi?id=395911 - fixed a potential race condition, see link for details: http://rgerhards.blogspot.com/2007/12/rsyslog-race-condition.html Note that the probability of problems from this bug was very remote - fixed a memory leak that happened when PostgreSQL date formats were used --------------------------------------------------------------------------- Version 1.20.0 (rgerhards), 2007-12-07 - an output module for postgres databases has been added. Thanks to sur5r for contributing this code - unloading dynamic modules has been cleaned up, we now have a real implementation and not just a dummy "good enough for the time being". - enhanced platform independence - thanks to Bartosz Kuzma and Michael Biebl for their very useful contributions - some general code cleanup (including warnings on 64 platforms, only) --------------------------------------------------------------------------- Version 1.19.12 (rgerhards), 2007-12-03 - cleaned up the build system (thanks to Michael Biebl for the patch) - fixed a bug where ommysql was still not compiled with -pthread option --------------------------------------------------------------------------- Version 1.19.11 (rgerhards), 2007-11-29 - applied -pthread option to build when building for multi-threading mode hopefully solves an issue with segfaulting --------------------------------------------------------------------------- Version 1.19.10 (rgerhards), 2007-10-19 - introduced the new ":modulename:" syntax for calling module actions in selector lines; modified ommysql to support it. This is primarily an aid for further modules and a prerequisite to actually allow third party modules to be created. - minor fix in slackware startup script, "-r 0" is now "-r0" - updated rsyslogd doc set man page; now in html format - undid creation of a separate thread for the main loop -- this did not turn out to be needed or useful, so reduce complexity once again. - added doc fixes provided by Michael Biebl - thanks --------------------------------------------------------------------------- Version 1.19.9 (rgerhards), 2007-10-12 - now packaging system which again contains all components in a single tarball - modularized main() a bit more, resulting in less complex code - experimentally added an additional thread - will see if that affects the segfault bug we experience on some platforms. Note that this change is scheduled to be removed again later. --------------------------------------------------------------------------- Version 1.19.8 (rgerhards), 2007-09-27 - improved repeated message processing - applied patch provided by varmojfekoj to support building ommysql in its own way (now also resides in a plugin subdirectory); ommysql is now a separate package - fixed a bug in cvthname() that lead to message loss if part of the source hostname would have been dropped - created some support for distributing ommysql together with the main rsyslog package. I need to re-think it in the future, but for the time being the current mode is best. I now simply include one additional tarball for ommysql inside the main distribution. I look forward to user feedback on how this should be done best. In the long term, a separate project should be spawend for ommysql, but I'd like to do that only after the plugin interface is fully stable (what it is not yet). --------------------------------------------------------------------------- Version 1.19.7 (rgerhards), 2007-09-25 - added code to handle situations where senders send us messages ending with a NUL character. It is now simply removed. This also caused trailing LF reduction to fail, when it was followed by such a NUL. This is now also handled. - replaced some non-thread-safe function calls by their thread-safe counterparts - fixed a minor memory leak that occurred when the %APPNAME% property was used (I think nobody used that in practice) - fixed a bug that caused signal handlers in cvthname() not to be restored when a malicious pointer record was detected and processing of the message been stopped for that reason (this should be really rare and can not be related to the segfault bug we are hunting). - fixed a bug in cvthname that lead to passing a wrong parameter - in practice, this had no impact. - general code cleanup (e.g. compiler warnings, comments) --------------------------------------------------------------------------- Version 1.19.6 (rgerhards), 2007-09-11 - applied patch by varmojfekoj to change signal handling to the new sigaction API set (replacing the depreciated signal() calls and its friends. - fixed a bug that in --enable-debug mode caused an assertion when the discard action was used - cleaned up compiler warnings - applied patch by varmojfekoj to FIX a bug that could cause segfaults if empty properties were processed using modifying options (e.g. space-cc, drop-cc) - fixed man bug: rsyslogd supports -l option --------------------------------------------------------------------------- Version 1.19.5 (rgerhards), 2007-09-07 - changed part of the CStr interface so that better error tracking is provided and the calling sequence is more intuitive (there were invalid calls based on a too-weird interface) - (hopefully) fixed some remaining bugs rooted in wrong use of the CStr class. These could lead to program abort. - applied patch by varmojfekoj two fix two potential segfault situations - added $ModDir config directive - modified $ModLoad so that an absolute path may be specified as module name (e.g. /rsyslog/ommysql.so) --------------------------------------------------------------------------- Version 1.19.4 (rgerhards/varmojfekoj), 2007-09-04 - fixed a number of small memory leaks - thanks varmojfekoj for patching - fixed an issue with CString class that could lead to rsyslog abort in tplToString() - thanks varmojfekoj for patching - added a man-version of the config file documentation - thanks to Michel Samia for providing the man file - fixed bug: a template like this causes an infinite loop: $template opts,"%programname:::a,b%" thanks varmojfekoj for the patch - fixed bug: case changing options crash freeing the string pointer because they modify it: $template opts2,"%programname::1:lowercase%" thanks varmojfekoj for the patch --------------------------------------------------------------------------- Version 1.19.3 (mmeckelein/varmojfekoj), 2007-08-31 - small mem leak fixed (after calling parseSelectorAct) - Thx varmojfekoj - documentation section "Regular File" und "Blocks" updated - solved an issue with dynamic file generation - Once again many thanks to varmojfekoj - the negative selector for program name filter (Blocks) does not work as expected - Thanks varmojfekoj for patching - added forwarding information to sysklogd (requires special template) to config doc --------------------------------------------------------------------------- Version 1.19.2 (mmeckelein/varmojfekoj), 2007-08-28 - a specifically formed message caused a segfault - Many thanks varmojfekoj for providing a patch - a typo and a weird condition are fixed in msg.c - Thanks again varmojfekoj - on file creation the file was always owned by root:root. This is fixed now - Thanks ypsa for solving this issue --------------------------------------------------------------------------- Version 1.19.1 (mmeckelein), 2007-08-22 - a bug that caused a high load when a TCP/UDP connection was closed is fixed now - Thanks mildew for solving this issue - fixed a bug which caused a segfault on reinit - Thx varmojfekoj for the patch - changed the hardcoded module path "/lib/rsyslog" to $(pkglibdir) in order to avoid trouble e.g. on 64 bit platforms (/lib64) - many thanks Peter Vrabec and darix, both provided a patch for solving this issue - enhanced the unloading of modules - thanks again varmojfekoj - applied a patch from varmojfekoj which fixes various little things in MySQL output module --------------------------------------------------------------------------- Version 1.19.0 (varmojfekoj/rgerhards), 2007-08-16 - integrated patch from varmojfekoj to make the mysql module a loadable one many thanks for the patch, MUCH appreciated --------------------------------------------------------------------------- Version 1.18.2 (rgerhards), 2007-08-13 - fixed a bug in outchannel code that caused templates to be incorrectly parsed - fixed a bug in ommysql that caused a wrong ";template" missing message - added some code for unloading modules; not yet fully complete (and we do not yet have loadable modules, so this is no problem) - removed debian subdirectory by request of a debian packager (this is a special subdir for debian and there is also no point in maintaining it when there is a debian package available - so I gladly did this) in some cases - improved overall doc quality (some pages were quite old) and linked to more of the online resources. - improved /contrib/delete_mysql script by adding a host option and some other minor modifications --------------------------------------------------------------------------- Version 1.18.1 (rgerhards), 2007-08-08 - applied a patch from varmojfekoj which solved a potential segfault of rsyslogd on HUP - applied patch from Michel Samia to fix compilation when the pthreads feature is disabled - some code cleanup (moved action object to its own file set) - add config directive $MainMsgQueueSize, which now allows one to configure the queue size dynamically - all compile-time settings are now shown in rsyslogd -v, not just the active ones - enhanced performance a little bit more - added config file directive $ActionResumeInterval - fixed a bug that prevented compilation under debian sid - added a contrib directory for user-contributed useful things --------------------------------------------------------------------------- Version 1.18.0 (rgerhards), 2007-08-03 - rsyslog now supports fallback actions when an action did not work. This is a great feature e.g. for backup database servers or backup syslog servers - modified rklogd to only change the console log level if -c is specified - added feature to use multiple actions inside a single selector - implemented $ActionExecOnlyWhenPreviousIsSuspended config directive - error messages during startup are now spit out to the configured log destinations --------------------------------------------------------------------------- Version 1.17.6 (rgerhards), 2007-08-01 - continued to work on output module modularization - basic stage of this work is now FINISHED - fixed bug in OMSRcreate() - always returned SR_RET_OK - fixed a bug that caused ommysql to always complain about missing templates - fixed a mem leak in OMSRdestruct - freeing the object itself was forgotten - thanks to varmojfekoj for the patch - fixed a memory leak in syslogd/init() that happened when the config file could not be read - thanks to varmojfekoj for the patch - fixed insufficient memory allocation in addAction() and its helpers. The initial fix and idea was developed by mildew, I fine-tuned it a bit. Thanks a lot for the fix, I'd probably had pulled out my hair to find the bug... - added output of config file line number when a parsing error occurred - fixed bug in objomsr.c that caused program to abort in debug mode with an invalid assertion (in some cases) - fixed a typo that caused the default template for MySQL to be wrong. thanks to mildew for catching this. - added configuration file command $DebugPrintModuleList and $DebugPrintCfSysLineHandlerList - fixed an invalid value for the MARK timer - unfortunately, there was a testing aid left in place. This resulted in quite frequent MARK messages - added $IncludeConfig config directive - applied a patch from mildew to prevent rsyslogd from freezing under heavy load. This could happen when the queue was full. Now, we drop messages but rsyslogd remains active. --------------------------------------------------------------------------- Version 1.17.5 (rgerhards), 2007-07-30 - continued to work on output module modularization - fixed a missing file bug - thanks to Andrea Montanari for reporting this problem - fixed a problem with shutting down the worker thread and freeing the selector_t list - this caused messages to be lost, because the message queue was not properly drained before the selectors got destroyed. --------------------------------------------------------------------------- Version 1.17.4 (rgerhards), 2007-07-27 - continued to work on output module modularization - fixed a situation where rsyslogd could create zombie processes thanks to mildew for the patch - applied patch from Michel Samia to fix compilation when NOT compiled for pthreads --------------------------------------------------------------------------- Version 1.17.3 (rgerhards), 2007-07-25 - continued working on output module modularization - fixed a bug that caused rsyslogd to segfault on exit (and probably also on HUP), when there was an unsent message in a selector that required forwarding and the dns lookup failed for that selector (yes, it was pretty unlikely to happen;)) thanks to varmojfekoj for the patch - fixed a memory leak in config file parsing and die() thanks to varmojfekoj for the patch - rsyslogd now checks on startup if it is capable to perform any work at all. If it cant, it complains and terminates thanks to Michel Samia for providing the patch! - fixed a small memory leak when HUPing syslogd. The allowed sender list now gets freed. thanks to mildew for the patch. - changed the way error messages in early startup are logged. They now do no longer use the syslogd code directly but are rather send to stderr. --------------------------------------------------------------------------- Version 1.17.2 (rgerhards), 2007-07-23 - made the port part of the -r option optional. Needed for backward compatibility with sysklogd - replaced system() calls with something more reasonable. Please note that this might break compatibility with some existing configuration files. We accept this in favor of the gained security. - removed a memory leak that could occur if timegenerated was used in RFC 3164 format in templates - did some preparation in msg.c for advanced multithreading - placed the hooks, but not yet any active code - worked further on modularization - added $ModLoad MySQL (dummy) config directive - added DropTrailingLFOnReception config directive --------------------------------------------------------------------------- Version 1.17.1 (rgerhards), 2007-07-20 - fixed a bug that caused make install to install rsyslogd and rklogd under the wrong names - fixed bug that caused $AllowedSenders to handle IPv6 scopes incorrectly; also fixed but that could garble $AllowedSender wildcards. Thanks to mildew@gmail.com for the patch - minor code cleanup - thanks to Peter Vrabec for the patch - fixed minimal memory leak on HUP (caused by templates) thanks to varmojfekoj for the patch - fixed another memory leak on HUPing and on exiting rsyslogd again thanks to varmojfekoj for the patch - code cleanup (removed compiler warnings) - fixed portability bug in configure.ac - thanks to Bartosz Kuźma for patch - moved msg object into its own file set - added the capability to continue trying to write log files when the file system is full. Functionality based on patch by Martin Schulze to sysklogd package. --------------------------------------------------------------------------- Version 1.17.0 (RGer), 2007-07-17 - added $RepeatedLineReduction config parameter - added $EscapeControlCharactersOnReceive config parameter - added $ControlCharacterEscapePrefix config parameter - added $DirCreateMode config parameter - added $CreateDirs config parameter - added $DebugPrintTemplateList config parameter - added $ResetConfigVariables config parameter - added $FileOwner config parameter - added $FileGroup config parameter - added $DirOwner config parameter - added $DirGroup config parameter - added $FailOnChownFailure config parameter - added regular expression support to the filter engine thanks to Michel Samia for providing the patch! - enhanced $AllowedSender functionality. Credits to mildew@gmail.com for the patch doing that - added IPv6 support - allowed DNS hostnames - allowed DNS wildcard names - added new option $DropMsgsWithMaliciousDnsPTRRecords - added autoconf so that rfc3195d, rsyslogd and klogd are stored to /sbin - added capability to auto-create directories with dynaFiles --------------------------------------------------------------------------- Version 1.16.0 (RGer/Peter Vrabec), 2007-07-13 - The Friday, 13th Release ;) - build system switched to autotools - removed SYSV preprocessor macro use, replaced with autotools equivalents - fixed a bug that caused rsyslogd to segfault when TCP listening was disabled and it terminated - added new properties "syslogfacility-text" and "syslogseverity-text" thanks to varmojfekoj for the patch - added the -x option to disable hostname dns resolution thanks to varmojfekoj for the patch - begun to better modularize syslogd.c - this is an ongoing project; moved type definitions to a separate file - removed some now-unused fields from struct filed - move file size limit fields in struct field to the "right spot" (the file writing part of the union - f_un.f_file) - subdirectories linux and solaris are no longer part of the distribution package. This is not because we cease support for them, but there are no longer any files in them after the move to autotools --------------------------------------------------------------------------- Version 1.15.1 (RGer), 2007-07-10 - fixed a bug that caused a dynaFile selector to stall when there was an open error with one file - improved template processing for dynaFiles; templates are now only looked up during initialization - speeds up processing - optimized memory layout in struct filed when compiled with MySQL support - fixed a bug that caused compilation without SYSLOG_INET to fail - re-enabled the "last message repeated n times" feature. This feature was not taken care of while rsyslogd evolved from sysklogd and it was more or less defunct. Now it is fully functional again. - added system properties: $NOW, $YEAR, $MONTH, $DAY, $HOUR, $MINUTE - fixed a bug in iovAsString() that caused a memory leak under stress conditions (most probably memory shortage). This was unlikely to ever happen, but it doesn't hurt doing it right - cosmetic: defined type "uchar", change all unsigned chars to uchar --------------------------------------------------------------------------- Version 1.15.0 (RGer), 2007-07-05 - added ability to dynamically generate file names based on templates and thus properties. This was a much-requested feature. It makes life easy when it e.g. comes to splitting files based on the sender address. - added $umask and $FileCreateMode config file directives - applied a patch from Bartosz Kuzma to compile cleanly under NetBSD - checks for extra (unexpected) characters in system config file lines have been added - added IPv6 documentation - was accidentally missing from CVS - begun to change char to unsigned char --------------------------------------------------------------------------- Version 1.14.2 (RGer), 2007-07-03 ** this release fixes all known nits with IPv6 ** - restored capability to do /etc/service lookup for "syslog" service when -r 0 was given - documented IPv6 handling of syslog messages - integrate patch from Bartosz Kuźma to make rsyslog compile under Solaris again (the patch replaced a strndup() call, which is not available under Solaris - improved debug logging when waiting on select - updated rsyslogd man page with new options (-46A) --------------------------------------------------------------------------- Version 1.14.1 (RGer/Peter Vrabec), 2007-06-29 - added Peter Vrabec's patch for IPv6 TCP - prefixed all messages send to stderr in rsyslogd with "rsyslogd: " --------------------------------------------------------------------------- Version 1.14.0 (RGer/Peter Vrabec), 2007-06-28 - Peter Vrabec provided IPv6 for rsyslog, so we are now IPv6 enabled IPv6 Support is currently for UDP only, TCP is to come soon. AllowedSender configuration does not yet work for IPv6. - fixed code in iovCreate() that broke C's strict aliasing rules - fixed some char/unsigned char differences that forced the compiler to spit out warning messages - updated the Red Hat init script to fix a known issue (thanks to Peter Vrabec) --------------------------------------------------------------------------- Version 1.13.5 (RGer), 2007-06-22 - made the TCP session limit configurable via command line switch now -t , - added man page for rklogd(8) (basically a copy from klogd, but now there is one...) - fixed a bug that caused internal messages (e.g. rsyslogd startup) to appear without a tag. - removed a minor memory leak that occurred when TAG processing requalified a HOSTNAME to be a TAG (and a TAG already was set). - removed potential small memory leaks in MsgSet***() functions. There would be a leak if a property was re-set, something that happened extremely seldom. --------------------------------------------------------------------------- Version 1.13.4 (RGer), 2007-06-18 - added a new property "PRI-text", which holds the PRI field in textual form (e.g. "syslog.info") - added alias "syslogseverity" for "syslogpriority", which is a misleading property name that needs to stay for historical reasons (and backward-compatibility) - added doc on how to record PRI value in log file - enhanced signal handling in klogd, including removal of an unsafe call to the logging system during signal handling --------------------------------------------------------------------------- Version 1.13.3 (RGer), 2007-06-15 - create a version of syslog.c from scratch. This is now - highly optimized for rsyslog - removes an incompatible license problem as the original version had a BSD license with advertising clause - fixed in the regard that rklogd will continue to work when rsyslogd has been restarted (the original version, as well as sysklogd, will remain silent then) - solved an issue with an extra NUL char at message end that the original version had - applied some changes to klogd to care for the new interface - fixed a bug in syslogd.c which prevented compiling under debian --------------------------------------------------------------------------- Version 1.13.2 (RGer), 2007-06-13 - lib order in makefile patched to facilitate static linking - thanks to Bennett Todd for providing the patch - Integrated a patch from Peter Vrabec (pvrabec@redhat.com): - added klogd under the name of rklogd (remove dependency on original sysklogd package - createDB.sql now in UTF - added additional config files for use on Red Hat --------------------------------------------------------------------------- Version 1.13.1 (RGer), 2007-02-05 - changed the listen backlog limit to a more reasonable value based on the maximum number of TCP connections configured (10% + 5) - thanks to Guy Standen for the hint (actually, the limit was 5 and that was a left-over from early testing). - fixed a bug in makefile which caused DB-support to be disabled when NETZIP support was enabled - added the -e option to allow transmission of every message to remote hosts (effectively turns off duplicate message suppression) - (somewhat) improved memory consumption when compiled with MySQL support - looks like we fixed an incompatibility with MySQL 5.x and above software At least in one case, the remote server name was destroyed, leading to a connection failure. The new, improved code does not have this issue and so we see this as solved (the new code is generally somewhat better, so there is a good chance we fixed this incompatibility). --------------------------------------------------------------------------- Version 1.13.0 (RGer), 2006-12-19 - added '$' as ToPos property replacer specifier - means "up to the end of the string" - property replacer option "escape-cc", "drop-cc" and "space-cc" added - changed the handling of \0 characters inside syslog messages. We now consistently escape them to "#000". This is somewhat recommended in the draft-ietf-syslog-protocol-19 draft. While the real recommendation is to not escape any characters at all, we can not do this without considerable modification of the code. So we escape it to "#000", which is consistent with a sample found in the Internet-draft. - removed message glue logic (see printchopped() comment for details) Also caused removal of parts table and thus some improvements in memory usage. - changed the default MAXLINE to 2048 to take care of recent syslog standardization efforts (can easily be changed in syslogd.c) - added support for byte-counted TCP syslog messages (much like syslog-transport-tls-05 Internet Draft). This was necessary to support compression over TCP. - added support for receiving compressed syslog messages - added support for sending compressed syslog messages - fixed a bug where the last message in a syslog/tcp stream was lost if it was not properly terminated by a LF character --------------------------------------------------------------------------- Version 1.12.3 (RGer), 2006-10-04 - implemented some changes to support Solaris (but support is not yet complete) - commented out (via #if 0) some methods that are currently not being use but should be kept for further us - added (interim) -u 1 option to turn off hostname and tag parsing - done some modifications to better support Fedora - made the field delimiter inside property replace configurable via template - fixed a bug in property replacer: if fields were used, the delimitor became part of the field. Up until now, this was barely noticeable as the delimiter as TAB only and thus invisible to a human. With other delimiters available now, it quickly showed up. This bug fix might cause some grief to existing installations if they used the extra TAB for whatever reasons - sorry folks... Anyhow, a solution is easy: just add a TAB character constant into your template. Thus, there has no attempt been made to do this in a backwards-compatible way. --------------------------------------------------------------------------- Version 1.12.2 (RGer), 2006-02-15 - fixed a bug in the RFC 3339 date formatter. An extra space was added after the actual timestamp - added support for providing high-precision RFC3339 timestamps for (rsyslogd-)internally-generated messages - very (!) experimental support for syslog-protocol internet draft added (the draft is experimental, the code is solid ;)) - added support for field-extracting in the property replacer - enhanced the legacy-syslog parser so that it can interpret messages that do not contain a TIMESTAMP - fixed a bug that caused the default socket (usually /dev/log) to be opened even when -o command line option was given - fixed a bug in the Debian sample startup script - it caused rsyslogd to listen to remote requests, which it shouldn't by default --------------------------------------------------------------------------- Version 1.12.1 (RGer), 2005-11-23 - made multithreading work with BSD. Some signal-handling needed to be restructured. Also, there might be a slight delay of up to 10 seconds when huping and terminating rsyslogd under BSD - fixed a bug where a NULL-pointer was passed to printf() in logmsg(). - fixed a bug during "make install" where rc3195d was not installed Thanks to Bennett Todd for spotting this. - fixed a bug where rsyslogd dumped core when no TAG was found in the received message - enhanced message parser so that it can deal with missing hostnames in many cases (may not be totally fail-safe) - fixed a bug where internally-generated messages did not have the correct TAG --------------------------------------------------------------------------- Version 1.12.0 (RGer), 2005-10-26 - moved to a multi-threaded design. single-threading is still optionally available. Multi-threading is experimental! - fixed a potential race condition. In the original code, marking was done by an alarm handler, which could lead to all sorts of bad things. This has been changed now. See comments in syslogd.c/domark() for details. - improved debug output for property-based filters - not a code change, but: I have checked all exit()s to make sure that none occurs once rsyslogd has started up. Even in unusual conditions (like low-memory conditions) rsyslogd somehow remains active. Of course, it might loose a message or two, but at least it does not abort and it can also recover when the condition no longer persists. - fixed a bug that could cause loss of the last message received immediately before rsyslogd was terminated. - added comments on thread-safety of global variables in syslogd.c - fixed a small bug: spurios printf() when TCP syslog was used - fixed a bug that causes rsyslogd to dump core on termination when one of the selector lines did not receive a message during the run (very unlikely) - fixed an one-too-low memory allocation in the TCP sender. Could result in rsyslogd dumping core. - fixed a bug with regular expression support (thanks to Andres Riancho) - a little bit of code restructuring (especially main(), which was horribly large) --------------------------------------------------------------------------- Version 1.11.1 (RGer), 2005-10-19 - support for BSD-style program name and host blocks - added a new property "programname" that can be used in templates - added ability to specify listen port for rfc3195d - fixed a bug that rendered the "startswith" comparison operation unusable. - changed more functions to "static" storage class to help compiler optimize (should have been static in the first place...) - fixed a potential memory leak in the string buffer class destructor. As the destructor was previously never called, the leak did not actually appear. - some internal restructuring in anticipation/preparation of minimal multi-threading support - rsyslogd still shares some code with the sysklogd project. Some patches for this shared code have been brought over from the sysklogd CVS. --------------------------------------------------------------------------- Version 1.11.0 (RGer), 2005-10-12 - support for receiving messages via RFC 3195; added rfc3195d for that purpose - added an additional guard to prevent rsyslogd from aborting when the 2gb file size limit is hit. While a user can configure rsyslogd to handle such situations, it would abort if that was not done AND large file support was not enabled (ok, this is hopefully an unlikely scenario) - fixed a bug that caused additional Unix domain sockets to be incorrectly processed - could lead to message loss in extreme cases --------------------------------------------------------------------------- Version 1.10.2 (RGer), 2005-09-27 - added comparison operations in property-based filters: * isequal * startswith - added ability to negate all property-based filter comparison operations by adding a !-sign right in front of the operation name - added the ability to specify remote senders for UDP and TCP received messages. Allows to block all but well-known hosts - changed the $-config line directives to be case-INsensitive - new command line option -w added: "do not display warnings if messages from disallowed senders are received" - fixed a bug that caused rsyslogd to dump core when the compare value was not quoted in property-based filters - fixed a bug in the new CStr compare function which lead to invalid results (fortunately, this function was not yet used widely) - added better support for "debugging" rsyslog.conf property filters (only if -d switch is given) - changed some function definitions to static, which eventually enables some compiler optimizations - fixed a bug in MySQL code; when a SQL error occurred, rsyslogd could run in a tight loop. This was due to invalid sequence of error reporting and is now fixed. --------------------------------------------------------------------------- Version 1.10.1 (RGer), 2005-09-23 - added the ability to execute a shell script as an action. Thanks to Bjoern Kalkbrenner for providing the code! - fixed a bug in the MySQL code; due to the bug the automatic one-time retry after an error did not happen - this lead to error message in cases where none should be seen (e.g. after a MySQL restart) - fixed a security issue with SQL-escaping in conjunction with non-(SQL-)standard MySQL features. --------------------------------------------------------------------------- Version 1.10.0 (RGer), 2005-09-20 REMINDER: 1.10 is the first unstable version if the 1.x series! - added the capability to filter on any property in selector lines (not just facility and priority) - changed stringbuf into a new counted string class - added support for a "discard" action. If a selector line with discard (~ character) is found, no selector lines *after* that line will be processed. - thanks to Andres Riancho, regular expression support has been added to the template engine - added the FROMHOST property in the template processor, which could previously not be obtained. Thanks to Cristian Testa for pointing this out and even providing a fix. - added display of compile-time options to -v output - performance improvement for production build - made some checks to happen only during debug mode - fixed a problem with compiling on SUSE and - while doing so - removed the socket call to set SO_BSDCOMPAT in cases where it is obsolete. --------------------------------------------------------------------------- Version 1.0.4 (RGer), 2006-02-01 - a small but important fix: the tcp receiver had two forgotten printf's in it that caused a lot of unnecessary output to stdout. This was important enough to justify a new release --------------------------------------------------------------------------- Version 1.0.3 (RGer), 2005-11-14 - added an additional guard to prevent rsyslogd from aborting when the 2gb file size limit is hit. While a user can configure rsyslogd to handle such situations, it would abort if that was not done AND large file support was not enabled (ok, this is hopefully an unlikely scenario) - fixed a bug that caused additional Unix domain sockets to be incorrectly processed - could lead to message loss in extreme cases - applied some patches available from the sysklogd project to code shared from there - fixed a bug that causes rsyslogd to dump core on termination when one of the selector lines did not receive a message during the run (very unlikely) - fixed an one-too-low memory allocation in the TCP sender. Could result in rsyslogd dumping core. - fixed a bug in the TCP sender that caused the retry logic to fail after an error or receiver overrun - fixed a bug in init() that could lead to dumping core - fixed a bug that could lead to dumping core when no HOSTNAME or no TAG was present in the syslog message --------------------------------------------------------------------------- Version 1.0.2 (RGer), 2005-10-05 - fixed an issue with MySQL error reporting. When an error occurred, the MySQL driver went into an endless loop (at least in most cases). --------------------------------------------------------------------------- Version 1.0.1 (RGer), 2005-09-23 - fixed a security issue with SQL-escaping in conjunction with non-(SQL-)standard MySQL features. --------------------------------------------------------------------------- Version 1.0.0 (RGer), 2005-09-12 - changed install doc to cover daily cron scripts - a trouble source - added rc script for slackware (provided by Chris Elvidge - thanks!) - fixed a really minor bug in usage() - the -r option was still reported as without the port parameter --------------------------------------------------------------------------- Version 0.9.8 (RGer), 2005-09-05 - made startup and shutdown message more consistent and included the pid, so that they can be easier correlated. Used syslog-protocol structured data format for this purpose. - improved config info in startup message, now tells not only if it is listening remote on udp, but also for tcp. Also includes the port numbers. The previous startup message was misleading, because it did not say "remote reception" if rsyslogd was only listening via tcp (but not via udp). - added a "how can you help" document to the doc set --------------------------------------------------------------------------- Version 0.9.7 (RGer), 2005-08-15 - some of the previous doc files (like INSTALL) did not properly reflect the changes to the build process and the new doc. Fixed that. - changed syslogd.c so that when compiled without database support, an error message is displayed when a database action is detected in the config file (previously this was used as an user rule ;)) - fixed a bug in the os-specific Makefiles which caused MySQL support to not be compiled, even if selected --------------------------------------------------------------------------- Version 0.9.6 (RGer), 2005-08-09 - greatly enhanced documentation. Now available in html format in the "doc" folder and FreeBSD. Finally includes an install howto. - improved MySQL error messages a little - they now show up as log messages, too (formerly only in debug mode) - added the ability to specify the listen port for udp syslog. WARNING: This introduces an incompatibility. Formerly, udp syslog was enabled by the -r command line option. Now, it is "-r [port]", which is consistent with the tcp listener. However, just -r will now return an error message. - added sample startup scripts for Debian and FreeBSD - added support for easy feature selection in the makefile. Un- fortunately, this also means I needed to spilt the make file for different OS and distros. There are some really bad syntax differences between FreeBSD and Linux make. --------------------------------------------------------------------------- Version 0.9.5 (RGer), 2005-08-01 - the "semicolon bug" was actually not (fully) solved in 0.9.4. One part of the bug was solved, but another still existed. This one is fixed now, too. - the "semicolon bug" actually turned out to be a more generic bug. It appeared whenever an invalid template name was given. With some selector actions, rsyslogd dumped core, with other it "just" had a small resource leak with others all worked well. These anomalies are now fixed. Note that they only appeared during system initialization once the system was running, nothing bad happened. - improved error reporting for template errors on startup. They are now shown on the console and the start-up tty. Formerly, they were only visible in debug mode. - support for multiple instances of rsyslogd on a single machine added - added new option "-o" --> omit local unix domain socket. This option enables rsyslogd NOT to listen to the local socket. This is most helpful when multiple instances of rsyslogd (or rsyslogd and another syslogd) shall run on a single system. - added new option "-i " which allows one to specify the pidfile. This is needed when multiple instances of rsyslogd are to be run. - the new project home page is now online at www.rsyslog.com --------------------------------------------------------------------------- Version 0.9.4 (RGer), 2005-07-25 - finally added the TCP sender. It now supports non-blocking mode, no longer disabling message reception during connect. As it is now, it is usable in production. The code could be more sophisticated, but I've kept it short in anticipation of the move to liblogging, which will lead to the removal of the code just written ;) - the "exiting on signal..." message still had the "syslogd" name in it. Changed this to "rsyslogd", as we do not have a large user base yet, this should pose no problem. - fixed "the semicolon" bug. rsyslogd dumped core if a write-db action was specified but no semicolon was given after the password (an empty template was ok, but the semicolon needed to be present). - changed a default for traditional output format. During testing, it was seen that the timestamp written to file in default format was the time of message reception, not the time specified in the TIMESTAMP field of the message itself. Traditionally, the message TIMESTAMP is used and this has been changed now. --------------------------------------------------------------------------- Version 0.9.3 (RGer), 2005-07-19 - fixed a bug in the message parser. In June, the RFC 3164 timestamp was not correctly parsed (yes, only in June and some other months, see the code comment to learn why...) - added the ability to specify the destination port when forwarding syslog messages (both for TCP and UDP) - added an very experimental TCP sender (activated by @@machine:port in config). This is not yet for production use. If the receiver is not alive, rsyslogd will wait quite some time until the connection request times out, which most probably leads to loss of incoming messages. --------------------------------------------------------------------------- Version 0.9.2 (RGer), around 2005-07-06 - I intended to change the maxsupported message size to 32k to support IHE - but given the memory inefficiency in the usual use cases, I have not done this. I have, however, included very specific instructions on how to do this in the source code. I have also done some testing with 32k messages, so you can change the max size without taking too much risk. - added a syslog/tcp receiver; we now can receive messages via plain tcp, but we can still send only via UDP. The syslog/tcp receiver is the primary enhancement of this release. - slightly changed some error messages that contained a spurios \n at the end of the line (which gives empty lines in your log...) --------------------------------------------------------------------------- Version 0.9.1 (RGer) - fixed code so that it compiles without errors under FreeBSD - removed now unused function "allocate_log()" from syslogd.c - changed the make file so that it contains more defines for different environments (in the long term, we need a better system for disabling/enabling features...) - changed some printf's printing off_t types to %lld and explicit (long long) casts. I tried to figure out the exact type, but did not succeed in this. In the worst case, ultra-large peta- byte files will now display funny informational messages on rollover, something I think we can live with for the next 10 years or so... --------------------------------------------------------------------------- Version 0.9.0 (RGer) - changed the filed structure to be a linked list. Previously, it was a table - well, for non-SYSV it was defined as linked list, but from what I see that code did no longer work after my modifications. I am now using a linked list in general because that is needed for other upcoming modifications. - fixed a bug that caused rsyslogd not to listen to anything if the configuration file could not be read - previous versions disabled network logging (send/receive) if syslog/udp port was not in /etc/services. Now defaulting to port 514 in this case. - internal error messages are now supported up to 256 bytes - error message seen during config file read are now also displayed to the attached tty and not only the console - changed some error messages during init to be sent to the console and/or emergency log. Previously, they were only seen if the -d (debug) option was present on the command line. - fixed the "2gb file issue on 32bit systems". If a file grew to more than 2gb, the syslogd was aborted with "file size exceeded". Now, defines have been added according to http://www.daimi.au.dk/~kasperd/comp.os.linux.development.faq.html#LARGEFILE Testing revealed that they work ;) HOWEVER, if your file system, glibc, kernel, whatever does not support files larger 2gb, you need to set a file size limit with the new output channel mechanism. - updated man pages to reflect the changes --------------------------------------------------------------------------- Version 0.8.4 - improved -d debug output (removed developer-only content) - now compiles under FreeBSD and NetBSD (only quick testing done on NetBSD) --------------------------------------------------------------------------- Version 0.8.3 - security model in "make install" changed - minor doc updates --------------------------------------------------------------------------- Version 0.8.2 - added man page for rsyslog.conf and rsyslogd - gave up on the concept of rsyslog being a "drop in" replacement for syslogd. Now, the user installs rsyslogd and also needs to adjust his system settings to this specifically. This also lead to these changes: * changed Makefile so that install now installs rsyslogd instead of dealing with syslogd * changed the default config file name to rsyslog.conf --------------------------------------------------------------------------- Version 0.8.1 - fixed a nasty memory leak (probably not the last one with this release) - some enhancements to Makefile as suggested by Bennett Todd - syslogd-internal messages (like restart) were missing the hostname this has been corrected --------------------------------------------------------------------------- Version 0.8.0 Initial testing release. Based on the sysklogd package. Thanks to the sysklogd maintainers for all their good work! --------------------------------------------------------------------------- ---------------------------------------------------------------------- The following comments were left in the syslogd source. While they provide not too much detail, the help to date when Rainer started work on the project (which was 2003, now even surprising for Rainer himself ;)). * \author Rainer Gerhards * \date 2003-10-17 * Some initial modifications on the sysklogd package to support * liblogging. These have actually not yet been merged to the * source you see currently (but they hopefully will) * * \date 2004-10-28 * Restarted the modifications of sysklogd. This time, we * focus on a simpler approach first. The initial goal is to * provide MySQL database support (so that syslogd can log * to the database). ---------------------------------------------------------------------- The following comments are from the stock syslogd.c source. They provide some insight into what happened to the source before we forked rsyslogd. However, much of the code already has been replaced and more is to be replaced. So over time, these comments become less valuable. I have moved them out of the syslogd.c file to shrink it, especially as a lot of them do no longer apply. For historical reasons and understanding of how the daemon evolved, they are probably still helpful. * Author: Eric Allman * extensive changes by Ralph Campbell * more extensive changes by Eric Allman (again) * * Steve Lord: Fix UNIX domain socket code, added linux kernel logging * change defines to * SYSLOG_INET - listen on a UDP socket * SYSLOG_UNIXAF - listen on unix domain socket * SYSLOG_KERNEL - listen to linux kernel * * Mon Feb 22 09:55:42 CST 1993: Dr. Wettstein * Additional modifications to the source. Changed priority scheme * to increase the level of configurability. In its stock configuration * syslogd no longer logs all messages of a certain priority and above * to a log file. The * wildcard is supported to specify all priorities. * Note that this is a departure from the BSD standard. * * Syslogd will now listen to both the inetd and the unixd socket. The * strategy is to allow all local programs to direct their output to * syslogd through the unixd socket while the program listens to the * inetd socket to get messages forwarded from other hosts. * * Fri Mar 12 16:55:33 CST 1993: Dr. Wettstein * Thanks to Stephen Tweedie (dcs.ed.ac.uk!sct) for helpful bug-fixes * and an enlightened commentary on the prioritization problem. * * Changed the priority scheme so that the default behavior mimics the * standard BSD. In this scenario all messages of a specified priority * and above are logged. * * Add the ability to specify a wildcard (=) as the first character * of the priority name. Doing this specifies that ONLY messages with * this level of priority are to be logged. For example: * * *.=debug /usr/adm/debug * * Would log only messages with a priority of debug to the /usr/adm/debug * file. * * Providing an * as the priority specifies that all messages are to be * logged. Note that this case is degenerate with specifying a priority * level of debug. The wildcard * was retained because I believe that * this is more intuitive. * * Thu Jun 24 11:34:13 CDT 1993: Dr. Wettstein * Modified sources to incorporate changes in libc4.4. Messages from * syslog are now null-terminated, syslogd code now parses messages * based on this termination scheme. Linux as of libc4.4 supports the * fsync system call. Modified code to fsync after all writes to * log files. * * Sat Dec 11 11:59:43 CST 1993: Dr. Wettstein * Extensive changes to the source code to allow compilation with no * complaints with -Wall. * * Reorganized the facility and priority name arrays so that they * compatible with the syslog.h source found in /usr/include/syslog.h. * NOTE that this should really be changed. The reason I do not * allow the use of the values defined in syslog.h is on account of * the extensions made to allow the wildcard character in the * priority field. To fix this properly one should malloc an array, * copy the contents of the array defined by syslog.h and then * make whatever modifications that are desired. Next round. * * Thu Jan 6 12:07:36 CST 1994: Dr. Wettstein * Added support for proper decomposition and re-assembly of * fragment messages on UNIX domain sockets. Lack of this capability * was causing 'partial' messages to be output. Since facility and * priority information is encoded as a leader on the messages this * was causing lines to be placed in erroneous files. * * Also added a patch from Shane Alderton (shane@ion.apana.org.au) to * correct a problem with syslogd dumping core when an attempt was made * to write log messages to a logged-on user. Thank you. * * Many thanks to Juha Virtanen (jiivee@hut.fi) for a series of * interchanges which lead to the fixing of problems with messages set * to priorities of none and emerg. Also thanks to Juha for a patch * to exclude users with a class of LOGIN from receiving messages. * * Shane Alderton provided an additional patch to fix zombies which * were conceived when messages were written to multiple users. * * Mon Feb 6 09:57:10 CST 1995: Dr. Wettstein * Patch to properly reset the single priority message flag. Thanks * to Christopher Gori for spotting this bug and forwarding a patch. * * Wed Feb 22 15:38:31 CST 1995: Dr. Wettstein * Added version information to startup messages. * * Added defines so that paths to important files are taken from * the definitions in paths.h. Hopefully this will insure that * everything follows the FSSTND standards. Thanks to Chris Metcalf * for a set of patches to provide this functionality. Also thanks * Elias Levy for prompting me to get these into the sources. * * Wed Jul 26 18:57:23 MET DST 1995: Martin Schulze * Linux' gethostname only returns the hostname and not the fqdn as * expected in the code. But if you call hostname with an fqdn then * gethostname will return an fqdn, so we have to mention that. This * has been changed. * * The 'LocalDomain' and the hostname of a remote machine is * converted to lower case, because the original caused some * inconsistency, because the (at least my) nameserver did respond an * fqdn containing of upper- _and_ lowercase letters while * 'LocalDomain' consisted only of lowercase letters and that didn't * match. * * Sat Aug 5 18:59:15 MET DST 1995: Martin Schulze * Now no messages that were received from any remote host are sent * out to another. At my domain this missing feature caused ugly * syslog-loops, sometimes. * * Remember that no message is sent out. I can't figure out any * scenario where it might be useful to change this behavior and to * send out messages to other hosts than the one from which we * received the message, but I might be shortsighted. :-/ * * Thu Aug 10 19:01:08 MET DST 1995: Martin Schulze * Added my pidfile.[ch] to it to perform a better handling with * pidfiles. Now both, syslogd and klogd, can only be started * once. They check the pidfile. * * Sun Aug 13 19:01:41 MET DST 1995: Martin Schulze * Add an addition to syslog.conf's interpretation. If a priority * begins with an exclamation mark ('!') the normal interpretation * of the priority is inverted: ".!*" is the same as ".none", ".!=info" * don't logs the info priority, ".!crit" won't log any message with * the priority crit or higher. For example: * * mail.*;mail.!=info /usr/adm/mail * * Would log all messages of the facility mail except those with * the priority info to /usr/adm/mail. This makes the syslogd * much more flexible. * * Defined TABLE_ALLPRI=255 and changed some occurrences. * * Sat Aug 19 21:40:13 MET DST 1995: Martin Schulze * Making the table of facilities and priorities while in debug * mode more readable. * * If debugging is turned on, printing the whole table of * facilities and priorities every hexadecimal or 'X' entry is * now 2 characters wide. * * The number of the entry is prepended to each line of * facilities and priorities, and F_UNUSED lines are not shown * anymore. * * Corrected some #ifdef SYSV's. * * Mon Aug 21 22:10:35 MET DST 1995: Martin Schulze * Corrected a strange behavior during parsing of configuration * file. The original BSD syslogd doesn't understand spaces as * separators between specifier and action. This syslogd now * understands them. The old behavior caused some confusion over * the Linux community. * * Thu Oct 19 00:02:07 MET 1995: Martin Schulze * The default behavior has changed for security reasons. The * syslogd will not receive any remote message unless you turn * reception on with the "-r" option. * * Not defining SYSLOG_INET will result in not doing any network * activity, i.e. not sending or receiving messages. I changed * this because the old idea is implemented with the "-r" option * and the old thing didn't work anyway. * * Thu Oct 26 13:14:06 MET 1995: Martin Schulze * Added another logfile type F_FORW_UNKN. The problem I ran into * was a name server that runs on my machine and a forwarder of * kern.crit to another host. The hosts address can only be * fetched using the nameserver. But named is started after * syslogd, so syslogd complained. * * This logfile type will retry to get the address of the * hostname ten times and then complain. This should be enough to * get the named up and running during boot sequence. * * Fri Oct 27 14:08:15 1995: Dr. Wettstein * Changed static array of logfiles to a dynamic array. This * can grow during process. * * Fri Nov 10 23:08:18 1995: Martin Schulze * Inserted a new tabular sys_h_errlist that contains plain text * for error codes that are returned from the net subsystem and * stored in h_errno. I have also changed some wrong lookups to * sys_errlist. * * Wed Nov 22 22:32:55 1995: Martin Schulze * Added the fabulous strip-domain feature that allows us to * strip off (several) domain names from the fqdn and only log * the simple hostname. This is useful if you're in a LAN that * has a central log server and also different domains. * * I have also also added the -l switch do define hosts as * local. These will get logged with their simple hostname, too. * * Thu Nov 23 19:02:56 MET DST 1995: Martin Schulze * Added the possibility to omit fsyncing of logfiles after every * write. This will give some performance back if you have * programs that log in a very verbose manner (like innd or * smartlist). Thanks to Stephen R. van den Berg * for the idea. * * Thu Jan 18 11:14:36 CST 1996: Dr. Wettstein * Added patch from beta-testers to stop compile error. Also * added removal of pid file as part of termination cleanup. * * Wed Feb 14 12:42:09 CST 1996: Dr. Wettstein * Allowed forwarding of messages received from remote hosts to * be controlled by a command-line switch. Specifying -h allows * forwarding. The default behavior is to disable forwarding of * messages which were received from a remote host. * * Parent process of syslogd does not exit until child process has * finished initialization process. This allows rc.* startup to * pause until syslogd facility is up and operating. * * Re-arranged the select code to move UNIX domain socket accepts * to be processed later. This was a contributed change which * has been proposed to correct the delays sometimes encountered * when syslogd starts up. * * Minor code cleanups. * * Thu May 2 15:15:33 CDT 1996: Dr. Wettstein * Fixed bug in init function which resulted in file descriptors * being orphaned when syslogd process was re-initialized with SIGHUP * signal. Thanks to Edvard Tuinder * (Edvard.Tuinder@praseodymium.cistron.nl) for putting me on the * trail of this bug. I am amazed that we didn't catch this one * before now. * * Tue May 14 00:03:35 MET DST 1996: Martin Schulze * Corrected a mistake that causes the syslogd to stop logging at * some virtual consoles under Linux. This was caused by checking * the wrong error code. Thanks to Michael Nonweiler * for sending me a patch. * * Mon May 20 13:29:32 MET DST 1996: Miquel van Smoorenburg * Added continuation line supported and fixed a bug in * the init() code. * * Tue May 28 00:58:45 MET DST 1996: Martin Schulze * Corrected behavior of blocking pipes - i.e. the whole system * hung. Michael Nonweiler has sent us * a patch to correct this. A new logfile type F_PIPE has been * introduced. * * Mon Feb 3 10:12:15 MET DST 1997: Martin Schulze * Corrected behavior of logfiles if the file can't be opened. * There was a bug that causes syslogd to try to log into non * existing files which ate cpu power. * * Sun Feb 9 03:22:12 MET DST 1997: Martin Schulze * Modified syslogd.c to not kill itself which confuses bash 2.0. * * Mon Feb 10 00:09:11 MET DST 1997: Martin Schulze * Improved debug code to decode the numeric facility/priority * pair into textual information. * * Tue Jun 10 12:35:10 MET DST 1997: Martin Schulze * Corrected freeing of logfiles. Thanks to Jos Vos * for reporting the bug and sending an idea to fix the problem. * * Tue Jun 10 12:51:41 MET DST 1997: Martin Schulze * Removed sleep(10) from parent process. This has caused a slow * startup in former times - and I don't see any reason for this. * * Sun Jun 15 16:23:29 MET DST 1997: Michael Alan Dorman * Some more glibc patches made by . * * Thu Jan 1 16:04:52 CET 1998: Martin Schulze . * This included some balance parentheses for emacs and a bug in * the exclamation mark handling. * * Fixed small bug which caused syslogd to write messages to the * wrong logfile under some very rare conditions. Thanks to * Herbert Xu for fiddling this out. * * Thu Jan 8 22:46:35 CET 1998: Martin Schulze * Reworked one line of the above patch as it prevented syslogd * from binding the socket with the result that no messages were * forwarded to other hosts. * * Sat Jan 10 01:33:06 CET 1998: Martin Schulze * Fixed small bugs in F_FORW_UNKN mechanism. Thanks to Torsten * Neumann for pointing me to it. * * Mon Jan 12 19:50:58 CET 1998: Martin Schulze * Modified debug output concerning remote reception. * * Mon Feb 23 23:32:35 CET 1998: Topi Miettinen * Re-worked handling of Unix and UDP sockets to support closing / * opening of them in order to have it open only if it is needed * either for forwarding to a remote host or by reception from * the network. * * Wed Feb 25 10:54:09 CET 1998: Martin Schulze * Fixed little comparison mistake that prevented the MARK * feature to work properly. * * Wed Feb 25 13:21:44 CET 1998: Martin Schulze * Corrected Topi's patch as it prevented forwarding during * startup due to an unknown LogPort. * * Sat Oct 10 20:01:48 CEST 1998: Martin Schulze * Added support for TESTING define which will turn syslogd into * stdio-mode used for debugging. * * Sun Oct 11 20:16:59 CEST 1998: Martin Schulze * Reworked the initialization/fork code. Now the parent * process activates a signal handler which the daughter process * will raise if it is initialized. Only after that one the * parent process may exit. Otherwise klogd might try to flush * its log cache while syslogd can't receive the messages yet. * * Mon Oct 12 13:30:35 CEST 1998: Martin Schulze * Redirected some error output with regard to argument parsing to * stderr. * * Mon Oct 12 14:02:51 CEST 1998: Martin Schulze * Applied patch provided vom Topi Miettinen with regard to the * people from OpenBSD. This provides the additional '-a' * argument used for specifying additional UNIX domain sockets to * listen to. This is been used with chroot()'ed named's for * example. See for http://www.psionic.com/papers/dns.html * * Mon Oct 12 18:29:44 CEST 1998: Martin Schulze * Added `ftp' facility which was introduced in glibc version 2. * It's #ifdef'ed so won't harm with older libraries. * * Mon Oct 12 19:59:21 MET DST 1998: Martin Schulze * Code cleanups with regard to bsd -> posix transition and * stronger security (buffer length checking). Thanks to Topi * Miettinen * . index() --> strchr() * . sprintf() --> snprintf() * . bcopy() --> memcpy() * . bzero() --> memset() * . UNAMESZ --> UT_NAMESIZE * . sys_errlist --> strerror() * * Mon Oct 12 20:22:59 CEST 1998: Martin Schulze * Added support for setutent()/getutent()/endutent() instead of * binary reading the UTMP file. This is the the most portable * way. This allows /var/run/utmp format to change, even to a * real database or utmp daemon. Also if utmp file locking is * implemented in libc, syslog will use it immediately. Thanks * to Topi Miettinen . * * Mon Oct 12 20:49:18 MET DST 1998: Martin Schulze * Avoid logging of SIGCHLD when syslogd is in the process of * exiting and closing its files. Again thanks to Topi. * * Mon Oct 12 22:18:34 CEST 1998: Martin Schulze * Modified printline() to support 8bit characters - such as * russian letters. Thanks to Vladas Lapinskas . * * Sat Nov 14 02:29:37 CET 1998: Martin Schulze * ``-m 0'' now turns of MARK logging entirely. * * Tue Jan 19 01:04:18 MET 1999: Martin Schulze * Finally fixed an error with `-a' processing, thanks to Topi * Miettinen . * * Sun May 23 10:08:53 CEST 1999: Martin Schulze * Removed superfluous call to utmpname(). The path to the utmp * file is defined in the used libc and should not be hardcoded * into the syslogd binary referring the system it was compiled on. * * Sun Sep 17 20:45:33 CEST 2000: Martin Schulze * Fixed some bugs in printline() code that did not escape * control characters '\177' through '\237' and contained a * single-byte buffer overflow. Thanks to Solar Designer * . * * Sun Sep 17 21:26:16 CEST 2000: Martin Schulze * Don't close open sockets upon reload. Thanks to Bill * Nottingham. * * Mon Sep 18 09:10:47 CEST 2000: Martin Schulze * Fixed bug in printchopped() that caused syslogd to emit * kern.emerg messages when splitting long lines. Thanks to * Daniel Jacobowitz for the fix. * * Mon Sep 18 15:33:26 CEST 2000: Martin Schulze * Removed unixm/unix domain sockets and switch to Datagram Unix * Sockets. This should remove one possibility to play DoS with * syslogd. Thanks to Olaf Kirch for the patch. * * Sun Mar 11 20:23:44 CET 2001: Martin Schulze * Don't return a closed fd if `-a' is called with a wrong path. * Thanks to Bill Nottingham for providing * a patch.